User manual
Table Of Contents
- IMPORTANT SAFEGUARDS
- Read this first
- Notes on using your camera
- Table of Contents
- Preparing the camera
- Before your operation
- Shooting images
- Using the shooting function
- Selecting the focus method
- Zooming in in one step
- Using the flash
- Adjusting the brightness of the image (Exposure, Flash compensation, Metering)
- Shooting with fixed brightness (AE Lock)
- Using brightness compensation for the entire image (Exposure compensation)
- Adjusting the amount of flash light (Flash compensation)
- Selecting the flash control mode to set the amount of flash light (Flash control)
- Selecting the method for measuring the brightness of a subject (Metering mode)
- Setting ISO
- Adjusting the color tones (White balance)
- Image processing
- @/@ Selecting the drive mode
- Using the viewing function
- Changing your setup
- Viewing images on a computer
- Printing images
- Others
- Index
128
Stage 1: Connecting the camera and your computer
1 Insert a memory card with recorded images into the camera.
2 Insert the sufficiently charged battery pack in the camera, or
connect the camera to a wall outlet (wall socket) with the AC
Adaptor/charger (not supplied).
• When you copy images to your computer using insufficient battery pack,
copying may fail or image data may become corrupted if the battery pack
shuts down too soon.
3 Turn on the camera and the computer.
4 Check that [USB connection] in 2 is set to [Mass Storage].
5 Connect the camera and your
computer.
• The AutoPlay wizard appears on the
desktop.
1 To the USB
terminal
USB cable
2 To the
USB terminal