Help Guide

Help Guide
Interchangeable Lens Digital Camera
ILCE-1 α1
Basic icons
This section describes the screen display when the shooting mode is
(Program Auto).
The examples are of the display when the screen is in the all-information display mode.
The displayed content and positions are for reference only, and may differ from the actual display. Some icons may
not be displayed depending on the camera settings.
During still image shooting
During movie recording
The mode dial is set to
(Program Auto).1.
Number of the memory card slot recording the shooting data2.
Number of still images that can be recorded on the memory card in the slot indicated by 23.
[JPEG/HEIF Switch] is set to [JPEG]. [Image Quality Settings] → [JPEG Quality] is set to [Fine].4.
[Image Quality Settings] → [JPEG Image Size] is set to [M: 21M].5.
[
SteadyShot] is set to [On].6.
[Touch Func. in Shooting] is set to [Touch Tracking].7.
Remaining battery level8.
[
Metering Mode] is set to [Multi].9.
Displayed when [AF Illuminator] is set to [Auto] and the camera detects that the AF Illuminator is required10.
NFC is active. [Smartphone Connection] is set to [On].11.
[
White Balance] is set to [Auto].12.
[D-Range Optimizer: Auto] is selected.13.
[
Creative Look] is set to [ST].14.
[
Picture Profile] is set to [Off].15.
The drive mode is set to
(Single Shooting).16.
The focus mode is set to AF-S (Single-shot AF).17.
[
Focus Area] is set to [Wide].18.
[Shutter Type] is set to [Auto].19.
[
Face/Eye Prior. in AF] is set to [On].20.
Shutter speed21.
Aperture value22.
Exposure compensation23.
[
ISO] is set to [ISO AUTO].24.
[
Shooting] is set to [On] or [Auto], and the recordable area is the APS-C-equivalent size.25.
71