Help Guide

To remove the cable protector
Loosen the attachment screw, and then remove the cable protector.
Related Topic
Front side
Rear side
Top side
Bottom
5-025-537-11(1) Copyright 2021 Sony Corporation
Fit the hook (A) of the cable protector into the notch (B) below the USB Type-C terminal, and attach it so that it
covers the terminal surface of the camera while pressing down to keep it from coming off.
2.
Push the attachment screw (C) in and turn it to secure the cable protector.
3.
Insert the cable into one of the jacks.4.
Insert the cable into the holding part and then secure the cable with the fixing dial (D).
5.
43