lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB01COV_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 1 Thursday, January 13, 2005 3:28 PM 2-549-736-11(1) DVD Home Theatre System Operating Instructions Owner’s Record The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Serial No. Model No.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB02REG_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.book Page 2 Thursday, January 13, 2005 3:28 PM WARNING WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. And don’t place lighted candles on the apparatus.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB02REG_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 3 Thursday, January 13, 2005 3:28 PM About area codes About This Manual • The instructions in this manual are for model HT-9900M, HT-6900DP and HT-5950DP. Check your receiver’s model number by looking at the lower right corner of the front panel. In this manual, HT-9900M is used for illustration purposes unless stated otherwise.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB01COV_HT-5950DP-UTOC.fm] masterpage:Left GB01COV_HT-5950DP-U.book Page 4 Thursday, January 13, 2005 3:28 PM Table of Contents Getting Started 1: Check how to hookup your components....................................... 5 1a: Connecting components with digital audio output jacks ........... 7 1b: Connecting components with multi channel output jacks........ 10 1c: Connecting components with only analog audio jacks ............
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB03CON_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 5 Thursday, January 13, 2005 3:28 PM Getting Started Steps 1a through 1c beginning on page 7 describe how to hook up your components to this receiver. Before you begin, refer to “Connectable components” below for the pages which describe how to connect each component. After hooking up all your components, proceed to “2: Connecting the antennas” (page 14).
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB03CON_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.book Page 6 Thursday, January 13, 2005 3:28 PM Required cords The hookup diagrams on the subsequent pages assume the use of the following optional connection cords (A to G) (not supplied unless indicated).
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB03CON_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 7 Thursday, January 13, 2005 3:28 PM . 1a: Connecting components with digital audio output jacks Getting Started Hooking up a DVD player, TV monitor or satellite tuner For details on the required cords (A–G), see page 6. 1 Connect the audio jacks.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB03CON_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.book Page 8 Thursday, January 13, 2005 3:28 PM 2 Connect the video jacks. The following illustration shows how to connect a TV or satellite tuner and a DVD player with COMPONENT VIDEO (Y, PB/CB/B-Y, PR/CR/R-Y) output jacks. Connecting a TV with component video input jacks allows you to enjoy higher quality video.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB03CON_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 9 Thursday, January 13, 2005 3:28 PM Hooking up a Super Audio CD/CD player COMPONENT VIDEO DIGITAL OPTICAL ASSIGNABLE ANTENNA VIDEO 2 IN Y PB/CB /B–Y MONITOR AM Getting Started For details on the required cords (A–G), see page 6.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB03CON_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.book Page 10 Thursday, January 13, 2005 3:28 PM 1b: Connecting components with multi channel output jacks 1 Connect the audio jacks. (HT-9900M and HT-6900DP only) If your DVD or Super Audio CD player is equipped with multi channel output jacks, you can connect it to this receiver’s MULTI CH IN jacks to enjoy the multi channel sound.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB03CON_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 11 Thursday, January 13, 2005 3:28 PM 2 Connect the video jacks. DVD player TV monitor OUTPUT OUTPUT COMPONENT PR/CR/R–Y PB/CB/B–Y VIDEO C INPUT INPUT COMPONENT PR/CR/R–Y PB/CB/B–Y VIDEO Y G C Getting Started The following illustration shows how to connect a DVD player with COMPONENT VIDEO (Y, PB/ CB/B-Y, PR/CR/R-Y) output jacks.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB03CON_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.book Page 12 Thursday, January 13, 2005 3:28 PM 1c: Connecting components with only analog audio jacks Hooking up audio components For details on the required cords (A–G), see page 6.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB03CON_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 13 Thursday, January 13, 2005 3:28 PM Hooking up video components Satellite tuner OUTPUT VIDEO OUT TV monitor Getting Started If you connect your TV to the MONITOR VIDEO OUT jack, you can watch the video from the selected input (page 23). For details on the required cords (A–G), see page 6.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB03CON_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.book Page 14 Thursday, January 13, 2005 3:28 PM 2: Connecting the antennas Connect the supplied AM loop antenna and FM wire antenna.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB03CON_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 15 Thursday, January 13, 2005 3:28 PM 3: Connecting speakers Getting Started Connect your speakers to the receiver. This receiver allows you to use a 6.1 channel speaker system. To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a center speaker, and two surround speakers) and a sub woofer (5.1 channel).
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB03CON_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB03CON_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 17 Thursday, January 13, 2005 3:28 PM Installing the speakers on the wall 3 Hang the speakers on the screws. Metal hook on the back of the speaker 4.6 mm (3/16 inch) 1 10 mm (13/32 inch) Prepare screws (not supplied) that are suitable for the metal hook on the back of each speaker. See the illustrations below.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB03CON_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.book Page 18 Thursday, January 13, 2005 3:28 PM Performing initial setup operations 4: Connecting the AC power cord Connect the AC power cord to a wall outlet. R R L L FRONT B b To a wall outlet Before using the receiver for the first time, initialize the receiver by performing the following procedure.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB03CON_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 19 Thursday, January 13, 2005 3:28 PM x 5: Setting up the speakers 1 2 3 Press ?/1 to turn on the receiver. Press MAIN MENU repeatedly to select “ SET UP ”. x Press or repeatedly to select the parameter you want to adjust. Initial setting: 10 ft. Lets you set the distance from your listening position to the surround speakers.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB03CON_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.book Page 20 Thursday, January 13, 2005 3:28 PM x SW XXXXXXX (Sub woofer phase polarity) (HT-9900M and HT-6900DP only) Lets you set the sub woofer phase polarity. • NORMAL Normally, select “NORMAL”.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB03CON_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 21 Thursday, January 13, 2005 3:28 PM Adjusting the level Slight adjustments to the system can enhance your sound enjoyment.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB03CON_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.book Page 22 Thursday, January 13, 2005 3:28 PM 7: Adjusting the speaker levels and balance — TEST TONE Adjust the speaker levels and balance while listening to the test tone from your listening position. Use the remote for the operation. Tip The receiver employs a test tone with a frequency centered at 800 Hz. 1 2 Press ?/1 to turn on the receiver. Press TEST TONE. “T.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB04BSC_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 23 Thursday, January 13, 2005 3:28 PM To use the headphones Amplifier Operation Selecting the component Press input buttons to select the input.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB04BSC_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.book Page 24 Thursday, January 13, 2005 3:28 PM Listening to multi channel sound — MULTI CH IN (HT-9900M and HT-6900DP only) You can select the audio directly from the components connected to the MULTI CH IN jacks. This enables you to enjoy high quality analog inputs such as DVD or Super Audio CD. When MULTI CH IN is selected, the tone and sound field cannot be used.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB04BSC_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 25 Thursday, January 13, 2005 3:28 PM Direct tuning You can enter the frequency of the station you want directly. Use the remote for the operation. Press TUNER repeatedly to select the FM or AM band. The last received station is tuned in. Tip You can also use FM or AM on the receiver. 2 3 You can preset up to 30 FM or AM stations.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB04BSC_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.book Page 26 Thursday, January 13, 2005 3:28 PM Tuning to preset stations 1 2 Press FM or AM to select the FM or AM band. Changing the display The last received station is tuned in. Changing the information in the display Press PRESET TUNING + or PRESET TUNING – repeatedly to select the preset station you want. You can check the sound field etc.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB04BSC_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 27 Thursday, January 13, 2005 3:28 PM About the indications in the display 2 3* SW LFE SP A ; DIGITAL EX ; PRO LOGIC IIx DTS-ES 96/24 SP B SLEEP OPT COAX L C R SL S SR SB 4 qs 5 6 7 NEO:6 D.RANGE STEREO MONO 9 8 qa q; MEMORY qd A SW: Lights up when the audio signal is output from the SUB WOOFER jack.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB04BSC_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.book Page 28 Thursday, January 13, 2005 3:28 PM M Playback channel indicators: The letters (L, C, R, etc.) indicate the channels being played back. The boxes around the letters vary to show how the receiver downmixes the source sound.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB05SND_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 29 Thursday, January 13, 2005 3:28 PM Enjoying Surround Sound Using only the front speakers and sub woofer — 2CH STEREO — AUTO FORMAT DIRECT The Auto Format Direct (A.F.D.) mode allows you to select the decoding mode you want for your audio sound. A.F.D. mode (Display) Decoding mode A.F.D. AUTO (A.F.D.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB05SND_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.book Page 30 Thursday, January 13, 2005 3:28 PM Decoding the input audio signal automatically In this mode, the receiver automatically detects the type of audio signal being input (Dolby Digital, DTS, standard 2 channel stereo, etc.) and performs the proper decoding if necessary. This mode presents the sound as it was recorded/ encoded, without adding any surround effects.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB05SND_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 31 Thursday, January 13, 2005 3:28 PM Selecting a sound field You can take advantage of surround sound simply by selecting one of the receiver’s preprogrammed sound fields. They bring the exciting and powerful sound of movie theaters and concert halls into your home. Press MOVIE repeatedly to select the sound field you want.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB05SND_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.book Page 32 Thursday, January 13, 2005 3:28 PM Tips Selecting a sound field for music Press MUSIC repeatedly to select the sound field you want. The selected sound field appears in the display. Sound field Display HALL HALL JAZZ CLUB JAZZ LIVE CONCERT CONCERT x HALL Reproduces the acoustics of a classical concert hall.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB05SND_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 33 Thursday, January 13, 2005 3:28 PM Selecting the surround back decoding mode — SURR BACK DECODING Enjoying Surround Sound This function lets you select the decoding mode for the surround back signals of the multi channel input stream. By decoding the surround back signal of DVD software (etc.) recorded in Dolby Digital EX, DTS-ES Matrix, DTS-ES Discrete 6.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB05SND_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.book Page 34 Thursday, January 13, 2005 3:28 PM How to select the surround back decoding mode You can select the surround back decoding mode you want according to the input stream. When you select “SB AUTO” When the input stream contains the 6.1 channel decode flaga), the appropriate decoder is applied to decode the surround back signal.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB06ADV_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 35 Thursday, January 13, 2005 3:28 PM Advanced Adjustments and Settings Assigning the component video input — COMPONENT VIDEO INPUT ASSIGN 1 2 3 4 5 Press MAIN MENU repeatedly to select “ CUSTOM ”. Press or repeatedly to select “COMP. V. A.”. You can switch the audio input mode for components which have digital audio input jacks.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB06ADV_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.book Page 36 Thursday, January 13, 2005 3:28 PM Customizing sound fields By adjusting the LEVEL menu, you can customize the sound fields to suit your particular listening situation. Note on the displayed items The setup items you can adjust in each menu vary depending on the sound field. Certain setup parameters may be dimmed in the display.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB06ADV_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 37 Thursday, January 13, 2005 3:28 PM Resetting sound fields to the initial settings Use the buttons on the receiver for the operation. 1 2 Press ?/1 to turn off the power. While holding down 2CH, press ?/1. “SF. CLR.” appears in the display and all sound fields are reset to the initial setting.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB06ADV_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.book Page 38 Thursday, January 13, 2005 3:28 PM Advanced settings Using the CUSTOMIZE menu to adjust the receiver You can adjust various receiver settings using the CUSTOMIZE menu. 1 2 Press or repeatedly to select the parameter you want to adjust. Press + or – repeatedly to select the setting you want. The setting is entered automatically.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB06ADV_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 39 Thursday, January 13, 2005 3:28 PM x DUAL XXX (Digital broadcast language selection) Advanced Adjustments and Settings Lets you select the language you want to listen to during digital broadcast. This feature only functions for Dolby Digital sources.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB070TH_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.book Page 40 Thursday, January 13, 2005 3:28 PM Other Operations Naming preset stations and inputs You can enter a name of up to 8 characters for preset stations and inputs selected with input buttons, and display it in the receiver’s display. Use the buttons on the receiver for the operation.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB070TH_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 41 Thursday, January 13, 2005 3:28 PM Selecting the speaker system You can select the front speaker system you want to use by pressing the following button. The selected speaker system appears in the display.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB070TH_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.book Page 42 Thursday, January 13, 2005 3:28 PM Recording on a video tape You can record from a VCR, a TV or a DVD player using the receiver. You can also add audio from a variety of audio sources when editing a video tape. See the operating instructions of your VCR or DVD player if you need help. 1 2 Select the program source to be recorded.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB08REM_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 43 Thursday, January 13, 2005 3:28 PM Operations Using the Remote RM-AAP001 You can use the remote RM-AAP001 to operate the components in your system. Before you use your remote Inserting batteries into the remote 1 2 3 4 5 6 TV ?/1 ?/1 AV ?/1 RM SET UP P SYSTEM STANDBY SLEEP VIDEO1 VIDEO2 VIDEO3 DVD AV1 AV2 MD/TAPE SA-CD/CD TUNER AUX MULTI CH 2CH A.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB08REM_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.book Page 44 Thursday, January 13, 2005 3:28 PM The tables below show the settings of each button. Remote Button Operations Function Remote Button Operations Function CLEAR 9 A.F.D. 7 Receiver Selects the decoding mode for audio sound. ALT wd Remote When ALT button lights up, it changes the remote key function to activate those buttons with orange printing.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB08REM_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 45 Thursday, January 13, 2005 3:28 PM Operations Function Remote Button Operations Function MASTER VOL +/– qk Receiver Adjusts the master volume of the receiver. SLEEP ef Receiver MD/TAPE 5 Receiver To listen to Minidisc or audio tape. Activates the sleep function and the duration which the receiver turns off automatically.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB08REM_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.book Page 46 Thursday, January 13, 2005 3:28 PM Remote Button Operations Function Remote Button Operations 1-9 7 and 0/10 8 Receiver Use with SHIFT to preset radio station or tuning to preset stations and with D.TUNING for direct tuning. m/M 9 CD player/ VCD player/ LD player/ DVD player/ MD deck/ DAT deck/ Tape deck Selects track numbers. 0/10 selects track 10.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB08REM_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 47 Thursday, January 13, 2005 3:28 PM Remote Button Operations Function O qa VCD player/ Returns to the LD player/ previous menu or DVD player/ exits the menu. Blu-ray disc recorder/ Hard disc recorder/PSX/ Satellite tuner Receiver Selects a menu item. B/b qa Receiver Adjusts or changes the setting. V/v/B/b qa Selects a menu item.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB08REM_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.book Page 48 Thursday, January 13, 2005 3:28 PM Programming the remote You can program the remote to control nonSony components by changing the code. Once the control signals have been memorized, you can use those components as part of your system. Furthermore, you can also program the remote for Sony components that the remote is unable to control.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB08REM_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 49 Thursday, January 13, 2005 3:28 PM The numeric codes corresponding to the component and the maker of the component Use the numeric codes in the tables below to control non-Sony components and also Sony components that the remote is normally unable to control.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB08REM_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB08REM_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB09ADD_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.book Page 52 Thursday, January 13, 2005 3:28 PM If you encounter color irregularity on a nearby TV screen Additional Information Precautions On safety Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB09ADD_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 53 Thursday, January 13, 2005 3:28 PM Troubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. There is no sound from a specific component. • Check that the component is connected correctly to the audio input jacks for that component.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB09ADD_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.book Page 54 Thursday, January 13, 2005 3:28 PM Dolby Digital or DTS multi channel sound is not reproduced. • Check that the playing DVD, etc. is recorded in Dolby Digital or DTS format. • When connecting the DVD player, etc. to the digital input jacks of this receiver, check the audio setting (settings for the audio output) of the connected component.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB09ADD_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 55 Thursday, January 13, 2005 3:28 PM Error messages If there is a malfunction, the display shows a message. You can check the condition of the receiver by the message. Refer to the following table to solve the problem. DEC. EROR Appears when the signal which the receiver cannot decode (ex. DTS-CD) is input when “DEC. XXXX” in the CUSTOMIZE menu is set to “DEC.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB09ADD_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.book Page 56 Thursday, January 13, 2005 3:28 PM Video section Inputs (Analog) MULTI CH IN*, SA-CD/CD, MD/TAPE, DVD, VIDEO 1, 2, 3 Sensitivity: 800 mV Impedance: 50 k ohms Inputs/Outputs Video: COMPONENT VIDEO: * HT-9900M and HT-6900DP only.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB09ADD_HT-5950DP-U.fm] masterpage:Right GB01COV_HT-5950DP-U.book Page 57 Thursday, January 13, 2005 3:28 PM Dimension (w/h/d) (Approx.) Front speakers 130 × 220 × 120 mm (5 1/8 × 8 5/8 × 4 6/8 inches) Center speaker 245 × 108 × 120 mm (9 5/8 × 4 2/8 × 4 6/8 inches) Surround/surround back speakers 115 × 168 × 120 mm (4 4/8 × 6 5/8 × 4 6/8 inches) Mass (Approx.) Front speakers 1.7 kg (3 lb 12 oz) Center speaker 1.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB09ADD_HT-5950DP-U.fm] masterpage:Left GB01COV_HT-5950DP-U.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB09ADD_HT-5950DP-U.fm] masterpage:Right-3 (3 column) GB01COV_HT-5950DP-U.book Page 59 Thursday, January 13, 2005 3:28 PM List of button locations and reference pages How to use this page Use this page to find the location of buttons that are mentioned in the text.
lename[E:\SEM_Janet\DATA_HT950DP\J9041386_25497361115950DPUS\2549736111\GB01COV_HT-5950DP-UIX.fm] masterpage:Left GB01COV_HT-5950DP-U.
