Ultimate Sensitivity Ultra Clear Image 560TVL Super Vision at Ultra Low Light SHC-745 User’s Manual Thank you for purchasing a SAMSUNG CCD CAMERA. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. SALES NETWORK • SAMSUNG TECHWIN CO., LTD. 145-3, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, 462-120, Korea TEL : +82-31-740-8151~8158 FAX : +82-31-740-8145 • SAMSUNG OPTO-ELECTRONICS UK, LTD.
Before operating the camera, confirm the camera model and proper input power voltage. In order to that you can understand this manual thoroughly, we'll introduce our model description.
Contents Features Precautions 6 8 Components and Accessories 10 Overview 11 Front View Side View Bottom View Rear View Installation Procedures Lens • When Using Auto Iris Lens • When Using C/CS Mount Lens Connecting a Monitor Connecting Power Control via RS-485 Interface 11 12 13 14 15 How to Use the Camera Function Menu Structure How to Set up the Functions LENS EXPOSURE WHITE BALANCE BACKLIGHT SSNR DAY/NIGHT IMAGE ADJ SPECIAL EXIT 22 22 23 24 26 28 29 31 32 34 36 41 15 19 20 21 Troubleshootin
Features Ultra High Resolution Motion Detection By adopting a diagonal 8mm(1/3 ) 410,000 pixel ExView Sony CCD, the camera produces clear picture quality with a horizontal resolution of 560 TV lines for color, and 700 TV lines for B/W. Since the camera detects motion and generates signals without any additional external sensors, you can monitor activity more efficiently by connecting the camera to an alarm device.
Precautions Do not install under extreme temperature conditions. Do not install in high humidity environment. Use only under temperature conditions between -10˚C and +50˚C. Provide good ventilation when using in high temperature conditions. Do not install under unstable lighting conditions. May lower image quality. Do not drop the camera or subject it to physical shock. May cause a product malfunction. Never keep the camera face to strong light directly. May damage the CCD.
Components and Accessories Overview Front View 1. Ultra Low Light Color CCD Camera SHC-745 2. Auto Iris Lens Connector Plug 3. C-Mount Adapter Tripod Mounting Bracket Screw Hole Used to fix the Tripod Mounting Bracket to the top of the camera. C-Mount Lens Adapter Install this adapter to use a C-Mount Lens. Back Focus Control Lever Adjust focus by this Back Focus Lever. 4.
Overview Bottom View Side View Auto Iris Lens Connector Used to connect Auto Iris Lens plug. Tripod Mounting Bracket Screw Hole Used to fix the camera on a bracket or tripod. The screw sizes for this hole are as follows: L 1/4"-20 UNC (20 THREAD) L:4.5mm±0.2mm (ISO standard), or 0.197" (ASA standard) You can separate the Tripod Mounting Bracket and install it on the top or bottom of the camera. Make sure to use the Tripod Mounting Bracket when fixing the camera to a bracket or tripod.
Overview Installation Procedures Lens Rear View The lens is not supplied with this camera. Purchase a lens suitable for your environment. This camera accepts the auto iris lens and both C-and CS-mount lens. Notes • It is recommended to use the DC type Auto Iris Lens to effectively enjoy the major functions of this camera. • Keep the lens surface clean, since if it is contaminated with dirt or fingerprints the picture quality suffers.
Installation Procedures 3. Remove the cover of the auto iris lens connector plug and solder the lens cable to the connector pin of the plug. • For a Video Drive Lens • For a DC Drive Lens Pin 1: Red (Power) Pin 1: Damping Pin 2: NC Pin 2: Damping + Pin 3: White (Video Signal) Pin 3: Drive + Pin 4: Black (Ground) Pin 4: Drive Lens cable No. 3 Pin No. 1 Pin When Using C/CS Mount Lens Before installing a lens, identify whether the lens to be installed is a C-Mount or CS-Mount.
Installation Procedures • When Using a C Mount Lens 1. Remove the protective glass cover at the front of this product and turn the CMount Adapter clockwise to install it. Connecting a Monitor Connect the Video OUT port on the rear panel of the camera to a monitor. CCD Camera 2. Turn the C-Mount lens clockwise to install it. Monitor • Since the connection procedure may differ depending on the type of monitor or peripheral device to be connected, refer to the User Manual for the device to be connected.
Installation Procedures Connecting Power Control via RS-485 Interface Since power specifications differ depending on the model, make sure to check your model name and specifications before connecting power. You can connect power as shown in the following figure. For AC / DC power • Since the power specification supports both AC and DC, connect AC 24V, 500mA Adaptor or DC 12V, 500mA Adaptor. The camera can be controlled by using external controllers like a Remote controller.
How to Use the Camera Function Menu Structure How to Set up the Functions You can set up functions using the 5 buttons on the rear of the camera. Setup Menu LENS • DC • VIDEO • MANUAL EXPOSURE • SHUTTER • AGC • SENS-UP LEFT button • RETURN WHITE BALANCE • ATW UP button SET button • MANUAL • AWC SET DOWN button RIGHT button • OUTDOOR • INDOOR BACKLIGHT • OFF • BLC SSNR • ON • OFF • HLC DAY/NIGHT • COLOR • B/W • AUTO • FREEZ • V-REV • H-REV • D-ZOOM • SHARPNESS 1.
How to Use the Camera Select the function using the UP or DOWN button. MAIN SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.BACKLIGHT 5.SSNR 6.DAY/NIGHT 7.IMAGE ADJ 8.SPECIAL 9.EXIT DC Change the status using the LEFT or RIGHT button. ATW OFF ON AUTO 3. Set up a selected item by using the Left and Right buttons. 4. To finish the setting, select ‘EXIT’ and press the SET button. Notes • An item with the icon also has sub menus. To select a sub menu, select an item with the icon and press the SET button.
How to Use the Camera EXPOSURE Notes MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.BACKLIGHT OFF 5.SSNR ON 6.DAY/NIGHT AUTO 7.IMAGE ADJ 8.SPECIAL 9.EXIT 1. When the SETUP menu screen is displayed, select EXPOSURE by using the Up and Down buttons so that the arrow indicates EXPOSURE . 2. Select a desired mode using the Up and Down buttons. • When the SHUTTER is set to ESC after selecting the Internal Synchronization Type, the picture may become unstable if the camera faces a bright fluorescent light.
How to Use the Camera White Balance (White Bal.) Notes Use the White Balance function to adjust the screen color. 1. When the SETUP menu screen is displayed, select ‘White Bal.’ by using the Up and Down buttons so that the arrow indicates ‘White Bal.’ . 2. Select a desired mode using the Up and Down buttons. MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.BACKLIGHT OFF 5.SSNR ON Select one of the following 5 modes, as appropriate for your purpose.
How to Use the Camera BLC : Enables a user to directly select a desired area from a picture, and to view the area more clearly. HLC : Enable a user to select a mask color of high light area from a picture. Notes BLC ON BLC OFF HLC (High Light Compensation) : If there is a high light installed in a limited environment such as an apartment parking garage or gas station entrance, removing the high light makes it possible to view car license plates efficiently.
How to Use the Camera 3. Set the SSNR mode to ‘ON’ and press the SET button. Then you can adjust the noise reduction level. Notes • You cannot set the SSNR to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE menu is ‘OFF’. • When adjusting the noise reduction level of the SSNR mode, remember that the higher the level set, the more the noise level will be reduced but that after image may also occur. 2. Select a desired mode using the Left and Right buttons according to the picture display you want.
How to Use the Camera D-ZOOM : You can use a digital zoom of x1~x10. IMAGE ADJ. 1. When the SETUP menu screen is displayed, select ‘IMAGE ADJ.’ by using the Up and Down buttons so that the arrow indicates IMAGE ADJ. MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.BACKLIGHT OFF 5.SSNR ON 6.DAY/NIGHT AUTO 7.IMAGE ADJ 8.SPECIAL 9.EXIT SHARPNESS : As you increase this value, the picture outline becomes stronger and clearer. Adjust this value appropriately depending on the sharpness of the picture. 2.
How to Use the Camera Set it to ‘ON’ by using the Left and Right buttons. SPECIAL 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Up and Down buttons so that the arrow indicates ‘SPECIAL’. MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.BACKLIGHT OFF 5.SSNR ON 6.DAY/NIGHT AUTO 7.IMAGE ADJ 8.SPECIAL 9.EXIT Notes • When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even if you enter one.
How to Use the Camera Enter a title, move the cursor to ’POS’ and press the SET button. The entered title appears on the screen. Select the position to display the title on the screen by using the 4 direction buttons and press the SET button. When the position is determined, select ’END’ and press the SET button to return to the SPECIAL menu.
How to Use the Camera - MASK COLOR : Determine area color. You can select Gray, Green, Red, Blue, Black, White. - TRANSP : Determine the transparency of selected area as controlling number from 0 to 3. - RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL menu. DIS (Digital Image Stabilizer) : This function mitigates any picture movement due to external factors such as wind. Notes - DISP CAM ID : Display camera title on top left corner of the screen.
Troubleshooting If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. Problem Solution Nothing appears on the screen. The image on the screen is dim. The image on the screen is dark. • Check that the power cord and line connection between the camera and monitor are fixed properly. • Check that you have properly connected VIDEO cable to the camera VIDEO output jack.
DECLARATION OF CONFORMITY Specifications Application of Council Directive(s) SHC-745N POWER CCD Sync Input Voltage Power Consumption Size Total Pixels Effective Pixels Scanning System Synchronization Frequency O.S.D E L E C T R I C A L Back-light Comp. Resolution S/N (Y signal) Min.
MEMO
