Flat Panel Television User Manual
Table Of Contents
- Getting Started
- Checking the accessories
- Inserting batteries into the remote
- 1: Attaching the Table-Top Stand (except KDL-65HX92x)
- 2: Adjusting the viewing angle of the TV
- 3: Connecting an antenna (aerial)/Set Top Box/recorder (e.g. DVD recorder)
- 4: Connecting audio/video devices
- 5: Preventing the TV from toppling over
- 6: Bundling the cables
- 7: Performing the initial set-up
- Using Your BRAVIA TV
- Network Setup
- Additional Information
32
GB
5 Attach the Mounting Bracket and the Lock Bracket. (4-3 through 4-7)
Refer to the instruction manual provided with the Wall-Mount Bracket.
6 Prepare the paper template. (5-2)
1. Refer to the following “TV installation dimensions table” and mark the TV outline on the
template.
2. Tape the template to the wall as instructed in the manual provided with the Wall-Mount
Bracket.
Follow the instruction manual provided with the Wall-Mount Bracket to complete the
installation. (
5-3 through 6)
SU-WL500
~
• Attach the Mounting Hook using the four screws supplied with the Wall-Mount Bracket.
• When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the original
holes on the rear of the TV.
Screw and Hook locations diagram/table
×
4
Soft cloth
Screw
(+PSW
6 × 16)
Mounting Hook
×
2
×
2
Soft cloth
Screw
(+PSW
6 × 16)
Mounting Hook
For KDL-65HX92x
For KDL-60/55/46/40NX72x,
KDL-55/46HX92x, KDL-55/46HX82x
Model Name
KDL-
Screw location Hook location
SU-WL500 SU-WL500
65HX92x
d, g a
60NX72x
55HX92x/55HX82x/55NX72x
e, j b
46HX92x/46HX82x/46NX72x
40NX72x