Flat Panel Television User Manual
Table Of Contents
- Getting Started
- Checking the accessories
- Inserting batteries into the remote
- 1: Attaching the Table-Top Stand (except KDL-65HX92x)
- 2: Adjusting the viewing angle of the TV
- 3: Connecting an antenna (aerial)/Set Top Box/recorder (e.g. DVD recorder)
- 4: Connecting audio/video devices
- 5: Preventing the TV from toppling over
- 6: Bundling the cables
- 7: Performing the initial set-up
- Using Your BRAVIA TV
- Network Setup
- Additional Information
13
GB
Getting Started
B For KDL-60/55/46/40NX72x,
KDL-55/46HX92x, KDL-55/46HX82x
5: Preventing the TV from
toppling over
1 Install a wood screw (4 mm in
diameter, not supplied) in the TV stand.
2 Install a machine screw (not supplied)
into the screw hole of the TV.
For KDL-65HX92x
Use M6 screw
For KDL-60/55/46/40NX72x,
KDL-55/46HX92x, KDL-55/46HX82x
Use M4 screw
3 Tie the wood screw and the machine
screw with a strong cord (not supplied).
The length of the M6/M4 machine screw
differs depending on the cord diameter.
Please refer to below illustration.
Audio/video device
AV/Component adapter (supplied)
5-6 mm
Screw M6/M4
Cord
TV’s Table-Top
Stand