Flat Panel Television User Manual
Table Of Contents
- Getting Started
- Checking the accessories
- Inserting batteries into the remote
- 1: Attaching the Table-Top Stand (except KDL-65HX92x)
- 2: Adjusting the viewing angle of the TV
- 3: Connecting an antenna (aerial)/Set Top Box/recorder (e.g. DVD recorder)
- 4: Connecting audio/video devices
- 5: Preventing the TV from toppling over
- 6: Bundling the cables
- 7: Performing the initial set-up
- Using Your BRAVIA TV
- Network Setup
- Additional Information
11
GB
Getting Started
3: Connecting an antenna
(aerial)/Set Top Box/
recorder (e.g. DVD
recorder)
~
• Use an antenna cable connector no greater than
14 mm in thickness.
• Use an HDMI cable connector within 12 mm
(thickness) x 21 mm (width).
Connecting a Set Top Box/recorder
(e.g. DVD recorder) with SCART
B For KDL-65HX92x
B For KDL-60/55/46/40NX72x,
KDL-55/46HX92x, KDL-55/46HX82x
~
• Right Angle Type Universal SCART Lead is
recommended for this connection.
Set Top Box/recorder (e.g. DVD recorder)
Set Top Box/recorder (e.g. DVD recorder)
SCART adapter
(supplied)
(Continued)