4-270-412-15(1) LCD Digital Colour TV Operating Instructions Getting Started Using Your BRAVIA TV Network Setup Additional Information KDL-65HX92x / 60NX72x / 55HX92x / 55HX82x / 55NX72x / 46HX92x / 46HX82x / 46NX72x KDL-40NX72x
NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced with the same rating of fuse approved by ASTA or BSI to BS 1362 (i.e., marked with or ) must be used. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover.
TV Wireless System Regulation Information Precautions For Customers in Italy • Some people may experience discomfort (such as eye strain, fatigue, or nausea) while watching 3D video images or playing stereoscopic 3D games. Sony recommends that all viewers take regular breaks while watching 3D video images or playing stereoscopic 3D games. The length and frequency of necessary breaks will vary from person to person. You must decide what works best.
• The LCD screen contains a small amount of liquid crystal. Some fluorescent tubes used in this TV set also contain mercury (except for LED backlight LCD TV). Follow your local ordinances and regulations for disposal. • Do not subject the LCD screen to any strong impact or shock. The screen glass may crack or shatter and cause injury. (Caution about handling the remote control) Notes Handling and cleaning the screen surface/cabinet of the TV set • Observe the correct polarity when inserting batteries.
GB
Table of Contents Getting Started Checking the accessories ........................................................................................................ 8 Inserting batteries into the remote............................................................................................ 8 1: Attaching the Table-Top Stand (except KDL-65HX92x) ...................................................... 8 2: Adjusting the viewing angle of the TV ................................................................
After setting up your BRAVIA TV and learning basic operations with this manual, see the built-in manual (i-Manual) for further explanation of the features of your TV. This TV has a built-in manual (i-Manual). To access the i-Manual, press i-MANUAL on the remote, and select an item. For details, see page 20 of this manual. Contents of the i-Manual may differ depending on the model/region/area.
Getting Started Checking the accessories Remote (1) Size AAA batteries (R03 type) (2) Table-Top Stand (1)*1 (except KDL-65HX92x) Fixing screws for Table-Top Stand (M5 x 16) (3) (except KDL-65HX92x, KDL-60NX72x) Assembling screws for Table-Top Stand (M6 x 14) (4) (KDL-60/55/46NX72x, KDL-55/46HX92x, KDL-55/46HX82x only) Assembling screws for Table-Top Stand (M6 x 14) (3) (KDL-40NX72x only) Hexagon wrench (1) (except KDL-65HX92x) AV/Component Adapter (1) (except KDL-65HX92x) SCART Adapter (1) (except KDL-65HX9
3 Fix the TV to the Table-Top Stand according to the arrow marks that guide the screw holes using the supplied screws. 2 Attach the TV and Table-Top Stand with the supplied screw and hexagon wrench. * ~ • If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}. Getting Started Head * 3 N•m {30 kgf•cm} For KDL-60NX72x 1 Align with the two dowels of the TableTop Stand, and gently place the TV, checking the f mark is facing the front.
B For KDL-65HX92x 2: Adjusting the viewing angle of the TV Head This TV can be adjusted within the angles as illustrated. Angle adjustment (Swivel) (except KDL-65HX92x, KDL-60NX72x) ~ • When adjusting the angle, hold the stand with one hand to avoid having the stand slip or TV tip over.
3: Connecting an antenna (aerial)/Set Top Box/ recorder (e.g. DVD recorder) B For KDL-60/55/46/40NX72x, KDL-55/46HX92x, KDL-55/46HX82x SCART adapter (supplied) ~ • Use an antenna cable connector no greater than 14 mm in thickness. • Use an HDMI cable connector within 12 mm (thickness) x 21 mm (width). Getting Started Connecting a Set Top Box/recorder (e.g. DVD recorder) with SCART B For KDL-65HX92x Set Top Box/recorder (e.g.
Connecting a Set Top Box/recorder (e.g. DVD recorder) with HDMI B For KDL-65HX92x 4: Connecting audio/video devices B For KDL-65HX92x Set Top Box/recorder (e.g. DVD recorder) B For KDL-60/55/46/40NX72x, KDL-55/46HX92x, KDL-55/46HX82x Set Top Box/recorder (e.g.
B For KDL-60/55/46/40NX72x, KDL-55/46HX92x, KDL-55/46HX82x 5: Preventing the TV from toppling over Getting Started AV/Component adapter (supplied) 1 Install a wood screw (4 mm in diameter, not supplied) in the TV stand. 2 Install a machine screw (not supplied) into the screw hole of the TV. For KDL-65HX92x Use M6 screw For KDL-60/55/46/40NX72x, KDL-55/46HX92x, KDL-55/46HX82x Use M4 screw Audio/video device 3 Tie the wood screw and the machine screw with a strong cord (not supplied).
6: Bundling the cables ~ • Before bundling the cables, remove the cable holder from the AC cover (see step 1 and 2). Reuse the cable holder (see step 3) to bundle the other cables (see step 4). • Do not bundle the AC power cord (mains lead) together with other cables. 7: Performing the initial setup KDL-65HX92x 2 1 4 3 1 Connect the TV to your AC power outlet (mains socket). 2 Check the ENERGY SAVING switch setting is on (z). 3 Press 1 on the TV. The = (power) indicator will light up in green.
~ • “Full Scan” may not be available depending on your region/country. Programme Sorting: Changes the order of analogue channels stored in the TV. 1 Press F/f to select the channel you want to move to a new position, then press . 2 Press F/f to select the new position for the channel, then press . ~ • You can also tune channels manually.
Using Your BRAVIA TV Watching the TV 1 Turn on the TV. 2 Select a mode. 3 Select a TV channel. 1 Switch ENERGY SAVING switch on (z). 2 Press 1 on the TV to turn on the TV. 2 GUIDE 3 z • The number 5, N, PROG + and AUDIO buttons on the remote have a tactile dot. Use the tactile dots as a reference when operating the TV. 16 GB To use Digital Electronic Programme Guide Press GUIDE in digital mode to display the programme guide. Use with 0-9 to select digital channels.
Parts and controls of the remote Use the supplied remote to control your TV. Basic remote operations are explained here. For details on all of the remote function, press i-MANUAL and see the built-in manual (i-Manual) (page 20). 1 :/1 Press to turn the TV on and off from standby mode. 2 i-MANUAL Displays the built-in manual (i-Manual). 4 F/f/G/g/ Moves the on-screen cursor, and confirm the item. 5 OPTIONS Displays a list of convenient functions and menu shortcuts.
Selecting various functions and settings (Home Menu) You can select all the features from the Home menu. See page 19 for the Home menu map. 1 Press HOME. 2 Press F/f/G/g/ 2 1, 3 to select items. To select items in the Home menu (e.g., selecting “Settings”) 1 Press G/g to select “Settings”. The contents of “Settings” are displayed on the right. 2 Press F/f to select “Display”. 3 Press to launch the menu. According to the screen instruction, press F/f/G/g to select items and press to confirm.
Home menu map After pressing HOME on the remote, following icons are displayed as categories. The categories are available depending on your TV model, region, country and broadcasting conditions. You can select a list of TV channels, or a programme guide. Media You can enjoy photo/music/video content via USB devices or the home network. Inputs You can select equipment connected to the TV.
Displaying Operating Instructions (i-Manual) Operating instructions are built into your BRAVIA TV and can be displayed on the screen. To learn more about your TV features, access your i-Manual with the touch of a button. 1 Press i-MANUAL. 2 Press F/f/G/g/ 1 to select items. 2 To select items in the i-Manual 1 Press F/f to select an item. The contents in the item are displayed on the right as the second layer. 2 Press g to move to the second layer. 3 Press F/f to select an item from the second layer.
Description of the i-Manual screen Press G to go back to the previous page Press f to go to the next page Page number/Total page number Press RETURN to go back to the previous page Press to launch the function ~ • This will be displayed only when the function is available. The i-Manual has a bookmark function. Pages can be bookmarked with coloured buttons, according to the instructions at the bottom of the screen.
Network Setup When you connect this TV to the Internet, you can enjoy multiple functions: displaying a photograph that shows its location on the map, enjoying Internet video, etc. For details on the functions, refer to the i-Manual. Except KDL-65HX92x Internet ~ • You will need to contract with an Internet service provider to connect to the Internet.
Setting up the Internet connection Using the network feature you can connect the TV to the Internet. The set-up procedure differs depending on the type of network and LAN router. Before setting up the Internet connection, be sure to set up a LAN router. Check your wireless LAN environment using the following chart. For security purpose, “WPS (PIN)” provides a PIN code for your router. PIN code is renewed every time you select “WPS (PIN)”. 1 Press HOME, then select > “Network” > “Network Set-up”.
Type 3: Unsecured network with any type of wireless LAN router To set up a wireless LAN, SSID (wireless network name) will be required. 1 Press HOME, then select > “Network” > “Network Set-up”. 2 3 Select “Wireless Set-up”. 4 Select “Scan”, then select a network from the list of scanned wireless networks. Viewing the network status You can confirm your network status. 1 Press HOME, then select > “Network” > “Network Set-up”. 2 Select “View Network Status”.
If you cannot connect to your home network The TV detects if the server is being correctly recognised when you cannot connect it to your home network. If the diagnostic results indicate a failure, check possible causes, and network connections and settings. 1 Press HOME, then select > “Network” > “Home Network Setup”. 2 Select “Server Diagnostics”. The server diagnostic starts. When the server diagnostic is complete, the diagnostic result list appears.
Additional Information Troubleshooting When the 1 (standby) indicator is flashing, count how many times it flashes (interval time is three seconds). Press 1 on the TV to turn it off, disconnect the AC power cord (mains lead), and inform your dealer or Sony service centre of how the indicator flashes (number of flashes). When the 1 (standby) indicator is not flashing, check the items in the tables as follows. Also refer to “Troubleshooting” in the i-Manual.
Specifications System Panel system LCD (Liquid Crystal Display) Panel TV system Analogue: Depending on your country/area selection: B/G/H, D/K, L, I, M Digital: DVB-T2 (KDL-65HX923/60NX723/55HX923/55HX823/55NX723/46HX923/46HX823/ 46NX723/40NX723 only) DVB-T/DVB-C Colour/video system Analogue: PAL, PAL60 (only video input), SECAM, NTSC3.58, NTSC4.43 (only video input) Digital: MPEG-2 MP@ML/HL, H.
Model name KDL- 65HX92x 60NX72x 55HX92x with Table-Top Stand 51.7 kg 34.3 kg 31.6 kg without Table-Top Stand 43.2 kg 28.8 kg 26.1 kg Supplied accessories See “Checking the accessories” (page 8).
Model name KDL- 46HX82x 46NX72x 40NX72x Average annual energy consumption*1 115 kWh 120 kWh 96 kWh Standby power consumption*2 0.25 W (15 W in software / EPG update mode) 0.25 W (14 W in software / EPG update mode) 0.25 W (14 W in software / EPG update mode) Display resolution 1,920 dots (horizontal) × 1,080 lines (vertical) Dimensions (Approx.) (w × h × d) with Table-Top Stand 108.3 × 69.3 × 25.5 cm 108.4 × 69.4 × 25.5 cm 94.9 × 61.8 × 21.0 cm without Table-Top Stand 108.3 × 66.3 × 2.
Installing the Accessories (Wall-Mount/Wall Hanging Bracket) To Customers: For product protection and safety reasons, Sony strongly recommends that installing of your TV be performed by Sony dealers or licensed contractors. Do not attempt to install it yourself. To Sony Dealers and Contractors: Provide full attention to safety during the installation, periodic maintenance and examination of this product.
SU-WH500 (except KDL-65HX92x) Refer to the Instructions supplied with the SU-WH500 Wall-Hanging Bracket to properly carry out the installation. × Screw 2 Pulley × 1 Tilt-up Bracket Screw × 1 Screw ~ • With the screen of the TV facing down, attach the SU-WH500 accessories. • It is unnecessary to attach the Cushions supplied with SU-WH500. (3-1 in “Installation” of SU-WH500 Instructions) • Attach the Pulleys to the upper two screw holes (see illustration) using screws supplied with SU-WH500.
5 Attach the Mounting Bracket and the Lock Bracket. (4-3 through 4-7) Refer to the instruction manual provided with the Wall-Mount Bracket. 6 Prepare the paper template. (5-2) 1. Refer to the following “TV installation dimensions table” and mark the TV outline on the template. 2. Tape the template to the wall as instructed in the manual provided with the Wall-Mount Bracket. Follow the instruction manual provided with the Wall-Mount Bracket to complete the installation.
SU-WL500 Screw location Hook location When installing the Mounting Hook on the TV. When installing the TV onto the Base Bracket.
3 SU-WL500 F E A C B D G H Screen centre point Unit: cm Model Name KDL- Display dimensions A Length for each mounting angle Screen centre dimension Angle (0°) C B D Angle (20°) E F G H 1 2 3 1 2 3 1 2 3 2 3 2 3 2 3 - 0.1 - - 46.1 - - 10.6 - 38.3 - 85.0 - 48.1 65HX92x 150.4 90.0 - 60NX72x 140.5 84.4 32.7 - 3.0 76.1 - 46.4 4.3 - 8.8 - 34.6 - 79.4 - 47.7 55HX92x 127.8 77.1 29.9 0.5 6.5 69.6 39.3 46.2 5.2 5.8 9.8 37.6 33.1 72.
Safety Information Installation/Set-up Install and use the TV set in accordance with the instructions as follows in order to avoid any risk of fire, electrical shock or damage and/or injuries. Installation 8 mm - 12 mm Mains lead Ventilation – • Never cover the ventilation holes or insert anything in the cabinet. • Leave space around the TV set as shown below. • It is strongly recommended that you use a Sony wall-mount bracket in order to provide adequate air-circulation.
• Never spray water or detergent directly on the TV set. It may drip to the bottom of the screen or exterior parts and enter the TV set, and may cause damage to the TV set. off, pull the plug from the mains to disconnect the TV set completely. • However, some TV sets may have features that require the TV set to be left in standby to work correctly.
Additional Information Keep this Instruction manual safe you’ll need it Television in the UK is going digital, bringing us all more. Please see overleaf to find out when your area switches to digital. Digital UK is the independent, non-profit organisation leading the process of digital TV switchover in the UK. Digital UK provides impartial information on what people need to do to prepare for the move to digital, and when they need to do it.
How to re-tune: 1 Press "HOME" on the remote 2 Press G/g to select "Settings" 3 Press F/f to select "Digital Set-up", then press 4 Press 5 Press G to select "Yes" then press 6 Follow the on screen instructions. to select "Digital Auto Tuning" to start "Digital Auto Tuning" If you are missing any channels, it may be that they are not available in your area, or that your aerial needs upgrading.
For useful information about Sony products 4-270-412-15(1) © 2011 Sony Corporation
