2-179-083-11 (2) LCD Color TV Operating Instructions KLV-32M1 © 2004 Sony Corporation
Owner’s Record The model and serial numbers are located at the rear of the TV. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No. Contacting Sony If, after reading the following instructions, you have additional questions related to the use of your Sony TV, please call one of the following numbers.
WARNING NOTIFICATION Installing To reduce the risk of fire or shock hazard, do not expose the TV to rain or moisture. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
CAUTION Use the following SONY appliance(s) only with the following WALLMOUNT BRACKET. Use with other WALL-MOUNT BRACKET may cause instability and result in possible injury. SONY APPLIANCE MODEL NO. KLV-32M1 SONY WALL-MOUNT BRACKET MODEL NO. SU-LW1 To Customers Sufficient expertise is required for installing the specified product. Be sure to subcontract the installation to Sony dealers or contractors and pay adequate attention to safety during the installation.
For the unit with a three-wire grounding type AC plug This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the grounding plug. Overloading Do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since this can result in fire or electric shock.
Broken pieces Do not throw anything at the unit. The screen glass may break by the impact and cause serious injury. Installation and moving Carry the TV in the specified manner Cable wiring Carrying the TV requires at least two people. Take care not to catch your feet on the cables. It may damage the unit. If you carry the TV in a manner other than that specified and without the specified number of persons, it may drop and a serious injury may result. Be sure to follow the instructions given below.
s Never cover the slots and openings with a cloth or other materials. s Never block the slots and openings by placing the unit on a bed, sofa, rug or other similar surface. Outdoor use Do not install this unit outdoors. If the unit is exposed to rain, it may result in fire or electric shock. If the unit is exposed to direct sunlight, the unit may heat up and it may damage the unit. Vehicle and ceiling Do not install this unit in a vehicle or hung from the ceiling.
Service Damage Requiring Service Unplug the unit from the wall outlet and refer servicing to qualified service personnel under the following conditions: s When the power cord or plug is damaged or frayed. s If liquid has been spilled into the unit. s If the unit has been exposed to rain or water. s If the unit has been subject to excessive shock by being dropped, or the cabinet has been damaged. s If the unit does not operate normally when following the operating instructions.
Important Safety Instructions 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Table of Contents Installing the TV Unpacking ................................................ 13 Overview of the Remote Control ............ 13 Remote Control Descriptions ........... 14 Programming the Remote Control ... 16 Using your Remote Controls with Other Equipment .................. 18 Overview of the TV Controls and Connectors................................... 20 Front Panel Controls and Connectors .................................. 20 Rear Panel Connectors ....................
Using Advanced Features Adjusting the Picture Position Vertically .............................................. 58 Adjusting the Picture Position Horizontally ......................................... 59 Adjusting the Picture Quality ................. 60 Adjusting the Sound Quality .................. 62 Selecting Stereo or Bilingual Programs ............................. 63 Selecting stereo or bilingual programs using the menu ............
Installing the TV Installing the TV Overview of the Remote Control Insert two size AA batteries (supplied) by matching the e and E on the batteries to the diagram inside the remote control’s battery compartment.
Remote Control Descriptions 3 DVD/ MUTING VCR SAT/ POWER CABLE MODE PICTURE WIDE SLEEP DISPLAY 4 DVD/VCR: Press to turn on and off the video equipment. qf SAT/CABLE: Press to turn on and off the satellite receiver or cable box. qg 2 MUTING Press to mute the sound. Press again or press VOL + to restore the sound. qh 3 PICTURE Press repeatedly to cycle through the available video picture modes: Vivid, Standard, Pro. The video picture modes can be also accessed in the Video menu.
Description Button Description 0 Input Select Buttons Press to select the video equipment connected to the TV’s video inputs. ws CH +/– Press to scan through channels. To scan quickly through channels, press and hold down either CH. wd Press to select the sound effect modes: TruSurround, Off. The sound effect modes can be also accessed in the Audio menu. For more details, see “Selecting the Effect Mode” on page 45. TV: Press to select the TV to watch the TV programs.
Programming the Remote Control 5 DVD/ MUTING VCR SAT/ POWER CABLE Sony Equipment Programmable Code Number DVD/VCR 601 (Sony Dream System) SAT/Cable 801 (Sony Satellite Receiver) If you have video equipment other than Sony brand that you want to control with the TV’s remote control, use the following procedures to program the remote control. MODE PICTURE WIDE SLEEP DISPLAY TOP MENU FAVORITES The remote control is preset to operate Sony brand video equipment.
Manufacturer’s Codes Manufacturer Code Sony 751 General Electric 755 Hitachi 758 JVC 756 Code Manufacturer Code Canon 309, 308 Sanyo 330, 335 Citizen 332 Scott Craig 302, 332 312, 313, 321, 335, 323, 324, 325, 326 Curtis Mathes 304, 338, 309 Sharp 327, 328 Daewoo 341, 312, 309 Signature 2000 (M.
Operating a VCR 18 To Press Turn on/off DVD/VCR (POWER) Control a VCR DVD/VCR (FUNCTION) Change channels CH +/– Record N and z simultaneously Play N Stop x Fast forward M Rewind m Pause X (press again to resume normal playback) Search the picture forward or backward M or m during playback (release to resume normal playback)
Operating a DVD Player or DVD Changer Operating a DVD/VCR or DVD/HDD Combo Unit Press Turn on/off DVD/VCR (POWER) To Press Control a DVD player DVD/VCR (FUNCTION) Turn on/off DVD/VCR (POWER) If you have a DVD changer, to skip discs F1 Play N If you have a DVD/VCR combo component, Select the DVD F1 F2 Select the VCR Stop x Pause X (press again to resume normal playback) Step through different tracks of an audio disc M to step forward or m to step backward Step through different chapters
Overview of the TV Controls and Connectors Front Panel Controls and Connectors To open the drop-down panel To open the drop-down panel of your TV, push up the panel door just under the “v PUSH-OPEN” mark until you hear a click, then the panel door will open. PUSH-OPEN PUSH-OPEN S VIDEO 4 5 (MONO) VIDEO L AUDIO R VIDEO 2 IN INPUT VOLUME CHANNEL 6 7 8 9 Item/Jack Description 1 (IR) Infrared Receiver Receives IR signals from the remote control. 2 When lit, indicates one of the timers is set.
Rear Panel Connectors Installing the TV 2 1 3 AC IN VHF/UHF R L AUDIO IN 5 IN VIDEO IN 1 R 4 AUDIO VIDEO L (MONO) S VIDEO 8 3 4 HD/DVD IN AUDIO 5 R 6 L Y PB PR L R AUDIO OUT (VAR/FIX) CENTER SPEAKER IN 180W (6 ) MAX 7 Jack Description 1 AC IN Connects the supplied AC power cord. 2 VHF/UHF RF input that connects to your VHF/UHF antenna or cable box.
Preventing the TV from Falling Down After connections with antennas and other equipment are completed, be sure to attach the supplied clamp screws to the rear of the TV, and pass a sturdy cord or chain and attach it to a wall or pillar. 1 Remove one of the two screws at the rear of the TV, then attach the supplied clamp screw to the screw hole. Attached screw Rear of the TV Clamp screw (supplied) 2 3 22 Repeat step 1 to attach the other clamp screw.
Connecting and Setting the TV Connecting directly to cable or an antenna VHF only or VHF/UHF or cable 75-ohm coaxial cable (supplied) Rear of TV VHF/UHF jack Connector types You may find it necessary to use some of the following connector types during set up. Supplied 75-ohm coaxial cable Screw-on type Screw into connection. S VIDEO cable High quality video cable for enhanced picture quality Align guides and push into connection.
Connecting Optional Equipment Use the instructions in this section to connect the following optional equipment: If you are connecting See page VCR and Cable TV 25 page Satellite Receiver 26 page Satellite Receiver and VCR 27 page AV Receiver 28 page DVD Player with Component Video Connectors 29 page DVD Player with S Video and Audio Connectors 30 page Digital Cable Box 31 page Digital Satellite Receiver 32 page Digital Satellite Receiver with HDMI Connector 33 page DVD Player or Digital
Connecting a VCR and Cable TV Use this hookup if: • You subscribe to a cable TV system that does not require a cable box. Disconnect all power sources before making any connections. 1 2 Connect the CATV cable to the VCR’s IN jack. 3 Using A/V and S VIDEO cables, connect the VCR’s AUDIO and S VIDEO OUT jacks to the TV’s AUDIO and S VIDEO IN jacks (VIDEO 1 IN or VIDEO 3 IN). Connecting and Setting the TV Using the supplied 75-ohm coaxial cable, connect the VCR’s OUT jack to the TV’s VHF/UHF jack.
Connecting a Satellite Receiver Disconnect all power sources before making any connections. 1 Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack. 2 Using A/V and S VIDEO cables, connect the satellite receiver’s AUDIO and S VIDEO OUT jacks to the TV’s AUDIO and S VIDEO IN jacks (VIDEO 1 IN or VIDEO 3 IN). Tip If your satellite receiver is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable.
Connecting a Satellite Receiver and a VCR Disconnect all power sources before making any connections. 1 Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack. 2 3 Connect the CATV cable to the VCR’s VHF/UHF IN jack. 4 Using A/V and S VIDEO cables, connect the satellite receiver’s AUDIO and S VIDEO OUT jacks to the VCR’s AUDIO and S VIDEO IN jacks. Connecting and Setting the TV Using the supplied 75-ohm coaxial cable, connect the VCR’s OUT jack to the TV’s VHF/UHF jack.
Connecting an AV Receiver Disconnect all power sources before making any connections. Using an AUDIO cable, connect the TV’s AUDIO OUT jacks to the AV receiver’s AUDIO IN jacks. Rear of TV VIDEO IN 1 R AUDIO VIDEO L (MONO) S VIDEO AUDIO-R (red) 3 4 HD/DVD IN AUDIO R L Y PB PR AUDIO-L (white) R AUDIO cable (not supplied) L AUDIO OUT (VAR/FIX) CENTER SPEAKER IN 180W (6 ) MAX Audio input AV Receiver (Compact AV system, etc.
Connecting and Setting the TV VIDEO IN 1 R AUDIO VIDEO L (MONO) S VIDEO 3 4 HD/DVD IN AUDIO R R L Y PB PR L AUDIO OUT (VAR/FIX) CENTER SPEAKER IN 180W (6 ) MAX 29
Connecting a DVD Player with S Video and Audio Connectors Use this hookup if: • Your DVD player does not have component (Y, PB, PR) jacks. Tips • If your DVD player has component video output connectors, for best picture quality, use the connection described on page 29. • The Y, PB and PR jacks on your DVD player are sometimes labeled as Y, CB and CR, or Y, B-Y and R-Y. If so, connect the cables to the matching colors.
Connecting and Setting the TV VIDEO IN 1 R AUDIO VIDEO L (MONO) S VIDEO 3 4 HD/DVD IN AUDIO R R L Y PB PR L AUDIO OUT (VAR/FIX) CENTER SPEAKER IN 180W (6 ) MAX 31
Connecting a Digital Satellite Receiver Disconnect all power sources before making any connections. 1 Using a component video cable, connect the Digital Satellite Receiver’s Y, PB and PR jacks to the Y, PB and PR jacks on the TV. Use the HD/DVD 4 IN connections. Note Component video (Y, PB, PR) connection is necessary to view 480p, 720p, and 1080i formats. Note that this TV displays all format types of picture in a resolution of 1,366 dots × 768 lines.
Connecting and Setting the TV R L AUDIO IN VIDEO IN VIDEO S VIDEO 5 MONO) IN HD/DVD IN L Y PB PR 33
R L AUDIO IN VIDEO IN VIDEO S VIDEO 5 MONO) IN HD/DVD IN L 34 Y PB PR
Connecting a DVD Player or Digital Satellite Receiver via AV Receiver with CENTER SPEAKER IN terminals Use this hookup if: • You have an audio equipment that has multi-channel speaker outputs, such as an AV Receiver with a Dolby Digital (AC-3) decoder. Disconnect all power sources before making any connections. Using a SPEAKER cord, connect the TV’s CENTER SPEAKER IN terminals to the AV Receiver’s CENTER SPEAKER OUT terminals.
Connecting a Camcorder Disconnect all power sources before making any connections. Using an A/V cable, connect the Camcorder’s A/V OUT jack to the TV’s AUDIO IN jacks and VIDEO IN jack (VIDEO 2 IN). Tips • You can also use the VIDEO 1 IN and VIDEO 3 IN jacks located on the rear of the TV to connect your camcorder. • If your camcorder has an S Video output connector, for better picture quality, use an S VIDEO cable to connect the camcorder’s S VIDEO OUT jack to the TV’s S VIDEO IN jack (VIDEO 2 IN).
1 Setting the TV Press 1 (Power) on the TV. The Auto Setup menu automatically appears on the screen when you turn on the TV for the first time. Setting the Channels After you finish connecting your TV, you can run Auto Program to set up your channels. The Auto Setup menu appears when you turn your TV on for the first time after installing it. To skip channels, see page 38.
To watch VHF/UHF channels with an antenna 1 Press MENU. 2 Press V/v to select (Channel), then press . 3 Press V/v to select “Cable,” then press . 4 Press V/v to select “Off,” then press . 5 Perform steps 3 - 5 in “To perform Auto Program again” above. To skip channels You can skip unnecessary channels when selecting channels using the CH +/– buttons. 1 Press MENU. 2 Press V/v to select (Channel), then press . 3 Press V/v to select “Channel Skip/Add,” then press .
To fix in a TV channel If you have connected a cable box or satellite receiver to your TV, and do not intend to connect any other audio or video equipment, it is recommended that you fix a TV channel. Doing so will ensure no accidental channel switch when using your TV. 1 Press MENU. 2 Press V/v to select (Channel), then press Using the Menu Most of advanced settings and adjustments are performed using the menu screen. Basic operations to navigate through menus are described below.
To open the menu screen and select the option Menu category Menu option Selecting the On-screen Menu Language You can select the language to be displayed in all menus. , Press MENU to open the menu screen. Press V/v to select the desired category, then . press DVD/ MUTING VCR SAT/ POWER CABLE MODE PICTURE WIDE SLEEP DISPLAY To exit the menu screen, press MENU again. m Setting option TOP MENU FAVORITES MENU , Press V/v to select the option, then press .
1 Press MENU. TV Video Return Mode: Picture: Brightness: Color: Hue: Sharpness: Backlight: Color Temp.
Watching with closed caption 2 Press V/v to select (Setup), then press . You can display Caption Vision if the broadcaster offers this service. DVD/ MUTING VCR , SAT/ POWER CABLE MODE PICTURE WIDE SLEEP DISPLAY 3 Press V/v to select “Caption Vision” then press . , TOP MENU FAVORITES MENU 1, 5 2-4 Watching the TV 4 Press V/v to select your desired Caption Vision, then press . , F1 F2 TV VIDEO 1/2/3 VIDEO 4 VIDEO 5 Select To Off Turn off Caption Vision.
Selecting the Picture Mode You can select one of three different Picture Modes that best suits the program you are watching. Furthermore, you can adjust the picture quality for each Picture Mode (see pages 60, 61). You can set a different Picture Mode for each video input that can be selected using the Input Select buttons, and store them in memory. DVD/ MUTING VCR Press PICTURE repeatedly until the desired mode appears.
Watching the TV 45
46
Original source 4:3 source (Standard definition source) Wide Zoom Watching the TV enlarge to fill the screen with minimum distortion Normal display 4:3 picture in original size Full enlarge the original picture horizontally to fill the screen Zoom enlarge the original picture without distorting aspect ratio Note When the TV receives a 720p or 1080i signal, “Normal” cannot be selected.
1 Press MENU. , 2 Press V/v to select . (Screen), then press , 3 Press V/v to select the option you want to set, then press . , 4 Press V/v to select the desired screen mode, then . press , 5 48 Press MENU to exit the menu screen.
The Wide Screen Mode options available in the Option Wide Mode Select a Wide Mode to use for 4:3 sources. Description Wide Zoom Normal Full 4:3 Default Select the default Screen Mode to use for 4:3 sources. (Screen) menu Select to enlarge to fill the screen with minimum distortion. Select to display 4:3 picture in original size when the original source is 4:3 (Standard definition source).
Using the Freeze Function Using the Center Speaker Feature You can use this feature to write down information such as phone numbers, recipes, etc. You can use the TV’s speakers as the center speaker of your audio system and control its sound volume from the remote control of the TV.
2 Press V/v to select (Audio), then press . Listening to the center speaker sound from the TV’s speakers , 3 Press V/v to select “Center Speaker Mode” then press . F1 F2 TV VIDEO 1/2/3 VIDEO 4 VIDEO 5 , 1 2 Watching the TV RESET FREEZE MTS/SAP 4 GUIDE Press V/v to select the video input (Video 1-5) you want to use the TV’s speakers as the center speaker, then press .
Adjusting the phase of the sound 2 Press V/v to select (Audio), then press Audio You can adjust the phase of sound when using the TV’s speakers as the center speaker. If sound from the TV’s speakers (as the center speaker) sound unnatural, select “Reverse.” . Video 1 Return Treble: Bass: Balance: Steady Sound: Effect: MTS: Speaker: Center Speaker Mode Phase: Normal Audio Out: , Note Select: Default setting is “Normal.
Setting the Video Inputs 1 For video input 1, 2 and 3 Press VIDEO 1/2/3 repeatedly until the desired video input appears. Each time you press VIDEO 1/2/3, the input changes as follows. You can enjoy images (and sound) from optional video equipment connected to this unit by selecting the appropriate input. For details on connection, see pages 23 through 36.
3 Using the Video Label and Skip Feature Press V/v to select “Video Label,” then press . You can make settings for each video input by choosing the label displayed on the screen. , Tip If you select “Skip,” your TV skips this input when you press the Input Select buttons. 4 Press V/v to select the video input (Video 1-5) you want to assign a label, then press . , 5 Press V/v to select the label, then press . , 1 To skip the unused video input using the Input Select buttons Press MENU.
Using Favorite Channels 2 Press V/v to select . 3 Press V/v to select “Favorite Channels,” then press . (Channel), then press You can select program channels from a list of favorite channels that you preset. Setting your favorite channels 2-6 1 Watching the TV Tip 1, 7 If you cannot select “Favorite Channels,” change the input to TV by pressing the TV button. 4 Press V/v to select the position you want to change, then press . 5 Press V/v to scroll through the channels until .
Watching favorite channels DVD/ MUTING VCR Using the Channel Label Feature SAT/ POWER CABLE If you have set an optional label for the channel display or for Favorite Channels, you can have that label displayed on the screen. MODE PICTURE WIDE SLEEP DISPLAY DVD/ MUTING VCR SAT/ POWER CABLE MODE PICTURE WIDE SLEEP DISPLAY TOP MENU FAVORITES MENU 1 2 TOP MENU FAVORITES MENU 1, 9 F1 2-8 F2 1 Press FAVORITES. F1 The Favorite Channels list appears.
2 Press V/v to select . Channel , 7 (Channel), then press You can add up to 5 characters to the label. TV Return Favorite Channels Cable: Channel Fix: Auto Program: Channel Skip/Add Channel Label Press V/v to scroll through the label characters (A-Z, 0-9, etc.), then press . On Off OK , Select: 3 Back: Set: Exit: Press V/v to select “Channel Label,” then press . Channel TV 8 Repeat steps 4 - 7 to assign labels to more channels. 9 Press MENU to exit the menu screen.
Using Advanced Features 1 Receive the picture you want to adjust, then press MENU.
Adjusting the Picture Position Horizontally 1 Receive the picture you want to adjust, then press MENU. You can move the position of the picture left and right in the window. This function allows for horizontal adjustment of the picture being displayed. DVD/ MUTING VCR Return Mode: Picture: Brightness: Color: Hue: Sharpness: Backlight: Color Temp.
Adjusting the Picture Quality You can adjust the picture quality for each Picture Mode (“Vivid,” “Standard,” or “Pro”). You can adjust the picture quality for each video input selected using the Input Select buttons, and store these adjustments in memory. DVD/ MUTING VCR 1 Press MENU. TV Video Return Mode: Picture: Brightness: Color: Hue: Sharpness: Backlight: Color Temp.: NR: Mild Mode: Dynamic Picture: CineMotion: Select: , 2 Press V/v to select .
6 Press V/v/B/b to make the desired adjustment, then press . Adjustable options Option Press v/B Press V/b Picture To reduce picture contrast. To enhance picture contrast. Brightness To darken the picture. To brighten the picture. Color To decrease color To increase intensity. color intensity. Hue* To decrease the green tones. To increase the green tones. Sharpness To soften the picture. To sharpen the picture. Backlight To darken the screen. To brighten the screen.
1 Press MENU. 2 Press V/v to select 3 Press V/v to select the option you want to adjust, then press . 4 Press V/v/B/b to make the desired adjustment, . then press (Audio), then press .
Adjustable options Option Press v/B Press V/b Treble* To decrease higherpitched sounds. To increase higherpitched sounds. Bass* To decrease lowerpitched sounds. To increase lowerpitched sounds. Balance* To emphasize the left speaker. To emphasize the right speaker. TOP MENU FAVORITES MENU Selective options 1, 5 Option Steady Sound* 2-4 Effect** * To adjust any of these options, set “Speaker” in the (Audio) menu to “On,” or “Audio Out” to “Variable” first.
Selecting the TV Speakers or an External Amplifier to Listen to the TV You can select if you want to listen to the TV from the TV speakers or from an external amplifier connected to the TV’s audio outputs.
1 Press MENU. Selecting How to Control the Volume of the TV’s Speakers , 2 You can select how to control the volume of the TV’s speakers when an external amplifier is connected to the TV’s audio outputs. Press V/v to select (Audio), then press . DVD/ MUTING VCR MODE PICTURE WIDE SLEEP DISPLAY , 3 SAT/ POWER CABLE Press V/v to select “Speaker,” then press Audio . TV TOP MENU FAVORITES MENU , Select: 2-4 Exit: Option Description Speaker On Select to turn on the TV speakers.
2 Press V/v to select (Audio), then press Audio TV Return Treble: 0 Bass: 0 Balance: 0 Steady Sound: Auto Effect: Off MTS: Stereo Speaker: Off Center Speaker Mode Phase: Audio Out: , Select: 3 Back: Set: , Exit: TV Return Treble: 0 Bass: 0 Balance: 0 Steady Sound: Auto Effect: Off MTS: Stereo Speaker: Off Center Speaker Mode Phase: Audio Out: Variable Fixed Select: Option Back: Set: Fixed Exit: The TV’s speakers are turned off, but the audio output from your audio system can still be contro
Activating the Parental Control feature DVD/ MUTING VCR SAT/ POWER CABLE MODE PICTURE WIDE SLEEP DISPLAY 3 Enter a four-digit password using the 0-9 buttons, then, press . 1 2 3 4 5 6 7 8 9 Parent , TV Enter password using 0-9 buttons - - - - 0 Back: 3 4 The Parent menu options appear. Parent TOP MENU FAVORITES MENU TV Return Lock: Select Country: Change Password 1, 9 2, 4-8 Exit: Select: Off U.S.A.
6 Press V/v to select your country/region (U.S.A. or Canada), then press . To view blocked programs You can view blocked programs by entering the password. 1 Press ENT (enter) when tuned to a blocked program. , 2 Enter your four-digit password using the 0-9 buttons. The Parental Control feature will be canceled temporarily until you turn the TV off. 7 Press V/v to select “Lock,” then press . To deactivate the Parental Control feature Set “Lock” to “Off” in the (Parent) menu.
3 Selecting a Custom Rating If you want to select the ratings to be blocked from “Custom” once you have activated the Parental Control feature (page 67), follow the procedure below. For a detailed description of each rating, see “What the Ratings Mean” on page 71. Press V/v to select “Movie Rating,” then press . Parent TV Movie Rating Return G: – PG: – PG-13: – R: – NC-17: – X: – , Select: 4 Back: Set: Press V/v to select the rating to be blocked, then press .
6 7 To select a TV rating in U.S.A.: Press V/v to select “TV Rating,” then press . Parent , indication automatically appears beside The the selected rating and all ratings below it, indicating that the programs that match the ratings will be blocked. TV TV Rating Return Rating TV-Y: – TV-Y7: – TV-G: – TV-PG: – TV-14: – TV-MA: – Press V/v to select the TV rating to be blocked, then press . Content FV: – Example: TV rating in U.S.A.
9 Repeat step 8 for other extenders. All programs that match the ratings you select and higher, except for the extenders that were canceled, will be blocked. 10 Press MENU to exit the menu screen. To block programs or movies broadcast without a rating Unrated option allows you to block programs or movies that are broadcast without a rating. The unrated option is available only when you have selected U.S.A. as your country/region. What the Ratings Mean Ratings in the U.S.A.
U.S. movie ratings U.S. movie ratings are for movies (including those shown on TV) rated according to the Motion Picture Association of America (MPAA) Guidelines. Option Description G (General Audiences — All Ages Admitted) In G-rated films, no strong words are used, the violence is at a minimum, nudity and sex scenes are not present, nor is there any drug use.
About the extenders of U.S. TV ratings TV-Y7, TV-PG, TV-14 and TV-MA ratings have additional content ratings called “extenders” to define additional viewing limits. The extenders are defined as follows: Option Description FV (Fantasy Violence) Programs containing cartoon violence occurring in TV-Y7 programs only. D (sexually suggestive Dialog) Programs containing suggestive dialog, or sexual innuendo. L (coarse Language) Programs containing coarse language.
Canadian English Language ratings The Canadian English Language ratings are for TV programs in English broadcast in Canada. Description Option Description C (Programming intended for children under the age of 8) There will be no realistic scenes of violence or no offensive language, nudity or sexual content. Careful attention is paid to themes, which could threaten children’s sense of security and well-being. G (General) Programming intended for audience of all ages.
Turning Off the TV Automatically Press SLEEP repeatedly until the desired period of time appears. Each time you press the button, the period of time changes as follows: You can set the TV to turn off automatically after a predetermined period of time (15, 30, 45, 60, or 90 minutes). , Sleep Off Sleep 15 DVD/ MUTING VCR Sleep 30 SAT/ POWER CABLE Sleep 45 Sleep 60 MODE PICTURE WIDE SLEEP DISPLAY Sleep 90 SLEEP While the Sleep timer is activated, the LED on the TV lights up in red.
Additional Information Troubleshooting Self-diagnosis function The TV is equipped with a self-diagnosis function. If there is a problem with your TV, the 1 (Power on/ Stand by) LED on the front panel will flash repeatedly in red. Writing down the duration of flashes and interval between flashes helps you inform qualified Sony personnel of the TV’s condition. 1 (Power on/ Stand by) LED (flashing in red) 1 Measure how long the 1 (Power on/Stand by) LED flashes and stops flashing.
Problem Poor picture. Double images or ghosts. Possible remedies • Check antenna/cable connections. • Check the antenna location and direction. Only snow and noise appear on the screen. • Check if the antenna is broken or bent. • Check if the antenna has reached the end of its serviceable life. (3-5 years in normal use, 1-2 years at the seaside.) Dotted lines or stripes. • Keep the TV away from noise sources such as cars, motorcycles, or hair-dryers. No color./Dark picture./ Color is not correct.
Specifications Television system: American TV standard Channel coverage: VHF: 2-13/UHF: 14-69/CATV: 1-125 Headphones: Stereo mini jack Impedance: Antenna: 75-ohm external terminal for VHF/UHF Speaker: Full range: Screen size (measured diagonally): 32 inches Woofer: Panel System: LCD (Liquid Crystal Display) Panel Display resolution: 1,366 dots (horizontal) × 768 lines (vertical) VIDEO 1/2/3 IN: S VIDEO (4-pin mini DIN): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative C: 0.
Index 4:3 Default ............................................ 49 A E R Effect .................................................... 45 Remote control ..................................... 13 battery installation ............................ 13 programming .................................... 16 using with other equipment .............. 18 Adjusting picture position ........................... 58, 59 picture quality ................................... 60 sound quality ..................................
Printed on 100% recycled paper.
