Help Guide

89
GB
Table of
contents
Sample photo Menu Index
1 MENU t [Brightness/Color] t [White Balance] t [Custom Setup].
2 Hold the camera so that the white area fully covers the AF area located in
the center, and then press the shutter button down.
The shutter clicks and the calibrated values (color temperature and color filter) are displayed.
3 To call the custom white balance setting, MENU t [Brightness/Color] t
[White Balance] t [Custom].
You can finely adjust the color tones with OPTION.
• If the flash is used when the shutter button is pressed, a custom white balance is registered with the flash
light taken into account. Take pictures with the flash in later shootings.
• The message “Custom WB Error” indicates that the value is beyond the expected range, when the flash is
used on a subject in close proximity or a subject with a bright color is in the frame. In such cases, the
value is registered automatically, and the indicator turns yellow on the recording information
display.
You can shoot at this point, but it is recommended that you set the white balance again to get a
more accurate white balance value.
Custom White Balance
Notes