Download

30
US
Specifications
Amplifier section
USA models:
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC)
Front L + Front R:
With 4 ohms loads, both channels
driven, from 200 Hz – 20,000 Hz; rated
15 watts per channel minimum RMS
power, with no more than 1% total
harmonic distortion from
250 milliwatts to rated output.
POWER OUTPUT (reference)
Front L/Front R: 100 W (per channel at
4ohms, 1kHz)
Canadian models:
POWER OUTPUT (rated)
Front L + Front R:
30 W + 30 W (at 4 ohms, 1 kHz, 1% THD)
POWER OUTPUT (reference)
Front L/Front R: 100 W (per channel at
4ohms, 1kHz)
Inputs
USB
TV IN OPTICAL
Output
HDMI OUT TV (ARC)
HDMI section
Connector
Type A (19pin)
USB section
(USB) port
Type A
BLUETOOTH section
Communication system
BLUETOOTH Specification version 4.2
Output
BLUETOOTH Specification Power
Class 1
Maximum communication range
Line of sight approx. 25 m (82 ft)
1)
Frequency band
2.4 GHz band (2.4000 GHz –
2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles
2)
A2DP 1.2 (Advanced Audio Distribution
Profile)
AVRCP 1.6 (Audio Video Remote
Control Profile)
Supported Codecs
3
)
SBC
4)
Transmission range (A2DP)
20 Hz – 20,000 Hz (Sampling
frequency 32 kHz, 44.1 kHz, 48 kHz)
1)
The actual range will vary depending on
factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
cordless phone, reception sensitivity,
antenna’s performance, operating
system, software application, etc.
2)
BLUETOOTH standard profiles indicate
the purpose of BLUETOOTH
communication between devices.
3)
Codec: Audio signal compression and
conversion format
4)
Subband Codec
Front L/Front R speaker section
Speaker system
Full range speaker system, Acoustic
suspension
Speaker
40 mm (1
5
/
8
in) × 100 mm (4 in) cone
type × 2
General
Power requirements
120 V AC, 60 Hz
Power consumption
On: 40 W
Standby: 0.5 W or less (Power saving
mode)
(When Control for HDMI function and
BLUETOOTH Standby mode are set to
off)
Standby: 2.8 W or less
5)
(When Control for HDMI function and
BLUETOOTH standby mode are set to
on)
Bar Speaker (SA-CT290/
SA-CT291)