Download

13
US
Listening to the sound
• To view the USB content list on the TV
screen, make sure you connect the
system to the TV using HDMI cable.
• Change the input of the TV to the input
which the Bar Speaker is connected.
1 Connect the USB device to the
(USB) port.
Refer to the operating instructions
of the USB device before
connecting.
The USB indicator flashes
continuously when reading the USB
device.
2 Press INPUT repeatedly to select
“USB”.
The USB content list appears on the
TV screen.
3 Press / to select the content
you want, then press ENTER.
The selected content starts playing.
4 Press PLAY MODE repeatedly to
select the play mode you want.
• None: Plays back all tracks.
• (Repeat One): Repeats one
track.
• (Repeat Folder): Repeats all
tracks in a folder.
• (Random): Repeats all tracks in
a folder in random order.
• (Repeat All): Repeats all
tracks.
The USB indicator flashes three
times each time you press PLAY
MODE.
5 Adjust the volume.
• Press  +/– to adjust the Bar
Speaker volume.
• Press SW  +/– to adjust the
subwoofer volume.
Other operations
• Do not remove the USB device during
operation. To avoid data corruption or
damage to the USB device, turn off the
system before removing the USB device.
• The USB indicator flashes twice
continuously if you connect an
unsupported USB device.
Note
To Do this
Stop playback or return
to previous display
Press BACK
Pause or resume
playback
Press 
Select the previous
or next track
Press /
Search backward or
forward (rewind/
fast forward)
Hold down
/
Note