Download

11
US
Installing the system
1 Prepare screws (not supplied) that
are suitable for the holes on the
rear of the Bar Speaker.
2 Stick the WALL MOUNT TEMPLATE
(supplied) on a wall.
1 Align TV CENTER LINE () of the
WALL MOUNT TEMPLATE with the
center line of your TV.
2 Align TV BOTTOM LINE () of the
WALL MOUNT TEMPLATE with the
bottom of your TV.
3 Stick the WALL MOUNT TEMPLATE on
the wall using a commercially
available adhesive tape, etc.
3 Mark the screw positions on the
SCREW LINE () of the WALL
MOUNT TEMPLATE.
Measure the distance described
below with a scale, then mark using
a pencil, etc.
4 Fasten the screws into the marks.
The screws should protrude by
7.5 mm to 8.5 mm (approx.
5
/
16
in to
11
/
32
in).
5 Remove the wall mount template.
6 Hang the Bar Speaker on the
screws.
Align the holes on the rear of the
Bar Speaker with the screws, then
hang the Bar Speaker on the two
screws.
4 mm (
3
/
16
in)
More than 30 mm (1
3
/
16
in)
5 mm
(
7
/
32
in)
Hole on the rear of the Bar Speaker
10 mm
(
13
/
32
in)
Center of the TV
Adhesive tape,
etc.
WALL MOUNT
TEMPLATE
365 mm
(14
3
/
8
in)
365 mm
(14
3
/
8
in)
Screw position
7.5 mm to
8.5 mm
(approx.
5
/
16
in
to
11
/
32
in)