Certificate

(i) - The max charge voltage noted in the column is the maximum voltage employed during the abnormal charging test of the secondary lithium

cell. However, the recommended charging voltage for lithium cells is 4.1 V.

(j) - These cells can be used in series or parallel up to a maximum of four cells of the same model number.

(o) - The max charge voltage noted in the column is the maximum voltage employed during the abnormal charging test of the secondary lithium

ion cell. However, the recommended charging voltage for lithium ion cells is 4.3V, unless indicated otherwise.

(p) - The max charge voltage noted in the column is the maximum voltage employed during the abnormal charging test of the secondary lithium

ion cell. However, the recommended charging voltage for lithium ion cells is 3.6 V, unless indicated otherwise.

(q) - The max charge voltage noted in the column is the maximum voltage employed during the abnormal charging test of the secondary lithium

ion cell. However, the recommended charging voltage for lithium ion cells is 4.35V, unless indicated otherwise.

(r) - "G6" or "6" may be followed by a series of alphanumeric characters and put near the model US18500GS on the cell, as it is considered a

suffix.

(s) - "W3" or "3" may be followed by a series of alphanumeric characters and put near the model US14430W on the cell, as it is considered a

suffix.

(t) - "3A" may be followed by a series of alphanumeric characters and put near the model US14400W on the cell, as it is considered a suffix.

* - These celles may have various pin, tab, insulating tube, ring and tape.

Note - For Footnote [e], description of "the maximum recommended charging voltage" is replaced to "the recommended charging voltage".

Marking: Company name or tradename "E" , "MH12566" , "S" , "SE" , "SF" , "Sony" , "Sony Energy" , "Sony Energytec" , "Sony Fukushima" ,

Recognized Component Mark, on the cell or smallest shipping package containing the cell.

Last Updated on 2017-06-06

Questions? Print this page Terms of Use Page Top

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured

under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up

Service. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide

Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-

misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with

permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the

Page 1

of 1

BBCV2.MH12566 - Lithium Batteries - Component

14.06.201

htt

://database.ul.com/c

in/XYV/tem

late/LISEXT/1FRAME/show

e.html?na

...