User's Guide

34
Before Using the Terminal
When using supplied Desktop Holder SO22
and AC Adapter 05 (optional) for charging, do
the following procedures.
･
Be sure to install the supplied attachment to
the desktop holder for charging (P.35). The
terminal cannot be charged on the Desktop
Holder without attachment.
1
Insert a microUSB plug of the AC
adapter into the charging jack on
the back side of the desktop
holder with the engraved side (B)
facing down ( ).
2
Unfold the power plug of the AC
adapter and insert it into an outlet.
3
Install the terminal to the Desktop
Holder and move it left or right
until it clicks.
･
When the terminal and the Desktop
Holder are correctly connected, the
notification LED of the terminal turns
on (P.43).
4
When charging is complete,
holding the desktop holder, lift the
terminal up to remove.
5
Remove the power plug of the AC
adapter from the power outlet.
6
Remove the microUSB plug of the
AC adapter from the desktop
holder.
Charging with Desktop Holder