User's Guide

173
Data communication
Sending data
1
Make sure that the NFC function is
enabled.
2
Display data to send on the screen.
3
Face the marks (NFC antenna
section) on the terminal and the
receiver's terminal each other.
･
"Touch to beam" appears.
4
Tap the screen that has become
small.
Receiving data
1
Make sure that the NFC function is
enabled.
2
Face the marks (NFC antenna
section) on the terminal and the
receiver's terminal each other.
･
When you receive data, appears on
the status bar. Drag the left part of the
status bar downwards
u
Tap [Beam
complete] to activate application
corresponding to the received data.
Follow the onscreen instructions.