User's Guide

172
Data communication
･
To send/receive data, enable NFC function in
advance (P.172).
･
Place 2 mobile phones in parallel position and
point marks (NFC antenna section) to each
other. Do not move them until sending/
receiving is complete.
･
Operations to send/receive and available data
to send/receive depend on the compatible
applications. Follow the onscreen
instructions.
･
If the License agreement screen appears
when sending/receiving data, read the
content and follow the onscreen instructions.
･
When pointing marks (NFC antenna
section) to each other, sending/receiving may
fail. In such case, operate again to send/
receive.
･
The terminal does not communicate with all
NFC devices.
･
Hold the mark (NFC antenna section) over
the device at the center horizontally. If
scanning fails even with it held in front of the
center of the scanner, slightly lift up the
terminal, or move it backwards/forwards or to
the left/right.
･
If there are metal objects between mark
(NFC antenna section) and the other device,
scanning may fail. Putting the terminal into a
case or cover may affect communication. In
that case, remove the case or cover.
Enabling NFC function
1
From the Home screen,
u
[Settings]
u
[More...].
2
Mark [NFC].
･
appears on the status bar.
･
Enabling NFC function activates
Android Beam automatically.