User's Guide

142
Settings
* Compatible with Wi-Fi CERTIFIED Miracast
™
Depending on usage environment, image or sound
may be interrupted or stopped.
Covering around the Wi-Fi/Bluetooth antenna with
your hand may affect the quality of
communications.
In this mode, the functions of using radio
wave transmissions such as calling, accessing
to the Internet (including sending/receiving
mails), etc. are disabled.
1
From the Home screen,
u
[Settings]
u
[More...].
2
Mark [Airplane mode].
･
When Airplane mode is on, appears
on the status bar.
❖
Information
･
Alternatively, press and hold
P
for over a second
u
Tap [Airplane mode] to set Airplane mode to on/off.
･
Even if Airplane mode is on, Wi-Fi, Bluetooth function
and NFC function can be turned on. Be careful not to
use these functions in a place where the use is
prohibited such as in a airplane or hospital.
Windows tethering Display the description about
Windows tethering.
To connect by Windows
tethering, set the following
beforehand.
･
Turn on Bluetooth function
of the terminal and the PC
(P.169).
･
Set security of Portable Wi-Fi
hotspot to "WPA2 PSK"
(P.145).
･
Pair the terminal and a PC
whose OS is Windows 8.1 or
later via Bluetooth (P.170).
DUALSHOCK
™
3
wireless controller
Use a commercially available
USB host cable to connect
DUALSHOCK
™
3 wireless
controller to the terminal.
Start MirrorLink
™
Set to allow a device
compatible with MirrorLink to
operate the terminal using
microUSB cable.
Copyright protected data
cannot be displayed.
USB Connectivity P. 1 7 4
Airplane mode