INSTRUCTION MANUAL 14.
Introduction ● "Instruction Manual" (PDF file) Operations and settings of each function are explained. It can be downloaded from NTT DOCOMO website. https://www.nttdocomo.co.jp/english/support/ trouble/manual/download/index.html Thank you for your purchase of "SO-05G". For proper use of the SO-05G, read this manual carefully before and while you use the SO-05G. * You can download the latest information of " ク イックスタートガイド (Quick Start Guide)".
Operation descriptions In this manual, each key (key icon) operation is described with P, x, y, r. And selection operations of the icons or function items on the touch screen are described as follows. Description From the Home screen, u[Settings]u [About tablet]. Operation From the Home screen, tap (Apps button), and then tap "Settings" on the next screen and "About tablet" on the following screen in order. Touch and hold an Keep touching an icon longer (1icon. 2 seconds).
Supplied accessories ･ ･ クイックスタートガイド (Quick Start Guide) (In Japanese only) SO-05G (with warranty) ･ SO-05G のご利用にあたっての注意事項 安全上／取り扱い上のご注意 (Notes on usage Safety/Handling precautions) (In Japanese only) ･ USB TV F connector conversion cable SO01 For optional accessories compatible with the terminal (optional) , refer to NTT DOCOMO website. https://www.nttdocomo.co.
Contents ■ Supplied accessories. . . . . . . . . . . . . . . . . 2 ■ About using the terminal . . . . . . . . . . . . 5 ■ Safety Precautions (Always follow these Phone . . . . . . . . . . . . . . . . . . . . . . 72 directions) . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ■ Handling precautions. . . . . . . . . . . . . . . 16 ■ Waterproofness/Dustproofness . . . . . 23 Making/Receiving a call.................................................... 72 Operations during a call .........................
Settings . . . . . . . . . . . . . . . . . . . 137 Appendix/Index . . . . . . . . . . . .188 Viewing the setting menu............................................ 137 WIRELESS & NETWORKS ................................................. 137 DEVICE....................................................................................... 147 PERSONAL............................................................................... 154 ACCOUNTS........................................................................
Contents/Precautions About using the terminal The terminal supports LTE, W-CDMA, GSM/ GPRS and Wireless LAN Systems. ･ Because a terminal operates using radio frequencies, it cannot be used inside a tunnel, underground, in a building or other locations where radio waves do not reach the terminal, in locations with weak radio wave condition, or out of Xi/FOMA service area.
The terminal automatically performs communication for synchronizing data, checking the latest software version, maintain connection with the server, etc. If you transmit a large amount of data such as downloading applications or watching video, a packet communication charge becomes high. Subscription of packet flat-rate service is highly recommended. ･ Depending on the applications or service you use, packet communication charge may be applied even in Wi-Fi communication.
For services provided by Google, refer to Google Terms of Service. For other web services, refer to each terms of service. ･ Applications and service contents are subject to change without prior notice. ･ The terminal supports only sp-mode, mopera U and Business mopera Internet. Other providers are not supported. ･ To use tethering, subscription of sp-mode is required. ･ Packet communication charge when using tethering varies depending on the charging plan you use.
■ The following symbols indicate specific directions. Indicates prohibited actions. Don’t 1. Handling the terminal, adapter, desktop holder, docomo mini UIM card, USB TV F connector conversion cable (common) DANGER Indicates not to disassemble. No disassembly No liquids No wet hands Do Unplug ■ Indicates not to use where it could get wet. Don’t Do not use, store or leave the equipment in hot places (e.g. by the fire, near a heater, under a kotatsu, in direct sunlight, in a car in the hot sun).
Do Use optional devices specified by NTT DOCOMO for the terminal. Failure to do so may cause fire, burns, injury or electric shock. CAUTION Don’t Do not place on an unstable or inclined platform. Doing so may cause the device to fall and cause injury. Don’t Do not keep in a place that is very humid, dusty, or subject to high temperature. Doing so may cause fire, burns or electric shock. WARNING Don’t Don’t Don’t Do Do Do not subject the equipment to excessive force or throw it.
2. Handling the terminal ■ Type of internal battery for the terminal is as follows. Display Li-ion 00 Don’t Type of Battery Lithium Ion Battery DANGER Don’t Do not throw the terminal into fire or apply heat. Doing so may cause internal battery to ignite, burst, heat or leak. Don’t Do not put excessive force such as sticking a nail into the terminal, hitting it with a hammer, or stepping on it. Doing so may cause internal battery to ignite, burst, heat or leak. Do If the internal battery fluid etc.
Do Do Do If you have a weak heart, set the vibrator or ringtone volume carefully. Failure to do so may affect your heart. Do If you are wearing any electronic medical equipment, check with the relevant medical electronic equipment manufacturer or vendor whether the operation may be affected by radio waves. The radio waves from the terminal may affect electronic medical equipment. Power off the terminal near electronic devices or equipment operating on high precision control or weak signals.
Don’t Don’t Do Do Do If the display is mistakenly damaged and when the liquid crystal runs out, do not get it on your skin such as face, hands, etc. Doing so may cause blindness or injury on your skin. If the liquid crystal gets in your eye or mouth, rinse with clean running water, and get medical treatment immediately. Also, if it gets on your skin or clothes, use something such as alcohol to wipe off and wash it with soap in clear water. Do not discard the battery together with other garbage.
Don’t Do not short-circuit the charging jack while it is connected to the power outlet or cigarette lighter socket. Do not touch the charging jack with your hands, fingers, or any part of your body. Doing so may cause fire, burns or electric shock. Don’t Do not place heavy objects on the adapter cord. Doing so may cause fire, burns or electric shock. Don’t When you insert and remove the AC adapter from power outlet, do not contact a metal strap or other metal objects with the jack.
Do Remove or insert the adapter to the terminal evenly without applying excessive force. Failure to do so may cause fire, burns, injury or electric shock. Unplug Always remove the power plug from the outlet or cigarette lighter when not using the adapter for an extended period. Failure to do so may cause fire, burns or electric shock. Unplug Immediately remove the power plug from the outlet or cigarette lighter socket if water or other fluids get into the adapter.
6.
Part Desktop holder (water contact label) USB TV F connector conversion cable (cord, connector) USB TV F connector conversion cable (F type connector case) USB TV F connector conversion cable (F type connector jack: metal part) USB TV F connector conversion cable (F type connector: jack circumference) USB TV F connector conversion cable (connector: metal part, latch) USB TV F connector conversion cable (connector: jack) USB TV F connector conversion cable (connector: jack circumference) Material Quality pa
･ Clean the terminals occasionally with a dry cotton swab. ･ If the jack is soiled, connection gets worse and it may cause power to be turned off or insufficient battery charge, so clean the jack with a dry cotton swab etc. When cleaning, be careful not to damage the terminals. ･ Do not leave the terminal near the air conditioning vent. Extreme temperature changes may produce condensation and corrode the internal parts of the terminal, causing it to malfunction. ･ Make sure to use the terminal etc.
･ Do not leave the camera under direct sunlight. The operating time of the internal battery varies depending on the operating environment and the degradation level of the internal battery. ･ Be careful especially about the following points when preserving the terminal. ･ If you do so, some of the elements may melt or become faded. ･ Usually, use the terminal with microSD card slot/docomo mini UIM card slot cover and microUSB jack cover closed.
When you use the power outlet with a mechanism to prevent the plug from being removed, follow the instructions on the outlet's user's manual. ･ Do not subject the equipment to a strong impact. Do not deform the charging jack. ･ Doing so may cause malfunction. Magnet is used for magnet connector that is between contacts of the desktop holder. Make sure that any iron sands or metal objects (clips etc.) are not adhered before attaching the terminal. Remove the foreign objects with a soft cloth etc., if any.
･ Do not insert the docomo mini UIM card on which any label or seal is stuck into the terminal. 8 : The estimated interference distance is 80 m or less. : The full band between 2400 MHz and 2483.5 MHz is used and the band of the mobile identification device can be avoided. Available channels vary depending on the country. For use in an aircraft, contact the airline beforehand. Doing so may cause malfunction.
■ Wireless LAN (WLAN) precautions ･ Wireless LAN (WLAN) exchanges information using radio waves, and allows you to freely establish LAN connection if you are within an area where radio wave reaches. On the other side, if you communicate without appropriate security settings, communications may be intercepted or hacked by malicious parties. It is recommended to make necessary security settings on your responsibility and expense.
■ NFC reader/writer function precautions NFC reader/writer function of the terminal uses weak waves requiring no licenses for radio stations. ･ They use 13.56 MHz frequency band. When using other reader/writer or P2P function in your surroundings, keep the terminal away sufficiently from them. Before using the FeliCa reader/writer, confirm that there are no radio stations using the same frequency band nearby. ･ For use in an aircraft, contact the airline beforehand.
Waterproofness/ Dustproofness SO-05G provides waterproofness property of IPX5*1, IPX8*2 and dustproofness property of IP5X*3 with microSD card slot/docomo mini UIM card slot cover and microUSB jack cover firmly attached. *1 IPX5 means that a phone keeps functioning after applying a jet flow of 12.5 L/min. from every direction from a distance of approximately 3 m for at least 3 minutes using water nozzle in 6.3 mm inner diameter.
･ You can use the terminal in a bathroom. - Do not immerse the terminal into a bathtub. Also, do not use the terminal in hot water. Doing so may cause malfunction. If you should fall the terminal into the bathtub, immediately pick it up to drain water in specified procedure (P.27). - Never put the terminal in hot spring water or water containing soap, detergent or bath powder. In case the terminal gets wet with water other than tap water, wash it in the procedure above.
■ Opening the microSD card slot/ docomo mini UIM card slot cover and micoUSB jack cover Open the covers with your fingertip by the grooves. ■ Closing the microSD card slot/docomo mini UIM card slot cover and microUSB jack cover Set back the cover in the direction of the arrow and press parts in firmly, then ensure there are no gaps. It is recommended to replace the parts for maintaining waterproof/dustproof property once every two years regardless of whether any abnormality is present.
Do not perform actions shown in the illustrations below. Using Soap/Detergent/ Washing with brush/sponge Bath powder Soaking in ocean water Machinewashing Using in hot spring Do not put the terminal in hot water, use it in a sauna or apply hot airflow (from a hair dryer etc.) to it. ･ Do not move the terminal in water or slam the terminal against the surface of water. ･ If you put the terminal in tap water, be sure to have it within 30 minutes.
･ Do not connect USB TV F connector conversion cable, earphones, etc. with the terminal wet with water. Doing so may cause malfunction. b Shake the terminal approximately 20 times, firmly holding it, until there is no more water splattering. c Swing the terminal in about 10 times against dry, clean cloth etc.
･ Dry the terminal naturally for about 3 hours at room temperature. Notes on charging Check the following before and after charging. ･ Check if the terminal is not wet. Never charge the battery when the terminal is wet. ･ Accessories and optional devices are not waterproof/dustproof. ･ When charging the battery when or after the terminal is wet, adequately drain it and wipe off water with a dry, clean cloth etc., before connecting the supplied desktop holder or opening the microUSB jack cover.
Part names and functions a b c e d f g h m n o n p q r a b c d e j k l i i Headset jack microSD card slot/docomo nano UIM card slot Microphone TV/Mobcas antenna Illuminance sensor : Used for auto-control of screen brightness.
docomo mini UIM card The docomo mini UIM card is an IC card recorded user information such as your phone number etc. ･ You can use the terminal with docomo mini UIM card. If you have a UIM or FOMA card, bring it to a docomo Shop to replace. ･ When docomo mini UIM card is not inserted to the terminal, making calls, packet communication, etc. are not available. ･ For details on docomo mini UIM card, refer to the docomo mini UIM card manual.
2 Set docomo mini UIM card into the tray with IC facing up ( ), then insert the tray with the card and press it all the way into the terminal. ･ Removing docomo mini UIM card 1 Open the docomo mini UIM card slot cover, then hook your fingertip on the projection part of the tray to pull the tray straight out to remove it from the terminal. 2 Remove the docomo mini UIM card from the tray ( ), then insert the tray into the terminal and press it straight all the way.
CE mark and FCC ID 1 Open the slot cover, and insert a fingernail into the hook at the edge of the label tray, then pull it out straight. Charging The internal battery is not fully charged at the time of purchase. ･ Estimated charging time (P.207) Operation time on full charge (estimate) The charging time varies by the internal battery condition or operating environment. ･ "Continuous standby time", "Continuous call time" (P.
Life of the internal battery The internal battery is a consumable part. Each time the internal battery is recharged, the battery usage time per one charge gradually decreases. ･ When the battery usage time per one charge becomes about half of that at the time of purchased, replacing the internal battery is recommended because the internal battery is near the end of life. ･ Watching TV etc. for a long time while charging may shorten the lifetime of the internal battery.
Charging with Desktop Holder 2 Unfold the power plug of the AC adapter and insert it into an outlet. When using supplied Desktop Holder SO22 and AC Adapter 05 (optional) for charging, do the following procedures. ･ Be sure to install the supplied attachment to the desktop holder for charging (P.35). The terminal cannot be charged on the Desktop Holder without attachment. 3 Install the terminal to the Desktop Holder and move it left or right until it clicks.
Attaching the attachment Attach the supplied attachment to the desktop holder. 1 Check the shape of front/back of the attachment and the attaching part of the desktop holder, then fit the attachment with the desktop holder. 2 Firmly press the attachment straight and make sure that there are no gaps between the attachment and the desktop holder. Charging with AC adapter When using AC Adapter 05 (optional) for charging, do the following procedures. ･ Opening/closing microUSB jack cover (P.
3 When charging is complete, remove the power plug of the AC adapter from the power outlet. 4 Remove the microUSB plug of the AC adapter evenly from the terminal. 5 Turning power on/off Turning power on 1 Close the microUSB jack cover, firmly press it and make sure that there are no gaps between the terminal and cover. The terminal vibrates and lock screen appears after a while. ･ When you first turn on the terminal after purchasing, follow the onscreen instructions to make initial settings (P.38).
❖Information If the battery level is low, the notification LED flashes in red 3 times when P is pressed to turn the power on. Charge the terminal (P.32). ･ When SIM card lock (P.158) is set, enter PIN code on the PIN code entry screen (P.158). Canceling the screen lock ･ Turning power off 1 2 Press and hold P for over a second. [Power off]u[OK].
Adding widgets on the lock screen You can add widgets such as calendar, clock, etc. on the lock screen. ･ Enable the widget on the lock screen in advance (P.155). 1 2 On the lock screen, drag the digital clock widget right. uTap a widget to add. ･ Initial settings When you first turn on the terminal after purchasing, follow the onscreen instructions to make initial settings for language, services, etc. 1 ･ Flick the screen to the right in a rowuTap to set up to 5 widgets.
3 When the initial settings screen for docomo services appears, mark "Agree to all"u[Start settings]. ･ After this step, follow the onscreen instructions and tap [Next]. - Set docomo ID - Set docomo cloud - Set docomo apps password - Set whether to provide location information - Set Remote Initialization Service* - Select whether to install all applications now or later * It does not appear if docomo apps password is not set. 4 [Start using]. ･ The operation guide of the Home screen appears.
Operations on the touch screen ■ Tap Touch an item such as icon or menu with your finger lightly and release it. ･ Double-tap means tapping twice quickly. ■ ■ Pinch Touch the screen with two fingers and widen (pinch-out) or narrow (pinch-in) the fingers' distance. On some screens, pinchout to zoom in and pinch-in to zoom out. Touch and hold Touch and hold an icon or menu item long. ■ Flick (Swipe) Touch the screen and flick up/down/left/ right.
Basic key icon operation x y r x Back Go back to the previous screen. Or close a dialog box, an option menu, the Notification panel, etc. y Home Go to the Home screen. Touch and hold the icon and drag to to activate " しゃべってコン シェル (Shabette concier)" or "Google" application, or drag to to activate "What's New". r Recently Display recently used applications used apps in thumbnail list to activate or delete applications from the list (P.57). Also, use or set small apps (P.58).
Setting silent mode Capturing screenshot 1 Press and hold P for over a second. You can save the current displayed screen as an image (screenshot). 2 Tap 1 / / . : Mute (Ringtone 0) : Vibrate : Cancel silent mode ･ ❖Information Press and hold the volume down key to set vibrator and press the volume down key while the vibrator is set to set mute. On the lock screen, during a call, in some applications such as Camera and WALKMAN, silent mode cannot be set even if the volume down key is pressed.
Notification LED Notification LED provides information on the terminal status, incoming calls, mail reception, etc. ･ Notification LED when STAMINA® mode is set (P.
Connecting to Bluetooth device Airplane mode activated Silent mode (vibration) ON Silent mode (mute) ON Microphone set to mute* Alarm is set NFC function ON Positioning with GPS Battery status The battery is charging Battery is low (4％ or less) PUK code locked or docomo mini UIM card not inserted STAMINA mode ON Low battery mode ON * Appears when switched to the Home screen etc. ❖Information ･ Status icons displayed in the status bar can be changed (P.147).
Omakase Lock set to the terminal and docomo mini UIM card Omakase Lock set to the terminal or docomo mini UIM card Receiving/dialing*/during a call* Call on hold* Missed call Phone memo recorded New voice mail Event notification for Schedule Stopwatch is running Timer in use Alarm sounding Playing a track with Media Player Playing a track with WALKMAN Receiving Mobacas Watching TV*/notification of reserved watching Recording TV*/notification of reserved recording FM radio in use* USB connected MHL connected
Notification panel When notification icons appear on the status bar, you can open the Notification panel to check the notifications, activate corresponding application, etc. Quick settings Enable/disable functions. 1 Drag the right part of the status bar downwards. a Drag the left of the status bar downwards. 1 b a b a Edit ･ Change the number of tools or sort order. b Quick settings a b Notifications Clear ･ Clear contents on the Notification panel. Some notifications may not be cleared.
STAMINA Settings c d e f g Enable/disable STAMINA mode. Display Settings menu (P.137). Home screen ❖Information You can switch the Home screen of the terminal to "docomo LIVE UX", "Xperia™ Home" or "Simple Home". ･ "docomo LIVE UX" (P.66) ･ "Simple Home" (P.50) ･ Switching home applications (P.59) ･ To change the initial home screen for operations, switch the home screen you want to change to, touch and hold the area of the Home screen where no icons are displayeduTap .
Adding a widget to the Home screen Adding a shortcut to the Home Widget is an application which can be added screen to the Home screen to use. Use a widget to start an application easily. 1 Touch and hold an area of the Home screen where no icons are displayed. ･ 2 1 Alternatively, pinch-in on the Home screen. [Widgets]uSelect a widget to add. ･ You can add shortcuts of application, bookmark, etc. When a settings screen appears, follow the onscreen instructions.
Adding folders on the Home screen 3 You can put applications, shortcuts, etc. added to the Home screen into a folder to manage them. 1 When you tap [Album], select an image u[Crop photo]/[Crop picture]u [Always]/[Just once]uAdjust cropping frame by dragging etc.u[Crop]/[Done]. ･ When you tap [Live Wallpapers], select a contentuTap [Set wallpaper]. ･ When you tap [Photos], select a photouTap [SET WALLPAPER]. ･ From the Home screen, touch and hold an iconuDrag it over another icon.
Simple Home screen Set Simple Home to use Home screen and setting menu limited to basic functions. From the Home screen, u[Settings]u[Home]u[Simple Home]u[OK]. ■ Applications on the Simple Home screen 1 Google Maps Camera TV Media Tools WALKMAN Album Movies YouTube FM radio NOTTV dmarket d ヒッツ (d hits) Calendar Alarm & clock Calculator Gmail Play Store dmenu しゃべってコンシェル P.59 P.130 P.113 P.105 P.53 P.124 P.53 P.126 P.112 P.99 P.97 P.55 P.53 P.132 P.54 P.92 P.97 P.97 P.
Using Settings 1 On the Simple Home screen, [Settings]. Saving applications in My Select If frequently used applications, etc are saved in the "My Select" folder, the applications can easily be activated My profile Check your own phone number and mail address, etc. Display Sleep Select a time duration before the screen back light turns off. Wallpaper Set wallpaper for Simple Home screen. Lock Set wallpaper for lock screen. screen wallpaper Font size Set font size for the "Contacts" application, etc.
e Xperia™ Application screen ❖Information Application screen displayed when "Preferred applications" is set to "Xperia™ applications" in the initial settings is explained here. ･ Switching Home application (P.59) 1 From the Home screen, ab On the leftmost application screen, flick to the right the screen (except for the left edge) to open the optional menu. ･ While sorting application icons, drag an icon to the right edge of the application screen to add an application screen. ･ .
Twitter Official Twitter client application. Post a short message on the website and communicate with someone else. Email Send and receive emails (multiple accounts are available). → P.88 Calendar Display a calendar and manage schedule. WALKMAN Playback music data stored on the internal storage or microSD card. Album View photos and videos you took, and images posted on Facebook or Picasa. → P.124 Movies Play downloaded contents with Video Unlimited or videos that are transferred from a PC to the terminal.
Alarm & clock Set alarms or display clock. → P.132 Calculator Use calculator. Sketch Create illustrations or load photos to edit. FM radio Use FM radio. → P.112 File Commander You can easily find still pictures, videos, music data, downloaded files, etc. → P.167 OfficeSuite View and read Office documents etc. Evernote Create memos, images, sound data and manage them. docomo mail Send/receive mails using DOCOMO mail address (@docomo.ne.jp). Sent/received mails are saved in cloud.
Phone Use phone or make phone settings. → P.72 dmenu An application shortcut for "dmenu". In "dmenu", you can easily find contents you used in i-mode and joyful and convenient contents for smartphones. → P.97 dmarket There are various products such as music, ebooks, etc. You can purchase them that suits your needs. → P.97 d ヒッツ (d hits) An application for using d ヒッツ (d hits). ｉコンシェル (i-concier) An application for using i-concier.
Disaster kit An application for using Disaster Message Board, Disaster Voice Messaging Service and Early Warning "Area Mail". → P.93 遠隔サポート (Remote support) An application for using " スマートフォンあんし ん遠隔サポート (Smartphone Anshin Remote Support)". " スマートフォンあんしん遠隔サポー ト (Smartphone Anshin Remote Support)" is a service that allows staff of the Call center to support the terminal operations by remotechecking the display of your own terminal. → P.195 Instruction Manual Display the terminal instruction manual.
1 2 3 On the application screen, flick the left edge of the screen to rightu[Uninstall]. Tap an application icon with . [Uninstall]. Adding a folder to the application screen When the order of application icons (P.52) is set to "Own order", application icons can be saved in folders and managed. 1 On the application screen, touch and hold an iconuDrag it over another icon. ❖Information To move an icon to a folder, on the application screen, touch and hold an icon you want to moveuDrag it over a folder.
Small apps Adding small apps You can use a small app (application displayed in a small window) such as Browser while using another application. Applications downloaded from Google Play or widgets can be added to small apps. 1 ru 2 Touch and hold a small app or widget to adduDrag it to the small apps bar (Favorites). Using small apps ❖Information 1 r. 2 Select a small app to use. ･ The set small apps appear in the small apps bar (Favorites) at the bottom of the screen.
Switching Home application In the terminal, you can switch the Home screen between "docomo" or "Xperia™". 1 From the Home screen, u[Settings]u[Personalization] u[Preferred apps settings]. 2 [Set all to]/[Home screen]. 3 4 ･ When "Set all to" is selected, you can set home application, lock screen, phonebook application and application for playing videos or music all at once. [docomo]/[Xperia™]. [OK].
Search settings You can set to use for search box or set search objectives in the terminal. 1 2 3 From the Home screen, tap the Google Search widget. at the bottom of the screenu u[Settings]. Select an item. ❖Information ･ Even if you select "Tablet search" in Step 3, search target may not appear. POBox Plus 使い方ガイド (Help & Tips for Xperia™ Japanese keyboard) Character input method for the terminal is set to"Xperia™ Japanese keyboard" by default when the language is set to 日本語 (Japanese).
❖Information When the language is set to English, the default input method is set to "International keyboard". To use the Japanese keyboard, tap [Xperia™ Japanese keyboard] in Step 3. In this manual, explanations are given only for "Xperia™ Japanese keyboard". ･ Alternatively, while entering characters, drag the left of the status bar downwardsuTap [Choose input method] to select input method. ･ Software keyboard For Xperia™ Japanese keyboard, the following software keyboard can be used.
b Download Download plug-in applications (extensions) from website. Contact Picker P.64 2.3 Show/hide the quick tool bar. Character input method When you tap a key on the software keyboard, candidates list for the entered characters appears. Tap a word you want to enter from the candidate list, text can be input one after another. a b c d e QWERTY a b j e d f g h c i j g i f h Keypad i g h j e k l f Handwriting pad a Quick tool bar Display shortcuts of frequently-used functions.
h Enter a line feed. * i j k l Appears before fixing character and fixes the character. * In some screens, , " 次へ (Next)", " 完了 (Done)", " 実行 (Go)", etc. appear. Move the cursor to the right. When there is an unfixed character string with the cursor at the right end, tap to enter the same character as the one at the end (Except for Handwriting input). - When entering characters, tap to delete entered characters. ･ Note the following when you use Handwriting input.
･ Ex: To enter " あお " a Tap " あ " onceuWait approximately 1 second (until the key color returns to the original). b Tap " あ " 5 times. or a Tap " あ " onceu (immediately). b Tap " あ " 5 times. Quoting contacts If contacts are registered to the Contacts, you can use "Contact Picker 2.3" to enter contact information when entering characters. 1 ･ Editing text On the character entry screen, double-tap character you want to edit so that text edit menu appears at the top of the screen.
My Words Register words to My Words beforehand to display the words as the preferred candidates when entering characters. 1 On the character entry screen, of the quick tool bar. ･ 2 3 4 5 6 If the quick tool bar does not appear, tap (for keypad in the character mode of "Alphabet" and "Numeric", tap / to switch to "Kana", then appears). [My Words]. . Tap the character input box for "Reading"uFill it out. Tap the character input box for "Word"uFill it out. [OK].
docomo LIVE UX Home screen Managing the Home screen Tapping y displays Home screen which consists of up to 7 screens you can use flicking left and right. e a b d c d f g "ひつじのしつじくん® (Butler Sheep)" ©NTT DOCOMO a b c d e f g Adding/Moving applications etc. to the Home screen Move application icons or add widgets or folders to the Home screen. 1 Touch and hold an area of the Home screen where no icons are displayed. 2 Any of [Show apps]/[Show widgets]/[Create folder]/[MachiChara display setting].
Moving an icon on the Home screen 1 2 ❖Information You can disable some applications or widget which cannot be uninstalled by dragging to "Disable app" in Step 2 (P.153). ･ From the Home screen, touch an icon you want to move. Drag it anywhere. ･ To move to another Home screen, keep touching the icon and drag it to left or right. Deleting an icon from the Home screen 1 From the Home screen, touch and hold an icon you want to delete. 2 Drag to "Back to apps list"/ "Remove from Home".
Changing wallpaper Adding a home screen 1 Touch and hold an area of the Home screen where no icons are displayed. 1 Touch and hold an area of the Home screen where no icons are displayed. 2 3 [Change wallpaper]. Tap a wallpaper you want to change. 2 3 [Home screens]. [Add Home screen]. ･ 4 Tap [See more wallpapers] to select from "Album", "Live Wallpapers", "Photos", or "Xperia™ wallpapers". When you select "Album", select an imageu[Crop photo]/[Crop picture]u[Always]/[Just once]uDrag etc.
Customizing the application screen Application screen 1 From the Home screen, ･ . Flick the Home screen downwards to display the application screen. a d e Moving/Adding an application or widget to the Home screen 1 On the application screen, touch and hold an icon you want to add to the Home screen. 2 Drag it to the Home screen display area at the bottom of the screen. b f c a Apps/Widgets/Wallpapers tab ･ Display application icons/widgets/wallpaper list.
❖Information You can disable some applications or widget which cannot be uninstalled by dragging to "Disable app" in Step 2 (P.153). ･ Moving application in the application icon list 1 On the application screen, touch and hold an icon to move. 2 Drag it anywhere. Using My Magazine My Magazine is a search service for displaying articles for categories you selected. It helps to set search words depending on your tendency of read articles or profile information to come close to your preference.
Setting categories u[My 1 From the Home screen, Magazine settings]. 2 [Display category setting]uMark categories to showu[OK]. ❖Information Tap [Set/Edit free word category] in Step 2 to add/ edit your favorite words as categories. Enter a wordu[OK]uTap [OK] to set to My Magazine. ･ Setting My Magazine to show/hide 1 From the Home screen, u[My Magazine settings]u[My Magazine display setting]. 2 [Show]/[Hide]u[OK].
Phone Making/Receiving a call Emergency call Emergency call Making a call 1 2 3 From the Home screen, u"Dial" tab. Enter a phone numberu . ･ ･ Tap to delete the number. Voice of the other party is emitted from the speaker. You are recommended to use commercially available headset for stable call. When the call is finished, [End call]. ❖Information In Step 2, tap without entering a phone number to enter the phone number registered as the latest call in Recent calls.
When calling 110, 119 or 118 for emergency from the terminal, tell that you are calling from a mobile phone, and give your phone number and your current location precisely for checking callback from the police/fire department. Also, make a point to call in a stationary position to prevent the call from being dropped. Do not power off the terminal for at least 10 minutes after the emergency call just in case the Police or Fire/Ambulance may have to get in contact with you.
Making an international call (WORLD CALL) For details on WORLD CALL, refer to DOCOMO International Services website. ･ Send replacing "+" by an international access code. 1 2 From the Home screen, u"Dial" tab. Dial + (touch and hold [0])uEnter Country code, Area code (City code), recipient number in the orderu . ･ 3 When "Auto conversion" in International dial assist is marked (P.186), the international dial assist screen appears when sending. Tap [Call original] or [Call].
Muting the ringtone for an incoming call 1 While receiving a call, press the volume key or P. ❖Information You can stop vibration by pressing the volume key or P when silent mode (vibration) is set. ･ On the Home screen etc., press the volume key to adjust the ringtone volume. ･ While receiving a call, drag (right) to (left). ❖Information ･ Even if the screen lock is set, you can reject a call by the same operation.
g Phonebook : View phonebook entry list screen (P.80). h Bluetooth : Connect to Bluetooth device for handsfree call ･ Pair the Bluetooth device in advance (P.170). ･ When connecting to paired Bluetooth device, / appears and you can tap it to switch the output of voice sound. i Hold : Set a call on hold/cancel hold ･ To set a call on hold, "Call waiting" subscription is required (P.78). ･ When you switch the another screen such as Home screen etc. during hold, appears on the status bar.
Adding a number from the Recent calls to Phonebook 1 When “Add to the existing contact” is selected, select a contact to save to. On the profile edit screen, enter necessary information such as name. ･ 4 Alternatively, on the Recent calls screen, touch and hold a phone numberu[Edit number before call]u[Register]. [Add new contact]/[Add to the existing contact].
･ Answering Machine When Answering Machine is set, the answering message is played when you cannot answer an incoming call and message from the caller can be recorded even if you are not subscriber of Voice Mail Service. Up to approximately 60 seconds per one can be recorded. 1 2 From the Home screen, u [Call settings]u[Answering Machine]. Answering Machine Pick up after Use while roaming Greetings Messages . Set whether to use Answering Machine. Set a ringing time for answering.
Network Service Roaming settings Phone ringtone Vibrate when ringing Caller ID display request service Second call settings Call notification Request number notification for calls without phone number with guidance. Set action for a second call. Notify incoming calls by message (SMS) while the power is off or you are out of service area. English Switch the voice guidance guidance to English or Japanese.
■ Phonebook Phonebook list screen On the phonebook list screen, you can view details of your contacts. You can add a photo or image to a phonebook entry, and display phonebook entries by group. On the phonebook, you can enter various information for contacts, for example, phone numbers, mail addresses and various service accounts. d e f ghi a Displaying phonebook 1 From the Home screen, "Contacts" tab. ･ uTap b j c k The phonebook list screen appears.
k l Register Photo/image set in the phonebook entry ･ Tap a photo/image to make a call or send a message (SMS) or mail. Making a call using the phonebook 1 From the Home screen, uTap "Contacts" tabuSelect a phonebook entry you want to make a call to. 2 On the profile information, tap a phone number. [Call]. Managing phonebook Adding a new phonebook entry 1 From the Home screen, uTap "Contacts" tabu[Register]. 2 On the profile edit screen, enter necessary information such as name.
Registering a phonebook entry to Favorites 1 From the Home screen, uTap "Contacts" tabuSelect a phonebook entry to add to Favorites. 2 On the profile information, tap Settings . ❖Information ･ To display phonebook entries added to Favorites, on the phonebook list screen, tap "Group" tabu[Favorites]. Using optional menu 1 Select and delete Login to cloud*1 Logout from cloud*2 Cloud menu*2 About Help From the Home screen, "Contacts" tabu .
Setting phonebook entries to Group uTap 1 From the Home screen, "Group" tab. 2 3 Tap a groupu[Edit]. [Add member]uMark phonebook entries to addu[OK]u[OK]. ❖Information ❖Information Groups in docomo account can be sorted. In Step 2, [Sort]uFollow the onscreen instructions. ･ Groups in docomo account can be edited/deleted. To edit/delete a group, touch and hold a groupu[Edit group]/[Delete group].
Importing/Exporting phonebook entries You can export/import phonebook entries from/to a microSD card or docomo mini UIM card. This is useful, for example, when you want to move the contact information to another phone. ･ You can also use a synchronization service for synchronizing your phonebook (P.141). ･ Insert a microSD card in advance (P.166). 1 2 From the Home screen, uTap "Contacts" tabu u[Others] u[Import/Export]. Select an item. After this step, follow the onscreen instructions.
Mail/Web browser docomo mail Message (SMS) Send/receive mails using DOCOMO mail address (@docomo.ne.jp). Pictograms and Deco-mail can be used, and automatic reception also is supported. Sent/received mails are stored to docomo mail server. Mails can be transferred readily in case the terminal is lost or you change the model. Additionally, with docomo ID, you can use mail on your desired environment such as a PC or tablet. For details of docomo mail, refer to NTT DOCOMO website.
❖Information ❖Information You can change default messaging application to Hangouts. From the Home screen, u[Settings]u[More...]u [Default SMS app]u[Hangouts]. ･ You can also send/receive text messages to/from customers of overseas network operators. For details, see "Mobile Phone User's Guide [International Services]" or the DOCOMO International Services website. ･ To send SMS to users of overseas network operators, enter "+", "Country code" and then "the recipient mobile phone number".
Deleting a message (SMS) 1 2 3 4 From the Home screen, u[Messaging]. Tap a sender/recipient whose messages (SMS) to delete. Touch and hold a message (SMS) to delete. [Delete message]u[Delete]. ❖Information To delete several messages (SMS), in Step 3, u[Delete messages]uMark messages (SMS) you want to deleteu u[Delete]. ･ Deleting messages (SMS) by sender/recipient 1 2 3 From the Home screen, u[Messaging]. Touch and hold a sender/recipient you want to delete. u[Delete].
Email You can create a POP3 or IMAP compatible email account provided by general ISP (provider), or an Exchange ActiveSync account to send or receive email. You can set multiple Email accounts. Making initial setting for Email Set an Email account following the onscreen instructions. 1 From the Home screen, u[Email]. ･ 2 Set check frequencyuMark required itemsu[Next]. ･ 5 If a screen for selecting type of account appears, tap an email account type and follow the onscreen instructions to set.
Creating and sending email 1 2 3 From the Home screen, u[Email]. (Compose). Enter the email address of recipient. Tap to select from the registered contacts. Enter in the search box at the top of the screen to display the contact list. ･ To enter multiple email addresses directly, separate with a comma (,) and then enter the next email address. ･ To add Cc or Bcc recipients, tap on the right of . ･ 4 5 Enter a subject and message. [Send].
Setting preview of Inbox 1 2 3 4 From the Home screen, u[Email]. Tap u[Settings]u[General]u [Preview pane]. Mark a screen to preview. [OK]. ❖Information If you have two or more accounts, change made in any of the accounts applies to all accounts. ･ To switch to the landscape view, turn Auto rotate screen on beforehand (P.41). ･ Replying/Forwarding email 1 2 ･ 3 4 2 3 From the Home screen, u[Email]. Tap an email with attached files. Deleting email 1 Tap [Save] of file you want to save.
Changing Email account settings 1 2 3 From the Home screen, u[Email]. u[Settings]. Tap an Email account you want to change the settings for. Account name Your name Change account name. Change your name (sender name). Signature Change your signature. Quick reply Register phrase that can be inserted when creating an email. Default account Set whether the account is the default account for creating emails.
Sending Gmail Gmail Set a Google account. You can use Gmail to send and receive emails. ･ If you do not set a Google account, set following the onscreen instructions (P.161). ･ If you do not synchronize Gmail after Google account is set, "Account not synced" screen appears. Follow the onscreen instructions. 1 2 3 When you enter a name or email address in the email address field, contacts matched to the entered numbers or letters are listed. ･ To add Cc or Bcc recipients, tap [Add Cc/Bcc].
Early Warning "Area Mail" It is a service with which you can receive earthquake early warning, etc. delivered by the Meteorological Agency. ･ Area Mail is a free service for which subscription is not required. ･ Area Mail cannot be received in the following case.
❖Information If savable amount of Area Mail exceeds the limit of maximum, the oldest one is deleted in order. ･ Other settings Deleting Area Mail 1 2 3 From the Home screen, u[Disaster kit]. [Early Warning "Area Mail"]. Mark Area Mail you want to deleteu[Delete]u[OK]. Setting Early Warning "Area Mail" 1 2 3 From the Home screen, u[Disaster kit]. [Early Warning "Area Mail"]. u[Settings]. Receive setting Beep tone Browser Use "Browser" application to view web pages like on a PC.
4 Select a candidate or [ 実行 (Go)] on the software keyboard. To zoom-in/-out web pages, pinch-out/ -in or double-tap the screen. ･ To go back to the previous page, tap x. ･ 1 To copy text on web page, touch and hold a text you want to copyuDrag or to select a range of text to copyuTap [Copy]. Open multiple tabs and view web pages. 1 From the Home screen, u . 2 Opening incognito tab You can view web pages without browsing history or search history. 1 From the Home screen, u u[New incognito tab].
Changing the Browser settings Set homepage, privacy and security, etc. 1 2 From the Home screen, u u[Settings]. Select an item to change. Operating links Opening a bookmark 1 2 ❖Information ･ Touch and hold a bookmark to edit or delete it. Checking history Touch and hold a link or image in web page to copy URL or save the image. 1 ❖Information 2 In some website, downloading of files etc. may not be available. ･ Managing bookmarks and history You can check history, save bookmarks, etc.
Apps dmenu In dmenu, you can easily access sites recommended by DOCOMO or convenient applications. 1 From the Home screen, [dmenu]. ･ dmarket You can obtain useful and interesting contents which meet your needs at dmarket. 1 Browser is activated, "dmenu" appears. ❖Information To use dmenu, Internet connection by packet communication (LTE/3G/GPRS) or Wi-Fi is required. ･ For connecting dmenu and downloading applications introduced in dmenu, packet communication charge is applied separately.
Installing applications Deleting application 1 From the Home screen, [Play Store]. 1 From the Home screen, [Play Store]. 2 Search applicationsuTap an application you want to install. 2 [Play Store] at the upper left of screenu[My apps]. Tap the applications you want to deleteu[UNINSTALL]u[OK]. Check the displayed contents carefully and follow the onscreen instructions. ･ Be careful especially about applications which access many functions or large amount of data.
ToruCa ToruCa is an electronic card that can be obtained by the terminal. It can be obtained from site as store information, coupon ticket, etc. Obtained ToruCa is saved to the "ToruCa" application and can be displayed, searched, and updated using "ToruCa" application. For details of ToruCa, refer to NTT DOCOMO website. ❖Information ･ ･ ･ ･ ･ ･ For obtaining, displaying or updating ToruCa, a packet communication charge may be applied.
･ Using Shift Time mode or recording requires memory in the internal storage or microSD card. Using a Class 4 or faster microSD card is recommended (Storage can be selected). TV/Mobacas antenna ･ Press down the stowed TV/Mobacas antenna to make the top end come out, then pull it out. Fully and slowly pull it out until it is fixed. Broadcast wave and service area The radio wave received via Mobacas differs from that of received via Xi/FOMA service and 1Seg/terrestrial digital broadcasting (Full seg).
･ TV/Mobacas antenna can be turned 360 degrees. Turn it toward good signal condition. ❖Information ･ Note the following when you operate TV/Mobacas antenna. - For changing the direction of TV/Mobacas antenna, hold around the root of TV/Mobacas antenna and ensure the direction. - For stowing the TV/Mobacas antenna, shorten the TV/Mobacas antenna, stand it right and check the direction of the top end. Improving signal reception Fully extend the TV/Mobacas antenna when using.
Searching for a program/ content Searching from program table (Real Time) 1 2 From the Home screen, [NOTTV]. [ 番組表 (Program guide)]. To display Shift Time program guide, tap [ シフトタイム (Shift Time)]. ･ Tap a current broadcasting program to switch to a watching screen of selected program. ･ Reserving a program/content Reserving Shift Time reception 1 2 3 From the Home screen, [NOTTV]. u[ 検索・ジャンル別 (Search/By category)]. Enter a keyword to search or tap a genre you want to search for.
Programs/contents may be automatically reserved even when you do not reserve ( 自動予約 (Automatic reservation)). ･ You can disable the automatic reservation. ･ Data may be complemented automatically using packet communication when contents are not completely received because of the reception status of broadcast wave etc. ( 自動補完 (Auto complement)). ･ You can disable the auto complement. ･ Reserving watching/recording Real Time programs 1 2 3 From the Home screen, [NOTTV].
自動予約 (Auto Set whether to reservation) automatically reserve time) recommended shift time programs. 自動補完 (Auto Set whether to complement) automatically complement data which are not completely received. 番組表 番組表情報自動 Set time for automatically acquiring (Program 取得 (Auto acquisition of programs table. table) program table) ステータス 放送中番組の表 Set whether to display information of バー (Status 示 (Show bar) program on programs on the air on the status bar.
詳細設定 Set whether to display telop for early earthquake report etc. Cookie Set Cookie to on/off. Cookie を削除 Delete saved Cookie. (Clear Cookie) 放送用保存領域 Delete received broadcast data in the 消去 (Delete saving area. saved broadcast data) データ放送表示 Enable/disable display (Display data of data broadcasting. broadcasting) Refresh shift time 再読込 display. (Reloading) 文字コード変換 Convert character codes used for shift (Character time.
Using Full seg/1Seg Airwaves Full seg and 1Seg are services provided by TV broadcasting enterprises (stations), etc. A communication fee for receiving video picture and sound is not required. Contact NHK for details on your NHK viewing fees. There are 2 types of information displayed in the data broadcasting area: "Data broadcasting" and "Data broadcasting site".
USB TV F connector conversion cable SO01 Use the supplied USB TV F connector conversion cable SO01 and commercially available TV antenna cable (F-type connector cable) to connect the terminal and a terrestrial digital broadcasting antenna for watching/recording Full seg with stable signal reception. ■ 1 Open the microUSB jack cover and insert the microUSB plug of the USB TV F connector conversion cable SO01 horizontally straight into the microUSB jack of the terminal.
f g h Watching TV 1 ■ From the Home screen, [TV]. ･ For the first activation, make channel settings according to the onscreen instructions (P.110). TV watching screen a b c g d Reception signal level Option menu Channel, broadcasting station and program information i Record icon j Channel selection key ･ Touch and hold / to search available channels. k Data broadcasting ･ For 1Seg programs, data broadcasting can be viewed only in the portrait screen.
To watch data broadcasting, call charge or packet communication charge is not required. If you use additional services of data broadcasting, etc. via packet communication, packet communication charge is applied. ･ Exiting TV 1 On the TV watching screen, x. ❖Information You cannot exit TV even if you tap y to return to the Home screen. If TV remains activated, the battery may be consumed quickly. ･ Setting TV You can set TV watching screen, data broadcasting and channel settings.
* Subtitle position can be set only in 1Seg landscape screen. 3 Tap a broadcasting station to change the remote control numberuTouch and hold an image. 4 Touch and hold a number of remote control you want to set to. 5 [YES]. Saving channels in the current location Available channels vary depending on the area (broadcasting service area) you are using in. 1 2 3 From the Home screen, [TV]. u[Change area]. Touch and hold an unregistered item.
3 Playing a recorded program Select a TV link. ･ When selecting a link content or HTML content, tap [Yes]. ❖Information Some TV links have period of validity. Out of date TV links are no longer available. ･ To delete TV link, in Step 3, touch and hold a TV link you want to deleteuTap [Delete]u[YES]. ･ Recording TV Record images, sound, captions or data broadcasting while displaying. 1 2 From the Home screen, [TV]. . ･ To quit recording, tap .
❖Information Alternatively, tap [From Program guide] in Step 4, you can reserve recording/watching. ･ Recording Full seg/1Seg is supported. ･ If you switch TV/Mobacas antenna and external antenna, or change areas after recording/watching reservation, recording/watching for the area when the reservation is set may not be available. FM radio ･ You can listen to the FM radio with the terminal. To use FM radio, use a commercially available earphone set or headphone. They work as antenna.
■ FM radio screen Camera abcde f k g l h i m j Take still pictures and record video clips. Shooting is available in the portrait and landscape screen. For shooting with Sweep Panorama, always hold the camera horizontally.
About the Copyright and Portrait rights Movies, still images, and sounds recorded on the terminal are prohibited by the copyright law from use without consent of the copyright holders, unless intended for personal use or any other purpose permitted by law. Also, using or transformation of other person's portrait or name without his or her permission may violate the portrait right. When you post recorded images etc. on the Internet web pages etc., make sure to be aware of the copyright and portrait right.
e f Auto focus frame Display area for status icons ･ Icons of set items such as Self-timer, Geotagging, etc. are displayed. g Thumbnail ･ Tap a thumbnail to open viewing/playback screen for still pictures/videos taken (P.125). h Shutter icon (still picture) i Start/stop recording icon (video) j Scene selection icons ･ When the capturing mode is set to "Superior auto", an icon for scene detected by the camera is displayed. When the fixation of camera or movement of object is detected, the icon appears.
Timeshift burst Select the best shot from continuous shot images before and after pressing the shutter. 61 still pictures in total are shot continuously for a second before and after pressing the shutter and all the still pictures are saved. A still picture selected from the thumbnails on the preview screen after shooting is used as cover image displayed in "Album" application. Social live by Bambuser Share experience with friends on Facebook in real-time.
If brightness, color balance, focus point of whole image, etc. to be shot with Sweep Panorama are extremely different from those of the focused image, image may not be shot properly. ･ In the following cases, Sweep Panorama shooting may be interrupted. - Moved the camera too fast/too slow - When image is too blurred - Moved the camera in the opposite direction of the shooting ･ Shooting still pictures Shooting with the shutter icon the Home screen, 1 From u[Camera]. .
3 4 uTap " " tabuTap in "Touch capture" or drag it right ux. Tap the video shooting screen to start/stop recording a video. ❖Information Recorded videos are automatically saved in the internal storage or a microSD card. ･ Do not cover the microphone with fingers etc. when recording videos. ･ When you connect a commercially available earphone set or other Bluetooth device, shooting start/stop sound may be softer. ･ While shooting a video, tap to shoot still pictures.
■ Resolution (only for still picture) ■ Set the resolution for photo. An image with a higher resolution requires more memory. ･ Even if the capturing mode is set to "Manual" with the resolution "8MP" (4:3), when "HDR" is ON or "Scene selection" is set to "Backlight correction HDR", the resolution turns to "7MP" (4:3). ･ When the capturing mode is set to"Superior auto", shoot in "7MP" (4:3)/ "5MP" (16:9), or when it is set to "AR effect", "Creative effect" or "Timeshift burst", shoot in "2MP" (16:9).
■ ISO (only for still picture) Set ISO sensitivity. ･ With ISO sensitivity up, you can shoot clear picture reducing blur even in a place where lightning is poor. However, noise stands out. ･ With ISO sensitivity down, you can shoot with noise kept low. However, it may be dim and tend to make blur in a place where lighting is poor. ■ Metering Measure the brightness on the shooting screen to determine a well-balanced exposure automatically.
■ Geotagging Set whether to tag still pictures/videos location information (geotag) for the shooting spot. ･ When enabled, location information is added when appears on the shooting screen. ･ appears while acquiring location information. To pictures shot while acquiring location information, geotags are not added. ■ Auto upload Set whether to upload shot still pictures/ videos to PlayMemories® Online automatically. ･ Depending on the server condition, it may not appear.
Night portrait Suitable for shooting persons against the nightscape background. Due to long exposure time, be careful not to shake camera. Night scene Shoot clear night scene. Due to long exposure time, be careful not to shake camera. Hand-held twilight Shoot a crisp and clear night scene reducing noise. High sensitivity Shoot brightly under poor lighting condition. Gourmet Shoot clear images making food look delicious. Pet Suitable for shooting pets. Beach Reconstruct beach scene brightly and vividly.
■ Shooting direction Set shooting direction for Sweep Panorama. Right Shoot moving the camera from left to right. Left Shoot moving the camera from right to left. Down Shoot moving the camera downwards. Up Shoot moving the camera upward. Using Quick launch Set operation when activating Camera by touching and holding on the lock screen and then dragging it to (Quick launch). ･ When the lock screen is set to "docomo" and the unlock method is set to "Swipe/Touch", appears instead of .
Shooting with Smile Shutter Shoot smile face. 1 2 3 4 5 From the Home screen, u[Camera]. u" " tab/" " tabu[Smile Shutter]/[Smile Shutter (video)]. Select smile level for the smile shutterux. Point the camera at the object. View/play photos or videos. Displaying photos/videos 1 ■ Detected faces are framed (up to 5 faces). ･ The camera selects which face to focus on. Face frame for focusing on turns to yellow (still picture)/blue (video).
❖Information ■ bc d e From the Home screen, [Album]uTap a photo/video. For Burst with longpress files, tap a photo. ･ For Timeshift burst files, tap the screenuTap to check all saved photos. ･ For video files, tap . ･ Tap the screen to display information such as shooting date, option menu icons, etc. Video playback screen (P.128) a Viewing a photo/video 1 Photo viewing screen ･ Depending on the number of saved images, it may take some times to load images.
Operating image files 1 From the Home screen, [Album]uTap a photo/video. 2 Tap a screen. Upload to online service, send via Bluetooth or mail, copy/move to microSD card. Play in slideshow, edit, register or check the detail information. When "Throw" is selected, files can be shared between DLNA device, Bluetooth device or screen mirroring compatible device and the terminal. YouTube YouTube is a free online video streaming service. You can play, search for and upload videos.
Media Player Play back music and videos stored on the internal storage or a microSD card using Media Player. ･ File formats of playable data (P.209) ■ Music playback screen a c d b d e f g h ❖Information For details on Media Player, from the Home screen, u[Media Player]u uTap [Help] to refer to the manual of Media Player. ･ Playing music/video 1 From the Home screen, u[Media Player].
■ Video playback screen Location services Your current location can be positioned using GPS, Wi-Fi, or mobile network. a b c d e fg h a b Video information Share a video between screen mirroring compatible device and the terminal c Back to video list d Auto-rotate screen ON/OFF ･ Tap to turn red and disable Auto-rotate screen. e Option menu f Operate a video g Playback point h Volume control ･ Alternatively, on the playback screen, press the volume key to adjust the volume.
You cannot use the terminal as a navigation device for an aircraft, vehicle, and person. Note that DOCOMO shall have no liabilities whatsoever even if you suffer damage or loss while performing a navigation using the location information. ･ You cannot use the terminal as a highaccuracy measurement GPS. Note that DOCOMO shall have no liabilities whatsoever even if you suffer damage or loss due to a deviation of the location information. ･ Global Positioning System (GPS) is created and managed by U.S.
Activating GPS/Location services You can position current location using GPS, Wi-Fi or information sent from base stations of mobile network. 1 2 3 From the Home screen, u[Settings]. [Location]uTap of "Location" or drag it right. Confirm the Attention and [Agree]uRead the Location consent and [Agree]. Finding the current location on the map You can detect your current location using location information service. ･ To detect current location, enable Location (P.130) beforehand.
Searching for a location 1 2 3 4 From the Home screen, u[Maps]. Fill out the search bar. on the software keyboard. Tap a destination. Schedule Displaying schedule 1 From the Home screen, u[Schedule]. ･ ジュール＆メモアプリ」ソフトウェア使 用許諾規約 ("Schedule & Memo Displaying information application" license agreement) screen, tap [ 同意する (Agree)]. Display information such as traffic information etc. on the map. 1 2 From the Home screen, u[Maps]. uSelect information to display.
❖Information ･ When an alarm of event is set, appears on the status bar at the set time. Drag the left part of the status baruTap [It's time] to display details of the event. ❖Information Tap [Free word search] in Step 3uEnter a search wordu[OK] to search and display the input information in [Input title], [Input text] and [ どこで？ (place)]. ･ Displaying events of Schedule 1 From the Home screen, u[Schedule]uDisplay scheduled date/time.
Stopping alarm 1 While alarm is sounding, drag to the right. ❖Information If you tap [Snooze], the alarm sounds again when the set time has passed. ･ Using World clock Using Stopwatch 1 2 3 Using Timer Display the date and time etc. in cities around the world. 1 From the Home screen, u[Alarm & clock]u" " tab. uSelect a city. 2 3 1 2 ❖Information Time display during day-light saving time may differ from time difference displayed on the screen when adding a city in Step 2.
Backing up/Restoring to/from Data Storage BOX docomo backup With docomo backup, you can back up or restore data to/from " データ保管 BOX (Data Storage BOX)" or "microSD card". ･ Do not remove microSD card during backup or restoring. Doing so may damage the terminal data. ･ If the battery is low, backup or restore may not be done. In that case, charge the terminal and retry to back up or restore. ･ docomo apps password is required to back up or restore (P.154).
･ Note that use of Periodical backup may cause high packet communication charge. Restoring 1 From the Home screen, u[docomo backup]u[Backup/ restore to docomo cloud]. 2 3 [Restore]. 5 Backing up If microSD card is not installed, data such as Tap [Select latest data] to select the latest data for each data type. [Overwrite]/[Add]u[Start restore] u[Restore]. Enter docomo apps passwordu [OK]. ❖Information ･ Back up or restore data such as phonebook entries, docomo mails, images/videos, etc.
Restoring 1 2 3 From the Home screen, u[docomo backup]u[Backup/ You can copy contacts data registered in restore to microSD card]. Google account to docomo account. [Restore]. From the Home screen, Tap [Select] on data type to restore 1 u[docomo backup]u[Backup/ uMark data to restoreu[Select]. restore to microSD]. ･ Tap [Select latest data] to select the latest data for each data type.
Settings Wi-Fi Viewing the setting menu 1 From the Home screen, u[Settings]. WIRELESS & NETWORKS DEVICE PERSONAL ACCOUNTS SYSTEM P.137 P.147 P.154 P.161 P.162 WIRELESS & NETWORKS Wi-Fi Bluetooth Data usage Xperia™ Connectivity More... Airplane mode Default SMS app NFC Android Beam Tethering & portable hotspot VPN Mobile networks P.137 P.169 P.140 P.141 P.142 P.86 P.171 P.144 P.146 P.143, P.
■ Reception interference caused by Bluetooth devices Bluetooth devices and wireless LAN (IEEE802.11b/g/n) devices use the same frequency band (2.4GHz). If you use Bluetooth devices near a wireless LAN device, reception interference may occur or the communications speed may lower. Also, you may hear noise or have a connection problem. Communication may be interrupted or sound may be lost while streaming data, etc.
Deleting connecting Wi-Fi network setting 1 2 3 From the Home screen, u[Settings]u[Wi-Fi]. Tap the Wi-Fi network that is currently connected. [Forget]. Using optional menu 1 From the Home screen, u[Settings]u[Wi-Fi]u Scan WPS PIN Entry Wi-Fi Direct Advanced Network notification Adding a Wi-Fi network manually ･ Turn Wi-Fi on beforehand (P.138). 1 2 3 From the Home screen, u[Settings]u[Wi-Fi]. uEnter a network SSID of the Wi-Fi network you want to add.
Advanced Wi-Fi optimization Set wether to control the battery power consumption when WiFi is on. Auto IP support Enable/disable Auto IP function. Passpoint Set whether to connect to available Passpoint network automatically. Passpoint Set Passpoint network. networks MAC address Check MAC address. IP address Check IP address. Using Wi-Fi Direct compatible device You can connect among the devices compatible with Wi-Fi Direct via Wi-Fi even without configuring access point. ･ Turn Wi-Fi on beforehand (P.
･ Change the setting value for data usage limit and the value for alert by dragging the right end of each bar in the graph. Setting Data usage cycle 1 2 From the Home screen, u[Settings]u[Data usage]. Tap "Data usage cycle" setting itemuSet period/[Change cycle...]. ･ When you tap [Change cycle...], select reset dateu[Set]. * You need to set your online service account (Google account, Facebook account, etc.) in the terminal to synchronize in advance.
Windows tethering DUALSHOCK™3 wireless controller Start MirrorLink™ USB Connectivity Display the description about Windows tethering. To connect by Windows tethering, set the following beforehand. ･ Turn on Bluetooth function of the terminal and the PC (P.169). ･ Set security of Portable Wi-Fi hotspot to "WPA2 PSK" (P.145). ･ Pair the terminal and a PC whose OS is Windows 8.1 or later via Bluetooth (P.170).
Setting an access point An access point for connecting to the Internet (sp-mode) is already registered. You can add or change it if necessary. For using mopera U, Business mopera Internet add the access point manually. For details on mopera U, refer to mopera U website. Checking the access point in use 1 From the Home screen, u[Settings]u[More...]u[Mobile networks]u[Access Point Names]. ･ It is recommended that you use the displayed access point without editing.
sp-mode sp-mode is ISP for NTT DOCOMO smartphone. In addition to accessing Internet, you can use the mail service using the same address as i-mode mail (@docomo.ne.jp), etc. sp-mode is a service requiring subscription. For details on spmode, refer to NTT DOCOMO website. Setting USB tethering 1 2 When you connect microUSB cable etc. for the first time, the driver software for the terminal is installed to a PC. Wait for a while until installation is completed.
Setting Wi-Fi tethering 1 2 3 From the Home screen, u[Settings]u[More...]u [Tethering & portable hotspot]. [Portable Wi-Fi hotspot]. Confirm "Details"u[OK]. ❖Information If Wi-Fi tethering starts while connecting to Wi-Fi network or the terminal and DLNA device are connected via Wi-Fi network, Wi-Fi network is disconnected. Wi-Fi network is automatically connected when Wi-Fi tethering ends. ･ Wi-Fi tethering can be used with USB tethering or Bluetooth tethering at the same time.
Connecting to a VPN (Virtual Private Network) ❖Information ･ To edit/delete VPNs, touch and hold a VPNu[Edit profile]/[Delete profile]. Use Virtual Private Network (VPN) to connect to the information in a protected local network such as companies, schools or other facilities from outside. Connecting to a VPN ❖Information 2 3 ･ ･ If you set sp-mode as an ISP, you cannot use PPTP.
Manage notifications DEVICE Personalization Home Call settings Sound Display Storage Power management Apps Status bar icons P.147 P.147 P.78, P.186 P.148 P.149 P.151 P.152 Changing wallpaper of the lock screen P.152 1 ･ You can change the wallpaper when "Set all to" or "Lock screen" in Preferred apps settings (P.147) is set to "Xperia™".
Dial pad touch tones Sound Sound effects ClearAudio+ The sound setting for music recommended by Sonny. It helps optimize the settings for digital signal processing technology with a onetouch operation. Set sound effects. Sound enhancements Dynamic Set to play at a normalizer comparable volume when songs with different volume levels are played at random. Audio accessories Set input/output device to connect.
❖Information Even if alarm volume is set in Volumes, set in "Alarm & clock" app is given priority (P.132). ･ Press Volume key when the Home screen is displayed to adjust the volume for ringtone. Press Volume key while receiving a call to mute the ringtone. ･ Setting a ringtone/notification sound 1 From the Home screen, u[Settings]u[Sound]u[Phone ringtone]/[Notification sound]. 2 Select Phone ringtone or Notification soundu[Done].
* Image quality improving procedure for still pictures is effective only for viewing in "Album" application. Adjusting the screen brightness 1 2 From the Home screen, u[Settings]u[Display]u [Brightness]. Drag the slider to the right or left. Setting screen-saver Set to activate screen-saver while charging when the backlight of the screen turns off automatically while charging according to the setting of "Sleep" (P.149) in Display setting.
Storage Check or format memory volume of device memory (internal storage), microSD card, and USB storage. DEVICE MEMORY Total space Check available memory space of internal storage, etc. SD CARD Total space Check available memory space etc. of microSD card. Unmount Cancel connection of SD card*1 microSD card to remove it safely. Mount SD Have microSD card card*1 recognized. Erase SD Format microSD card. card*1 EXTERNAL Total space Check available USB STORAGE memory space of USB storage.
Power management STAMINA mode Restrict functions in sleep mode for specified applications to reduce battery consumption. Low battery mode Set time before going into sleep mode, screen brightness, and whether to turn off functions when the battery level becomes lower than set level. Location-based When entering to the registered Wi-Fi Wi-Fi network area, the terminal connects the Wi-Fi network automatically to reduce the battery power consumption.
Deleting application data or application ･ Before deleting application data, back up contents that you want to save including data saved in the application. 1 2 From the Home screen, u[Settings]u[Apps]. Tap an application to delete. To delete application data, tap [Clear data]uRead the note and tap [OK]. ･ To delete application, tap [Uninstall]u[OK]. ･ ❖Information Some applications pre-installed cannot be deleted (uninstalled).
Send device error information PERSONAL docomo service/cloud Location Security Language & input Backup & reset Setup guide P.154 P.155 P.155 P.159 P.160 P.38 docomo service/cloud Set docomo ID for using docomo ID 設定 (docomo ID setting) docomo applications. docomo cloud Make settings for docomo cloud compatible service. Application Manage to install applications manager provided by NTT DOCOMO and set to check updates for applications regularly.
Location Location Mode RECENT LOCATION REQUESTS LOCATION SERVICES Security P.130 Set a mode to identify location information. Display the application using the recent location information data and battery usage amount. Set wether to allow applications to access the location information. Screen lock P.158 Improve face Improve face unlock accuracy. matching*1 Liveness check*1 Set whether to require blinking for unlocking by Face Unlock.
Unknown sources Set wether to permit installing before downloading unknown sources application. Some applications may be of unknown origin. To protect the terminal and personal data, only download applications from trusted sources. Verify apps Set whether to prohibit installation of possibly harmful applications or to warn before installation. Storage type Show type of credential storage. Trusted Display trusted CA credentials. credentials Install from Install encrypted certificates.
･ ■ The PUK code is written on the subscription form (copy for customer) handed at the subscription in the docomo Shop. If you subscribed other than docomo Shop, you must bring your official identification (such as drivers license), the docomo mini UIM card with you to the nearest docomo Shop or contact the "General Inquiries" on the last page. ■ PIN code You can set security code which named PIN code to docomo mini UIM card. It is set "0000" at the subscription. They can be changed by yourself.
Enabling SIM card lock Unlocking PIN lock By entering PIN code when powered on, you can protect from improper use. 1 2 3 1 2 Enter the PUK codeu . Enter a new PIN codeu . Enter the new PIN code again u . From the Home screen, u[Settings]u[Security]u[Set up SIM card lock]u[Lock SIM card]. Enter PIN codeu[OK].
Locking the screen When P is pressed to turn on the sleep mode or the screen backlight automatically goes off after screen unlock method (P.158) is set, the screen is locked. ･ To cancel the screen lock, press P to turn the backlight onuEnter unlock method on the screen. ･ To cancel screen lock pattern after you set, from the Home screen, u[Settings]u[Security]u[Screen lock]uEnter the current unlock pattern/PIN/ passwordu[None].
Setting Voice Search Language Speech output Block offensive words Offline speech recognition Personalized recognition* Bluetooth headset Select language used for Google voice search. Set voice output. Set whether to display recognized offensive voice results. Download/manage voice recognition data for offline use. Set whether to enhance voice recognition. Set whether to record voice sound with Bluetooth headset. * It may not appear.
1 From the Home screen, u[Settings]u[Backup & reset]u [Factory data reset]u[Reset tablet]. ･ 2 Mark "Erase internal storage" to delete all contents (music, photos, etc.) on the internal storage. Contents in preinstalled applications such as “Album”, “Movies”, etc. are deleted. However, some contents can be downloaded from Sony Select. [Erase everything]. Setting Google account You can set a Google account on your terminal and use Google services such as Gmail, Google Play, etc.
Setting other account 1 2 From the Home screen, u[Settings]u[Add account]. Tap an account type. ･ After this step, follow the onscreen instructions. SYSTEM Date & time Accessibility Printing About tablet ❖Information ･ Use docomo account when you use "docomo backup" app (P.134) provided by NTT DOCOMO. docomo account is set by default. Date & time ･ Removing account 1 From the Home screen, u[Settings]uSelect an account typeuSelect an account you want to delete.
Accessibility TalkBack Set user support service (TalkBack). Captions Set whether to display captions or set language, font size, etc. for captions. Magnification Set whether to zoom in/out by gestures tapping the screen 3 times. Large text Set whether to use large text. Power button ends Set whether to end a call by call*1 pressing P. Auto-rotate screen P.41 Speak passwords Set whether to read out passwords. Accessibility Set wether to activate the shortcut*2 accessibility function. Text-to-speech P.
About tablet Software Update Upgrade Android software Application update Status Legal information Model number Android version Baseband version Kernel version Build number P.199 P.203 Download new applications or update applications. Check own phone number, battery status, remaining battery, battery performance, etc. Check open source license or Google terms of use, etc. Check versions and numbers etc.
File management Storage structure Phone (internal storage) Folders in the internal storage by default are as follows. ･ Displayed folders may differ depending on the terminal operations. Alarms Android DCIM Download Movies Music Notifications Pictures Podcasts recovery Ringtones Stores alarm sound etc. Stores setting data for system or each application, temporary files, etc. Stores still pictures/videos shot by Camera. Stores downloaded data through Browser.
Inserting microSD card ･ Opening/closing microSD card slot cover (P.24) 1 Open microSD card slot cover and check the orientation of the microSD card, then slowly insert it straight until it clicks. ･ 2 Close microSD card slot cover and press part firmly to check that no gap exists between the terminal and the cover. Insert the microSD card with metal contacts side down.
Removing microSD card Make sure to unmount microSD card (make reading/writing unavailable) before removing. ･ Opening/closing microSD card slot cover (P.24) 1 From the Home screen, u[Settings]u[Storage]u [Unmount SD card]u[OK]. ･ 2 When microSD card is unmounted, " SD card safe to remove" appears in the status bar and notify that microSD card is not available for reading or writing. Open microSD slot cover and push microSD card to the end until it clicks. Then remove microSD card slowly.
4 Enter a folder nameu[OK]. Moving/Copying folder or file Renaming folder or file u[File 1 From the Home screen, Commander]. 2 Select an itemuTap a folder as required. Touch and hold a folder or file you want to renameu[Rename]. Enter a folder name or file nameu[OK]. 3 4 u[File 1 From the Home screen, Commander]. 2 Select an itemuTap a folder as required. Mark a folder or file you want to delete. 4 From the Home screen, Commander]. 2 Select an itemuTap a folder as required.
･ Data communication Bluetooth function Bluetooth function is a technology which enables to connect with Bluetooth device such as PC, handsfree headset wirelessly. ･ The terminal does not communicate wirelessly with all types of Bluetooth devices. ･ Supported Bluetooth profiles (P.208) ❖Information If you turn off the terminal with Bluetooth turned on, Bluetooth function turns off. When you turn on the terminal again, Bluetooth function turns on automatically.
Making pair setting for the terminal and Bluetooth device To connect the terminal and Bluetooth device, pair them first. ･ Once paired, the setting with the Bluetooth device is saved. ･ For make pair setting, entering passcode (PIN) may be required. Passcode (PIN) of the terminal is "0000". If you cannot make pair setting when you enter "0000", see the documentation of your Bluetooth device. 1 From the Home screen, u [Settings]u[Bluetooth]u[Search for devices].
Disconnecting a Bluetooth device 1 2 3 From the Home screen, u[Settings]u[Bluetooth]. Tap the connected Bluetooth device name. [OK]. ･ To reconnect, tap the Bluetooth device name. Sending data via Bluetooth function 1 "Bluetooth" from the sharing menu of each application. 2 Tap the other party's Bluetooth device.
Hold the mark (NFC antenna section) over the device at the center horizontally. If scanning fails even with it held in front of the center of the scanner, slightly lift up the terminal, or move it backwards/forwards or to the left/right. ･ If there are metal objects between mark (NFC antenna section) and the other device, scanning may fail. Putting the terminal into a case or cover may affect communication. In that case, remove the case or cover. ･ To send/receive data, enable NFC function in advance (P.
Sending data 1 Make sure that the NFC function is enabled. 2 3 Display data to send on the screen. Face the marks (NFC antenna section) on the terminal and the receiver's terminal each other. ･ 4 "Touch to beam" appears. Tap the screen that has become small. Receiving data 1 2 Make sure that the NFC function is enabled. Face the marks (NFC antenna section) on the terminal and the receiver's terminal each other. ･ When you receive data, appears on the status bar.
■ Media transfer mode (MTP) External device connection Connecting to PC The terminal is displayed on the PC screen as a portable device and you can access the internal storage and a microSD card in the terminal. Connecting to a PC with microUSB cable By connecting the terminal and a PC with the Micro USB Cable 01 (optional), etc., you can copy, move, delete data, etc. ･ You may not be able to operate copyrighted data of images, music, etc.
Disconnecting the microUSB cable safely ･ Do not disconnect the microUSB cable during data transferring. Data may be damaged. ■ 1 ■ 1 2 3 Media transfer mode (MTP) Confirm that it is not transferring data, disconnect the microUSB cable. Mass storage mode (MSC) Drag the left part of the status bar downwards. [SD card connected]. Disconnect the microUSB cable.
Pairing with a PC within a Wi-Fi network 1 Connect a PC you want pair to a Wi-Fi network. 2 Connect the terminal to the Wi-Fi network that the PC is connected (P.138). 3 Connect the terminal to a PC using a microUSB cable. ･ 4 5 6 Connecting the terminal to a PC within the Wi-Fi network 1 From the Home screen, u[Settings]u[Xperia™ Connectivity]u[USB Connectivity] u"Host name" (PC name) in the "WIRELESS MEDIA TRANSFER" field. 2 [Connect].
Connecting DLNA device Using Wi-Fi function, you can share media files with other client (DLNA : Digital Living Network Alliance) devices. ･ Set Wi-Fi connection (P.137) with a DLNA device in advance. Playing media files in the DLNA device with the terminal Play media files in the DLNA device on the terminal. 1 From the Home screen, tap any of [Album]/[WALKMAN]. ･ Setting Media server 1 From the Home screen, u [Settings]u[Xperia™ Connectivity]u[Media server settings].
Playing a media file in the terminal with a DLNA device You can play a media file in the terminal with a DLNA device using Throw function. 1 From the Home screen, tap any of [Album]/[WALKMAN]. ･ 2 3 To play a file in "Movies", from the Home screen, u[Movies]. Tap a file you want to playu u [Throw]. Tap a device on the device list. Connecting to other devices Connecting a TV This terminal supports MHL connection.
❖Information ･ ･ ･ ･ ･ ･ Removing the MHL cable from the terminal severs connection, however, TV may remain to MHL input mode or HDMI input mode. Follow the instructions on the TV to switch to digital terrestrial television mode, etc. When MHL is connected, radio wave condition may be affected according to your environment for the usage. When you do not use MHL connection, remove the MHL cable or HDMI adapter and cancel MHL connection.
International roaming Overview of International roaming (WORLD WING) With the international roaming (WORLD WING), you can use the terminal without changing phone number or mail address in the service area of the overseas network operator affiliated with DOCOMO. You do not need to change the settings of call and SMS. ■ Supporting networks The terminal is Class 5. The terminal works in LTE network, 3G network and GSM/GPRS network service area.
Checking before overseas use Before leaving Japan To use the terminal overseas, check the following in Japan. ■ Subscription ･ ■ Charging ･ ■ Check if you subscribe WORLD WING. For details, contact "General Inquiries" on the last page. For AC adapter for charging overseas travel, use optional "AC Adapter 04" or "AC Adapter 05".
After arriving overseas Setting a network operator From the Settings screen, u[Settings]u[More...]u[Mobile networks]u[Service providers]. When you arrive overseas and turn on the terminal, an available network is automatically set. 1 Connectivity 2 [Search mode]u[Manual]. 3 From "AVAILABLE NETWORKS", mark a network to use. When you have set "Search mode" of "Service providers" in "Mobile networks" to "Automatic", optimized network is automatically selected (P.182).
Display About inquiries During international roaming, appears on the status bar. ･ You can confirm the name of the connected network operator on the Notification panel. ･ ❖Note ･ While appears on the status bar, packet communication is available. Note that packet communication charge may become high.
Making a call to outside country you stay (including Japan) You can make a call from overseas using the international roaming service. ･ You can easily make international calls from the country you stay to Japan or to other countries by entering prefix "+" and then the country code and phone number. u"Dial" 1 From the Home screen, tab. 2 Dial + (touch and hold [0])uEnter Country code, Area code (City code), a phone number in the order. If the area code begins with "0", omit "0".
Making a call to WORLD WING user overseas Making a call from the other party ■ When the other party uses international roaming service, make a call as an international call to Japan even when you stay in the same country as the other party. Receiving a call in the country you stay You can receive a call using the international roaming service. 1 While receiving a call, drag (left) to (right). 2 When the call is finished, tap [End call].
International roaming settings Make settings for using international roaming or international calls. ･ For some overseas network operators, settings may not be made. 1 2 From the Home, u . [Call settings]u[Roaming settings]. Restricting incoming calls Incoming notification on roaming Roaming guidance International dial assist Network service Set whether to restrict incoming calls during international roaming. Set whether to notify with SMS if you cannot receive calls because of out of service etc.
2 [Call settings]u[Roaming settings]. 3 [Network service]uSelect a target service. Remote operation (charged) Caller ID request (charged) Incoming call notific. (charged) Roaming guidance (charged) Voicemail (charged) Call forwarding (charged) 4 Set whether to start Remote operation. Set whether to start Caller ID display request service. Set whether to start Incoming notification on roaming. After returning to Japan When you return to Japan, the terminal is connected to DOCOMO network automatically.
Appendix/Index Troubleshooting Troubleshooting First, check if the software update is necessary for the terminal. If necessary, perform the software update (P.199, P.206). ･ When checking the following items not to improve the state, contact the phone number given in "Repairs" the last page of this manual (in Japanese only) or DOCOMO-specified repair office. ･ ■ Power supply Cannot power on the terminal. ･ Check if the battery is not run out. → P.32 Screen is frozen, the power cannot be turned off.
Use the desktop holder for charging the battery while watching Full seg or Mobacas. The notification LED blinks in red and the terminal cannot be operated. ･ When the battery level is low, charge the battery. → P.32 ･ ■ Terminal operation Become hot while operating/charging. ･ While calling, depending on the radio wave condition or call duration time, periphery of the speaker may become hot. This condition is not abnormal. ･ While operating or charging, or if you watch TV, record video, etc.
The clock is not on time. ･ The clock time may become wrong when the power is turned on for a long time. Check if "Automatic date & time" and "Automatic time zone" are marked and turn the power off and on in a place with strong radio wave conditions. → P.162 The terminal operation is unstable. ･ Instability may be caused by applications that you installed after purchasing the terminal.
Cannot call (Even when moving, does not disappear, or although radio waves are enough, making/receiving calls is unavailable.) ･ Turn the power OFF and ON, or remove and attach docomo mini UIM card. → P.30, P.36 ･ Due to the nature of radio waves, making/ receiving calls may be unavailable even when "not out of service area" or " appears on the display for the radio wave condition". Move to the other place and call again. ･ Check if you set call rejection. → P.78, P.
■ Camera Still pictures and video taken with the camera are blurred. ･ Check if clouds, dirt or film attach to the lens of camera. ･ Use "Superior auto" for the capturing mode. → P.115 ･ When the capturing mode is set to "Manual", you can focus on using Focus mode. → P.119 ･ Set Image stabilizer/SteadyShot™ and shoot. → P.120 ･ To shoot a portrait image, use "Face detection". → P.123 ■ TV Unable to watching Full seg/1Seg.
The terminal suddenly became unavailable while using overseas. ･ Check if usage amount exceeds the limit of maximum charges for use. For use of "International roaming (WORLD WING)", the limit of maximum charges for use is set in advance. If exceeding the limit of maximum charges for use, pay the charges. Cannot receive calls overseas. ･ Is "Restricting incoming calls" set to "Activate restriction"? → P.
Calls cannot be made from the terminal connecting to external device such as car navigation or handsfree device. ･ If calls are made several times when the other party does not answer or is out of service, the call to this number may be disabled. In this case, turn terminal off and on. ■ Map/GPS Cannot set AUTO-GPS service information. ･ Check if the battery level is low and AUTOGPS function stops. If AUTO-GPS stops due to "Low-power operation settings", AUTO-GPS service information cannot be set.
● Calls are restricted by access control Appears when normal/emergency voice call service is hard to receive because communication lines are busy. ● Restricted access changed Appears when the voice service or data service is not received. ● SIM card is locked Enter your PIN code (P.157) correctly. ● SIM card is PUK-locked Enter your PUK (Personal Unblocking Key) (P.157) correctly. ● PIN lock disable code is locked. PIN lock disable code is locked. Please contact a docomo Shop.
2 From the Home screen, ･ 3 4 5 u[ 遠隔サ Warranty and After Sales Services ポート (Remote support)]. When you use for the first time, agree to " ソフトウェア使用許諾書 (License Agreement)". [ 遠隔サポートの接続画面に進む (Go to Remote support connection screen)]u[ 同意する (Agree)]. Enter connection number notified by DOCOMO. Remote support starts when you are connected. Warranty Make sure that the warranty is received with the terminal upon purchase.
When requesting a repair, make sure to bring the warranty card with the terminal. Repair requests that are not accompanied by the warranty or that involve malfunction and damage due to incorrect handling by the owner (damage of liquid crystal, connector, etc.) will only be repaired at the owner's expense, even if the warranty period is still effective.
■ Parts stock period The functional parts necessary to repair the terminal will be basically available for a minimum of 4 years after the manufacture is discontinued. However, depending on the defective portion, repair may not be possible because of a shortage of repair parts. Note that repair may still be possible depending on the defective portion even if the stock period has expired. Contact "Repairs" on the last page (in Japanese only). Precautions ● Never modify the terminal or accessories.
Precautions on memory dial (Phonebook function) and downloaded data Note that data you created or data you retrieved or downloaded from sources other than your terminal may be changed or lost when you change the model or have repairs done to the terminal. DOCOMO shall have no liability for any change or loss of any kind. Under some circumstances, DOCOMO may replace your terminal with its equivalent instead of repairing it.
Using software update Software update should be done with battery fully charged. You are recommended to connect charging cable when updating software. ･ Software cannot be updated in the following cases.
Updating software automatically 2 Update file is automatically downloaded and software is updated at the specified time. Setting Software update ･ The settings of Software Update is set to "Automatic Update" by default. 1 2 3 From the Home screen, u[Settings]u[About tablet]u [Software Update]. [Configure the software update]. [Automatic Update]/[Manual Update]. When software update is necessary If the update file is downloaded automatically, appears on the status bar.
2 3 [Start the software update]u[Yes]. ･ For activating from Software update notice screen, display the Software update notice screenu[Start update]. After a message for rewriting start appears, rewriting starts automatically in approximately 10 seconds. Tap [OK] to start rewriting automatically. ･ While updating the software, all key operations become disabled. Also, updating cannot be canceled. ･ When the software update is complete, the terminal restarts and the Home screen is displayed.
If (Software update was suspended Please check the remaining internal storage capacity and retry.) appears on the status bar during software update, make sure that sufficient memory remains on the phone memory and retry to update. ･ If (Software update was suspended Please check the status of the handset and retry.) appears on the status bar during software update, make sure that the terminal is not in the following states and retry to update.
Notes When Upgrade Android software is performed, restoring the previous Android software is not possible. ･ Upgrade Android software with the battery fully charged. ･ For Upgrade Android software, docomo mini UIM card is needed. For using packet communication, subscription to sp-mode is required. ･ Exit from all applications before upgrading Android software. Activating applications while upgrading may interrupt Upgrade Android software. ･ Do not turn off the terminal while upgrading.
"Not now" : End Upgrade Android software without upgrading software. *1 When "Download" for update file is selected When downloading the update files is complete, installing to the terminal is available. ･ Install now : Immediately install the update file ･ Install later : Install the update file at reserved time. To change the start time, from the Home screen, u[Settings]u[About tablet]u[Upgrade Android software], then change start time.
When "Perform at scheduled time (via Wi-Fi/Xi)" is selected, time for downloading is automatically set. Start time cannot be changed. If you do not want to download at the automatically-set time, tap [Upgrade Android software]u[Cancel] to cancel the reservation of downloading. To download update files, from the Home screen, u[Settings]u[About tablet]u[Upgrade Android software]u[Start upgrading], then select "Perform now (only via Wi-Fi)".
Main specification ■ Charging time The terminal Product name Size Weight Internal memory External memory compatible Continuous FOMA/3G stand-by time GSM LTE Continuous FOMA/3G call GSM time SO-05G Approx. 172 mm (H)u approx. 266 mm (W)u approx. 6.4 mm (T) (thickest part approx. 6.7 mm) Approx. 439 g ROM : 32 GB RAM : 3 GB microSD card of up to 2GB microSDHC card of up to 32GB microSDXC card of up to 128GB (as of June, 2014) Stationary (Auto) : Approx. 1,100 hours Stationary (Auto) : Approx.
Camera effective pixels Camera recorded pixels (Max.) Zoom Still picture recording size Video recording size Frame rate Camera : Approx. 8,100,000 pixels Front camera : Approx. 2,200,000 pixels Camera : Approx. 8,000,000 pixels Front camera : Approx. 2,100,000 pixels Camera : (Still picture) Max. approx. 8.0x (41 levels), (Video) Max. approx. 8.
Continuous stand-by time is an estimate of the stand-by time when radio signal reception is normal. Stationary continuous stand-by time is the estimated average operation time when radio signal reception is normal. In certain circumstances, the stand-by time may drop to as low as half the time shown due to the battery charge, function settings, temperature, or radio signal reception in the area (no reception or weak).
■ File format (document) Files of the following versions/extensions can be viewed on the terminal. Type Microsoft Word Microsoft Excel Microsoft PowerPoint PDF Version/Extension Microsoft Word 97 - 2010/.doc, .docx, .rtf, .txt, .log, .docm Microsoft Excel 97 - 2010/.xls, .xlsx, .csv, .xlsm Microsoft PowerPoint 97 - 2010/.ppt, .pps, .pptx, .ppsx, .pptm Ver1.4 - 1.7/.pdf * Some files may not be viewed properly due to corrupted layouts.
(Honduras)/Spanish (Mexico)/Spanish (Nicaragua)/Spanish (Panama)/Spanish (Paraguay)/Spanish (Peru)/Spanish (Puerto Rico)/Spanish (Dominican Republic)/ Spanish (Uruguay )/Spanish (Venezuela)/ Basque/French (Belgique)/French (Canada)/French (France)/French (Switzerland)/Galician/Croatian/Icelandic/ Italian (Italy)/Italian (Switzerland)/Javanese/ Latvian/Lithuanian/Hungarian/Dutch (Belgium)/Dutch (Netherlands)/ Norwegian/Polish/Portuguese (Brazil)/ Portuguese (Portugal)/Romanian/Albanian/ Slovak/Slovene/Serbia
Arabic (Bahrain)/Arabic (Oman)/Arabic (Palestine)/Chinese, standard (Taiwan, Traditional)/Chinese, standard (China, Simplified)/Chinese, standard (Hong Kong, Simplified)/Chinese, Cantonese (Hong Kong Traditional)/Korean Certificate and compliance You can check details of certificate and compliance mark specific to the terminal (including certificate number/compliance number). 1 2 From the Home screen, u [Settings]. [About tablet]u[Legal information]u[Certificates].
Sony Mobile and its third party suppliers and licensors retain all rights, title and interest in and to the Software. To the extent that the Software contains material or code of a third party, such third parties shall be beneficiaries of these terms. This licence is governed by the laws of Sweden. When applicable, the foregoing applies to statutory consumer rights.
Intellectual Property Right About the Copyright and Portrait rights Copyrighted contents you recorded or obtained from sites or Internet home pages using this product by downloading or other means, such as documents, images, music data, software, are prohibited from reproduction, transformation and transmission over public lines without consent of the copyright holders, unless intended for personal use or any other purpose permitted by law.
Rovi, G-GUIDE, G-GUIDE MOBILE and their logos are trademarks or registered trademarks in Japan of U.S. Rovi Corporation and/or its affiliates. ･ " モバキャス " is a trademark of Japan Mobilecasting, Inc. ･ "NOTTV" and "NOTTV" logo are trademarks of mmbi, Inc. ･ Xperia, TrackID, Socialife and Xperia Lounge are trademarks or registered trademarks of Sony Mobile Communications AB. ･ PlayStation, and DUALSHOCK are trademarks or registered trademarks or Sony Computer Entertainment Inc.
MHL, Mobile High-Definition Link and MHL logo are trademarks or registered trademarks of MHL, LLC. ･ HDMI, HDMI logo and HighDefinition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ･ MirrorLink and MirrorLink logo are trademarks or registered trademarks of Car Connectivity Consortium LLC. ･ Linux is a registered trademark of Linus Torvalds,individual.
to promotional, internal and commercial uses and licensing may be obtained MPEG LA, L.L.C. (See http://www.mpegla.com ). MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson. ･ This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/) ･ Other product and company names mentioned herein may be the trademarks of their respective owners. In context, TM and ® mark are omitted.
Index A About tablet ･････････････････････････ 164 Access point Initializing ･････････････････････････ 143 Setting････････････････････････････ 143 Accessibility ･････････････････････････ 163 Account Removing ･････････････････････････ 162 Setting････････････････････････････ 161 ACCOUNTS ･･････････････････････････ 161 Adjusting sound volume ･･･････････････ 148 Airplane mode ･･･････････････････････ 142 Alarm & clock ････････････････････････ 132 Setting alarm ･･････････････････････ 132 Album ･･･････････････････
Brightness ･･･････････････････････････ 150 Browser ･･････････････････････････････ 94 Adding tab ･････････････････････････ 95 Bookmark ･･････････････････････････ 96 History ･････････････････････････････ 96 Incognito tab ･･･････････････････････ 95 Link ･･･････････････････････････････ 96 Searching text･･･････････････････････ 95 Settings ････････････････････････････ 96 C Calculator ････････････････････････････ 54 Calendar ･････････････････････････････ 53 Call･･････････････････････････････････ 72 Calling screen
D d hits ････････････････････････････････ 55 Data storage BOX ･･････････････････････ 55 Data usage ･･････････････････････････ 140 Date & time ･･････････････････････････ 162 Daydream ･･･････････････････････････ 150 DEVICE･･････････････････････････････ 147 Dial ･････････････････････････････････ 52 Disaster kit ･･･････････････････････････ 56 Display･･････････････････････････････ 149 dmarket･･････････････････････････････ 97 dmenu ･･･････････････････････････････ 97 docomo apps password ････････････････ 154 docom
Hangouts ････････････････････････････ 54 HDMI ･･･････････････････････････････ 178 Home･･･････････････････････････････ 147 Home application docomo ････････････････････････････ 66 Switching ･･････････････････････････ 59 Xperia ･････････････････････････････ 47 Home screen ･･････････････････････････ 47 Adding (docomo LIVE UX) ･････････････ 68 Adding (Xperia Home) ･････････････ 47, 48 Deleting (docomo LIVE UX) ････････････ 68 Deleting (Xperia Home) ･･･････････････ 47 docomo LIVE UX ･････････････････････ 66 Folde
Mobacas ･････････････････････････････ 99 Reserving ･････････････････････････ 102 Searching ･････････････････････････ 102 Settings ･･･････････････････････････ 103 TV/Mobacas antenna ････････････････ 100 Watching ･･････････････････････････ 101 Moji-Henshu ･･････････････････････････ 65 Movies ･･･････････････････････････････ 53 My Magazine ･････････････････････････ 70 Display category setting ･･････････････ 71 My profile Editing ･････････････････････････････ 83 Phonebook ･････････････････････････ 80 My Words ･･
Portrait view ･･････････････････････････ 41 Power management ･･･････････････････ 152 Printing ･････････････････････････････ 163 Public mode (power OFF) setting ･････････ 79 Q Quick settings ･････････････････････････ 46 QWERTY ･････････････････････････････ 62 R Recent calls screen ･････････････････････ 76 Recording videos ･････････････････････ 117 Reject call with message ････････････････ 75 Remote control ････････････････････････ 53 Remote operation settings ･･････････････ 79 Remote support ･･････････････
T U Task manager ･････････････････････････ 57 Tethering ････････････････････････････ 144 Bluetooth tethering ･････････････････ 145 USB tethering ･･････････････････････ 144 Wi-Fi tethering ･････････････････････ 145 Text editing ･･･････････････････････････ 64 Theme Home screen ････････････････････････ 49 Timer ･･･････････････････････････････ 133 ToruCa ･･･････････････････････････････ 99 Touch screen ･･････････････････････････ 39 Drag･･･････････････････････････････ 40 Flick ･･･････････････････････････････ 40
Xperia Connectivity ･･･････････････････ 141 Xperia Japanese keyboard ･･･････････････ 60 Help & Tips ･････････････････････････ 60 Xperia Lounge Japan ･･･････････････････ 53 X-Reality for mobile ･･･････････････････ 149 Y YouTube ････････････････････････････ 126 Numerics 1Seg ･･･････････････････････････････ 105 Appendix/Index 225
Make various applications or change your billing plan, check your charges and points, and more online. sp-mode: dmenu ⇒ " お客様サポート (Customer support)" ⇒ " ドコモオンライン手続きの一覧をみる (See list of docomo online procedures)" (Packet communication free) (In Japanese only) PC: My docomo (https://www.nttdocomo.co.jp/mydocomo/ ) ⇒ ドコモオンライン手続き一覧 (List of docomo online procedures) (In Japanese only) * When using with sp-mode, "Network security code" is required. * When using with sp-mode, you may be charged.
General Inquiries 0120-005-250 (toll free) Repairs ■From DOCOMO mobile phones (In Japanese only) (No prefix) 113 (toll free) *Service available in: English, Portuguese, Chinese, Spanish. *Unavailable from part of IP phones. (Business hours: 9:00 a.m. to 8:00 p.m.) *Unavailable from land-line phones, etc. ■From DOCOMO mobile phones (In Japanese only) (No prefix) 151 (toll free) ■From land-line phones (In Japanese only) *Unavailable from land-line phones, etc.
