User guide Miracast™ Wireless Display IM10
Contents Miracast™ Wireless Display User guide........................................3 Setting up the Miracast™ Wireless Display...................................4 Hardware overview............................................................................4 Turning on and connecting the Miracast™ Wireless Display to a HDTV..................................................................................................4 Sharing your content using screen mirroring.....................................
Miracast™ Wireless Display User guide 3 This is an Internet version of this publication. © Print only for private use.
Setting up the Miracast™ Wireless Display Hardware overview 1 Micro USB port 2 Reset button 3 HDMI port 4 Notification light 5 Connect button Turning on and connecting the Miracast™ Wireless Display to a HDTV To turn on the Miracast™ Wireless Display Make sure to use the charger that comes with the dongle. 1 2 Plug one end of the charger cable into the charger. Plug the other end of the charger cable into the Micro USB port of the dongle.
To connect the Miracast™ Wireless Display to a HDTV 1 2 Plug one end of the HDMI cable into the HDMI port of the HDTV. Plug the other end of the HDMI cable into the HDMI port of the Miracast™ Wireless Display. A Sony™ logo appears on the HDTV screen, indicating that the connection is successful. Sharing your content using screen mirroring Launching screen mirroring Depending on your mobile device and Android™ version, there are different ways to mirror your screen from your Android™ device.
To launch screen mirroring using NFC 1 2 3 4 Make sure your Miracast™ Wireless Display is powered on, connected to the HDTV, and standing by. Android™ device: Make sure the NFC function is turned on and that the screen is activated and unlocked. Place your Android™ device over the Miracast™ Wireless Display so that the NFC detection area of each device touches the other. Follow the instructions that appear on the screens of your Android™ device and the HDTV.
Connecting when the dongle is placed out of reach Most users connect to the Miracast™ Wireless Display using the Connect button on the dongle. This is the default connection mode. However, if the dongle is not placed within reach, for example, if it’s connected to a projector and fixed to a ceiling, the dongle must be set to remote connection mode. You can then connect to the dongle using a PIN code. The PIN code is shown by the projector or HDTV once screen mirroring is turned on in your Android™ device.
Resetting the Miracast™ Wireless Display Reset the Miracast™ Wireless Display if it behaves unexpectedly. When you reset the dongle, all information about paired Android™ devices is deleted. • To reset the Miracast™ Wireless Display Press and hold down the Reset button until the notification light turns off briefly and then flashes white. 8 This is an Internet version of this publication. © Print only for private use.
Legal information Sony IM10 Prior to use, please read the Important information leaflet separately provided. This User guide is published by Sony Mobile Communications AB or its local affiliated company, without any warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Mobile Communications AB at any time and without notice.
Industry Canada Statement This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. 10 This is an Internet version of this publication.