User's Guide

Getting started
Preparing to use your headset with a Bluetooth® device
Before you can start using your headset with a Bluetooth® device, you need to pair
the headset with the Bluetooth® device manually using Bluetooth® or automatically
using NFC.
To manually pair your headset with a Bluetooth® device
1
Bluetooth® device: Make sure the Bluetooth® function is turned on.
2
Turn off your headset.
3
Headset: Press and hold down
until a blue notification light starts flashing
rapidly.
4
Bluetooth® device: Scan for Bluetooth® devices, then select SBH60 in the list
of available devices.
5
Bluetooth® device: Follow the pairing instructions that appear on the screen.
To automatically pair your headset with a Bluetooth® device
1
Bluetooth® device: Make sure that the NFC function is turned on and that the
screen is active and unlocked.
2
Place the Bluetooth® device over your headset so that the NFC detection area
of each device touches the other.
3
Bluetooth® device: Follow the pairing instructions that appear.
The device used in this illustration is for illustration purposes only and may not accurately
depict the actual device used.
Using your headset in wired mode
You can also use your Stereo Bluetooth® Headset SBH60 as a wired headset. When
you insert the audio cable into the 3.5 mm audio jack, the headset is automatically
turned off and disconnected with any paired Bluetooth® devices. Your headset does
not need to be turned on during wired mode.
7
This is an Internet version of this publication. © Print only for private use.