User's Guide

Using your headset
Call handling
To answer a call with the headset
•
When you hear an incoming call signal, press the Call key.
To end a call
•
During an ongoing call, press the Call key.
To reject a call
•
When you hear an incoming call signal, press and hold down the Call key.
To answer a second call
•
When you hear an incoming call signal during an ongoing call, press the Call
key. The ongoing call is put on hold.
To reject a second call
•
When you hear an incoming call signal during an ongoing call, press and hold
down the Call key.
To switch between two calls
•
Double press the Call key shortly.
Multipoint technology
Use Multipoint technology to connect your headset to two Bluetooth® devices at the
same time. For example, if you connect your headset with two phones, you can
receive calls from both phones without having to disconnect and reconnect.
If you prefer that your headset connects to just one Bluetooth® device at any given
time, you can use Singlepoint mode instead. Singlepoint mode is enabled by default.
Before pairing your headset with a new device in Singlepoint mode, make sure that
you disconnect it from other devices.
Multipoint mode consumes more battery power than Singlepoint mode.
To connect your headset to two devices at the same time
1
Make sure that the headset is paired successfully with one Bluetooth® device
and the other Bluetooth® device has the Bluetooth® function turned on.
2
Turned off the headset.
3
Press and hold down the Power key until a green notification light starts
flashing rapidly.
4
Double press the Power key shortly. After Multipoint mode is activated, a
yellow notification light will flash twice.
5
Pair and connect your headset to the second Bluetooth® device.
6
The first Bluetooth® device:To reconnect the headset, select MBH20 in the list
of paired devices on the screen of the Bluetooth® setting.
To switch between Multipoint mode and Singlepoint mode
1
Make sure that the headset is turned off.
2
Press and hold down the Power key until a green notification light starts
flashing rapidly.
3
Double press the Power key shortly. After Singlepoint mode is activated, a
yellow notification light will flash once.
4
To switch to Multipoint mode, double press the Power key shortly again. A
yellow notification light will flash twice.
6
This is an Internet version of this publication. © Print only for private use.