User's Guide

Setting up your SmartBand Talk
Preparing to use your SmartBand Talk
For your SmartBand Talk to work, it must be connected to your Android™ device and
the latest versions of the following applications must be installed on the Android™
device: SmartBand Talk SWR30 and Lifelog.
If you set up your SmartBand Talk using NFC, you are guided during setup to Google
Play™, from where you can install the necessary applications to use with your
SmartBand Talk.
If you set up your SmartBand Talk using Bluetooth®, you have to go through some
extra steps to install the necessary applications from Google Play™ and connect to
your Android™ device.
To set up your SmartBand Talk using NFC
1
Make sure that your SmartBand Talk is charged for at least 30 minutes.
2
Android™ device: Make sure that the NFC function is turned on and that the
screen is active and unlocked.
3
Place the Android™ device over your SmartBand Talk so that the NFC area of
each device touches the other, then follow the instructions on the Android™
device to install the SmartBand Talk SWR30 application and the Lifelog
application.
appears in the status bar when the SmartBand Talk is
connected.
If you touch the NFC areas of each device to each other after all applications are installed and
your SmartBand Talk is on and connected, the Lifelog application starts automatically.
To set up your SmartBand Talk using Bluetooth®
1
Make sure that your SmartBand Talk has been charged for at least 30 minutes.
2
Turn on your SmartBand Talk.
3
Android™ device: Turn on the Bluetooth® function, then scan for Bluetooth®
devices and select SWR30 in the list of available devices.
4
Follow the instructions to install the SmartBand Talk SWR30 application and
the Lifelog application.
appears in the status bar when the SmartBand Talk
is connected.
All applications required for the SmartBand Talk to work are available on Google Play™.
Reconnecting your SmartBand Talk
In cases where a connection gets lost, for example, when the connected Android™
device goes out of range, your SmartBand Talk automatically performs a series of
reconnection attempts. If no connection is found after a certain period, your
6
This is an Internet version of this publication. © Print only for private use.