User's Manual

36
Before Using the Terminal
･
When "Install software" screen appears
on the terminal, tap [SKIP] or [CANCEL].
･
When the USB tethering confirmation
screen appears, tap [DO NOT USE].
･
When a screen for new hardware
detection etc. appears on the PC, select
"
キャンセル
(Cancel)".
3
When charging is complete,
disconnect the USB plug of the
microUSB cable from the USB port
on your PC and disconnect the
microUSB plug from the terminal.
❖
Note
･
Check the connecting direction to connect correctly.
Wrong connection may cause damage.
1
Press and hold
O
for at least 1
second.
･
The terminal vibrates and lock screen
appears after a while.
･
When you first turn on the terminal
after purchasing, follow the onscreen
instructions to make initial settings
(P.37).
2
Cancel the screen lock.
･
Canceling the screen lock (P.37).
❖
Information
･
If the notification LED flashes red three times or an
icon appears indicating that the battery is low when
you press
O
with the terminal powered off, the
battery is running low. Charge the terminal (P.32).
･
When SIM card lock (P.174) is set, enter PIN code on
the PIN code entry screen (P.174).
Turning power on/off
Turning power on