User's Manual

To insert a memory card
1
Open the nano SIM/memory card slot cover.
2
Using a fingernail or other similar object, drag out the
holder for the nano SIM card and memory card.
3
Place the memory card in the memory card slot in the
holder, then re-insert the holder.
4
Close the cover.
To insert the nano SIM card
Your device only supports nano SIM cards. When you drag
out the holder for the nano SIM card and memory card to
insert the nano SIM card, do not turn the holder upside
down. Make sure you re-insert the holder in the correct
orientation.
1
Open the nano SIM/memory card slot cover.
2
Using a fingernail or other similar object, drag out the
holder for the nano SIM card and memory card.
3
Place the nano SIM card in the nano SIM card slot in the
holder, then re-insert the holder.
4
Close the cover.
If you insert a nano SIM card while the device is powered
on, the device restarts automatically.
To turn on the device
1
Make sure your device is charged for at least 30 minutes
before you turn it on for the first time.
2
Press and hold down the power key
until the device
vibrates.
3
Wait a while for the device to start.
To activate the screen
•
Briefly press the power key .
Dust and water protection
Your device is waterproof and protected against dust: all
ports and attached covers should be firmly closed. You
should not put the device completely under water or expose
it to sea water; salt water; chlorinated water; or liquids such
as drinks. Improper use will invalidate the warranty. Your
device has the Ingress Protection ratings IP65 and IP68. To