User's Manual

150
Settings
Using Wi-Fi Direct compatible device
You can connect among the devices
compatible with Wi-Fi Direct via Wi-Fi even
without configuring access point.
･
Turn Wi-Fi on beforehand (P.148).
1
From the Home screen,
u
[Settings]
u
[Wi-Fi].
2
u
[Advanced]
u
[Wi-Fi Direct].
3
Select a Wi-Fi Direct compatible
device name to connect.
･
Tap [SEARCH FOR DEVICES] to refresh
the detection list.
･
To change the terminal name displayed
on the detected Wi-Fi Direct
compatible device, tap [RENAME
DEVICE].
❖
Information
･
Wi-Fi function becomes available when you install a
compatible application.
Advanced Keep Wi-Fi on
during sleep
Set whether to disable
the Wi-Fi function
when the screen
backlight turns off. You
can set to turn on every
time for charging the
battery, too.
･
By default, "Keep Wi-
Fi on during sleep" is
set. When not
charging the battery,
Wi-Fi connection is
disconnected in
approximately 15
minutes after the
backlight turns off.
Install
certificates
Install certificates.
Wi-Fi Direct P. 1 5 0
WPS Push
Button
P. 1 4 8
WPS PIN Entry P. 1 4 8
Auto IP support Switch ON/OFF of Auto
IP function.
Passpoint Set whether to connect
to available Passpoint
network automatically.
MAC address Check MAC address.
IP address Check IP address.