01H INSTRUCTION MANUAL 15.
Introduction ● "Instruction Manual" (PDF file) Operations and settings of each function are explained. It can be downloaded from NTT DOCOMO website. https://www.nttdocomo.co.jp/english/support/ trouble/manual/download/index.html Thank you for your purchase of "SO-01H". For proper use of the SO-01H, read this manual carefully before and while you use the SO-01H. * You can download the latest information of " ク イックスタートガイド (Quick Start Guide)".
Operation descriptions In this manual, each key (key icon) operation is described with P, k, b, h, n. And selection operations of the icons or function items on the touch screen are described as follows. Description From the Home screen, u [Settings]u[About phone]. Operation From the Home screen, tap (Apps button), and then tap "Settings" on the next screen and "About phone" on the following screen in order. Touch and hold an Keep touching an icon longer (1icon. 2 seconds).
Supplied accessories ･ ･ 安全上／取り扱い上のご注意 (Notes on usage Safety/Handling precautions) (In Japanese only) SO-01H (with warranty) ･ ･ クイックスタートガイド (Quick Start Guide) (In Japanese only) SO-01H のご利用にあたっての注意事項 TV/Mobacas antenna cable SO02 For optional accessories compatible with the terminal (optional) , refer to NTT DOCOMO website. https://www.nttdocomo.co.
Contents ■ Supplied accessories. . . . . . . . . . . . . . . . . 2 ■ About using the terminal . . . . . . . . . . . . 5 ■ Safety Precautions (Always follow these directions) . . . . . . . . . . . . . . . . . . . . . . . . . . 7 16 22 ■ Handling precautions. . . . . . . . . . . . . . . ■ Waterproofness/Dustproofness . . . . . Before Using the Terminal . . . 27 Part names and functions................................................27 docomo nano UIM card....................................................
Location services................................................................ 138 Schedule.................................................................................. 141 Alarm & clock........................................................................ 142 docomo backup ................................................................. 144 Settings . . . . . . . . . . . . . . . . . . . 147 Viewing the setting menu............................................ 147 Wireless & networks.............
Contents/Precautions About using the terminal The terminal supports LTE, W-CDMA, GSM/ GPRS and Wireless LAN Systems. ･ Because a terminal operates using radio frequencies, it cannot be used inside a tunnel, underground, in a building or other locations where radio waves do not reach the terminal, in locations with weak radio wave condition, or out of Xi/FOMA service area.
The terminal automatically performs communication for synchronizing data, checking the latest software version, and maintaining a connection with the server, and for other purposes. If you transmit a large amount of data, such as when downloading applications or watching video, a packet communication charge becomes high. Subscription to Packet Pack/packet flat-rate service is highly recommended.
The terminal supports only sp-mode, mopera U and Business mopera Internet. Other providers are not supported. ･ To use tethering, subscription of sp-mode is required. ･ If you want to use tethering, subscription to Packet Pack/packet flat-rate service is strongly recommended. ･ For details on usage charge, refer to NTT DOCOMO website. ･ Display is manufactured by taking advantage of highly advanced technology but some dots may be always or never lit.
■ The following symbols indicate specific directions. Indicates prohibited actions. 1. Handling the terminal, adapter, docomo nano UIM card, and TV/ Mobacas antenna cable (common) Don’t DANGER Indicates not to disassemble. No disassembly Don’t No liquids No wet hands Do Unplug ■ Indicates not to use where it could get wet. Indicates not to handle with wet hands. Indicates compulsory actions in accordance with instructions. Indicates to remove the power plug from the outlet.
No liquids Do Do not allow liquid (water, drinking water, urine of pet animals, perspiration, etc.) to enter the charging jack, headset jack, or microUSB jack. Doing so may cause fire, burns, injury or electric shock. Waterproofness → P.22 "Waterproofness/ Dustproofness" Do Use optional devices specified by NTT DOCOMO for the terminal. Failure to do so may cause fire, burns, injury or electric shock. CAUTION Do not subject the equipment to excessive force or throw it.
Do Be careful especially when using the terminal connected to the adapter continuously for a long time. If you play a game, watch videos or TV, etc. for a long time while charging, the temperature of the terminal and adapter may rise. If you are directly in contact with hot parts for a long period of time, it may cause your skin to become red, itchy, or develop a rash depending on your physical condition and also it may cause low-temperature burn. WARNING Don’t Don’t 2.
Do Do Do Do Follow the instructions of each medical facility for the use of mobile phones on their premises. Power off the terminal in a place where the use is prohibited. Failure to do so may affect electronic equipment and electronic medical equipment. If the microUSB cable is connected into the microUSB jack for charging etc. with the terminal powered off, the terminal is automatically powered on although the operations are not available.
CAUTION Don’t Don’t Don’t Don’t Don’t Do not swing the terminal around by holding strap, etc. The terminal may hit you or others and cause accident such as injury. Do Do not use damaged terminal. Doing so may cause fire, burns, injury or electric shock. When using the motion sensor, check the safety around you, hold the terminal firmly, and do not shake it unnecessarily. Failure to do so may cause accident such as injuries.
3. Handling the adapter WARNING Don’t Don’t Don’t Don’t Don’t Don’t Do not use the adapter cord if it gets damaged. Doing so may cause fire, burns or electric shock. Don’t When you insert and remove the AC adapter from power outlet, do not contact a metal strap or other metal objects with the jack. Doing so may cause fire, burns or electric shock. Don’t Do not put an excessive force up, down, left or right when the adapter is connected to the terminal.
Do Do Do Do Do When the fuse in a DC adapter is blown, make sure to use the specified fuse. Failure to do so may cause fire, burns or electric shock. For the specified fuse, see the users manuals that supplied with a DC adapter. Unplug Before cleaning, remove the power plug from the power outlet or the cigarette lighter socket. Failure to do so may cause fire, burns or electric shock. Don’t Do not touch the adapter for a long time when it is connected to a power outlet or cigarette lighter socket.
5. Handling the terminal near electronic medical equipment 6. Material list Part WARNING Do Do Do Do If you use an implantable cardiac pacemaker or implantable cardioverter defibrillator, keep the terminal 15 cm or more away from the implant at all times. The radio waves from the terminal may affect the performance of electronic medical equipment.
Handling precautions ■ ･ If the jack is soiled, connection gets worse and it may cause power to be turned off or insufficient battery charge, so clean the jack with a dry cotton swab etc. When cleaning, be careful not to damage the terminals. Common precautions ･ SO-01H is waterproof/dustproof; however, do not allow water or dust to enter the terminal or come in contact with accessories or optional devices. The adapter, docomo nano UIM card, and TV/ Mobacas antenna cable are not waterproof/ dustproof.
■ The terminal precautions ･ Do not press touch screen surface forcibly, or not operate with a sharppointed objects such as nail, ballpoint pen, pin, etc. Doing so may cause damage of touch screen. ･ Do not use the terminal in extremely hot or cold places. Use the terminal where the temperature ranges between 5 ℃ and 40 ℃ (limited to the temporary use in a bathroom etc. when temperature is above 36 ℃ ) and humidity ranges between 45% and 85%.
Charge the battery in an environment with the proper ambient temperature (5 ℃ to 35 ℃ ). ･ The operating time of the internal battery varies depending on the operating environment and the degradation level of the internal battery. ･ Be careful especially about the following points when preserving the terminal.
Take an expended docomo nano UIM card to a sales outlet such as docomo Shop for proper disposal in order to protect the environment. ･ Do not carelessly damage, contact, or short-circuit an IC. ･ ･ Frequency band The frequency band used by the terminals Bluetooth/wireless LAN function is written as follows: Doing so may cause data loss or malfunction. ･ 2.4 : This radio equipment uses the 2400 MHz band. FH/XX/DS/OF： Modulation scheme is the FH-SS, other system, DS-SS, or OFDM system.
- Before using this equipment, confirm that "another station" is not being operated nearby. - In the event of the terminal causing harmful radio wave interference with "another station", promptly change the operating frequency or stop radio wave emission by turning off the power, etc. - If you have further questions, contact "General Inquiries" on the last page.
■ FeliCa® and NFC reader/writer function precautions FeliCa and NFC reader/writer, P2P function of the terminal use weak waves requiring no licenses for radio stations. ･ They use 13.56 MHz frequency band. When using other reader/writer or P2P function in your surroundings, keep the terminal away sufficiently from them. Before using the FeliCa and NFC reader/ writer, P2P function, confirm that there are no radio stations using the same frequency band nearby.
Waterproofness/ Dustproofness SO-01H provides waterproofness property of IPX5*1, IPX8*2, and dustproofness property of IP6X*3 with the docomo nano UIM card/ microSD card slot cover firmly attached. *1 IPX5 means that a phone keeps functioning after applying a jet flow of 12.5 L/min. from every direction from a distance of approximately 3 m for at least 3 minutes using water nozzle in 6.3 mm inner diameter. *2 IPX8 means that a phone keeps functioning after SO-01H is slowly submerged to depth of 1.
･ You can use the terminal in a bathroom. - Do not immerse the terminal into a bathtub. Also, do not use the terminal in hot water. Doing so may cause malfunction. If you should fall the terminal into the bathtub, immediately pick it up to drain water in specified procedure (P.25). - Never put the terminal in hot spring water or water containing soap, detergent or bath powder. In case the terminal gets wet with water other than tap water, wash it in the procedure above.
■ Opening the docomo nano UIM card/ microSD card slot cover Open the covers with your fingertip by the grooves. Important precautions Do not perform actions shown in the illustrations below. Using Soap/Detergent/ Washing with brush/sponge Bath powder ■ Machinewashing Applying strong water flow Closing the docomo nano UIM card/ microSD card slot cover Put the cover back in the direction of the arrow and push the parts in, then ensure there are no gaps.
Do not move the terminal in water or slam the terminal against the surface of water. ･ If you put the terminal in tap water, be sure to have it within 30 minutes. ･ When you use the terminal in swimming pool, obey rules of the facility. ･ The terminal does not float on water. ･ Do not leave water on the terminal. In cold region, the terminal freezes up and may cause malfunction. ･ Do not leave water on the earpiece/speaker, microphone/speaker, second microphone, and headset jack.
c d To wipe any water off the gaps or the following parts, tap the terminal against a dry, clean cloth or similar material about 10 times. ･ Earpiece/Speaker ･ Microphone/Speaker ･ Second microphone ･ Headset jack ･ microUSB jack ･ Power key/Screen lock key ･ Volume key/Zoom key ･ Camera key ･ docomo nano UIM card/microSD card slot cover Wipe off water drained from the terminal with dry, clean cloth etc., and dry naturally. ･ Wipe off water drained from the terminal with dry, clean cloth etc.
Part names and functions a g b c d h st l h m i j k u v o p e q r f a b c d n Notification LED Front camera lens Earpiece/Speaker Proximity sensor : Detect the face to get close during a call and turn on or off the touch screen to prevent misoperation, or help auto brightness control.
❖Note ■ Do not put a sticker etc. on the proximity sensor. The back cover cannot be removed. Attempting to remove the back cover with excessive force may cause damage or malfunction. ･ The battery is built into the terminal and not removal. ･ ･ docomo nano UIM card The docomo nano UIM card is an IC card recorded user information such as your phone number etc. ･ You can use the terminal with a docomo nano UIM card.
Inserting docomo nano UIM card 1 Open the docomo nano UIM card/ microSD card slot cover, then hook your fingertip on the projection part of the tray ( ) to pull it straight out of the terminal. 3 2 Close the docomo nano UIM card/ microSD card slot cover, firmly press the parts, and make sure that there are no gaps between the terminal and cover. Set docomo nano UIM card into the tray with IC facing up ( ), then insert the tray with the card and press it all the way into the terminal.
Removing docomo nano UIM card 1 2 3 Open the docomo nano UIM card/ microSD card slot cover, then hook your fingertip on the projection part of the tray to pull it straight out of the terminal. Remove the docomo nano UIM card from the tray ( ), then insert the tray into the terminal and press it straight all the way. ･ Close the docomo nano UIM card/ microSD card slot cover, firmly press it, and make sure that there are no gaps between the terminal and cover (P.29).
Life of the internal battery Charging The internal battery is not fully charged at the time of purchase. ･ Estimated charging time (P.210) Operation time on full charge (estimate) The charging time varies by the internal battery condition or operating environment. ･ "Continuous standby time", "Continuous call time" (P.212) Continuous FOMA/3G stand-by time GSM LTE Continuous FOMA/3G call time GSM VoLTE call (voice) Stationary (Auto) : Approx. 480 hours Stationary (Auto) : Approx.
Before charging It is recommended to use the AC Adapter 05 (optional) for charging. For details on the AC Adapter 05, refer to the AC Adapter 05 manual. ･ The AC Adapter 05 is compatible with 100V to 240V AC. For using the terminal overseas, a plug adapter that fits the electrical outlets in the country you stay is needed. Do not use an electrical transformer for overseas use to charge the terminal. ･ Use a compatible AC adapter or microUSB cable for charging.
2 3 ■ Attaching Unfold the power plug of the AC adapter and insert it into an outlet. the shape of front/back of 1 Check the attachment and the attaching Place the terminal on the desktop part of the desktop holder, then fit holder. ･ Notification LED of the terminal turns the attachment with the desktop on (P.42). holder. 4 When charging is complete, holding the desktop holder, lift the terminal up to remove. 5 Remove the power plug of the AC adapter from the power outlet.
Charging with AC adapter When using AC Adapter 05 (optional) for charging, do the following procedures. 3 When charging is complete, remove the power plug of the AC adapter from the power outlet. 4 Remove the microUSB plug of the AC adapter evenly from the terminal. ❖Note Check the connecting direction to connect correctly. Wrong connection may cause damage. ･ Charging with DC adapter DC Adapter 04 (optional) supplies power from a car cigarette lighter socket (12V/24V).
Charging with a PC 2 When using Micro USB Cable 01 (optional) for charging, do the following procedures. 1 Insert the microUSB plug of the microUSB cable horizontally into the microUSB jack on the terminal with the engraved side ( ) facing up. Insert the USB plug of the microUSB cable into a USB port of a PC. Notification LED of the terminal turns on (P.42). ･ When "Install software" screen appears on the terminal, tap [SKIP]. ･ When a screen for new hardware detection etc.
Turning power on/off Turning power on 1 Press and hold P for over a second. The terminal vibrates and lock screen appears after a while. ･ When you first turn on the terminal after purchasing, follow the onscreen instructions to make initial settings (P.37). ❖Information If P is pressed to turn the power on when the battery level is low, the notification LED flashes in red 3 times, or an icon appears indicating that the battery level is low. Charge the terminal (P.31). ･ When SIM card lock (P.
Canceling the screen lock The lock screen appears when turning the power on or the sleep mode is canceled by pressing P. 1 2 3 [OK]u[OK]. When the initial settings screen for docomo services appears, mark [Agree to all]u[Start settings]. ･ Swipe (or flick) up on the lock screen. ❖Information On the lock screen, swipe to open the "Phone" application, or swipe to open the "Camera" application. ･ You can change screen unlock method (P.168).
Basic operations Using the touch screen ■ Touch the screen and flick up/down or left/ right. ■ Touch screen is designed for being touched lightly with fingers. Do not push the touch screen hard with a finger or press sharp objects (nail, ballpoint pen, pin, etc.) against the screen. ･ Touching the touch screen may not work in the following cases. Note that it may cause malfunction.
Basic key icon operation b h n b Back Go back to the previous screen. Or close a dialog box, an option menu, the Notification panel, etc. h Home Go to the Home screen. Touch and hold the icon and drag it to to open the "Google" application. n Recently Display thumbnails of recently used apps used applications. You can open or quit them here (P.59). Small apps are also available (P.59). * In this manual, each key icon operation is described with b, h, and n.
Setting silent mode Setting the terminal to silent mode does not mute sounds for shutter, playback of video or music, dialpad operation sound during a call or sound emitted when is tapped, etc. ･ While silent mode is set, adjusting the "Ring volume" in "Sound & notification" (P.159) or turning up the volume by pressing the volume up key cancels silent mode. Capturing a still image or video displayed on the screen ･ You can capture what is displayed on the screen.
Recording a video (Record screen) 1 Press and hold P for over a secondu[Record screen]. A control panel is displayed. ･ If terms of use are displayed, read them and then tap [AGREE]. 2 3 Tap to start recording. Tap the recording time buttonu Tap to finish recording. Screen recording is recorded and appears in the status bar. ･ Tap to close the control panel. Setting Emergency mode In case of emergency such as disaster, restrict functions to save the battery power.
Notification LED Notification LED provides information on the terminal status, incoming calls, mail reception, etc. ･ Notification LED when STAMINA® mode is set (P.
Bluetooth function ON Connecting to Bluetooth device Airplane mode activated Silent mode (with vibration) ON Silent mode (without vibration) ON Speakerphone ON Microphone put on mute Alarm is set NFC Reader/Writer, P2P function ON Positioning with GPS Connecting to a VPN Battery status The battery is charging Battery is low (4％ or less) PUK code locked, or docomo nano UIM card not inserted STAMINA mode ON Low battery mode ON ❖Information ･ Status icons displayed in the status bar can be changed (P.157).
Omakase Lock set on the terminal or docomo nano UIM card Receiving a call Making a call*/during a call* Incoming call on hold*/ongoing call on hold* Missed call Message is recorded in Answering Machine New voice mail Event notification for Schedule Stopwatch is running Timer in use Alarm in snooze mode Playing a track with Media Player Playing a truck in Music Receiving Mobacas Watching TV*/notification of reserved watching Recording TV*/notification of reserved recording FM radio in use* USB connected MHL
Notification panel When notification icons appear on the status bar, you can open the Notification panel to check the notifications, activate corresponding application, etc. 1 Quick settings panel You can open the quick settings panel to enable or disable functions. 1 Drag the status bar downwards with two fingers. Drag the status bar downwards. a b cde a b f a b Notification Clear ･ Clear contents on the Notification panel. Some notifications may not be cleared.
Enable/disable NFC Reader/Writer, P2P function. Hotspot Enable/disable Tethering & portable hotspot function. Location Enable/disable location information. Airplane mode Enable/disable Airplane mode. Auto-rotate Set whether to switch portrait/ landscape view automatically according to the terminal orientation. Sound Enable sound/silent mode (with vibration)/silent mode (without vibration). Glove mode Enable/disable Glove mode. Detect USB Have the terminal recognize a USB device device connected to it (P.
❖Information ･ To change the initial home screen for operations, switch the home screen you want to change to, touch and hold the area of the Home screen where no icons are displayeduTap . Adding a home screen Up to 7 home screens can be displayed. 1 Touch and hold an area of the Home screen where no icons are displayed. ･ 2 Alternatively, pinch-in on the Home screen. Flick the Home screen left or rightu . ❖Information To return to the Home screen, tap h or b, or tap any home screen.
3 [Apps]/[Shortcuts]uSelect the application/shortcut you want to add. ･ When a data selection screen or setting screen appears, follow the onscreen instructions. Changing wallpaper You can change wallpaper of the Home screen. 1 ❖Information To return to the Home screen, tap h or b, or tap any home screen. ･ To delete a shortcut, from the Home screen, touch and hold the shortcut to deleteuDrag it to "Remove" displayed at the top of the screen.
Changing theme You can change themes for the Home screen, wallpaper of the lock screen, etc. 1 Touch and hold an area of the Home screen where no icons are displayed. ･ 2 3 Alternatively, pinch-in on the Home screen. ■ Applications on the Simple Home screen Maps Browser Settings My Apps Tools [Themes]uSelect an image. u[OK]. Simple Home screen Set Simple Home to use Home screen and the setting menu limited to basic functions. 1 2 From the Home screen, u[Settings]u[Home]u[Simple Home]u[OK].
Apps* Speed dial ― P.50 * Applications such as "Anshin Scan", "docomo backup", etc. appear. ❖Information ･ To change to the standard Home screen, from the Simple Home screen, tap [Settings]u[Exit Simple Home]u[OK]u[docomo LIVE UX]/[Xperia™ Home]. ■ 1 ･ ■ 1 Using speed dials 1 2 Operation during a call (P.80) Sending messages (SMS)/mail On the Simple Home screen, select a speed dialu[Send message]/ [Send email].
Using Settings 1 Sound On the Simple Home screen, [Settings]. My profile Display Wallpaper Themes Brightness Auto-rotate screen Font size Sleep Screen lock Check your own phone number and mail address, etc. Set the wallpaper for the Simple Home screen or the lock screen. Set the theme for the wallpaper on the Simple Home screen or the lock screen. Adjust the screen brightness. Set whether to switch portrait/landscape view automatically according to the terminal orientation.
❖Information ･ Changing applications on the Simple Home screen 1 On the Simple Home screen, [Settings]u[Customize Home]. 2 3 [Change apps]/[Reorder apps]. Select applications to changeu Select applications to display/ select a location to move to. ･ 4 This section describes the application screen displayed when the home application is set to "Xperia™ Home". ･ Switching Home application (P.60) 1 From the Home screen, a . c d Grayout applications cannot be changed. [OK].
Application list Applications displayed on the application screen are as follows. ･ For usage of some applications, separate subscription (Charged) is required. Contacts Open the Xperia™ phonebook application to manage contact information for your friends and family. Dial Open the Xperia™ phone application to make/ receive calls. Messaging Send and receive messages (SMS). → P.90 Browser View web pages in Browser. → P.99 Music Play music files stored on your internal storage or microSD card.
ツール (Tools) This contains the following applications: Calculator Perform basic arithmetic operations and other various calculations. Audio Recorder Record speech, music, and other audio with high sound quality. Sketch An application that allows you to create drawings or illustrations by touching the screen or to import photos and modify them. File Commander Search for still pictures, videos, music files, downloaded files, and so on.→ P.178 Email Send and receive emails. Multiple accounts are available. → P.
Instruction Manual Display the terminal instruction manual. You can directly start a function you want to use from the explanation (in Japanese only). * See "About manuals of SO-01H" in "Introduction". ドコモクラウド (docomo cloud) This contains the following applications: docomo phonebook A phonebook application provided by docomo. It allows you to manage your "docomo account" phonebook data in the cloud. → P.85 docomo mail Send/receive mails using DOCOMO mail address (@docomo.ne.jp).
遠隔サポート (Enkaku support) An application for using " あんしん遠隔サポー ト (Anshin Enkaku Support)". " あんしん遠隔サ ポート (Anshin Enkaku Support)" is a service that allows staff of the Call center to support the terminal operations by remote-checking the display of your own terminal.→ P.202 Disaster kit An application for using Disaster Message Board, Disaster Voice Messaging Service and Early Warning "Area Mail".→ P.98 Visa prepaid An application for readily issuing Visa prepaid card that is dedicated to Internet shopping.
Evernote Create memos, images, audio files, and other content and manage them in one place. Instagram An application that allows you to freely edit photos and videos taken with your terminal and share them easily with people around the world. Twitter Official Twitter client application. Post a short message on the website and communicate with someone else.
Having multiple applications running can consume more battery power, resulting in fewer hours of use. For this reason, it is recommended to quit applications that you are not using. To quit an application, nuFlick left or right on its thumbnail. ･ Adding an application to the Home screen Uninstalling an application Before uninstalling application, back up contents related to the application that you want to save including data saved in the application. ･ Some applications may not be uninstalled.
❖Information To move an icon to a folder, on the application screen, touch and hold an icon you want to moveuDrag it over a folder. ･ To take out an application icon from a folder, tap the folderuTouch and hold the application iconuDrag it to a place you want to locate. ･ To change a folder name, tap a folderuTap the folder nameuEnter a folder nameuTap [DONE]. Task manager ･ You can check the recently-used applications and end them.
Using small apps 1 2 Switching Home application n. ･ Your set small apps will appear in the Favorites bar at the bottom of the screen. Select a small app to use. ❖Information If several small apps are set, flick left or right on the Favorites bar to see them. ･ To close a running small app, tap . In the terminal, you can switch the Home screen between "docomo" or "Xperia™". 1 From the Home screen, u[Settings]u[Personalization] u[Preferred apps settings]. 2 [Set all to]/[Home screen].
Searching information in the terminal and web pages Enter a word in the search box to browse the information in the terminal or on the Internet. ❖Information ･ Alternatively, from the Home screen, tap u[Voice Search] to activate the "Voice Search" application. Search settings You can set the language to use for searching and the type of data you want to find when searching your terminal. 1 From the Home screen, tap the Google search widget. 1 2 Enter a search word. 2 3 Tap an item or keyboard.
POBox Plus 日本語入力 使い方ガイ ド (Xperia™ Japanese keyboard Online help) Character input method for the terminal is set to"Xperia™ Japanese keyboard" by default when the language is set to 日本語 (Japanese). Details on using Xperia Japanese keyboard are explained in "POBox Plus 使い方 ガイド (Online help)". 1 On the character entry screen, of the quick tool bar. ･ ･ 2 Details of the quick tool bar (P.
Switching software keyboard or changing the settings For beginners Display the tool list to switch between software keyboard and handwriting/voice input, use plug-in applications (extensions), or change the settings. 1 On the character entry screen, of the quick tool bar. ･ ･ Details of the quick tool bar (P.64) If the quick tool bar does not appear, tap (for character mode of "Alphabet" and "Numeric", tap / to switch to "Kana", then appears).
b Character input method Show/hide the quick tool bar. When you tap a key on the software keyboard, candidates list for the entered characters appears. Tap a word you want to enter from the candidate list, text can be input one after another. a c b f c g d h e i Keypad a d g b f e h i c QWERTY h d f j c i g Handwriting input a Characters assigned to a key appear in reverse order. / Appears when entering numbers, tap to switch onebyte/two-byte character.
i Enter a line feed. * j Appears before fixing character and fixes the character. * In some screens, , " 次へ (Next)", " 完了 (Done)", " 実行 (Go)", etc. appear. Return to keypad/QWERTY. Flick input Flick up/down/left/right to enter characters in each column of kana syllabary. Ex: Entering characters in " な " column You can enter " な " only by tapping. Flick left for " に ", up for " ぬ ", right for " ね " and down for " の ".
❖Information or 1 2 Tap " あ " onceu(Immediately) Tap " あ " 5 times. . ❖Information To switch the input method between "Flick input" and "Multi-tap input", tap in the quick tool bar on the character entry screenu[Settings]u[Input method]u[Input method], then select the desired item. ･ Editing text On the character entry screen, double-tap character you want to edit so that text edit menu appears at the top of the screen. Drag or to change the character string to select.
❖Information "HISTORY" tab displays contacts that are picked up when entering characters. ･ My Words Register words to My Words beforehand to display the words as the preferred candidates when entering characters. 1 On the character entry screen, of the quick tool bar. ･ ･ 2 3 4 5 6 Details of the quick tool bar (P.64) If the quick tool bar does not appear, tap (for character mode of "Alphabet" and "Numeric", tap / to switch to "Kana", then appears). [My Words]. .
docomo LIVE UX Home screen Managing the Home screen Tapping h displays Home screen which consists of up to 7 screens you can use flicking left and right. a b Move application icons or add widgets or folders to the Home screen. f c d e g h Adding/Moving applications etc. to the Home screen "ひつじのしつじくん® (Butler Sheep)" ©NTT DOCOMO 1 Touch and hold an area of the Home screen where no icons are displayed. 2 Any of [Show apps]/[Show widgets]/[Create folder]/[MachiChara display setting].
Moving an icon on the Home screen 1 2 ❖Information You can disable some applications or widgets which cannot be uninstalled by dragging to "Disable app" in Step 2 (P.163). ･ From the Home screen, touch and hold an icon you want to move. Drag it anywhere. ･ To move to another Home screen, keep touching the icon and drag it to left or right. Deleting an icon from the Home screen 1 From the Home screen, touch and hold an icon you want to delete. 2 Drag to "Back to apps list"/ "Remove from Home".
Changing wallpaper 1 Touch and hold an area of the Home screen where no icons are displayed. 2 3 [Change wallpaper]. Tap a wallpaper you want to change. ･ 4 Tap [See more wallpapers] to select from "Album", "Photos", "Live Wallpapers", or "Xperia™". ❖Information Alternatively, pinch-in on the Home screen to display the home screen list. ･ Up to 7 home screen can be set. ･ To return to the Home screen, tap h or b, or pinch-out.
f Current position in the list screen ･ Display by application icon/widget list. ❖Information To close the application screen, tap b or h, or flick up the Home screen display area at the bottom of the screen. ･ ❖Information You can disable some applications or widgets which cannot be uninstalled by dragging to "Disable app" in Step 2 (P.163). ･ Moving application in the application icon list Customizing the application screen 1 On the application screen, touch and hold an icon to move.
Display all apps It is a function to search where an application is located. 1 1 From the Home screen, u u[Display all apps]. ･ 2 Backing up the Home screen On the Home screen, u u[Layout backup and Restore]. ･ All applications are displayed in a list. Tap an application. ･ The screen such as the Home screen, application list, or the folder where the tapped application icon is located appears. The application icon is selected in the screen.
Backup settings 1 2 On the Home screen, u u[Layout backup and Restore]. . Backup automatically Multi-Device Sync Sync on Wi-Fi only Sync while Roaming Delete backup data Open source licenses Terms of use Help About Set whether to periodically back up the home screen information for the docomo LIVE UX. Set whether to send a notification to your other devices when an application has been installed. Set whether to back up or sync data only when the terminal is connected via Wi-Fi.
Changing My Magazine use setting 1 From the Home screen, u u[My Magazine settings]u[My Magazine use setting]. 2 [Use]/[Not use]u[OK]. ❖Information ･ You can also set by tapping on the application screenu[My Magazine use setting]. Checking Home application information 1 On the application screen, u[About].
Phone Making/Receiving a call Making a call/video call 1 2 3 From the Home screen, u"Dial" tab. Enter a phone numberu . To make a video call, enter a phone numberu uTap [Video call]. ･ Tap to delete the number. ･ When the call is finished, ･ . To end a video call, tap the screenuTap . ❖Information In Step 2, tap without entering a phone number to enter the phone number registered as the latest call in Recent calls. ･ To activate Xperia™ phone application, from the Home screen, tap u[Dial].
Emergency call Emergency call Police call Fire and emergency rescue Coast guard Phone number 110 119 118 in a stationary position to prevent the call from being dropped. Do not power off the terminal for at least 10 minutes after the emergency call just in case the Police or Fire/Ambulance may have to get in contact with you. ･ Note that you may not connect to the local Fire Department or Police Station depending on where you are calling from.
■ Using 2-second pause (,) Added number will automatically be sent approximately 2 seconds after the call is made. u"Dial" 1 From the Home screen, tab. 2 Enter a phone numberu u[Add 2–sec pause]uEnter an additional numberu . 3 When the call is finished, ■ Using a wait (;) . Making an international call (WORLD CALL) For details on the WORLD CALL, refer to NTT DOCOMO website. ･ Send replacing "+" by an international access code. From the Home screen, tab.
Receiving a phone/video call When a phone or video call comes in, the incoming call screen appears. ･ If the backlight is on (except on the lock screen) or an application is running, a notification appears at the top of the screen (P.79). ･ 1 On the incoming call screen, drag (left) to (right). ･ 2 To accept a video call, drag (left) to (right). To answer a call with voice only, drag (left) for "Voice only" to (right). When the call is finished, .
Muting the ringtone for an incoming call 1 While receiving a call, press the volume key or P. ❖Information ❖Information ･ To edit existing message, from the Home screen, tap u u[Call settings]u[Reject call with message]uSelect an existing message and edit itu[OK] in advance.
Operations during a call ■ While on a video call, you will see the other party's image in a parent window, and your image in a child window, with the operation area hidden. Tap the screen to show the operation area. On the Calling screen, you can set speakerphone or mute, or enter a phone number to make a call to another party.
i Video call : Switch from a voice call to a video call. ･ When you tap this icon, the other party will see a message asking for permission to switch to a video call. If the other party accepts it, you can switch to a video call. ･ If the other party has declined to switch to a video call, is outside a Xi service area, or is using a terminal that does not support VoLTE, a message appears indicating that the call cannot be switched. Tap [OK] to continue the voice call.
h Call history Incoming call and outgoing call are displayed by chronological order in the Recent calls screen. Up to 500 items can be displayed. Showing call history 1 ■ Adding a number from the Recent calls to Phonebook 1 uTap From the Home screen, "Recent calls" tab. History ･ The details of an incoming or outgoing call (Outgoing, Incoming, or Missed call) are displayed. From the Home screen, uTap "Recent calls" tabuTap a phone numberu[Register].
❖Information To delete all the entries in the call log, on the Recent calls screen, tap the "All" tabu u[Delete log]uMark "Select all"u[Delete]uTap [Delete]. ･ Voice and video calls are not distinguished in the call log. Answering Machine ･ Displaying missed calls When you have missed calls, the status bar. 1 2 appears in Drag the status bar downwards. [Missed call]. ･ If an application selection screen is displayed, select the application you want to use, then tap [JUST ONCE]/ [ALWAYS].
To delete recorded message, touch and hold a messageuTap [Delete]/[Delete All]u[OK]. ･ The number of messages that can be stored depends on the amount of available memory on your terminal. ･ Call settings You can set the network services, register call rejection or edit Reject call with message. 1 2 From the Home screen, [Call settings]. u . Network Voice mail Record caller's message service service*1 when you cannot answer an incoming call.
Set whether to reject incoming calls for numbers not in the phonebook, private, pay phone and unknown. Reject call with Edit/set a message (SMS) to message be sent when rejecting an incoming call (P.79). Sub address settings Set whether " " in phone number is identified as a sub address separator. Prefix settings Register a prefix number added before phone number when making a call. Equalizer Adjust sound quality during a call. Slow talk Slow the caller’s talking speed to make the call to be heard slowly.
■ k Phonebook list screen On the phonebook list screen, you can view details of your contacts. You can add a photo or image to a phonebook entry, and display phonebook entries by group. a d bc Index ･ Display the index character to search entries in the order of Japanese syllabary, alphabet, etc. Managing phonebook Adding a new phonebook entry i e f j g h k 1 From the Home screen, [ ドコモクラ ウド (docomo cloud)]u [docomo phonebook]uTap "Contacts" tabu[Register].
Making a call using the phonebook 1 From the Home screen, [ ドコモクラ ウド (docomo cloud)]u [docomo phonebook]uTap "Contacts" tabuSelect a Registering a phonebook entry to Favorites 1 phonebook entry you want to make a call to. 2 On the Profile screen, tap a phone number. 3 [Call]/[Video call].
Using optional menu 1 ■ From the Home screen, [ ドコモクラ ウド (docomo cloud)]u[docomo phonebook]u"Contacts" tabuTap on the contacts list screen/ profile screen. Phonebook list screen Select and delete several/all phonebook entries. Cloud menu*1 Display cloud menu. Import/Export P.89 Settings International use Set for using docomo setting for docomo phonebook overseas. phonebook docomo ID/Wi-Fi Set for using docomo settings services via Wi-Fi. Contacts display Set display order of order phonebook entries.
Creating a new group in the phonebook 1 From the Home screen, [ ドコモクラ ウド (docomo cloud)]u[docomo phonebook]uTap "Group" tab. 2 3 [Add group]. On the group adding screen, enter account, group name, icon, coloru[OK]. ･ The items vary depending on the account type. ❖Information Groups in docomo account can be sorted. To do so, tap [Sort] in Step 2 and follow the onscreen instructions. ･ Groups in docomo account can be edited/deleted.
Mail/Web browser docomo mail Message (SMS) Send/receive mails using DOCOMO mail address (@docomo.ne.jp). Pictograms and Deco-mail can be used, and automatic reception also is supported. Sent/received mails are stored to the docomo mail server. Mails can be transferred readily in case the terminal is lost or you change the model. Also, with a docomo ID, you can use mail on your PC, tablet, and other devices. For details of docomo mail, refer to NTT DOCOMO website.
･ When the number of entered characters comes close to a limit, a number of enterable characters appears on the right of the text box. (Send). 5 ❖Information You can change default messaging application to Hangouts. From the Home screen, u[Settings]u[More]u[Default SMS app]u [Hangouts]. ･ You can also send/receive text messages to/from customers of overseas network operators. Refer to NTT DOCOMO website for details on the countries and overseas network operators that provide this service.
Deleting a message (SMS) 1 2 3 4 From the Home screen, u[Messaging]. Tap a sender/recipient whose messages (SMS) to delete. Touch and hold a message (SMS) to delete. [Delete message]u[DELETE]. ❖Information To delete several messages (SMS), in Step 3, u[Delete messages]uMark messages (SMS) you want to deleteu u[DELETE]. ･ Deleting messages (SMS) by sender/recipient 1 2 3 From the Home screen, u[Messaging]. Touch and hold a sender/recipient you want to delete. u[DELETE].
* With silent mode (without vibration) turned on, the terminal does not vibrate when receiving messages (SMS). 4 Configure necessary settingsu[NEXT]. ･ Email You can create a POP3 or IMAP compatible email account provided by general ISP (provider), or an Exchange ActiveSync account to send or receive email. You can set multiple Email accounts. 5 If a screen for selecting type of account appears, tap an email account type and follow the onscreen instructions to set.
Creating and sending email 1 2 3 From the Home screen, u[Email]. (Compose). Enter the email address of recipient. When you enter a name or email address in the email address field, contacts matched to the entered numbers or letters are listed. ･ To enter multiple email addresses directly, separate with a comma (,) and then enter the next email address. ･ To add Cc or Bcc recipients, uMark "Show Cc"/"Show Bcc". ･ 4 5 Enter a subject and message. [SEND].
Saving attachment file of email 1 2 3 From the Home screen, u[Email]. Tap an email with attached files. ･ When attached file is not loaded, tap [LOAD]. Tap [SAVE] of file you want to save. ･ Attached files will be saved in the "Download" folder on the internal storage. Deleting email 1 2 3 From the Home screen, u[Email]. Tap an email to delete. u[DELETE]. ❖Information ･ To delete more than one email, in Step 2, touch and hold the emails you want to deleteuMark themu uTap [DELETE].
Changing Email account settings 1 2 3 General Account settings name Your name From the Home screen, u[Email]. u[Settings]. Tap an Email account you want to change the settings for. Incoming settings Outgoing settings Notification Configure Status bar notification, Notification sound, Vibrate*1, and Notification light settings. Sync Check Set how often the Email settings frequency application checks for new emails.
･ The setting items displayed below the account in Step 3 affect the general settings for the "Email" application. Gmail You can use the email services provided by Google or by major Internet service providers (ISPs). ･ Set up your Google account (P.169) or email account by following the onscreen instructions, if you have not already done so. ･ If you do not synchronize Gmail after Google account is set, "Account not synced" screen appears. Follow the onscreen instructions.
Early Warning "Area Mail" It is a service with which you can receive earthquake early warning, etc. delivered by the Meteorological Agency. ･ Area Mail is a free service for which subscription is not required. ･ Area Mail cannot be received in the following case.
❖Information Up to 50 messages can be saved. If savable amount of Area Mail exceeds the limit of maximum, the oldest one is deleted in order. ･ ❖Information To set Emergency mode, from the Home screen, u[Disaster Kit]uTap (P.41). ･ Deleting Area Mail 1 From the Home screen, u[Disaster kit]. 2 3 [Early Warning "Area Mail"]. Mark Area Mail you want to deleteu[Delete]u[OK]. Setting Early Warning "Area Mail" 1 2 3 From the Home screen, u[Disaster kit]. [Early Warning "Area Mail"]. u[Settings].
4 Select a candidate or [ 実行 (Go)] on the software keyboard. To zoom-in/-out web pages, pinch-out/ -in or double-tap the screen. ･ To go back to the previous page, tap b. ･ ❖Information ･ To copy text on web page, touch and hold a text you want to copyuDrag or to select a range of text to copyuTap (Copy). Searching text for web page 1 2 1 From the Home screen, u u . Changing tabs 1 From the Home screen, u uTap a tab you want to display.
Managing bookmarks and history Checking history 1 You can check history, save bookmarks, etc. Bookmarking a web page 1 2 3 From the Home screen, uDisplay a web page u[Save to bookmarks]. Set a label etc.u[OK]. Opening a bookmark 1 2 From the Home screen, u u[Bookmarks]. Tap the bookmark you want to open. 2 From the Home screen, u u[Bookmarks]uTap "HISTORY" tab. Tap the date of visit, such as [Today] or [Yesterday], or [Most visited]uTap the desired history entry.
Apps dmenu In dmenu, you can easily access sites recommended by DOCOMO or convenient applications. 1 From the Home screen, [dmenu]. If an application selection screen is displayed, select the application you want to use, then tap [Always]/[Just once]. ･ Browser is activated, "dmenu" appears. ･ dmarket dmarket provides a variety of services, offering digital content, such as music, videos, and books, and giving you access to a shopping site, travel booking site, and other sites.
･ For details on how to purchase applications, return your purchases, request a refund, from the Home screen, [Play Store]uFlick right from the left edge of the screenuTap [Help & Feedback] to see Google Play Help. Installing an application 1 From the Home screen, [Play Store]. 2 Search applicationsuTap an application you want to install. Check the displayed contents carefully and follow the onscreen instructions.
Osaifu-Keitai This function allows you to use " おサイフケー タイ対応サービス (Osaifu-Keitai compatible service)" by which you can pay money or use coupon, etc. or " かざしてリンク対応サービス (Kazashite-Link compatible service)" by which you can access information by holding the terminal over a home electric appliances or smart poster. You can save electronic money and points to an IC card and a docomo nano UIM card.
Using "Osaifu-Keitai compatible service" 1 From the Home screen, u[Osaifu-Keitai]. ･ 2 Select a service you want to use from a service list. ･ 3 When using for the first time, on the initial setup screen, mark "Agree to the Osaifu-Keitai Usage Regulations"u[OK]. Download an application compatible with service site or service. ･ ･ ･ ･ Note that when you do not subscribe sp-mode, some functions of Osaifu-Keitai compatible service may not be available.
Notes on holding over the device Please note the following when holding the terminal over an IC card reader or NFC module equipped device. Locking Osaifu-Keitai function Use "NFC/Osaifu-Keitai lock" settings to restrict the use of Osaifu-Keitai function and related services. ･ NFC/Osaifu-Keitai lock is different from screen lock for the terminal, SIM card lock. 1 2 Bring the mark close to the device slowly, do not hit it strongly. ･ Hold the mark over the device at the center horizontally.
NFC NFC is an abbreviation for Near Field Communication and a short range wireless communication method of international standard defined by ISO (International Organization for Standardization). You can use a contactless IC card function, Reader/Writer function, P2P function, and others. ■ Tap & pay You can set whether to enable or disable Osaifu-Keitai compatible services or other services that you can use by hovering your terminal over an IC card reader.
ToruCa ToruCa application allows you to save coupons offered by your favorite shops and other useful information (ToruCa) to your terminal. You can obtain ToruCa in various ways—via email, download from the Web, Bluetooth, or IC tags. You can easily update your ToruCa. For details of ToruCa, refer to NTT DOCOMO website. ❖Information ･ ･ ･ ･ ･ For obtaining, displaying or updating ToruCa, a packet communication charge may be applied.
Using Mobacas Mobacas requires a separate pay-TV subscription to a Mobacas broadcast station. ･ You cannot receive and watch broadcasts without attaching the docomo nano UIM card to the terminal. ･ Mobacas is a broadcasting service provided in Japan. ･ To use storage-based broadcasting services or record videos, you must have enough memory on your terminal or microSD card. Using a Class 4 or higher microSD card is recommended (Storage can be selected).
Watching Mobacas Real Time 1 From the Home screen, [NOTTV]. 2 Tap a thumbnail of program/ content. ･ ･ NOTTV's home screen appears. When using this service for the first time, register your profile. ❖Information ･ ･ ･ ･ ･ ･ ･ When watching Real Time program, you can select channels by flicking the screen left or right. If the "Auto-rotate screen" option is enabled, you can rotate your terminal to landscape orientation to switch to full-screen viewing.
Searching for a program/ content Searching from program table (Real Time) 1 2 From the Home screen, [NOTTV]. [ 番組表 (Program guide)]. ･ Tap a current broadcasting program to switch to a watching screen of selected program. Reserving a program/content Reserving watching/recording Real Time programs 1 2 3 Searching by conditions 1 2 3 ❖Information ･ You can save your entered keyword after searching (keyword reservation).
Reserving Shift Time/NOTTV Books reception 1 2 From the Home screen, [NOTTV]. [ シフトタイム (Shift Time)]/[NOTTV ブックス (NOTTV Books)]u[ 予定表 (Schedule list)]. Data may be complemented automatically using packet communication when contents are not completely received because of the reception status of broadcast wave etc. ( 自動補完 (Auto complement)). ･ You can disable the auto complement. ･ Setting Mobacas 3 Tap a program/content you want to reserve. You can set for view, audio, content reception, etc.
番組表 (Program table) 番組表情報自動 取得 (Auto acquisition of program table) ステータス 新着情報表示 バー (Status (New arrival bar) display) おすすめ表示 (Recommendation display) おすすめ設定 (Recommendation settings) ペアレンタ ルコント ロール (Parental control) 視聴年齢制限 (Age restriction for watching) 年齢設定 (Age Set time for automatically acquiring programs table. Set whether to have the status bar display information for new arrivals related to the programs and content reserved for recording/ reception.
詳細設定 Set whether to automatically display the program guide in real time, for example, when activating the application. Change the format in 表示形式変更 which programs and (Change display format) content are displayed. Set whether to prevent 重複録画防止 from recording the (Prevent same contents for duplicative schedule by series/ recording) keyword. 重複録画削除サ Check if the same ポート (Support program is recorded when deleting from deleting the list of recorded duplicative programs.
There are 2 types of information displayed in the data broadcasting area: "Data broadcasting" and "Data broadcasting site". "Data broadcasting" is displayed using airwave along with images and sounds; while "Data broadcasting site" is displayed by connecting to a site provided by TV broadcasting enterprises (stations), etc., using information of data broadcasting. For viewing "Data broadcasting site", etc., packet communication fees are charged. Some sites require information fees.
･ abcd e l f g j h i m k TV watching screen (Full seg, with Data broadcasting) a b c d e f g h Full seg/1Seg switching icon Data broadcasting icon Remote control button Option menu Broadcasting service in watching (Full seg/1Seg) Image Subtitle Channel, broadcasting station and program information i Reception signal level j Record icon k Channel selection key ･ Touch and hold / to search available channels.
Setting TV You can set TV watching screen, data broadcasting and channel settings. Using optional menu Reserve recording/viewing TV program or make each setting. 1 2 From the Home screen, . u[TV]. Display a program guide (P.120). Display detailed information of the program currently watched. Program Display program information information of the channel currently watched. Recorded program list Display recorded program list (P.119).
5 [OK]. ❖Information ･ By touching and holding the area registered in Step 3, you can display details, set area information, refresh channels, rename area, and deleting settings. Changing numbers for TV remote Change TV remote number assigned to each broadcasting station. Each broadcasting station can be called up via the corresponding TV remote number. 1 2 3 From the Home screen, u[TV]. Touch and hold an image. Tap a broadcasting station to change the remote control numberuTouch and hold an image.
❖Information Recording TV 1 2 From the Home screen, . ･ To quit recording, tap To delete a recorded program, touch and hold the program you want to delete in Step 3u uTap [YES]. ･ To change the title of a program, touch and hold the program you want to rename in Step 3u uEnter a titleuTap [OK]. ･ Tap in Step 3 to set the playback mode and see the amount of available memory. ･ Record images, sound, captions or data broadcasting while displaying. ･ Data broadcasts can be recorded only in 1Seg mode.
❖Information Using program guide 1 2 ･ You can return to the Home screen and perform other operations while listening to the FM radio in the background. To return to the FM radio screen, from the Home screen, u[FM radio], or drag the status bar downwardsu[FM radio]. ･ If you cannot receive Japanese FM radio programs because the docomo nano UIM card is not inserted etc., from the Home screen, tap u[FM radio]u u[Set radio region]u[Japan]. Before using FM radio, check your area.
Existing FM radio 1 On the FM radio screen, Camera Take still pictures and record video clips. Shooting is available in the portrait and landscape screen. For shooting with Sweep Panorama, always hold the camera horizontally. Before using the camera All still pictures or videos that you capture on the terminal are stored into the internal storage or a microSD card. When saving to a microSD card, attach a microSD card before using the camera.
❖Information Alternatively, from the Home screen, u[Camera] to activate the camera. ･ If a microSD card is installed, you can specify the card as the location where your terminal saves photos and videos you take (P.130). ･ The camera turns off if you do not touch the shooting screen for about 3 minutes (or about 30 seconds if you have turned on the camera in "Quick launch" mode).
Changing capturing mode 1 Press and hold k for over a second. 2 Tap the capturing mode iconuSelect capturing mode. Superior auto Shoot still pictures or videos with automatically optimized settings. Your terminal detects that the camera is moving ( ) or staying still ( ) or that your subject is moving ( ), recognizes the scene, and automatically configures optimal settings before shooting. Manual Change settings for shooting still pictures or videos manually.
❖Information ･ ･ ･ ･ ･ ･ Press and hold k for over a seconduTap the capturing mode iconuTap the [+Apps]/ [DOWNLOADABLE] tab to download the camera application and add it to the capturing mode. Applications downloaded via "AR fun", "AR effect", "Evernote", and "+Apps" will be saved on your internal storage. Some applications may not be able to play back sound from images taken using the "Sound Photo" feature.
If brightness, color balance, focus point of whole image, etc. to be shot with Sweep Panorama are extremely different from those of the focused image, image may not be shot properly. ･ In the following cases, Sweep Panorama shooting may be interrupted. - Moved the camera too fast/too slow - When image is too blurred - Moved the camera in the opposite direction of the shooting ･ 3 Tap the shooting screen. ■ Shooting with the camera key Press and hold k for over a 1 second.
2 Tap the shutter icon ( start/stop shooting. / ) to When the capturing mode is set to "Manual", tap to display the video shooting screen, then tap the start shooting icon ( ). ･ Tap the pause/start shooting icon ( / ) to pause/resume recording. ･ ■ 1 Press and hold k for over a second. 2 Tap the capturing mode icon, then select a capturing mode. ･ 4 When the capturing mode is set to "Manual", tap to display the video shooting screen. " tabuTap in "Touch capture" or drag it rightub.
When the capturing mode is set to "Sound Photo", images are shot at "8MP" (16:9). ･ When the capturing mode is set to "AR mask", "Face in picture", "AR fun", "Multi camera", "AR effect", or "Creative effect", images are shot at "2MP" (16:9). ･ Changing settings when shooting Changing settings from the option menu ･ The items displayed vary depending on the capturing mode. 1 ■ Press and hold k for over a second. uAny of " " tab/" " tab/" tabuSelect a setting item. 3 Change the setting.
■ Focus mode Set focus controls. Single autofocus The camera automatically focuses on the center of the shooting screen. Multi autofocus (only for still picture) The camera automatically focuses on several points on the shooting screen. For places which are focused on by tapping the shutter icon ( ) or shooting screen, or pressing k, the auto focus frame turns from white to blue. Face detection Detect several faces to focus (P.133).
■ Recording file type (only for video) ■ Select "H.264" or "H.265" as the file format when shooting video using the "4K video" option. ■ Set whether to shoot continuously by touching and holding the shutter icon ( ) or by pressing and holding k for over a second. You can set this feature when the capturing mode is set to "Superior auto" or when using the front camera with the capturing mode set to "Manual".
■ Geotagging Set whether to tag still pictures/videos location information (geotag) for the shooting spot. ･ When enabled, location information is added when appears on the shooting screen. ･ appears while acquiring location information. To pictures shot while acquiring location information, geotags are not added. ■ Touch capture Set whether to shoot by taping the shooting screen. ■ Use Volume key as Set function for assigning with the volume key.
■ Scene selection Select a shooting scene. Suitable shooting condition for the selected scene is set. Off Shoot without the scene set. Soft skin Shoot a picture making human skin look smoother. Soft snap Shoot a picture making human skin look bright and beautiful. Anti motion blur Reduce blur when taking portraits indoors. Landscape Shoot landscape depicting blue sky or plants with vivid color and focusing on distant objects.
Fireworks Shoot a crisp and clear images of fireworks. Due to long exposure time, be careful not to shake camera. ■ Exposure value (EV)/White balance Tap or drag the bar to adjust the exposure value. White balance is automatically adjusted depending on the light source. Auto Adjust to the light source automatically. Incandescent Adjust for lighting like incandescent bulb. Fluorescent Adjust for lighting like fluorescent. Daylight Adjust for a sunny place. Cloudy Adjust for a cloudy sky or shaded area.
Shooting with Face detection Shooting with Smile Shutter Focus on a face located away from the center. Shoot smile face. When the capturing mode is set to "Superior 1 Press and hold k for over a auto", face detection works automatically. second. 1 Press and hold k for over a second. 2 Tap the capturing mode iconu[Manual]. ･ To shooting videos, tap the video shooting screen. to display 3 uTap the " " tab/" " tabu[Focus mode]u[Face detection]ub. 4 Point the camera at the object.
f Album ❖Information Displaying photos/videos ■ Depending on the number of saved images, it may take some times to load images. ･ To zoom in/out images, pinch out/in on the image list screen. ･ View/play photos or videos. 1 4K video From the Home screen, [Album]. A list of images are displayed in chronological order. ･ When using this service for the first time, you will see its introduction screen. If you tap "SIGN UP"/"LOG IN", follow the onscreen instructions.
■ Photo viewing screen ･ Operating image files Video playback screen (P.137) a d bc 1 From the Home screen, [Album]uTap a photo/video. 2 Tap a screen. Upload to online service, send via Bluetooth or mail, copy/move to microSD card. Play slideshows, rotate image or make image settings, check detailed information about images, or add geotags. With "Throw", you can play photos and videos wirelessly on other devices. e f g a b c d Return to the image list Sharing menu (P.135) Option menu (P.
YouTube YouTube is a free online video streaming service. You can play, search for and upload videos. ･ A packet communication charge is applied when downloading or uploading video content using mobile networks. Playing YouTube video 1 From the Home screen, [Google]u[YouTube]. ･ 2 If you do not set Google account, the Google account setting screen appears. Follow the onscreen instructions. Media Player Play back music and videos stored on the internal storage or a microSD card using Media Player.
■ ❖Information Music playback screen ･ a b d e f g h You can return to the Home screen to perform another operation while listening to music in the background. To return to the music playback screen, from the Home screen, tap u[Media Player], or drag the status bar downwardsuTap the name of song that is being played.
g Auto-rotate screen ON/OFF ･ Tap to turn red and disable Auto-rotate screen. h Volume control ･ Alternatively, on the playback screen, press the volume key to adjust the volume. ❖Information ･ Tap the screen to display option menu icons and other items. Ending Media Player 1 On the Media Player screen/song player screen/movie player screen, / u[Exit]. Location services Your current location can be positioned using GPS, Wi-Fi, or mobile network.
You cannot use the terminal as a navigation device for an aircraft, vehicle, and person. Note that DOCOMO shall have no liabilities whatsoever even if you suffer damage or loss while performing a navigation using the location information. ･ You cannot use the terminal as a highaccuracy measurement GPS. Note that DOCOMO shall have no liabilities whatsoever even if you suffer damage or loss due to a deviation of the location information. ･ Global Positioning System (GPS) is created and managed by U.S.
Activating GPS/Location services You can position your current location using GPS, Wi-Fi, and information sent from mobile network base stations. 1 2 3 From the Home screen, u [Settings]. [Location]uTap of "Location" or drag it right. Read the Attention message about location information and tap [AGREE]uRead the Location consent message and tap [AGREE]. Finding the current location on the map You can detect your current location using location information service.
Searching for a location 1 From the Home screen, [Google]u[Maps]. 2 3 4 Fill out the search bar. on the software keyboard. Tap a destination. Schedule Displaying schedule 1 From the Home screen, [ ドコモクラ ウド (docomo cloud)]u[Schedule]. ･ When using for the first time, tap [ 同意 する (Agree)] on the 「スケジュール＆メ Displaying information モアプリ」ソフトウェア使用許諾規約 Display information such as traffic information etc. on the map. ("Schedule & Memo application" license agreement) screen.
Creating schedule event Setting display conditions in Schedule 1 From the Home screen, [ ドコモクラ ウド (docomo cloud)]u[Schedule]. When a search criteria is set, specified data can be displayed. 2 3 [Add]uEnter an item. [Save]. 1 From the Home screen, [ ドコモクラ ウド (docomo cloud)]u[Schedule]. 2 3 [Conditions]. ❖Information ･ When an alarm of event is set, appears on the status bar at the set time. Drag the status baruTap [It's time] to display details of the event.
❖Information ❖Information To delete alarms, in Step 2, tap u[Delete alarms] uMark alarms you want to deleteu[DELETE]*u[YES]. * A number of marked alarm is displayed at the right side of "DELETE". ･ Enabling/Disabling alarm 1 2 From the Home screen, u[Alarm & clock]. Tap / of alarm you want to switch ON/OFF or drag it right/left. Stopping alarm 1 While alarm is sounding, drag to the right. ❖Information If you tap [Snooze], the alarm sounds again when the set time has passed.
Backing up/Restoring to/from Data Storage BOX docomo backup With docomo backup, you can back up or restore data to/from " データ保管 BOX (Data Storage BOX)" or "microSD card". ･ Do not remove microSD card during backup or restoring. Doing so may damage the terminal data. ･ If the battery is low, backup or restore may not be done. In that case, charge the terminal and retry to back up or restore. ･ docomo apps password is required to back up or restore (P.164).
Restoring 1 2 3 From the Home screen, u[docomo backup]u[Backup/ restore to docomo cloud]. [Restore]. Tap [Select] on data type to restoreuMark data to restoreu [Select]. ･ 4 5 Tap [Select latest data] to select the latest data for each data type. [Add]/[Overwrite]u[Start restore] u[Restore]. Enter docomo apps passwordu[OK]. Backing up/Restoring to/from microSD card Back up or restore data such as phonebook entries, docomo mails, images/videos, etc. to an external memory such as microSD card.
Restoring 1 2 3 From the Home screen, u[docomo backup]u[Backup/ restore to microSD]. [Restore]. Tap [Select] on data type to restoreuMark data to restoreu [Select]. ･ 4 5 Tap [Select latest data] to select the latest data for each data type. [Overwrite]/[Add]u[Start restore] u[Restore]. Enter docomo apps passwordu[OK]. Copying phonebook entries registered in Google account to docomo account You can copy contacts data registered in Google account to docomo account.
Settings Viewing the setting menu 1 u From the Home screen, [Settings]. Wireless & networks Device Personal System P.147 P.157 P.164 P.173 Wireless & networks Wi-Fi Bluetooth Data usage Xperia™ Connectivity More Airplane mode Default SMS app Tethering & portable hotspot VPN Mobile networks NFC / Osaifu-Keitai settings P.147 P.179 P.151 P.152 P.153 P.91 P.154 P.156 P.153, P.189 P.104, P.
Turning on Wi-Fi 1 2 From the Home screen, u[Settings]u[Wi-Fi]. Tap or drag it right. ･ It may take a few seconds before the Wi-Fi connection is on. ❖Information Even when Wi-Fi is on, packet communication is available. ･ When a Wi-Fi network is disconnected, connection is automatically switched to a LTE/3G/GSM network mode. Note that packet communication charge may be applied if network connection stays switched.
Adding a Wi-Fi network manually ･ Turn Wi-Fi on beforehand (P.148). 1 2 3 From the Home screen, u[Settings]u[Wi-Fi]. u[Add network]uEnter a network SSID for Wi-Fi network to add. Tap "Security" setting itemuTap a security type of the Wi-Fi network you want to add. ･ 4 options, "None", "WEP", "WPA/WPA2 PSK", or "802.1x EAP", appear. 4 If required, enter security information for the Wi-Fi network you want to add. 5 [SAVE].
Advanced Keep Wi-Fi on during sleep Install certificates Wi-Fi Direct WPS Push Button WPS PIN Entry Auto IP support Passpoint MAC address IP address Set whether to disable the Wi-Fi function when the screen backlight turns off. You can set to turn on every time for charging the battery, too. ･ By default, "Keep WiFi on during sleep" is set. When not charging the battery, Wi-Fi connection is disconnected in approximately 15 minutes after the backlight turns off. Install certificates.
Data usage Enable/disable mobile data communication or set data usage limit. Enabling mobile data communication 1 2 3 From the Home screen, u[Settings]u[Data usage]. Tap of "Mobile data traffic" or drag it right. Read the note and tap [OK]. Setting data usage limit 1 2 3 From the Home screen, u[Settings]u[Data usage]. Tap of "Set mobile data limit" or drag it right. Setting Data usage cycle 1 2 From the Home screen, u[Settings]u[Data usage]. Set period/[Change cycle...].
Xperia™ Connectivity One-touch setup Smart Connect™ Throw settings Screen mirroring* Cast screen Media server settings Set up for using the terminal and Xperia™ tablet (Android 4.4 or later) at the same time with one-touch operation. Set operation when external device is connected or applications are activating/ deactivating. Play contents in the terminal with other device. Connect to a TV or tablet compatible with Screen mirroring to display the screen on the terminal.
Set whether to display the software installation wizard when connected to a PC. Detect USB Have USB device peripheral connected to the terminal recognized. Tips for Check how to connect connection USB device. with USB peripheral Keep your device's screen Set whether to light on the terminal backlight while an external device is connected. USB Connectivity Install software * Compatible with Wi-Fi CERTIFIED Miracast™ Depending on usage environment, image or sound may be interrupted or stopped.
Setting an access point additionally 1 2 3 4 5 6 From the Home screen, u[Settings]u[More]u[Mobile networks]u[Access Point Names]. . [Name]uEnter a nameu[OK]. [APN]uEnter an access point nameu[OK]. Tap and enter all other information required by your network operator. u[Save]. ❖Information ･ Do not change the MCC/MNC when setting the APN. If you change them to values other than the default values (440/10), the set APN will not be displayed on the APN screen.
Setting USB tethering 1 2 From the Home screen, u[Settings]u[More]u [Tethering & portable hotspot]. Connect the terminal to the PC with a USB compatible PC with Micro USB Cable 01 (optional) etc. (P.35). When you connect microUSB cable etc. for the first time, the driver software for the terminal is installed to a PC. Wait for a while until installation is completed. ･ When "Install software" screen appears on the terminal, tap [SKIP]. ･ 3 Tap of "USB tethering" or drag it right.
4 Tap "Security" setting itemuTap a security type of the Wi-Fi access point you want to set. 5 Enter a password of the Wi-Fi access point to set as required. 6 [SAVE]. ❖Information ･ By default, a password is set in a random manner. Setting Bluetooth tethering Up to 5 Bluetooth devices can be connected to the Internet. 1 2 From the Home screen, u[Settings]u[More]u [Tethering & portable hotspot]. Tap of "Bluetooth tethering" or drag it right.
❖Information To edit/delete VPNs, touch and hold a VPNu[Edit profile]/[Delete profile]. ･ When you reset after VPN has been used, mark "Erase internal storage". ･ Connecting to a VPN 1 2 3 From the Home screen, u[Settings]u[More]u[VPN]. Tap a VPN to connect to. Enter required authentication informationu[CONNECT]. ･ When you are connected to a VPN, appears in the status bar. Disconnecting a VPN 1 2 From the Home screen, u[Settings]u[More]u[VPN]. Tap a connected VPNu[FORGET].
Change the home application for the terminal. ･ If you change the Home application, the lock screen, phonebook application and application for playing videos or music are also changed. Simple Home Xperia™ Home docomo LIVE UX P.49 P.46 P.68 Display Image enhancement Increase touch sensitivity to enable touch operation with gloved hand ･ Touching screen with gloved hand with Glove mode ON, a ring appears where you touch on the screen. ･ Depending on the material of gloves, touch operation may be difficult.
Adjusting the white balance 1 2 From the Home screen, u[Settings]u[Display]u[White balance]. Tap or drag the slider to the right or left on the position to set. ･ 3 Touch and hold the area displaying "Press and hold here to see previous setting" to check the setting before adjusting. [DONE]. ❖Information ･ In Step 2, u[Default values]u[DONE] to reset back to the default setting. Sound & notification The sound setting for music recommended by Sony.
Also vibrate for calls Phone ringtone Increasing ringtone* Default notification ringtone Startup sound Other sounds Notification light Interruptions When device is locked App notifications Notification access Set whether to vibrate the terminal when receiving a call. P.160 Set whether to have your ringtone get gradually louder. P.160 Set whether to emit sound when the power is on. Set Dialpad tones/ Screen locking sounds/ Touch sounds/Vibrate on touch. Set whether to notify missed call etc.
❖Information To set a ringtone or notification sound other than the ones stored by default, tap . ･ When the Media volume is set to volume 0, ringtone or notification sound cannot be heard. ･ Storage Check or format memory volume of device memory (internal storage), microSD card, and USB storage. Check available memory space of internal storage, etc. SD Card Total space Check available memory space etc. of microSD card. Unmount SD Cancel connection of card*1 microSD card to remove it safely.
Power management Restrict functions in sleep mode for specified applications to reduce battery consumption. Low battery mode Set time before going into sleep mode, screen brightness, and whether to turn off functions when the battery level becomes lower than set level. Emergency mode P.41 App power Reduce battery consumption by consumption controlling the operation of unused applications. Battery usage Display remaining battery level, battery consumption,etc.
Deleting an application ･ Before deleting application data, back up contents that you want to save including data saved in the application. 1 2 3 From the Home screen, u[Settings]u[Apps]. Tap an application to delete. [UNINSTALL]u[OK]. ❖Information Some applications pre-installed cannot be deleted (uninstalled). For some applications which cannot be uninstalled, disabling is possible (P.163). ･ Applications downloaded from Google Play are recommended to be deleted from the Google Play screen (P.103).
Personal docomo service/cloud Location Security Accounts Language & input Backup & reset Setup guide P.164 P.165 P.165 P.169 P.171 P.172 P.37 docomo service/cloud docomo ID 設定 (docomo ID setting) docomo cloud Set docomo ID for using docomo applications. Make settings for docomo cloud compatible service. docomo apps Manage to install applications management provided by NTT DOCOMO and set to check updates for applications regularly. docomo apps Set a password for applications password provided by docomo.
Owner info Location 1 2 3 From the Home screen, u[Settings]u[Location]. Tap or drag it right. Read the note and tap [AGREE]. ･ When a confirmation screen for improving location accuracy appears, read the content and then tap [AGREE] or [DISAGREE]. Set a mode to identify location information. Recent location Display the application using the requests recent location information data and battery usage amount. Location Set whether to allow applications services to access the location information.
Install from device Install encrypted certificates. memory/SD card Clear credentials Clear all certificates or credential information from the credential storage.*3*4 Trust agents Set whether to display trusted agents or disable it. Screen pinning Set whether to enable screen pinning. When it is set to On, a pinned screen cannot be moved. Apps with usage Set whether to enable access applications that read the usage history. *1 Displayed items vary depending on "Screen lock" settings.
･ ■ The PUK code is written on the subscription form (copy for customer) handed at the subscription in the docomo Shop. If you subscribed other than docomo Shop, you must bring your official identification (such as driver's license), the docomo nano UIM card with you to the nearest docomo Shop or contact the "General Inquiries" on the last page.
■ Personal Unblocking Key (PUK code) The PUK code is an 8-digit number for canceling the locked PIN code. The PUK code cannot be changed by yourself. ･ If you failed to enter PUK code 10 times consecutively, the docomo nano UIM card is locked. Please contact a docomo Shop. Enabling SIM card lock By entering PIN code when powered on, you can protect from improper use. 1 2 From the Home screen, u[Settings]u[Security]u[Set up SIM card lock]u[Lock SIM card]. Enter PIN codeu[OK].
2 Tap a unlock method to set. ･ When you tap [PIN], follow the onscreen instructions to enter 4 - 16 digit numbers. This "PIN" code is different from one to be set on a docomo nano UIM card (P.167). Locking the screen When P is pressed to turn on the sleep mode or the screen backlight automatically goes off after screen unlock method (P.168) is set, the screen is locked. ■ 1 ■ 1 To unlock the screen When the screen is locked, press P to turn the backlight onuEnter the unlock method.
Setting other account 1 2 From the Home screen, u [Settings]u[Accounts]u[Add account]. Tap an account type. ･ Configuring sync settings for your accounts ■ Synchronize information of online service with the terminal. You can display and edit information on the terminal or a PC. ･ Setting Auto-sync data, communication occurs to synchronize and a packet communication charge may be applied. After this step, follow the onscreen instructions.
Language & input Language Current Keyboard Xperia™ Chinese keyboard Xperia™ keyboard Google voice typing Moji-Henshu Xperia™ Japanese keyboard Spell checker* Personal dictionary Voice input Text-to-speech output Pointer speed Change phone language. Select a keyboard. P.67 Setting voice input 1 2 From the Home screen, u[Settings]u[Language & input]u[Voice input]. for "Enhanced Google services" or "Basic Google recognition". Languages Set whether to run the spell checker.
Setting Text-to-speech output 1 From the Home screen, u[Settings]u[Language & input]u[Text-to-speech output]. Google Textto-speech Engine Speech rate Listen to an example Default language status Set language for text-to speech and audio synthesis engine to read out text. Set speed at reading out text. Playback sample of audio synthesis. Display languages supporting textto-speech.
Accessibility System Date & time Accessibility Printing About phone P.173 P.173 P.174 P.174 Date & time ･ To set date/time or time zone manually, turn off "Automatic date & time" or "Automatic time zone" in advance. Adjust date and time automatically by using network-provided information. Automatic time zone Adjust time zone automatically by using network-provided information. Set date Set date manually. Set time Set time manually. Select time zone Set time zone manually.
Color correction*1 Color is corrected when distinguishing red from green is difficult. *1 It may not work correctly. *2 When the terminal goes into sleep mode during a call with "Power button ends call" ON, press Volume key to return from the sleep mode. *3 To activate accessibility function, press and hold P until the sound is emitted or the terminal vibratesuKeep touching with two fingers until a confirmation sound is emitted.
File management Storage structure Phone (internal storage) Folders in the internal storage by default are as follows. ･ Displayed folders may differ depending on the terminal operations. Stores alarm sounds etc. Stores setting data for system or each application, temporary files, etc. DCIM Stores still pictures/videos shot by Camera. DeviceConfig Used by SONY configuration tool. Download Stores downloaded data through Browser. Movies Stores videos (except shots by Camera). Music Stores music data.
Inserting microSD card ･ Opening/closing docomo nano UIM card/ microSD card slot cover (P.23). 1 Open the docomo nano UIM card/ microSD card slot cover, then hook your fingertip on the projection part of the tray ( ) to pull the tray straight out and remove it from the terminal. 3 2 Close the docomo nano UIM card/ microSD card slot cover, firmly press parts and make sure that there are no gaps between the terminal and cover.
Removing microSD card Make sure to unmount microSD card (make reading/writing unavailable) before removing. ･ Opening/closing docomo nano UIM card/ microSD card slot cover (P.23). 1 From the Home screen, u[Settings]u[Storage]u [Unmount SD card]u[OK]. ･ When microSD card is unmounted, appears in the status bar and notify that microSD card is not available for reading or writing.
Moving/Copying folder or file File operation Use "File Commander" application to operate various data saved in the internal storage or the microSD card. 1 From the Home screen, Commander]. u[File The home screen for File Commander is displayed. Flick right from the left edge of the screen to display the option menu. ･ When a microSD card is inserted, "SD Card" appears on the home screen and the option menu. ･ 2 3 Select an itemuTap a folder as required. Tap a file.
･ Data communication Bluetooth function Bluetooth function is a technology which enables to connect with Bluetooth device such as PC, handsfree headset wirelessly. ･ The terminal does not communicate wirelessly with all types of Bluetooth devices. ･ Supported Bluetooth profiles (P.212) ❖Information If you turn off the terminal with Bluetooth turned on, Bluetooth function turns off. When you turn on the terminal again, Bluetooth function turns on automatically.
Making pair setting for the terminal and Bluetooth device To connect the terminal and Bluetooth device, pair them first. ･ Once paired, the setting with the Bluetooth device is saved. ･ For make pair setting, entering passcode (PIN) may be required. Passcode (PIN) of the terminal is "0000". If you cannot make pair setting when you enter "0000", see the documentation of your Bluetooth device. From the Home screen, u[Settings]u[Bluetooth].
Sending/Receiving data via Bluetooth function Turn on Bluetooth function in advance, then pair with Bluetooth devices. NFC communication You can send/receive data to/from a device with NFC such as a mobile phone. Sending data via Bluetooth function 1 [Bluetooth] from the sharing menu of each application. 2 Tap the other party's Bluetooth device. Receiving data 1 Send data from a Bluetooth device. ･ 2 appears on the status bar. Drag the status bar downwardsu [Bluetooth: Incoming file]u [ACCEPT].
If the License agreement screen appears when sending/receiving data, read the content and follow the onscreen instructions. ･ When pointing marks to each other, sending/receiving may fail. In such case, operate again to send/receive. ･ The terminal does not communicate with all NFC devices. ･ For notes when holding over the other device, (P.106).
Receiving data 1 Perform data sending operation on a sender's terminal. 2 Face the marks on the terminal and the receiver’s terminal each other. ･ When you receive data, appears on the status bar. Drag the status bar downwardsuTap [Beam complete] to launch the application associated with the received data. Follow the onscreen instructions. Selecting NFC Type 1 2 3 From the Home screen, u[Settings]u[More]. [NFC/Osaifu-Keitai settings]u[NFC Type].
External device connection Connecting to PC 1 When you connect microUSB cable for the first time, the driver software for the terminal is installed to a PC. Wait for a while until installation is completed. ･ When "Install software" screen appears on the terminal, tap [SKIP] or [CANCEL]. ･ Connect a PC to exchange data between the internal storage or the microSD card and a PC. ❖Information Appeared screen may vary depending on the operating system (OS) of a PC.
Connecting DLNA device Using Wi-Fi function, you can share media files with other client (DLNA : Digital Living Network Alliance) devices. ･ Set up a connection (P.148) in advance using the same Wi-Fi network as for the other DLNA devices. 4 ･ ･ 5 Setting Media server 1 From the Home screen, u [Settings]u[Xperia™ Connectivity]u[Media server settings]. 2 Tap of "Share media", or drag it right. appears on the status bar.
Playing a media file in the terminal with a DLNA device You can play a media file in the terminal with a DLNA device using Throw function. 1 From the Home screen, [Music]/ [Album]/[Video]. 2 Tap a file you want to playu u [Throw]. Tap a device on the device list.
International roaming Overview of International roaming (WORLD WING) With the international roaming (WORLD WING), you can use the terminal without changing phone number or mail address in the service area of the overseas network operator affiliated with DOCOMO. You do not need to change the settings of call and SMS. ■ Supporting networks The terminal is Class 5. The terminal works in LTE network, 3G network and GSM/GPRS network service area.
Before using overseas Before leaving Japan To use the terminal overseas, check the following in Japan. ■ Subscription ･ ■ Charging ･ ■ Check if you subscribe WORLD WING. For details, contact "General Inquiries" on the last page. For charging, refer to NTT DOCOMO website. Usage charge Overseas usage charges (call and packet communication) differ from those in Japan. For details, refer to NTT DOCOMO website. ･ Some applications perform communication automatically.
Settings for overseas use Setting data roaming To perform packet communication overseas, setting "Data roaming" to ON in Mobile networks is required. 1 2 From the Home screen, u[Settings]u[More]u[Mobile networks]. Tap of “Data roaming”, or drag it rightuRead the notes and tap [OK]. Setting a network operator By default, the terminal automatically searches available network and connect to it. To switch network manually, set as follows.
Correction of the time/time differences may not be performed correctly depending on the network of overseas network operator. In that case, set time zone manually. ･ Timing of correction varies by the overseas network operator. ･ Setting Date & time (P.173) ･ About inquiries For loss or theft of the terminal or docomo nano UIM card, immediately contact DOCOMO from the spot to take the necessary steps for suspending the use. For inquiries, refer to the last page.
2 Dial + (touch and hold [0])uEnter Country code, Area code (City code), a phone number in the order. If the area code begins with "0", omit "0". However, "0" may be required to dial to some country or area such as Italy. ･ To call an overseas "WORLD WING" user, enter "81" (Japan) for the country code. ･ 3 4 . ･ When "Auto conversion" in International dial assist is marked (P.193), the international dial assist screen appears when sending. To make a call to Japan, tap [Call].
❖Information ･ When you received a call during the international roaming, regardless of which country the call is from, it is forwarded internationally from Japan. A caller is charged for a call fee to Japan, and the receiver is charged for a reception fee. Making a call from the other party ■ Having someone make a call from Japan to the country you stay.
Setting International dialing assist 1 2 3 From the Home screen, u [Call settings]u[Roaming settings]. [International dial assist]. . Auto International prefix or country code is conversion automatically added. Country code [OK]uSelect a country code which will be used for auto conversion. International [OK]uSelect an international prefix prefix which will be used for auto conversion. Setting Network service (overseas) Set network service such as voice mail from overseas.
After returning to Japan When you return to Japan, the terminal is connected to DOCOMO network automatically. If connection is failed, perform the following operations. ･ Set "Preferred network type" to "LTE (preferred)/3G/GSM" (P.189). ･ Set "Search mode" to "Automatic" in "Service providers" (P.189).
Appendix/Index Troubleshooting Troubleshooting First, check if the software update is necessary for the terminal. If necessary, perform the software update (P.206, P.210). ･ When checking the following items not to improve the state, contact the phone number given in "Repairs" the last page of this manual (in Japanese only) or DOCOMO-specified repair office. ･ ■ Power supply Cannot power on the terminal. ･ Check if the battery is not run out. → P.31 Screen is frozen, the power cannot be turned off.
■ Terminal operation Become hot while operating/charging. ･ While calling, depending on the radio wave condition or call duration time, the terminal may become hot around the earpiece/speaker. This condition is not abnormal. ･ While operating or charging, or if you watch TV, record video, etc. for a long time while charging the battery, the terminal, internal battery or adapter may become hot. There is no problem about operation and continue to use it. The operation time provided by the battery is short.
The terminal operation is unstable. ･ Instability may be caused by applications that you installed after purchasing the terminal. If the symptom is improved when you boot the terminal in safe mode (near default state), uninstalling the installed application may improve the symptom. To boot the terminal in safe mode, press and hold P for over a second with the terminal OFF until XPERIA logo appears, and then touch and hold the volume down key.
Cannot call (Even when moving, does not disappear, or although radio waves are enough, making/receiving calls is unavailable.) ･ Turn the power OFF and ON, or remove and attach docomo nano UIM card. → P.29, P.36 ･ Due to the nature of radio waves, making/ receiving calls may be unavailable even when "not out of service area" or " appears on the display for the radio wave condition". Move to the other place and call again. ･ Check if you set call rejection. → P.84, P.
■ Camera Still pictures and video taken with the camera are blurred. ･ Check if clouds, dirt or film attach to the lens of camera. ･ Use "Superior auto" for the capturing mode. → P.123 ･ When the capturing mode is set to "Manual", you can focus on using Focus mode. → P.128 ･ Set Image stabilizer/SteadyShot™ and shoot. → P.129 ･ To shoot a portrait image, use "Face recognition". → P.133 Photo or video shot with flash is whitish.
Cannot perform data communication overseas. ･ Turn on "Data roaming". → P.189 The terminal suddenly became unavailable while using overseas. ･ Check if usage amount exceeds the limit of maximum charges for use. For use of "International roaming (WORLD WING)", the limit of maximum charges for use is set in advance. If exceeding the limit of maximum charges for use, pay the charges. Cannot receive calls overseas. ･ Is "Restricting incoming calls" set to "Activate restriction"? → P.
Calls cannot be made from the terminal connecting to external device such as car navigation or handsfree device. ･ If calls are made several times when the other party does not answer or is out of service, the call to this number may be disabled. In this case, turn terminal off and on. ■ External device connection An external device connected using microUSB cable or MHL cable is not recognized. ･ Remove the external device and then connect it again, then [Detect USB device]u[OK]. → P.
● All calls are restricted by access control. Appears when normal/emergency voice call service is hard to receive because communication lines are busy. ● Restricted access changed Appears when the voice service or data service is not received. ● SIM card is locked Enter your PIN code (P.167) correctly. ● SIM card is PUK-locked Enter your PUK (Personal Unblocking Key) (P.168) correctly. ● PIN lock disable code is locked. PIN lock disable code is locked. Please contact a docomo Shop.
2 From the Home screen, ･ 3 4 5 u[ 遠隔サ Warranty and After Sales Services ポート (Enkaku support)]. When you use for the first time, agree to " アプリケーション・プライバシーポリ シー (Application privacy policy" and " ソフトウェア使用許諾書 (License Agreement)". [ 遠隔サポートの接続画面に進む (Go to Enkaku support connection screen)]u[ 同意する (Agree)]. Enter connection number notified by DOCOMO. Enkaku support starts when you are connected. Warranty Make sure that the warranty is received with the terminal upon purchase.
* Data such as phonebook entries can be backed up by using docomo cloud. When requesting a repair, make sure to bring the warranty card with the terminal. Repair requests that are not accompanied by the warranty, that involve malfunction and damage due to incorrect handling by the owner (damage of headset jack, microUSB connection jack, liquid crystal, etc.
･ The terminal has been repaired by a repair office other than the DOCOMO specified one. * Even if repair is possible, it will be done at the owner's expense, as this type of corrosion or damage is not covered by the warranty. ■ If the warranty period expires We will repair the terminal at the owner's expense. ■ Parts stock period The functional parts necessary to repair the terminal will be basically available for a minimum of 4 years after the manufacture is discontinued.
● After the repair, Wi-Fi MAC address or Bluetooth address may be changed regardless of the repaired parts. ● Materials that generate magnetic fields are used in the following parts of the terminal. Do not hold an object that is easily affected by magnetism, such as a cash card, close to the terminal. You may not be able to use the card any more. Where they are used: Microphone/Speaker, Earpiece/Speaker ● The terminal is waterproof.
Notes When the software is updated, restoring the previous software is not possible. ･ When performing update, the private information concerning the terminal (model, serial number, etc.) is automatically sent to the server of DOCOMO. DOCOMO does not use the sent information for purposes except software update. ･ For using packet communication via FOMA/ Xi, communication charge is not applied for downloading.
If you start download via Wi-Fi, stay within the Wi-Fi area to complete downloading. When downloading is interrupted due to disconnection of Wi-Fi, "Download stopped. 【Reason】No Service" may appear on the screen even if the communication is available via Xi/FOMA. In that case, download again within Wi-Fi area. ･ If an update is not needed, "No upgrade is needed. Use it as it is." appears. ･ ･ When "Auto Update" is ON, perform operation of "When the icon does not appear in the status bar" (P.208).
2 After a message for installation start appears, the installation starts automatically in approximately 10 seconds. ･ Tap [OK] to start installation soon. Depending on update, a confirmation screen for performing update appears after [Start Update] is tapped. When the confirmation screen appears, operate the following steps. a Select a upgrading method. ･ "Perform now (only via Wi-Fi)" : Immediately download the update file via Wi-Fi connection.
･ Updating from Play Store From the Home screen, tap [Play Store]uFlick right from the left edge of the screenu[My apps] to check for updates of each application. ❖Information ･ For OS version support information on each application, contact the application provider. Connecting to a PC to upgrade Install a software for "Software update" beforehand. For methods of software installation, refer to the following website. http://www.sonymobile.co.
Continuous 1Seg watching time Continuous Mobacas watching time Display Type/ Colors Size Resolution Image pickup device Type Size Camera effective pixels Camera recorded pixels (Max.) Zoom Approx. 480 min. Still picture recording size Approx. 500 min. TFT (Triluminos® Display for Mobile) 16,777,216 colors Approx. 5.2 inches 1080 (H)u1920 (V) pixels (Full HD) Camera : Backsideillumination layered CMOS Front camera : Backsideilluminated CMOS Camera : 1/2.3 inches Front camera : 1/5.
Bluetooth Headset jack Version Radio power Available communication distance*2 Supported profile/ codec*3 Size Pole*4 4.1*1 power class 1 Within approx. 10 m HFP, HSP, OPP, SPP, HID, A2DP (LDAC/aptX/SBC), AVRCP, PBAP, PAN (PANNAP/PANU), HOGP, MAP, DID Diameter 3.5 mm 5-pole *1 It is confirmed that the terminal and all Bluetooth devices are compliant with Bluetooth standards designated by Bluetooth SIG, and they are authenticated.
■ TV/Mobacas antenna cable SO02 Size Weight ■ The terminal supports the display or playback of the following file formats: Still image* Video File format WAV (PCM, G.711) (.wav), AAC (.3gp, .m4a, .mp4), AAC+ (.3gp, .m4a, .mp4), eAAC+ (.3gp, .m4a, .mp4), MP3 (.mp3), AMR-NB (.3gp), AMR-WB (.3gp), MIDI (SP-MIDI/GM/ GML (.mid), XMF (.xmf ), Mobile XMF 1.0 (.mxmf ), RTTTL/RTX (.rtttl, .rtx), OTA (.ota), iMelody (.imy)), Ogg Vorbis (.ogg), FLAC (.flac), WMA (.wma), ALAC (.m4a), DSD (.dsf, .dff ), Opus (.
■ Time length of shooting video (Estimation) Per video : Up to approx. 157 min. In total : Up to approx. 157 min. Savable time of Per video : Up to approx. recording to a microSD 463 sec. card (1GB) In total : Up to approx. 463 sec. Savable time of recording to the internal storage * Time of recording with Video resolution of 1920u1080 (Full HD).
■ Text language (Character entry) Icelandic/Azerbaijani/Arabic/Albanian/ Armenian/Italian/Indonesian/AngloIndian/Ukrainian/Esthonian/Dutch/Kazakh/ Catalan/Galician/Greek/Kartuli/Croatian/ Javanese/Swedish/Spanish/Slovak/ Slovene/Sundanese/Serbian/Thai/Tagalog/ Tatar/Tamil/Czech/Danish/German/ Turkish/Norwegian/Basque/Hungarian/ Hindu/Finnish/French/Bulgarian/ Vietnamese/Hebrew word/Belarusan/ Persian/Polish/Bosnian/Portuguese/ Macedonian/Malay/Latvian/Lithuanian/ Romanian/Russian/English/Chinese (Tradition
End User Licence Agreement Software delivered with this device and its media is owned by Sony Mobile Communications Inc., and/or its affiliated companies and its suppliers and licensors. Sony Mobile grants you a non-exclusive limited license to use the Software solely in conjunction with the Device on which it is installed or delivered. Ownership of the Software is not sold, transferred or otherwise conveyed.
Export Controls and Regulations This product and its accessories may be covered and controlled by Japans export control regulations ("Foreign Exchange and Foreign Trade Law" and related laws and regulations) And, they are also under coverage of Export Administration Regulations of the U.S. When exporting and reexporting this product and its accessories, take necessary procedures on your responsibility and expense.
"FOMA", "i-mode", "i-Dppli", "Deco-mail", "spmode", "mopera U", "WORLD WING", "WORLD CALL", "ToruCa", "iD", "Xi", "LIVE UX", logo of "ToruCa", logo of "i-concier", logo of "dmenu" are trademarks or registered trademarks of NTT DOCOMO, INC. ･ "Bluetooth" is a registered trademark of Bluetooth SIG, Inc. and any use of such marks by Sony Mobile Communications is under license. ･ "NOTTV" and "NOTTV" logo are trademarks of mmbi, Inc.
is a registered trademark of FeliCa Networks, Inc. ･ FeliCa is a contactless IC card technology developed by Sony Corporation. ･ is a trademark or registered trademark of NFC Forum, Inc. in the US and other countries. ･ "Twitter" is a trademark or registered trademark of Twitter, Inc. ･ "Google" and "Google" logo, "Android", "Google Play", "Google+", "Gmail", "Google Maps", "Hangouts", "Google Calendar", "YouTube", "Google Chrome" are trademarks or registered trademarks of Google, Inc.
decline an upgrade, you will not be able to access content that requires the upgrade.
SIM unlock This terminal supports SIM unlock. If you release SIM lock, you can use SIM by a carrier other than NTT DOCOMO. ･ Available services and functions may be limited. DOCOMO is not liable to any failures or malfunctions. ･ For details of SIM unlock procedure, refer to NTT DOCOMO website. 1 2 3 Insert SIM card provided by other company. Power on the terminal. Enter SIM unlock code$u$[UNLOCK].
Index A Access point Initializing ･････････････････････････ 154 Setting････････････････････････････ 153 Accessibility ･････････････････････････ 173 Account Removing ･････････････････････････ 170 Accounts ････････････････････････････ 169 Adjusting sound volume ･･･････････････ 160 Airplane mode ･･･････････････････････ 153 Alarm & clock ････････････････････････ 142 Setting alarm ･･････････････････････ 142 Album ･･････････････････････････････ 134 Anshin Scan ･･････････････････････････ 55 Answering Machine ･････
Brightness level ･･････････････････････ 158 Browser ･･････････････････････････････ 99 Adding tab ････････････････････････ 100 Bookmark ･････････････････････････ 101 History ････････････････････････････ 101 Link ･･････････････････････････････ 100 Searching text･･････････････････････ 100 Settings ･･･････････････････････････ 100 C Calculator ････････････････････････････ 54 Calendar ･････････････････････････････ 53 Call･･････････････････････････････････ 75 Calling screen ･･･････････････････････ 80 Declining a
Contacts ･････････････････････････････ 53 D Data Storage Box ･･････････････････････ 55 Data usage ･･････････････････････････ 151 Date & time ･･････････････････････････ 173 Device ･･････････････････････････････ 157 Dial ･････････････････････････････････ 53 Disaster kit ･･･････････････････････････ 56 Display･･････････････････････････････ 158 dmarket･････････････････････････････ 102 dmenu ･･････････････････････････････ 102 docomo apps password ････････････････ 164 docomo backup ･･････････････････････ 144 doco
H Handwriting ･･････････････････････････ 64 Hangouts ････････････････････････････ 57 Home･･･････････････････････････････ 158 Home application docomo ････････････････････････････ 68 Switching ･･････････････････････････ 60 Xperia ･････････････････････････････ 46 Home screen ･･････････････････････････ 46 Adding (docomo LIVE UX) ･････････････ 70 Adding (Xperia Home) ････････････････ 47 Backup ････････････････････････････ 72 Deleting (docomo LIVE UX) ････････････ 70 Deleting (Xperia Home) ･･･････････････ 47 doco
Structure ･･････････････････････････ 175 Missed call････････････････････････････ 83 Mobacas ････････････････････････････ 108 Reserving ･････････････････････････ 111 Searching ･････････････････････････ 111 Settings ･･･････････････････････････ 112 TV/Mobacas antenna cable ･･･････････ 109 Watching ･･････････････････････････ 110 Moji-Henshu ･･････････････････････････ 67 Movie Creator ･････････････････････････ 53 Multi-tap input ････････････････････････ 65 Music ････････････････････････････････ 53 My Magazine ･･
Photo collection ･･･････････････････････ 55 Photos ･･･････････････････････････････ 57 PIN code ････････････････････････････ 167 Play Books ････････････････････････････ 57 Play Games ･･･････････････････････････ 57 Play Movies & TV･･･････････････････････ 57 Play Store ･･･････････････････････････ 102 Deleting ･･････････････････････････ 103 Installing ･･････････････････････････ 103 Playing video ････････････････････････ 136 PlayStation ･･･････････････････････････ 56 Portrait view ･･････････････････････････ 39 P
Status icon ･･･････････････････････････ 42 Stopwatch ･･･････････････････････････ 143 Storage Settings ･･･････････････････････････ 161 Structure ･･････････････････････････ 175 System･･････････････････････････････ 173 T Take screenshot ･･･････････････････････ 40 Task manager ･････････････････････････ 59 Tethering ････････････････････････････ 154 Bluetooth tethering ･････････････････ 156 USB tethering ･･････････････････････ 155 Wi-Fi tethering ･････････････････････ 155 Text editing ･･･････････････････････････
What's New ･･･････････････････････････ 56 White balance ････････････････････････ 159 Wi-Fi ･･･････････････････････････････ 147 Wi-Fi Direct ･･････････････････････････ 150 Wireless & netoworks ･･････････････････ 147 WORLD CALL ･････････････････････････ 77 World clock ･･････････････････････････ 143 WORLD WING ････････････････････････ 187 X Xperia Chinese keyboard ････････････････ 62 Xperia Connectivity ･･･････････････････ 152 Xperia Japanese keyboard ･･･････････････ 62 Online help ･････････････････････････ 6
Make various applications, check your subscription, and more online The terminal: dmenu ⇒ " お客様サポート (Customer support)" ⇒ " ドコモオンライン手続き (docomo online procedures)" PC: My docomo (https://www.nttdocomo.co.jp/mydocomo/ ) ⇒ 住所や契約内容の変更手続きがしたい (I want to change my address or subscription)(in Japanese only) * There are cases where the site may not be available due to system maintenance, etc. * When using " ドコモオンライン手続き (docomo online procedures)", "Network security code" and "docomo ID and password" are required.
General Inquiries 0120-005-250 (toll free) Repairs ■From DOCOMO mobile phones (In Japanese only) (No prefix) 113 (toll free) *Service available in: English, Portuguese, Chinese, Spanish. *Unavailable from part of IP phones. (Business hours: 9:00 a.m. to 8:00 p.m.) *Unavailable from land-line phones, etc. ■From DOCOMO mobile phones (In Japanese only) (No prefix) 151 (toll free) ■From land-line phones (In Japanese only) *Unavailable from land-line phones, etc.
