User Guide

81
Phone
Even when the screen is locked, you can still
operate the terminal to respond to an
incoming call.
1
While receiving a call, drag
(left) to (right).
To accept a video call, drag (left) to
(right). To answer a call with voice
only, drag (left) for "Voice only" to
(right).
2
When the call is finished, [End call].
To end a video call, tap the screen
u
Tap
[End call].
Putting a call on hold
If you are not available to answer a call, you
can put the call on hold.
1
Drag upwards when
receiving a voice call.
2
[Put caller on hold]
The other party will hear a message
saying that the call is on hold.
3
When you are ready to answer the
call, drag (left) to (right).
The call will be put on hold until you
drag (right) to (left) or the other
party ends the call.
Answering an incoming call with
Answering Machine
Even when Answering Machine is not set, you
can activate Answering Machine manually.
1
Drag upwards when
receiving a voice call.
2
[Reject with Answering Machine].
Information
If there is a recorded message, is displayed in the
status bar. Drag the status bar downwards
u
Tap
[Answering Machine] to display the Messages screen,
where you can check the recorded message.
Muting the ringtone for an incoming
call
1
While receiving a call, press the
volume key or
P
.
Information
You can stop vibration by pressing the volume key or
P
when silent mode (vibration) is set.
On the Home screen etc., press the volume key to
adjust the ringtone volume.
Declining a call
1
While receiving a call, drag
(right) to (left).
Receiving a phone/video call