User Guide

44
Before Using the Terminal
1
Press and hold
P
for over a
second.
2
Tap / / .
: Mute (Ringtone 0)
: Vibrate
: Cancel silent mode
❖
Information
･
Press and hold the volume down key to set vibrator
and press the volume down key while the vibrator is
set to set mute. On the lock screen, during a call, in
some applications such as Camera and Walkman,
silent mode cannot be set even if the volume down
key is pressed.
･
Setting the terminal to silent mode does not mute
sounds for shutter, playback of video or music,
dialpad operation sound during a call or sound
emitted when [End call] is tapped, etc.
･
While silent mode is set, adjusting volume for
"Ringtone & notifications" from "Volumes" (P.156) in
Sound or turning up the volume by pressing the
volume up key cancels silent mode.
You can capture what is displayed on the
screen. (Take screenshot/Record screen)
Capturing a still image (Take
screenshot)
1
On the screen you want to capture,
press and hold
P
and volume
down key for over a second at the
same time.
･
Screenshot is captured and appears
in the status bar.
❖
Information
･
Alternatively, press and hold
P
for over a second
u
Tap [Take screenshot] to capture screenshot.
･
Drag the status bar downwards
u
Tap [Screenshot
captured.] to check captured images in the "Album"
or "Photos" application. Also, tap [Share] to attach
captured images to an application to send or to
share them.
Setting silent mode Capturing a still image or video
displayed on the screen