User Guide

35
Before Using the Terminal
When using supplied Desktop Holder SO24
and AC Adapter 05 (optional) for charging, do
the following procedures.
･
Be sure to attach the supplied attachment
(Attachment 34A or Attachment 34B) to the
desktop holder when charging (P.36). The
terminal cannot be charged on the desktop
holder without attachment.
1
Insert a microUSB plug of the AC
adapter into the charging jack on
the back side of the desktop
holder with the engraved side (B)
facing up ( ).
2
Unfold the power plug of the AC
adapter and insert it into an outlet.
3
Install the terminal to the desktop
holder and move it left or right
until it clicks.
･
When the terminal and the desktop
holder are correctly connected, the
notification LED of the terminal turns
on (P.46).
4
When charging is complete,
holding the desktop holder, lift the
terminal up to remove.
5
Remove the power plug of the AC
adapter from the power outlet.
6
Remove the microUSB plug of the
AC adapter from the desktop
holder.
Charging with Desktop Holder