User Guide

33
Before Using the Terminal
2
Remove the docomo nano UIM
card from the tray ( ), then insert
the tray into the terminal and
press it straight all the way.
･
Be careful about the direction to insert
of the tray.
3
Close the docomo nano UIM card
slot cover, firmly press the cover,
and make sure that there are no
gaps between the terminal and
cover (P.32).
1
Open the slot cover, and insert a
fingernail into the hook at the
edge of the label tray, then pull it
out straight.
The internal battery is not fully charged at the
time of purchase.
･
Estimated charging time (P.213)
The charging time varies by the internal
battery condition or operating environment.
CE mark and FCC ID
Charging
Operation time on full charge
(estimate)