User Guide

31
Before Using the Terminal
*2 Do not remove the nameplate with stickers of CE
mark, FCC ID and IMEI information printed.
❖
Note
･
Do not put a sticker etc. on the proximity sensor.
･
The back cover cannot be removed. Attempting to
remove the back cover with excessive force may
cause damage or malfunction.
･
The battery is built into the terminal and not removal.
The docomo nano UIM card is an IC card
recorded user information such as your
phone number etc.
･
You can use the terminal with a docomo nano
UIM card. If you have a docomo mini UIM,
docomo UIM, or FOMA card, bring it to a
docomo Shop to replace it with a docomo
nano UIM card.
･
When docomo nano UIM card is not inserted
to the terminal, making calls, packet
communication, etc. are not available.
･
For details on the docomo nano UIM card,
refer to the docomo nano UIM card manual.
･
When inserting/removing the docomo nano
UIM card, make sure to power off the terminal
(P.39).
･
Opening/closing docomo nano UIM card slot
cover (P.25)
■
Security codes of the docomo nano
UIM card
The docomo nano UIM card has a security
code called a PIN code. The code is set to
"0000" at subscription, which you can
change by yourself (P.165).
❖
Information
･
Please be careful not to touch or scratch the IC when
you handle the docomo nano UIM card. Doing so
may cause malfunction or damage.
1
Open the docomo nano UIM card
slot cover, then hook your
fingertip on the projection part of
the tray ( ) to pull the tray
straight out and remove it from
the terminal.
docomo nano UIM card
Inserting docomo nano UIM
card