User Guide

188
International roaming
By default, the terminal automatically
searches available network and connect to it.
To switch network manually, set as follows.
Setting data roaming
1
From the Home screen,
u
[Settings]
u
[More...]
u
[Mobile
networks].
2
Mark "Data roaming"
u
Read the
notes and tap [OK].
Setting a network operator
1
From the Settings screen,
u
[Settings]
u
[More...]
u
[Mobile
networks]
u
[Service providers].
･
If a note appears, tap [OK].
2
[Search mode]
u
[Manual].
･
To display available networks, tap
[Search networks].
3
From "AVAILABLE NETWORKS",
mark a network to use.
❖
Information
･
If you cannot search networks, disable mobile data
communication (P.147) and then search again.
･
If you set a network manually, the terminal is not
reconnected to another network automatically even
if you move out of the network area.
･
To return to "Automatic", tap [Automatic] in Step 2.
Setting network mode
1
From the Settings screen,
u
[Settings]
u
[More...]
u
[Mobile
networks]
u
[Network Mode].
2
Tap any of [LTE (preferred)/3G/
GSM]/[LTE/3G]/[3G/GSM]/[3G
only]/[GSM only].
･
If you select "LTE (preferred)/3G/GSM"
to switch available network
automatically.
Display
During international roaming, appears on
the status bar.
･
You can confirm the name of the connected
network operator on the Notification panel.
❖
Note
･
While appears on the status bar, packet
communication is available. Note that packet
communication charge may become high.
Settings for overseas use