User Guide

146
Settings
Adding a Wi-Fi network manually
･
Turn Wi-Fi on beforehand (P.145).
1
From the Home screen,
u
[Settings]
u
[Wi-Fi].
2
u
Enter a network SSID of the
Wi-Fi network you want to add.
3
Tap "Security" setting item
u
Tap a
security type of the Wi-Fi network
you want to add.
･
4 options, "None", "WEP", "WPA/WPA2
PSK", or "802.1x EAP", appear.
4
If required, enter security
information for the Wi-Fi network
you want to add.
5
[Save].
Using optional menu
1
From the Home screen,
u
[Settings]
u
[Wi-Fi]
u
.
Scan P. 1 4 5
WPS PIN Entry P. 1 4 5
Wi-Fi Direct P. 1 4 7
Advanced Network
notification
Set whether to notify
when Wi-Fi open network
is detected.
･
Turn Wi-Fi on
beforehand (P.145).
Keep Wi-Fi on
during sleep
Set to disable the Wi-Fi
function when the screen
backlight turns off. Also
set the terminal to always
turn on the Wi-Fi function
or to always turn it on
when the terminal is
charged.
Scanning
always
available
Set whether to allow
Google location service
and other application to
scan network when Wi-Fi
is OFF.
Avoid poor
connections
Set whether to use LTE/
3G/GSM network mode
when Wi-Fi radio waves
are weak or
communication quality is
bad.
Install
certificates
Install certificates.