User's Guide

35
Before Using the Terminal
･
It is recommended to use the AC Adapter 04/
05 (optional) for charging. For details on the
AC Adapter 04/05, see the AC Adapter 04/05
manual.
･
The AC Adapter 03/04/05 is compatible with
100V to 240V AC. For using the terminal
overseas, a plug adapter that fits the electrical
outlets in the country you stay is needed. Do
not use an electrical transformer for overseas
use to charge the terminal.
･
Use a compatible AC adapter or microUSB
cable for charging. If you use a charger other
than compatible ones, charging may not be
available or operations may not be performed
correctly.
･
Insert and remove the AC adapter cable or
microUSB cable slowly and evenly so that
excessive force is not applied.
･
When charging starts, notification LED of the
terminal turns on (P.46).
･
To check the battery level, see the status bar at
the top of the screen or from the Home
screen, tap
u
[Settings]
u
[About
phone]
u
[Status] to see "Battery level".
･
If you start charging with the terminal
powered off, the power turns on, although
you cannot operate the terminal. Therefore,
do not charge the battery in a place where
the use of the terminal is prohibited.
When using supplied Desktop Holder SO23
and AC Adapter 05 (optional) for charging, do
the following procedures.
･
Be sure to attach the supplied attachment
(Attachment 45A or Attachment 45B) to the
desktop holder when charging (P.36). The
terminal cannot be charged on the desktop
holder without attachment.
1
Insert a microUSB plug of the AC
adapter into the charging jack on
the back side of the desktop
holder with the engraved side (B)
facing up ( ).
2
Unfold the power plug of the AC
adapter and insert it into an outlet.
Before charging Charging with desktop holder