User's Guide

215
Appendix/Index
Software update starts immediately.
･
There are 2 ways to activate software update:
activating from Software update notice
screen and activating from the menu.
1
From the Home screen,
u
[Settings]
u
[About phone]
u
[Software Update].
2
[Start the software update]
u
[Yes].
･
For activating from Software update
notice screen, display the Software
update notice screen
u
[Start update].
3
After a message for rewriting start
appears, rewriting starts
automatically in approximately 10
seconds.
･
Tap [OK] to start rewriting
automatically.
･
While updating the software, all key
operations become disabled. Also,
updating cannot be canceled.
･
When the software update is complete,
the terminal restarts and the Home
screen is displayed.
❖
Information
･
If software update is not needed, "No update is
needed." is displayed.
■
Post-update display
appears on the status bar. Drag the
status bar downwards
u
Tap the
notification, a message indicating that
software update is complete appears.
You can preset time to update the software if
you want to specify another time for
installing the update file.
1
Display the Software update
notice screen
u
[Set Time].
2
Set a time
u
[Set].
■
When the reserved time is reached
When the reserved time is reached, a
message for rewriting start appears, then
rewriting starts automatically in
approximately 10 seconds.
❖
Information
･
While updating the software, all key operations
become disabled. Also, updating cannot be
canceled.
･
If software update could not be started at the preset
time, the software update will be performed at the
same time the following day.
･
While upgrading Android software, software update
is not executed even when the set time arrives.
･
When an alarm etc. is set at the same time as the
reserved time, priority will be given to the software
update.
Updating software
immediately
Reserving software update