SO-02G INSTRUCTION MANUAL 14.
Introduction ● "Instruction Manual" (PDF file) Operations and settings of each function are explained. It can be downloaded from NTT DOCOMO website. https://www.nttdocomo.co.jp/english/support/ trouble/manual/download/index.html Thank you for your purchase of "SO-02G". For proper use of the SO-02G, read this manual carefully before and while you use the SO-02G. * You can download the latest information of " ク イックスタートガイド (Quick Start Guide)".
Operation descriptions In this manual, each key (key icon) operation is described with P, k, x, y, r. And selection operations of the icons or function items on the touch screen are described as follows. Description From the Home screen, u[Settings]u [About phone]. Operation From the Home screen, tap (Apps button), and then tap "Settings" on the next screen and "About phone" on the following screen in order. Touch and hold an Keep touching an icon longer (1icon. 2 seconds).
Supplied accessories ･ ･ クイックスタートガイド (Quick Start Guide) (In Japanese only) SO-02G (with warranty) ･ SO-02G のご利用にあたっての注意事項 安全上／取り扱い上のご注意 (Notes on usage Safety/Handling precautions) (In Japanese only) ･ Desktop Holder SO20 (with warranty) ･ TV/Mobacas antenna cable SO02 For optional accessories compatible with the terminal (optional) , refer to NTT DOCOMO website. https://www.nttdocomo.co.
Contents ■ Supplied accessories. . . . . . . . . . . . . . . . . 2 ■ About using the terminal . . . . . . . . . . . . 5 ■ Safety Precautions (Always follow these Phone . . . . . . . . . . . . . . . . . . . . . . 75 directions) . . . . . . . . . . . . . . . . . . . . . . . . . . 8 ■ Handling precautions. . . . . . . . . . . . . . . 16 ■ Waterproofness/Dustproofness . . . . . 23 Making/Receiving a call.................................................... 75 Operations during a call .........................
Settings . . . . . . . . . . . . . . . . . . . 143 Appendix/Index . . . . . . . . . . . .193 Viewing the setting menu............................................ 143 WIRELESS & NETWORKS ................................................. 143 DEVICE....................................................................................... 153 PERSONAL............................................................................... 160 ACCOUNTS........................................................................
Contents/Precautions About using the terminal The terminal supports LTE, W-CDMA, GSM/ GPRS and Wireless LAN Systems. ･ Because a terminal operates using radio frequencies, it cannot be used inside a tunnel, underground, in a building or other locations where radio waves do not reach the terminal, in locations with weak radio wave condition, or out of Xi/FOMA service area.
The terminal automatically performs communication for synchronizing data, checking the latest software version, maintain connection with the server, etc. If you transmit a large amount of data such as downloading applications or watching video, a packet communication charge becomes high. Subscription of packet flat-rate service is highly recommended. ･ Depending on the applications or service you use, packet communication charge may be applied even in Wi-Fi communication.
For services provided by Google, refer to Google Terms of Service. For other web services, refer to each terms of service. ･ Applications and service contents are subject to change without prior notice. ･ The terminal supports only sp-mode, mopera U and Business mopera Internet. Other providers are not supported. ･ To use tethering, subscription of sp-mode is required. ･ Packet communication charge when using tethering varies depending on the charging plan you use.
Safety Precautions (Always follow these directions) ■ Indicates prohibited actions. For safe and proper use of the terminal, please read the "Safety Precautions" prior to use. Keep the Manual in a safe place for future reference. ■ ALWAYS observe the safety precautions since they intend to prevent personal injury or property damage. ■ The following symbols indicate the different levels of injury or damage that may result if the guidelines are not observed and the terminal is used improperly.
1. Handling the terminal, adapter, desktop holder, docomo mini UIM card, TV/Mobacas antenna cable (common) No liquids DANGER Don’t Don’t No disassembly No liquids Do not use, store or leave the equipment in hot places (e.g. by the fire, near a heater, under a kotatsu, in direct sunlight, in a car in the hot sun) (including wearing the equipment by putting in a pocket of clothes etc.). Doing so may cause fire, burns or injury.
Do If you notice anything unusual about the equipment such as an unusual odor, overheating, discoloration or deformation during operation, charging or storage, immediately perform the following measures. ・Remove the power plug from the power outlet or cigarette lighter ・Power off the terminal Failure to do so may cause fire, burns, injury or electric shock. CAUTION Don’t Do not place on an unstable or inclined platform. Doing so may cause the device to fall and cause injury.
WARNING Don’t Don’t Don’t Do not turn on the light with the lighting luminescence part close to the eyes. Especially to shoot infants or young children, step away from them 1 m or more. Doing so may cause blurred vision. Or injury by dazzling eyes or surprising may occur. Do Do not allow a foreign substance such as water and other liquids, metal parts, or flammables to get in the docomo mini UIM card or microSD card slot on the terminal. Doing so may cause fire, burns, injury or electric shock.
Do Do Do If you are wearing any electronic medical equipment, check with the relevant medical electronic equipment manufacturer or vendor whether the operation may be affected by radio waves. The radio waves from the terminal may affect electronic medical equipment. Power off the terminal near electronic devices or equipment operating on high precision control or weak signals. Failure to do so may interfere with the operation of electronic devices or equipment.
Don’t Do Do Do Do Do not discard the battery together with other garbage. Doing so may cause igniting or environmental destruction. Bring the unnecessary terminal into a sales outlet such as docomo Shop. If your local municipality has a battery recycling program, dispose of them as provided for. To use the terminal in car, check with automobile manufacturer or dealer to determine how the device is affected by radio waves before using.
Don’t When you insert and remove the AC adapter from power outlet, do not contact a metal strap or other metal objects with the jack. Doing so may cause fire, burns or electric shock. Don’t Do not put an excessive force up, down, left or right when the adapter is connected to the terminal. Doing so may cause fire, burns, injury or electric shock. No wet hands Do Do Do Do not touch the adapter cord, charging jack or outlet with wet hands. Doing so may cause fire, burns or electric shock.
4. Handling the docomo mini UIM card Do CAUTION Do Be careful of the cut surface when handling docomo mini UIM card. Failure to do so may cause injury. 5. Handling the terminal near electronic medical equipment Do WARNING Do Do If you use an implantable cardiac pacemaker or implantable cardioverter defibrillator, keep the terminal 15 cm or more away from the implant at all times. The radio waves from the terminal may affect the performance of electronic medical equipment.
Part Desktop holder (upper case, lower case) Desktop Holder (attachment) Desktop Holder (housing) Desktop holder (magnet connector) Desktop holder (contacts) Desktop holder (label) Desktop holder (rubber foot) TV/Mobacas antenna cable (connector plug: metal section) TV/Mobacas antenna cable (connector plug: body, cable, headset jack: body) Material Surface treatment ABS resin ― PC resin ― PA resin ― Handling precautions ■ Common precautions ･ Neodymium Nickel plating Brass Gold plating The adapt
･ Clean the terminals occasionally with a dry cotton swab. ･ If the jack is soiled, connection gets worse and it may cause power to be turned off or insufficient battery charge, so clean the jack with a dry cotton swab etc. When cleaning, be careful not to damage the terminals. ･ Do not leave the terminal near the air conditioning vent. Extreme temperature changes may produce condensation and corrode the internal parts of the terminal, causing it to malfunction. ･ Make sure to use the terminal etc.
･ Do not leave the camera under direct sunlight. The operating time of the internal battery varies depending on the operating environment and the degradation level of the internal battery. ･ Be careful especially about the following points when preserving the terminal. ･ If you do so, some of the elements may melt or become faded. ･ Usually, use the terminal with microUSB jack/docomo mini UIM card slot cover and microSD card slot cover closed.
･ When using the DC adapter for charging, do not turn off the vehicle engine. ･ Doing so may cause the vehicle battery run out. When you use the power outlet with a mechanism to prevent the plug from being removed, follow the instructions on the outlet's user's manual. ･ Do not subject the equipment to a strong impact. Do not deform the charging jack. ･ Doing so may cause malfunction. Magnet is used for magnet connector that is between contacts of the desktop holder.
Take an expended docomo mini UIM card to sales outlet such as docomo Shop for proper disposal in order to protect the environment. ･ Do not carelessly damage, contact, or short-circuit an IC. ･ Doing so may cause data loss or malfunction. ･ Do not drop a docomo mini UIM card or subject it to impact. Doing so may cause malfunction. ･ Do not bend a docomo mini UIM card or place a heavy object on it. Doing so may cause malfunction.
･ Bluetooth cautions The operating frequency band of the terminal is used by industrial, scientific, consumer and medical equipment including microwave ovens, premises radio stations for identifying mobile units used in the manufacturing lines of plants (radio stations requiring a license), specified low power radio stations (radio stations requiring no license) and amateur radio stations (hereinafter referred to as "another station").
- If the device causes radio interference to specified low power radio stations or amateur radio stations, contact "General Inquiries" on the last page. ･ ■ Note ･ 5GHz device cautions The terminal is compliant with rules on the technical standard conformance of specified wireless equipment based on the Radio Law/ Telecommunications Business Act, and as a proof of it, the "Technical Compliance Mark " is depicted on the electronic nameplate of the terminal.
･ Do not alter the basic software illegally. It is regarded as the software modification and Repairs may be refused. Waterproofness/ Dustproofness SO-02G provides waterproofness property of IPX5*1, IPX8*2 and dustproofness property of IP5X*3 with microUSB jack/docomo mini UIM card slot cover and microSD card slot cover firmly attached. *1 IPX5 means that a phone keeps functioning after applying a jet flow of 12.5 L/min.
･ You can use the terminal in a bathroom. - Do not immerse the terminal into a bathtub. Also, do not use the terminal in hot water. Doing so may cause malfunction. If you should fall the terminal into the bathtub, immediately pick it up to drain water in specified procedure (P.27). - Never put the terminal in hot spring water or water containing soap, detergent or bath powder. In case the terminal gets wet with water other than tap water, wash it in the procedure above.
■ Opening the micoUSB jack/docomo mini UIM card slot cover and microSD card slot cover Open the covers with your fingertip by the grooves. It is recommended to replace the parts for maintaining waterproof/dustproof property once every two years regardless of whether any abnormality is present. DOCOMO replaces the parts as a chargeable service. Bring the terminal to a sales outlet such as a DOCOMO-specified repair office. Important precautions Do not perform actions shown in the illustrations below.
Do not apply water flow stronger than allowed (water flow of 6L/min. or more : e.g., such water flow that gives you pain when applied to your skin directly from a faucet or shower). SO-02G provides IPX5 waterproofness, but doing so may cause malfunction. ･ If the terminal gets wet with salt water, sea water, refreshing beverage or mud or sand adhered, wash it immediately. If they dry out, it is hard to remove the dirt and it may cause damage or malfunction.
Draining water from the terminal c Swing the terminal in about 10 times against dry, clean cloth etc. to wipe off water remaining in the earpiece/notification LED, microphone/speaker, second microphone, headset jack, power key/ screen lock key, volume key/zoom key, camera key, contacts for the desktop holder, each cover (microUSB jack/docomo mini UIM card slot cover/ microSD card slot cover), etc. d Wipe off water drained from the terminal with dry, clean cloth etc., and dry naturally.
Notes on charging Check the following before and after charging. ･ Check if the terminal is not wet. Never charge the battery when the terminal is wet. ･ Accessories and optional devices are not waterproof/dustproof. ･ When charging the battery when or after the terminal is wet, adequately drain it and wipe off water with a dry, clean cloth etc., before connecting the supplied desktop holder or opening the microUSB jack cover.
Part names and functions ab c d g v h o i r x w y k s l e j p t q u m n f a b Notification LED Proximity sensor : Detect the face approaching during a call and turn on or off the touch screen to prevent misoperation, or help auto brightness control.
*2 Do not remove the nameplate with a sticker of CE mark, FCC ID and IMEI information printed. ■ ❖Note Do not put a sticker etc. on the proximity sensor. The back cover cannot be removed. Attempting to remove the back cover with excessive force may cause damage or malfunction. ･ The battery is built into the terminal and not removal. There is a security code called PIN code in the docomo mini UIM card. The code is set to "0000" at subscription, which you can change by yourself (P.164).
2 Set docomo mini UIM card into the tray with IC facing up ( ), then insert the tray with the card and press it all the way into the terminal. ･ Removing docomo mini UIM card 1 Open the docomo mini UIM card slot cover, then hook your fingertip on the projection part of the tray to pull the tray straight out and remove it from the terminal. 2 Remove the docomo mini UIM card from the tray ( ), then insert the tray into the terminal and press it straight all the way.
CE mark and FCC ID 1 Open the docomo mini UIM card slot cover, and insert a fingernail into the hook at the edge of the label tray, then pull it out straight. Charging The internal battery is not fully charged at the time of purchase. ･ Estimated charging time (P.212) Operation time on full charge (estimate) The charging time varies by the internal battery condition or operating environment. ･ "Continuous standby time", "Continuous call time" (P.
Life of the internal battery The internal battery is a consumable part. Each time the internal battery is recharged, the battery usage time per one charge gradually decreases. ･ When the battery usage time per one charge becomes about half of that at the time of purchased, replacing the internal battery is recommended because the internal battery is near the end of life. ･ Watching TV etc. for a long time while charging may shorten the lifetime of the internal battery.
Charging with Desktop Holder 2 Unfold the power plug of the AC adapter and insert it into an outlet. When using supplied Desktop Holder SO20 and AC Adapter 04 (optional) for charging, do the following procedures. ･ Be sure to attach the supplied attachment (Attachment 37A or Attachment 37B) to the Desktop Holder when charging (P.35). The terminal cannot be charged on the Desktop Holder without attachment. 3 Install the terminal to the Desktop Holder and move it left or right until it clicks.
Attaching/Removing the attachment ■ 1 2 ■ 1 Attaching Check the shape of front/back of the attachment and the attaching part of the desktop holder, then fit the attachment with the desktop holder. ❖Note You cannot charge the battery by connecting the desktop holder to a PC. ･ Check the connecting direction to connect correctly. Wrong connection may cause damage. ･ Attachment 37A is attached to the Desktop Holder by default.
1 2 Open the microUSB jack cover and insert the microUSB plug of the AC adapter horizontally into the microUSB jack of the terminal with the engraved side (B) facing up. Charging with a PC When using Micro USB Cable 01 (optional) for charging, do the following procedures. ･ Opening/closing microUSB jack cover (P.24) Unfold the power plug of the AC adapter and insert it into an outlet. ･ Notification LED of the terminal turns on (P.43).
･ 3 When a screen for new hardware detection etc. appears on the PC, select " キャンセル (Cancel)". When the charging is complete, remove the USB plug of the microUSB cable from the USB port of the PC. 4 Remove the microUSB plug of the microUSB cable evenly from the terminal. 5 Close the microUSB jack cover, firmly press it and make sure that there are no gaps between the terminal and cover. Turning power on/off Turning power on 1 Press and hold P for over a second.
❖Information If the battery level is low, the notification LED flashes in red 3 times when P is pressed to turn the power on. Charge the terminal (P.32). ･ When SIM card lock (P.164) is set, enter PIN code on the PIN code entry screen (P.164). Canceling the screen lock ･ Turning power off 1 2 Press and hold P for over a second. [Power off]u[OK].
❖Information ･ To delete a widget, on the lock screen, touch and hold a widget to deleteuDrag it to "Delete" displayed at the top of the screen. 3 When the initial settings screen for docomo services appears, mark [Agree to all] and then tap [Start settings]. ･ Initial settings When you first turn on the terminal after purchasing, follow the onscreen instructions to make initial settings for language, services, etc. 1 Select [English (United States)]u [Done]u .
Basic operations Operations on the touch screen ■ Touch an item such as icon or menu with your finger lightly and release it. ･ Double-tap means tapping twice quickly. Using the touch screen Precautions on using touch screen Touch screen is designed for being touched lightly with fingers. Do not push the touch screen hard with a finger or press sharp objects (nail, ballpoint pen, pin, etc.) against the screen. ･ Touching the touch screen may not work in the following cases.
■ Pinch Touch the screen with two fingers and widen (pinch-out) or narrow (pinch-in) the fingers' distance. On some screens, pinchout to zoom in and pinch-in to zoom out. Basic key icon operation x y r x Back Go back to the previous screen. Or close a dialog box, an option menu, the Notification panel, etc. y Home Go to the Home screen. Touch and hold the icon and drag to to activate " しゃべってコン シェル (Shabette concier)" or "Google" application, or drag to to activate "What's New".
Switching portrait or landscape view automatically You can set the screen orientation to switch between landscape and portrait view automatically according to the terminal orientation. 1 2 Drag the status bar downwards. [Quick settings]u[Auto rotate]. ･ When the setting is enabled, appears. ❖Information Even when you change the orientation of the terminal, the screen may not change to landscape view depending on the screen such as Home screen, etc.
Capturing screenshot Notification LED You can save the current displayed screen as an image (screenshot). 1 On the screen you want to capture, press and hold P and volume down key for over a second at the same time. ･ Screenshot is captured and in the status bar. appears ❖Information Alternatively, press and hold P for over a seconduTap [Take screenshot] to capture screenshot. ･ Drag the status bar downwardsuTap [Screenshot captured.] to check captured images in the "Album" or "Photos" application.
Connecting to Bluetooth device Airplane mode activated Silent mode (vibration) ON Silent mode (mute) ON Speaker phone turned on* Microphone set to mute* Alarm is set NFC Reader/Writer, P2P function ON Positioning with GPS Battery status The battery is charging Battery is low (4％ or less) PUK code locked or docomo mini UIM card not inserted STAMINA mode ON Low battery mode ON Status bar A status bar appears at the top of the screen. In the status bar, the terminal status and notification are displayed.
Notification icon The main notification icons displayed on the status bar are as follows. New email message New Gmail message New message (SMS) Problem with message (SMS) delivery New Area Mail Screenshot captured New Facebook message Uploading data to Facebook Uploading data to Facebook completed Facebook setting request notification Receiving/downloading data Sending/uploading data Notification of data reception etc.
The terminal set as media server/connection request notification received Error message Warning message Problem with sync Setup guide unchecked Some notifications are hidden Notification from docomo LIVE UX Setting USB tethering Wi-Fi tethering ON Bluetooth tethering is set 2 or more devices are set for tethering AUTO-GPS is set Omakase Lock is set Available memory on the terminal is low Notification of data transfer to microSD card exists (available internal storage decrease) Authentication failed in docom
Enable/disable location information. Set whether to switch portrait/ landscape view automatically according to the terminal orientation. Brightness Adjust screen brightness. Airplane mode Enable/disable Airplane mode. STAMINA Enable/disable STAMINA mode. Glove mode Enable/disable Glove mode. Settings Display Settings menu (P.143). Location Auto rotate b Clear ･ Clear contents on the Notification panel. Some notifications may not be cleared. ❖Information Tap x to close the Notification panel.
g Apps button Adding a widget to the Home screen ❖Information Widget is an application which can be added to the Home screen to use. Use a widget to start an application easily. ･ To change the initial home screen for operations, switch the home screen you want to change to, touch and hold the area of the Home screen where no icons are displayeduTap . Adding a home screen Touch and hold an area of the Home screen where no icons are displayed. Up to 7 home screens can be displayed.
Adding a shortcut to the Home screen You can add shortcuts of application, bookmark, etc. 1 Touch and hold an area of the Home screen where no icons are displayed. ･ 2 3 Alternatively, pinch-in on the Home screen. [Apps]. Select [Shortcuts] or an application you want to add. When you select "Shortcuts", select from the stored shortcuts. ･ When a data selection screen or setting screen appears, follow the onscreen instructions.
3 Tap any of [Album]/[Live Wallpapers]/[Photos]/an image. When you tap [Album], select an imageu[Crop photo]/[Crop picture]u[Always]/[Just once]uAdjust cropping frame by draggingu[Crop]/ [Save]. ･ When you tap [Live Wallpapers], select a contentuTap [Set wallpaper]. ･ When you tap [Photos], select a photouTap [SET WALLPAPER]. ･ ❖Information ･ To return to the Home screen, tap y or x, or tap any home screen. Changing theme You can change themes for the Home screen, wallpaper of the lock screen, etc.
Media WALKMAN Album Movies TV FM radio YouTube NOTTV dmarket d ヒッツ (d hits) Camera docomo mail Messaging Dial Apps* Browser Speed dial 1/Speed dial 2/Speed dial 3 P.54 P.130 P.54 P.111 P.116 P.132 P.105 P.100 P.56 P.117 P.88 P.88 P.54 Using speed dials Save frequently used contacts to "Speed dial 1", "Speed dial 2", and "Speed dial 3" to easily make a call or send a message. ■ Save phone numbers and mail addresses to "Contacts" beforehand.
❖Information ･ Others To change/delete/edit contacts saved in the speed dials, select a contact saved in the speed dialu [Menu]uTap any of [Edit entry]/[Delete entry]/[Edit contact]. Using Settings 1 On the Simple Home screen, [Settings]. My profile Display Sound Check your own phone number and mail address, etc. Sleep Select a time duration before the screen back light turns off. Wallpaper Set wallpaper for Simple Home screen. ･ To set "Custom", unmark "Default" and tap [Custom].
Changing applications on the Simple Home screen 1 On the Simple home screen, [Settings]u[Display]u[Customize Home]. 2 3 [Change apps]/[Reorder apps]. Select applications to changeuSelect applications to display/select a location to move to. ･ 4 Xperia™ Application screen Application screen displayed when "Preferred applications" is set to "Xperia™ applications" in the initial settings is explained here. ･ Switching Home application (P.60) b . c Grayout applications cannot be changed. [OK].
❖Information On the leftmost application screen, flick to the right the screen (except for the left edge) to open the optional menu. ･ While sorting application icons, drag an icon to the right edge of the application screen to add an application screen. ･ Application list Applications displayed on the application screen are as follows. ･ For usage of some applications, separate subscription (Charged) is required.
Maps Use Google Maps services, such as viewing current location, finding another location and calculating routes. → P.136 docomo mail Send/receive mails using DOCOMO mail address (@docomo.ne.jp). Sent/received mails are saved in cloud. You can view the same mail on the multiple devices or transfer mail data easily when changing model. Pictograms and Deco-mail can be used, and automatic reception also is supported. → P.88 Osaifu-Keitai Use Osaifu-Keitai. → P.101 Settings Make the terminal settings. → P.
Play Books Download new books, bestsellers, etc. from Google Play to read. Play Games Download games, from Google Play and play them. Hangouts Chat using photos, pictograms, and videos. Alarm & clock Set alarms or display clock. → P.138 ツール (Tools) The folder contains "Calculator", "Sketch", "FM radio", "File Commander", "OfficeSuite" and "Evernote" applications. docomo phonebook Manage contacts using phonebook application provided by DOCOMO. → P.83 Phone Use phone or make phone settings. → P.
Schedule An application for creating/managing schedule whose data is shared with Memo application. It supports i-concier service. → P.137 Memo An application for creating/managing memos whose data is shared with Memo application. It supports i-concier service. バックアップ & スキャン (Backup & Scan) The folder contains "docomo backup", "Anshin Scan" applications. データ保管 BOX (Data Storage Box) An application for using Data Storage Box.
Adding an application to the Home screen Adding a folder to the application screen Add shortcuts of application to the Home screen. When the order of application icons (P.53) is set to "Own order", application icons can be saved in folders and managed. 1 On the application screen, touch and hold an icon you want to add to the Home screen. ･ 2 For the application icons in a folder, drag out from the folder. Drag it to "Add to Home screen" displayed at the top of the screen.
Small apps Task manager You can check the recently-used applications and end them. You can activate a small app (application displayed in a small window) which can be used while using another application. Opening recently-used application window You can use a small app (application displayed in a small window) such as Browser while using another application. Applications downloaded from Google Play or widgets can be added to small apps. Using small apps 1 r. 2 Select a small app to use.
Adding small apps 1 ru 2 Touch and hold a small app or widget to adduDrag it to the small apps bar (Favorites). ･ Switching Home application . Small apps list appears. ❖Information Alternatively, select an app/widget in the small app list to activate a small app. ･ In the small app list, tap u[Play Store]/[Widgets] to install a new small app from Play Store or add a widget to small apps.
Searching information in the terminal and web pages Enter a word in the search box to browse the information in the terminal or on the Internet. 1 From the Home screen, tap the Google Search widget. 2 Enter a search word. 3 Tap an item or keyboard. ･ ･ Character entry (P.62) Display a list of search candidates. of software ❖Information In Step 1, the explanation screen for Google Now may appear. Follow the onscreen instructions. ･ When an application appears in Step 2, select it to activate.
Character entry 1 ･ Enter characters using the software keyboard which appears when you tap the character input box in a mail, phonebook, etc. ❖Information When the software keyboard is displayed, appears on the status bar. ･ To hide software keyboard, tap displayed at the lower left of the screen. ･ Touch and hold a text on the character entry screen to display the enlarged text.
Software keyboard For Xperia™ Japanese keyboard, the following software keyboard can be used. ･ Character input method (P.64) Keypad QWERTY Keyboard with multiple-characterassigned keys. Flick input or Multitap input is used for character entry. Keyboard with characters allocated in the same arrangement as general PCs. Enter Japanese in Roman character. ❖Information Besides using software keyboard, handwriting input and voice input are available for entering characters.
b Character input method Show/hide the quick tool bar. When you tap a key on the software keyboard, candidates list for the entered characters appears. Tap a word you want to enter from the candidate list, text can be input one after another. a Display the previous character (reverse order). / Appears when entering numbers, tap to switch onebyte/two-byte character. / / Appears in Alphabet mode, tap to switch lower case, capitalization and upper case.
g h Enter spaces. In Kana mode, highlight and select word in the candidate list. i Enter a line feed. * j Appears before fixing character and fixes the character. * In some screens, , " 次へ (Next)", " 完了 (Done)", " 実行 (Go)", etc. appear. Change Xperia™ Japanese keyboard settings. k Return to keypad/QWERTY. ❖Information To return to the display before conversion after the conversion is fixed, tap displayed in つながり予測 (associative) candidate (except in handwriting input mode) etc.
■ Multi-tap input Tap the same key continuously to enter the assigned character. To enter a character assigned to the same key, wait for changing color of tapped key to the original (approx. 1 second), then enter the next character (for entering the next character soon, tap to move the cursor). With the key in the original color, tap to enter the last entered character again. ･ Ex: To enter " あお " a Tap " あ " onceuWait approximately 1 second (until the key color returns to the original).
Quoting contacts If contacts are registered to the Contacts, you can use "Contact Picker 2.3" to enter contact information when entering characters. 1 On the character entry screen, of the quick tool bar. ･ 1 If the quick tool bar does not appear, tap (for character mode of "Alphabet" and "Numeric", tap / to switch to "Kana", then appears). 2 [Contact Picker 2.3]uTap "Contacts" tab. 3 4 Tap the contact to pick up. Mark items you want to quoteu[OK].
Setting character entry For each input method, you can make settings related to character entry. 1 From the Home screen, u[Settings]u[Language & input]. 2 of "Xperia™ Chinese keyboard"/"Xperia™ keyboard"/ "Google voice typing"/"MojiHenshu"/"Xperia™ Japanese keyboard". ･ Tap an item displayed on the screen to set. ❖Information The items vary depending on the input method.
docomo LIVE UX Home screen Managing the Home screen Tapping y displays Home screen which consists of up to 7 screens you can use flicking left and right. a Move application icons or add widgets or folders to the Home screen. e b c f d c g Adding/Moving applications etc. to the Home screen "ひつじのしつじくん® (Butler Sheep)" ©NTT DOCOMO 1 Touch and hold an area of the Home screen where no icons are displayed. 2 Any of [Show apps]/[Show widgets]/[Create folder]/[MachiChara display setting].
Moving an icon on the Home screen 1 2 ❖Information You can disable some applications or widget which cannot be uninstalled by dragging to "Disable app" in Step 2 (P.159). ･ From the Home screen, touch an icon you want to move. Drag it anywhere. ･ To move to another Home screen, keep touching the icon and drag it to left or right. Deleting an icon from the Home screen 1 From the Home screen, touch and hold an icon you want to delete. 2 Drag to "Back to apps list"/ "Remove from Home".
Changing wallpaper Adding a home screen 1 Touch and hold an area of the Home screen where no icons are displayed. 1 Touch and hold an area of the Home screen where no icons are displayed. 2 3 [Change wallpaper]. 2 3 [Home screens]. Tap a wallpaper you want to change. ･ 4 Tap [See more wallpapers] to select from "Album", "Live Wallpapers", "Photos", or "Xperia™ wallpapers". When you select "Album", select an imageu[Crop photo]/[Crop picture]u[Always]/[Just once]uDrag etc.
Customizing the application screen Application screen 1 From the Home screen, ･ . Flick the Home screen downwards to display the application screen. a d e Moving/Adding an application or widget to the Home screen 1 On the application screen, touch and hold an icon you want to add to the Home screen. 2 Drag it to the Home screen display area at the bottom of the screen. b f c a Apps/Widgets/Wallpapers tab ･ Display application icons/widgets/wallpaper list.
Moving application in the application icon list 1 On the application screen, touch and hold an icon to move. 2 Drag it anywhere. Installing "Recommends" applications Using My Magazine My Magazine is a search service for displaying articles for categories you selected. It helps to set search words depending on your tendency of read articles or profile information to come close to your preference. 1 From the Home screen, 2 Tap an article you want to read. Install applications recommended by DOCOMO.
Setting categories 1 2 From the Home screen, u u[My Magazine settings]. [Display category setting]uMark categories to showu[OK]. ❖Information Tap [Set/Edit free word category] in Step 2 to add/ edit your favorite words as categories. Enter a wordu[OK]uMark categories you want to adduTap [OK] to set them to My Magazine. ･ Setting My Magazine to show/hide 1 From the Home screen, u u[My Magazine settings]u[My Magazine display setting]. 2 [Show]/[Hide]u[OK].
Phone Making/Receiving a call Emergency call Emergency call Making a call 1 2 3 From the Home screen, u"Dial" tab. Enter a phone numberu . ･ Tap to delete the number. When the call is finished, [End call]. ❖Information In Step 2, tap without entering a phone number to enter the phone number registered as the latest call in Recent calls. ･ To activate Xperia™ phone application, from the Home screen, tap u[Dial].
When calling 110, 119 or 118 for emergency from the terminal, tell that you are calling from a mobile phone, and give your phone number and your current location precisely for checking callback from the police/fire department. Also, make a point to call in a stationary position to prevent the call from being dropped. Do not power off the terminal for at least 10 minutes after the emergency call just in case the Police or Fire/Ambulance may have to get in contact with you.
Making an international call (WORLD ❖Information ･ Even if the screen lock is set, you can answer a call by CALL) For details on WORLD CALL, refer to DOCOMO International Services website. ･ Send replacing "+" by an international access code. u"Dial" 1 From the Home screen, tab. 2 Dial + (touch and hold [0])uEnter Country code, Area code (City code), recipient number in the orderu . ･ 3 When "Auto conversion" in International dial assist is marked (P.
❖Information ･ When recorded messages is recorded, appears on the status bar. Drag the status bar downuTap [Answering Machine] to display the Messages screen. You can check the recorded messages. Rejecting an incoming call and sending a message (SMS) Operations during a call On the Calling screen, you can set speakerphone or mute, or enter a phone number to make a call to another party. ■ a b c When you cannot answer a call, you can reject the call and send a message (SMS).
h Dial key : Send push signals or enter the phone number you want to add to make a call. ･ Enter additional phone numberuTap to make the ongoing call automatically on hold. ･ To add a call, "Call waiting" subscription is required (P.81). i Hold : Set a call on hold/cancel hold ･ To set a call on hold, "Call waiting" subscription is required (P.81). ･ When you switch the another screen such as Home screen etc. during hold, appears on the status bar.
Adding a number from the Recent calls to Phonebook 1 When “Add to the existing contact” is selected, select a contact to save to. On the profile edit screen, enter necessary information such as name. ･ 4 Alternatively, on the Recent calls screen, touch and hold a phone numberu[Edit number before call]u[Register]. [Add new contact]/[Add to the existing contact].
Answering Machine Call settings When Answering Machine is set, the answering message is played when you cannot answer an incoming call and message from the caller can be recorded even if you are not subscriber of Voice Mail Service. Up to approximately 60 seconds per one can be recorded. 1 2 From the Home screen, u [Call settings]u[Answering Machine]. Answering Machine Pick up after Use while roaming Greetings Messages . Set whether to use Answering Machine. Set a ringing time for answering.
Network Service Roaming settings Phone ringtone Request number notification for calls without phone number with guidance. Set action for a second call. Notify incoming calls by message (SMS) while the power is off or you are out of service area. English Switch the voice guidance guidance to English or Japanese. Remote Set to operate Voice operation Mail Service or Call settings forwarding Service using land-line phone, public phone or DOCOMO mobile phone, etc.
Phonebook ■ Phonebook list screen On the phonebook list screen, you can view details of your contacts. You can add a photo or image to a phonebook entry, and display phonebook entries by group. On the phonebook, you can enter various information for contacts, for example, phone numbers, mail addresses and various service accounts. fg h i a Displaying phonebook 1 From the Home screen, u [docomo phonebook]u"Contacts" tab. ･ The phonebook list screen appears.
k Index character area ･ Tap index character to display phonebook entries allocated to the index character. l Index ･ Display the index character to search entries in the order of Japanese syllabary, alphabet, etc. Managing phonebook Adding a new phonebook entry 1 2 From the Home screen, u [docomo phonebook]u"Contacts" tabu[Register]. On the Profile screen, enter necessary information such as name. ･ 3 To add items, tap [Add other items]. [Save].
Registering a phonebook entry to Favorites 1 From the Home screen, u [docomo phonebook]u"Contacts" tabuSelect a phonebook entry to add to Favorites. 2 On the Profile screen, tap . ❖Information ･ Settings International use setting for docomo phonebook docomo ID/Wi-Fi settings Contacts display order Accounts to display To display phonebook entries added to Favorites, on the phonebook list screen, tap "Group" tabu[Favorites].
Setting phonebook entries to Group 1 2 3 From the Home screen, u[docomo phonebook]u"Group" tab. Tap a group. [Add member]uMark phonebook entries to addu[OK]u[OK]. ❖Information To cancel group setting, in Step 3, [Delete member]uMark phonebook entries to deleteu[OK]u[OK]. ･ When you set Google account etc., display groups by account. You can set/cancel group in the same account. ･ Creating a new group in the phonebook 1 2 3 ❖Information Groups in docomo account can be sorted.
Importing/Exporting phonebook entries You can export/import phonebook entries from/to a microSD card or docomo mini UIM card. This is useful, for example, when you want to move the contact information to another phone. ･ You can also use a synchronization service for synchronizing your phonebook (P.147). ･ Insert a microSD card in advance (P.172). 1 2 From the Home screen, u [docomo phonebook]u"Contacts" tabu u[Import/Export]. Select an item. After this step, follow the onscreen instructions.
Mail/Web browser docomo mail Message (SMS) Send/receive mails using DOCOMO mail address (@docomo.ne.jp). Pictograms and Deco-mail can be used, and automatic reception also is supported. Sent/received mails are stored to docomo mail server. Mails can be transferred readily in case the terminal is lost or you change the model. Additionally, with docomo ID, you can use mail on your desired environment such as a PC or tablet. For details of docomo mail, refer to NTT DOCOMO website.
❖Information ❖Information You can change default messaging application to Hangouts. From the Home screen, u[Settings]u[More...] u[Default SMS app]u[Hangouts]. ･ You can also send/receive text messages to/from customers of overseas network operators. For details, see "Mobile Phone User's Guide [International Services]" or the DOCOMO International Services website. ･ To send SMS to users of overseas network operators, enter "+", "Country code" and then "the recipient mobile phone number".
Deleting a message (SMS) 1 2 3 4 From the Home screen, u[Messaging]. Tap a sender/recipient whose messages (SMS) to delete. Touch and hold a message (SMS) to delete. [Delete message]u[Delete]. ❖Information To delete several messages (SMS), in Step 3, u[Delete messages]uMark messages (SMS) you want to deleteu u[Delete]. ･ Deleting messages (SMS) by sender/recipient 1 2 3 From the Home screen, u[Messaging]. Touch and hold a sender/recipient you want to delete. u[Delete].
Email You can create a POP3 or IMAP compatible email account provided by general ISP (provider), or an Exchange ActiveSync account to send or receive email. You can set multiple Email accounts. Making initial setting for Email Set an Email account following the onscreen instructions. 1 From the Home screen, u[Email]. ･ 2 Set check frequencyuMark required itemsu[Next]. ･ 5 If a screen for selecting type of account appears, tap an email account type and follow the onscreen instructions to set.
Creating and sending email 1 2 3 From the Home screen, u[Email]. (Compose). Enter the email address of recipient. Tap to select from the registered contacts. Enter in the search box at the top of the screen to display the contact list. ･ To enter multiple email addresses directly, separate with a comma (,) and then enter the next email address. ･ To add Cc or Bcc recipients, tap u[Show Cc/Bcc]. ･ 4 5 Enter a subject and message. [Send].
Setting preview of Inbox 1 2 3 4 From the Home screen, u[Email]. Tap u[Settings]u[General]u [Preview pane]. Mark a screen to preview. [OK]. ❖Information If you have two or more accounts, change made in any of the accounts applies to all accounts. ･ To switch to the landscape view, turn Auto rotate screen on beforehand (P.42). ･ Saving attachment file of email 1 2 3 Replying/Forwarding email 1 2 ･ 3 4 When attached file is not loaded, tap [Load]. Tap [Save] of file you want to save.
Changing Email account settings 1 2 3 From the Home screen, u[Email]. u[Settings]. Tap an Email account you want to change the settings for. Change account name. Change your name (sender name). Signature Change your signature. Quick reply Register phrase that can be inserted when creating an email. Default account Set whether the account is the default account for creating emails. DATA Inbox Set whether to check new USAGE check messages automatically frequency and intervals of automatic check.
Gmail Set a Google account. You can use Gmail to send and receive emails. ･ If you do not set a Google account, set following the onscreen instructions (P.168). ･ If you do not synchronize Gmail after Google account is set, "Account not synced" screen appears. Follow the onscreen instructions. ❖Information For details on Gmail, from the Home screen, tap u[Gmail]u u[Help]. ･ Sending Gmail 1 2 3 From the Home screen, u[Gmail]. (Compose). Enter the email address of recipient.
- When a SIM other than by DOCOMO is inserted - While sending/receiving a message (SMS) ･ Area Mail may not be received when tethering is set or during packet communications. ･ Area Mail that could not be received cannot be received later. Receiving Early Warning "Area Mail" A notification content screen appears and you are notified by dedicated buzzer sound or dedicated ringtone and vibration. ･ Buzzer sound and ringtone sound volume cannot be changed.
Setting Early Warning "Area Mail" 1 2 3 From the Home screen, u[Disaster kit]. [Early Warning "Area Mail"]. u[Settings]. Receive setting Beep tone Set whether to receive Area Mail. Set sounding time for Area Mail reception and whether to sound a dedicated ringtone even in silent mode. Check screen Check the ringtone and screen for image and reception of earthquake early warning, beep tone tsunami warning or disaster/ evacuation information.
❖Information ･ To copy text on web page, touch and hold a text you want to copyuDrag or to select a range of text to copyuTap (Copy). Changing tabs 1 Adding a new tab Open multiple tabs and view web pages. 1 From the Home screen, u u . Closing a tab 1 Opening incognito tab You can view web pages without browsing history or search history. 1 From the Home screen, u u u[New incognito tab]. 2 Display a web page. In incognito tab, is displayed on the left side of address entry field.
Changing the Browser settings Opening a bookmark Set homepage, privacy and security, etc. 1 From the Home screen, u u[Settings]. Select an item to change. 2 1 2 Operating links Touch and hold a link or image in web page to copy URL or save the image. ❖Information In some website, downloading of files etc. may not be available. ･ Managing bookmarks and history You can check history, save bookmarks, etc. Bookmarking a web page 1 2 3 From the Home screen, uDisplay a web page u[Save to bookmarks].
Apps dmenu In dmenu, you can easily access sites recommended by DOCOMO or convenient applications. 1 From the Home screen, [dmenu]. ･ Browser is activated, "dmenu" appears. ❖Information To use dmenu, Internet connection by packet communication (LTE/3G/GPRS) or Wi-Fi is required. ･ For connecting dmenu and downloading applications introduced in dmenu, packet communication charge is applied separately. Some applications automatically perform packet communications.
❖Information Make sure the security of application, then install it at your own risk. The terminal may be infected with a virus and the data may be damaged. NTT DOCOMO is not liable for malfunctions, if any, caused by the application you installed. In such case, the repair is charged even during the warranty period. NTT DOCOMO is not liable for any disadvantage brought to you or any third party due to an application you installed. Some applications automatically perform packet communications.
The data in the IC card*1 or the docomo mini UIM card*2 may be lost or altered because of the malfunction of the terminal (when we repair your terminal etc., as we cannot repair it with data remained, you are required to erase the data yourself ). For support such as reissuance, restoration, temporary preservation or transfer of data, contact Osaifu-Keitai compatible service providers. For important data, be sure to use a service with backup service.
Using " かざしてリンク対応サービ ス (Kazashite-Link compatible service)" 1 2 From the Home screen, u[Settings]u[More...]. [NFC/Osaifu-Keitai settings]uMark "Reader/Writer, P2P"u[OK]. ･ 3 Notes on holding over the device Please note the following when holding the terminal over an IC card reader or NFC module equipped device. NFC Reader/Writer, P2P function is enabled, and appears in the status bar. Hold the mark over a device with the NFC module or a smart poster.
Locking Osaifu-Keitai function Use "NFC/Osaifu-Keitai lock" settings to restrict the use of Osaifu-Keitai function and related services. ･ NFC/Osaifu-Keitai lock is different from screen lock for the terminal, SIM card lock. 1 2 3 From the Home screen, u [Settings]u[More...]. [NFC/Osaifu-Keitai settings]u [NFC/Osaifu-Keitai lock]. Enter a passwordu[Next]. When using "NFC/Osaifu-Keitai lock" for the first time, enter a password to set.
ToruCa ToruCa is an electronic card that can be obtained by the terminal. It can be obtained from site or an IC card reader as store information, coupon ticket, etc. Obtained ToruCa is saved to the "ToruCa" application and can be displayed, searched, and updated using "ToruCa" application. For details of ToruCa, refer to NTT DOCOMO website. ❖Information ･ ･ ･ ･ ･ ･ ･ For obtaining, displaying or updating ToruCa, a packet communication charge may be applied.
･ Using Shift Time mode or recording requires memory in the internal storage or microSD card. Using a Class 4 or faster microSD card is recommended (Storage can be selected). Broadcast wave and service area The radio wave received via Mobacas differs from that of received via Xi/FOMA service and 1Seg/terrestrial digital broadcasting (Full seg).
Watching Mobacas 1 2 From the Home screen, [NOTTV]. ･ For the first activation, initial settings are executed. Confirm the application license agreement and tap [ スタート (Start)]. Perform the initial settings in a place with good communication environment. Searching for a program/ content Searching from program table (Real Time) 1 2 Tap a thumbnail of program/ content. ❖Information ･ ･ ･ ･ ･ ･ ･ ･ When watching Real Time program, you can select channels by flicking the screen left or right.
Reserving a program/content Reserving Shift Time reception 1 2 3 4 From the Home screen, [NOTTV]. [ 番組表 (Program guide)]u[ シフトタ イム (Shift Time)]. Tap a program/content you want to reserve. [ 予約する (Reserve)]u[1 回のみ予約す る (Reserve only once)]/[ シリーズ予 約する (Reserve in series)]. ･ When a message appears, follow the onscreen instructions.
❖Information Programs may not be received/recorded in the following cases : when the power is off while a program is broadcasted, when the battery is low, when the terminal is in a poor reception area such as out of the Mobacas service area etc., microSD card is not inserted, available memory space in the microSD card/internal storage is low. ･ Programs recorded in the microSD card or internal storage can be watched only on the terminal. ･ Some programs may not be recorded.
Set whether to block (Age age restricted programs. restriction for (Parental watching) control) 年齢設定 (Age Set age to restrict. setting) パスワード変更 Change password. (Change password) ソーシャル Twitter 連携解 Set whether to link to (Social) Twitter. 除 (Cancel Twitter link) Set whether to prevent 詳細設定 重複録画防止 (Advanced) (Prevent from recording the duplicative same contents for recording) schedule by series/ keyword.
TV TV is an application with which you can switch between Full seg and 1Seg and watch according to the air wave reception condition. In addition, since the data broadcasting can be received with images and sounds, interactive service using communication function of mobile devices and receiving detailed information are available. With Full seg, you can watch a terrestrial digital TV broadcasting service in high-vision quality.
Airwaves Full seg and 1Seg are broadcast services and a different type of radio waves (airwaves) from that of FOMA service is received. Therefore, regardless of whether you are in or out of Xi service or FOMA service area, it cannot be received where airwaves do not reach or during broadcasting interruptions.
i j Record icon Channel selection key ･ Touch and hold / to search available channels. k Data broadcasting ･ For 1Seg programs, data broadcasting can be viewed only in the portrait screen. l Data broadcasting remote control ❖Information ･ ･ ･ ･ ･ ･ ･ ･ To show/hide icon such as option menu, on the TV watching screen, tap an image. While watching TV, press the volume key to adjust the sound volume. You can watch TV in the portrait screen or landscape screen (P.42).
Reserve recording or watching programs or display failed reservation list (P.116). TV link Display TV link list screen (P.115). Change area Register or change broadcasting area. Subtitle/Sound/Video Enable/disable subtitle setting display and set subtitle position* and main/sub sound. Settings 1seg/Fullseg Set for switch of Full seg/ switching 1Seg. Superimpose Set whether to display setting superimpose for Full seg or select a superimpose language.
3 Tap a broadcasting station to change the remote control numberuTouch and hold an image. 3 4 Touch and hold a number of remote control you want to set to. ･ 5 [YES]. ･ If you select a number of remote control which is already assigned to another broadcasting station, [Overwrite registered channel]uTap [YES]. ❖Information To delete set broadcasting stations, touch and hold a broadcasting station to delete in Step 3u[Delete channel]uTap [YES]. ･ Select a TV link.
Playing a recorded program 1 2 3 From the Home screen, u[TV]. u[Recorded program list]. Tap a program you want to play. Using program guide 1 2 From the Home screen, u[TV]. u[Program]u[Program guide]. ･ ❖Information Touch and hold a program to change or delete title. In Step 3, tap to set play mode, delete all, display available memory. ･ ･ Reserving recording/viewing TV program Reserve recording/viewing TV program. 1 2 3 4 5 From the Home screen, u[TV]. u[Reserve Recording/ Viewing]u .
❖Information Existing FM radio You can return to the Home screen and perform other operations while listening to the FM radio in the background. To return to the FM radio screen, from the Home screen, u[FM radio], or drag the status bar downwardsu[FM radio]. ･ If you cannot receive Japanese FM radio programs because the docomo mini UIM card is not inserted etc., from the Home screen, tap u[FM radio]u u[Set radio region]u[Japan]. Before using FM radio, check your area.
About the Copyright and Portrait rights Movies, still images, and sounds recorded on the terminal are prohibited by the copyright law from use without consent of the copyright holders, unless intended for personal use or any other purpose permitted by law. Also, using or transformation of other person's portrait or name without his or her permission may violate the portrait right. When you post recorded images etc. on the Internet web pages etc., make sure to be aware of the copyright and portrait right.
e f Auto focus frame Display area for status icons ･ Icons of set items such as Self-timer, Geotagging, etc. are displayed. g Thumbnail ･ Tap a thumbnail to open viewing/playback screen for still pictures/videos taken (P.130). h Shutter icon (still picture) i Start/stop recording icon (video) j Scene selection icons ･ When the capturing mode is set to "Superior auto", an icon for scene detected by the camera is displayed. When the fixation of camera or movement of object is detected, the icon appears.
AR effect Shoot still pictures or videos in the virtual world such as age of the dinosaurs, under the sea, etc. Creative effect Shoot impressive still pictures or videos with various shooting effects. Vine Create "6-second looping video" from a shot video to share. Shoot while touching the shooting screen and the shooting stops by releasing the finger. Looping video is automatically created when the shooting is finished. Info-eye™ When a still picture is shot, information of the object is acquired.
- Shooting an object with constantly changing pattern such as a wave, waterfall, etc. ･ If shooting angle does not reach the required value for Sweep Panorama within a certain period of time, the part which was not taken is recorded in gray. To avoid this, move the camera faster when shooting. ･ Because two or more images are joined together, joints may not recorded smoothly. ･ Images may be blurred or may not be taken in a dark scene.
■ 1 2 Shooting with the camera key Press and hold k for over a second. Press k. ･ To shoot still pictures using auto-focus function, press k halfway and when the auto focus frame turns blue and you hear a beep, press k all the way until it stops. Recording videos ■ 1 2 Shooting with the start/stop icon Press and hold k for over a second. Tap ･ / to start/stop shooting. When the shooting mode is set to"Manual", tap to display the video shooting screen, then tap .
■ Shooting with the camera key Set the capturing mode to "Manual", "4K video" or "Timeshift video", display the video shooting screen and then start shooting. 1 Press and hold k for over a second. 2 Tap the capturing mode iconu[Manual]/[4K video]/ [Timeshift video]. ･ 3 When the shooting mode is set to"Manual", tap to display the video shooting screen. Press k to start/stop shooting. ❖Information Recorded videos are automatically saved in the internal storage or a microSD card.
■ Video resolution (only for video) Set the resolution for video. An image with a higher resolution requires more memory. ･ When the capturing mode is set to"Superior auto" or "Creative effect", shoot in "Full HD", or when it is set to "Timeshift video" or "AR effect", shoot in "HD". ■ ■ Self-timer Shoot after set period of time (seconds) elapses. You can also use the Self-timer to avoid camera shake when shooting still pictures.
Average Adjust the exposure based on the brightness of the whole shooting screen. Spot Measure photometry only at the center of the shooting screen to adjust the exposure. ■ Soft skin effect (only for shooting with Front camera) Set whether to shoot a picture making human skin look smoother. ■ ■ ■ Quick launch Set behavior when using Quick launch (P.128). ■ Geotagging Set whether to tag still pictures/videos location information (geotag) for the shooting spot.
■ Touch capture Set whether to shoot by taping the shooting screen. ■ ■ Set function for assigning with the volume key. Tap the icon displayed on the shooting screen to change the setting. ･ The displayed icons vary depending on the capturing mode. Data storage ■ Use Volume key as Set the saving location for shot still pictures/ videos. ❖Information ･ Changing settings from the icon on the screen Some settings cannot be used in combination with one another.
■ Scene selection Select a shooting scene. Suitable shooting condition for the selected scene is set. Off Shoot without the scene set. Soft skin Shoot a picture making human skin look smoother. Soft snap Shoot a picture making human skin look bright and beautiful. Anti motion blur Reduce blur when taking portraits indoors. Landscape Shoot landscape depicting blue sky or plants with vivid color and focusing on distant objects.
Fireworks Shoot a crisp and clear images of fireworks. Due to long exposure time, be careful not to shake camera. ■ Exposure value (EV)/White balance Tap or drag the bar to adjust the exposure value. White balance is automatically adjusted depending on the light source. Auto Adjust to the light source automatically. Incandescent Adjust for lighting like incandescent bulb. Fluorescent Adjust for lighting like fluorescent. Daylight Adjust for a sunny place. Cloudy Adjust for a cloudy sky or shaded area.
Shooting with Face detection Shooting with Smile Shutter Focus on a face located away from the center. Shoot smile face. When the capturing mode is set to "Superior 1 Press and hold k for over a auto", face detection works automatically. second. 1 Press and hold k for over a second. 2 2 Tap the capturing mode iconu[Manual]. 3 ･ 3 4 5 4 u" " tab/" " tabu[Focus mode]u[Face detection]ux. Point the camera at the object. ･ Detected faces are framed (up to 5 faces).
❖Information Album Depending on the number of saved images, it may take some times to load images. ･ To zoom in/out images, pinch out/in on the image list screen. ･ View/play photos or videos. Displaying photos/videos From the Home screen, [Album]. ■ Image list screen 1 a b c Viewing a photo/video 1 From the Home screen, [Album]uTap a photo/video. For Burst with longpress files, tap a photo. ･ For Timeshift burst files, tap the screenuTap to check all saved photos. ･ For video files, tap .
■ Photo viewing screen ･ Operating image files Video playback screen (P.133) c de 1 From the Home screen, [Album]uTap a photo/video. 2 Tap a screen. Upload to online service, send via Bluetooth or mail, copy/move to microSD card. Play in slideshow, edit, register or check the detail information. When "Throw" is selected, files can be shared between DLNA device, Bluetooth device or screen mirroring compatible device and the terminal. a b f gh a Location information ･ Tap to add geotagging.
YouTube YouTube is a free online video streaming service. You can play, search for and upload videos. ･ A packet communication charge is applied when downloading or uploading video content using mobile networks. Playing YouTube video 1 From the Home screen, u[YouTube]. ･ 2 If you do not set Google account, the Google account setting screen appears. Follow the onscreen instructions. Media Player Play back music and videos stored on the internal storage or a microSD card using Media Player.
■ ❖Information Music playback screen ･ a b d e f g h You can return to the Home screen to perform another operation while listening to music in the background. To return to the music playback screen, from the Home screen, tap u[Media Player], or drag the status bar downwardsuTap the name of song that is being played.
g Auto-rotate screen ON/OFF ･ Tap to turn red and disable Auto-rotate screen. h Volume control ･ Alternatively, on the playback screen, press the volume key to adjust the volume. ❖Information ･ While in landscape view, tap the screen to display option menu icons etc. Ending Media Player 1 On the Media Player screen/song player screen/video player screen, u[Exit]. Location services Your current location can be positioned using GPS, Wi-Fi, or mobile network.
You cannot use the terminal as a navigation device for an aircraft, vehicle, and person. Note that DOCOMO shall have no liabilities whatsoever even if you suffer damage or loss while performing a navigation using the location information. ･ You cannot use the terminal as a highaccuracy measurement GPS. Note that DOCOMO shall have no liabilities whatsoever even if you suffer damage or loss due to a deviation of the location information. ･ Global Positioning System (GPS) is created and managed by U.S.
Activating GPS/Location services You can position current location using GPS, Wi-Fi or information sent from base stations of mobile network. 1 From the Home screen, u[Settings]. 2 [Location]uTap of "Location" or drag it right. 3 Confirm the Attention and [Agree]uRead the Location consent and [Agree]. Finding the current location on the map You can detect your current location using location information service. ･ To detect current location, enable Location (P.136) beforehand.
Searching for a location 1 2 3 4 From the Home screen, u[Maps]. Fill out the search bar. on the software keyboard. Tap a destination. Schedule Displaying schedule 1 From the Home screen, u[Schedule]. Displaying information For the first activation, on the 「スケ ジュール＆メモアプリ」ソフトウェア使 用許諾規約 ("Schedule & Memo Display information such as traffic information etc. on the map. application" license agreement) screen, tap [ 同意する (Agree)]. 1 2 From the Home screen, u[Maps]. uSelect information to display.
❖Information ･ When an alarm of event is set, appears on the status bar at the set time. Drag the status baruTap [It's time] to display details of the event. ❖Information Tap [Free word search] in Step 3uEnter a search wordu[OK] to search and display the input information in [Input title], [Input text] and [ どこで？ (place)]. ･ Displaying events of Schedule 1 From the Home screen, u[Schedule]uDisplay scheduled date/time. ･ 2 Use alarm, world clock, stop watch and timer.
Stopping alarm 1 While alarm is sounding, drag to the right. ❖Information If you tap [Snooze], the alarm sounds again when the set time has passed. ･ Using World clock Using Stopwatch 1 2 3 Using Timer Display the date and time etc. in cities around the world. 1 From the Home screen, u[Alarm & clock]u" " tab. uSelect a city. 2 3 1 2 ❖Information Time display during day-light saving time may differ from time difference displayed on the screen when adding a city in Step 2.
Backing up/Restoring to/from Data Storage BOX docomo backup With docomo backup, you can back up or restore data to/from " データ保管 BOX (Data Storage BOX)" or "microSD card". ･ Do not remove microSD card during backup or restoring. Doing so may damage the terminal data. ･ If the battery is low, backup or restore may not be done. In that case, charge the terminal and retry to back up or restore. ･ docomo apps password is required to back up or restore (P.160).
･ Note that use of Periodical backup may cause high packet communication charge. Restoring 1 From the Home screen, u[docomo backup]u[Backup/ restore to docomo cloud]. 2 3 [Restore]. Tap [Select] on data type to restoreuMark data to restoreu[Select]. ･ 4 5 Tap [Select latest data] to select the latest data for each data type. [Overwrite]/[Add]u[Start restore]u[Restore]. Enter docomo apps passwordu[OK].
Restoring 1 From the Home screen, u[docomo backup]u[Backup/ restore to microSD card]. 2 3 [Restore]. Tap [Select] on data type to restoreuMark data to restoreu[Select]. ･ 4 5 Tap [Select latest data] to select the latest data for each data type. [Overwrite]/[Add]u[Start restore]u[Restore]. Enter docomo apps passwordu[OK]. Copying phonebook entries registered in Google account to docomo account You can copy contacts data registered in Google account to docomo account.
Settings Wi-Fi Viewing the setting menu 1 From the Home screen, u[Settings]. WIRELESS & NETWORKS DEVICE PERSONAL ACCOUNTS SYSTEM P.143 P.153 P.160 P.167 P.169 WIRELESS & NETWORKS Wi-Fi Bluetooth Data usage Xperia™ Connectivity More... Airplane mode Default SMS app Tethering & portable hotspot VPN Mobile networks NFC / Osaifu-Keitai settings P.143 P.175 P.146 P.147 P.148 P.89 P.150 P.152 P.149, P.187 P.101, P.
■ Reception interference caused by Bluetooth devices Bluetooth devices and wireless LAN (IEEE802.11b/g/n) devices use the same frequency band (2.4GHz). If you use Bluetooth devices near a wireless LAN device, reception interference may occur or the communications speed may lower. Also, you may hear noise or have a connection problem. Communication may be interrupted or sound may be lost while streaming data, etc.
Deleting connecting Wi-Fi network setting 1 2 3 From the Home screen, u[Settings]u[Wi-Fi]. Tap the Wi-Fi network that is currently connected. [Forget]. Adding a Wi-Fi network manually ･ Turn Wi-Fi on beforehand (P.144). 1 2 3 From the Home screen, u[Settings]u[Wi-Fi]. uEnter a network SSID of the Wi-Fi network you want to add. Tap "Security" setting itemuTap a security type of the Wi-Fi network you want to add. ･ 4 options, "None", "WEP", "WPA/WPA2 PSK", or "802.1x EAP", appear.
Advanced Wi-Fi optimization Auto IP support Passpoint Passpoint networks MAC address IP address Set wether to control the battery power consumption when Wi-Fi is on. Enable/disable Auto IP function. Set whether to connect to available Passpoint network automatically. Set Passpoint network. Check MAC address. Check IP address. Using Wi-Fi Direct compatible device You can connect among the devices compatible with Wi-Fi Direct via Wi-Fi even without configuring access point. ･ Turn Wi-Fi on beforehand (P.
･ Change the setting value for data usage limit and the value for alert by dragging the right end of each bar in the graph. Setting Data usage cycle 1 From the Home screen, u[Settings]u[Data usage]. 2 Tap "Data usage cycle" setting itemuSet period/[Change cycle...]. ･ When you tap [Change cycle...], select reset dateu[Set]. * You need to set your online service account (Google account, Facebook account, etc.) in the terminal to synchronize in advance.
Windows tethering Display the description about Windows tethering. To connect by Windows tethering, set the following beforehand. ･ Turn on Bluetooth function of the terminal and the PC (P.175). ･ Set security of Portable Wi-Fi hotspot to "WPA2 PSK" (P.151). ･ Pair the terminal and a PC whose OS is Windows 8.1 or later via Bluetooth (P.176). DUALSHOCK™3 Use a commercially available wireless controller USB host cable to connect DUALSHOCK™3 wireless controller to the terminal.
Setting an access point An access point for connecting to the Internet (sp-mode) is already registered. You can add or change it if necessary. For using mopera U, Business mopera Internet add the access point manually. For details on mopera U, refer to mopera U website. Checking the access point in use 1 From the Home screen, u[Settings]u[More...]u[Mobile networks]u[Access Point Names]. ･ It is recommended that you use the displayed access point without editing.
sp-mode sp-mode is ISP for NTT DOCOMO smartphone. In addition to accessing Internet, you can use the mail service using the same address as i-mode mail (@docomo.ne.jp), etc. sp-mode is a service requiring subscription. For details on spmode, refer to NTT DOCOMO website. Setting USB tethering 1 2 When you connect microUSB cable etc. for the first time, the driver software for the terminal is installed to a PC. Wait for a while until installation is completed.
Setting Wi-Fi tethering 1 2 3 From the Home screen, u[Settings]u[More...]u [Tethering & portable hotspot]. [Portable Wi-Fi hotspot]. Confirm "Details"u[OK]. ❖Information If Wi-Fi tethering starts while connecting to Wi-Fi network or the terminal and DLNA device are connected via Wi-Fi network, Wi-Fi network is disconnected. Wi-Fi network is automatically connected when Wi-Fi tethering ends. ･ Wi-Fi tethering can be used with USB tethering or Bluetooth tethering at the same time.
Connecting to a VPN (Virtual Private Network) ❖Information ･ To edit/delete VPNs, touch and hold a VPNu[Edit profile]/[Delete profile]. Use Virtual Private Network (VPN) to connect to the information in a protected local network such as companies, schools or other facilities from outside. Connecting to a VPN ❖Information 2 3 ･ ･ If you set sp-mode as an ISP, you cannot use PPTP.
Clear viewed notifications DEVICE Personalization Home Call settings Sound Display Storage Power management Apps P.153 P.154 P.81, P.191 P.154 P.155 P.157 P.158 P.158 Personalization Motion Xperia™ themes Wallpaper Preferred apps settings Lock screen Quick settings Set whether to answer or reject call without touching the screen while receiving. You can change themes for the Home screen, wallpaper of the lock screen, etc. P.
Hi-Res Audio via USB Home Change the home application for the terminal. ･ If you change the Home application, the lock screen, phonebook application and application for playing videos or music are also changed. Simple Home docomo LIVE UX Xperia™ Home P.50 P.69 P.47 Vibrate when ringing Sound Sound effects Volumes Phone ringtone Increasing ringtone* Notification sound Dial pad touch tones ClearAudio+ The sound setting for music recommended by Sonny.
❖Information ･ For silent mode, see "Setting silent mode" (P.42). When volume of "Music, video, games & other media" is muted (Volume 0), ringtone or notification sound cannot be heard. ･ Adjusting each sound volume Adjust volumes for playing media, ringtone, notification sounds and alarms. 1 2 3 From the Home screen, u[Settings]u[Sound]u [Volumes]. Drag the slider to the right or left. [OK]. ❖Information Even if alarm volume is set in Volumes, set in "Alarm & clock" app is given priority (P.138).
Smart backlight control Daydream Font size Tap to wake up Notification light Set the backlight not to turn off when you use the terminal holding with your hand even while touch operation is not performed. P.156 Set font size. Set whether to turn on the backlight by double-tapping the screen when the backlight is turned off. Set whether to notify missed call etc. with blinking notification LED. * Image quality improving procedure for still pictures is effective only for viewing in "Album" application.
Storage Check or format memory volume of device memory (internal storage), microSD card, and USB storage. DEVICE MEMORY SD CARD EXTERNAL USB STORAGE Check available memory space of internal storage, etc. Total space Check available memory space etc. of microSD card. Unmount SD Cancel connection of card*1 microSD card to remove it safely. Mount SD Have microSD card card*1 recognized. Erase SD Format microSD card. card*1 Total space Check available memory space of USB storage.
Power management Restrict functions in sleep mode for specified applications to reduce battery consumption. Low battery mode Set time before going into sleep mode, screen brightness, and whether to turn off functions when the battery level becomes lower than set level. Location-based When entering to the registered Wi-Fi Wi-Fi network area, the terminal connects the Wi-Fi network automatically to reduce the battery power consumption. Battery usage Display remaining battery level, battery consumption,etc.
Deleting application data or application ･ Before deleting application data, back up contents that you want to save including data saved in the application. 1 2 From the Home screen, u[Settings]u[Apps]. Tap an application to delete. To delete application data, tap [Clear data]uRead the note and tap [OK]. ･ To delete application, tap [Uninstall]u[OK]. ･ ❖Information Some applications pre-installed cannot be deleted (uninstalled).
Send device error information PERSONAL docomo service/cloud Location information Security Language & input Backup & reset Setup guide P.160 P.161 P.161 P.166 P.167 P.39 docomo service/cloud Set docomo ID for using docomo ID 設定 (docomo ID setting) docomo applications. docomo cloud Make settings for docomo cloud compatible service. Application Manage to install applications manager provided by NTT DOCOMO and set to check updates for applications regularly.
Location Location Mode RECENT LOCATION REQUESTS LOCATION SERVICES Security P.136 Set a mode to identify location information. Display the application using the recent location information data and battery usage amount. Set wether to allow applications to access the location information. Screen lock P.164 Improve face Improve face unlock accuracy. matching*1 Liveness check*1 Set whether to require blinking for unlocking by Face Unlock.
Unknown sources Set wether to permit installing before downloading unknown sources application. Some applications may be of unknown origin. To protect the terminal and personal data, only download applications from trusted sources. Verify apps Set whether to prohibit installation of possibly harmful applications or to warn before installation. Storage type Show type of credential storage. Trusted Display trusted CA credentials. credentials Install fr. internal Install encrypted certificates.
･ ■ The PUK code is written on the subscription form (copy for customer) handed at the subscription in the docomo Shop. If you subscribed other than docomo Shop, you must bring your official identification (such as drivers license), the docomo mini UIM card with you to the nearest docomo Shop or contact the "General Inquiries" on the last page. ■ PIN code You can set security code which named PIN code to docomo mini UIM card. It is set "0000" at the subscription. They can be changed by yourself.
Enabling SIM card lock Changing the PIN code By entering PIN code when powered on, you can protect from improper use. ･ 1 From the Home screen, u[Settings]u[Security]u[Set up SIM card lock]u[Lock SIM card]. 2 Enter PIN codeu[OK]. Entering the PIN code when powered on 1 2 On the PIN code entry screen, enter the PIN code. . You can change only when you activate the SIM card lock. 1 From the Home screen, u[Settings]u[Security]u[Set up SIM card lock]u[Change SIM PIN].
2 Tap a unlock method to set. ･ When you tap [PIN], follow the onscreen instructions to enter 4 - 16 digit numbers. This "PIN" code is different from a PIN code to be set to docomo mini UIM card (P.163). If you forget how to unlock ■ "You have incorrectly drawn your unlock pattern 5 times. Try again in 30 seconds. " appears when you enter incorrect unlock pattern 5 times consecutively.
Language & input Setting Voice Search Language Language Spell checker* Personal dictionary Default Xperia™ Chinese keyboard Xperia™ keyboard Google voice typing Moji-Henshu Xperia™ Japanese keyboard Voice Search Text-to-speech output Pointer speed Change phone language. Set whether to run the spell checker. Register words to the personal dictionary. Select input method. P.
Backup & reset Back up my data Backup account Automatic restore Factory data reset 1 Set whether to back up settings for applications, data, etc. to Google server. Set an account for backup to Google server. Set to restore backup settings or data when re-installing application. P.167 Resetting the terminal Resetting the terminal deletes all data, including downloaded applications and accounts, and resets the terminal back to the initial (default) state.
Setting Google account Setting other account You can set a Google account on your terminal and use Google services such as Gmail, Google Play, etc. You can set multiple Google accounts on the terminal. 1 1 2 From the Home screen, u [Settings]u[Add account]u [Google]. Follow the registration wizard, set a Google account. ❖Information A Google account registered with "Back up data to your Google Account." marked on the "Google services" screen is registered as a backup account.
Accessibility SYSTEM Date & time Accessibility Printing About phone P.169 P.169 P.170 P.170 Date & time ･ To set date/time or time zone manually, unmark "Automatic date & time" or "Automatic time zone" to disable networkprovided time/time zone in advance. Set user support service (TalkBack). Captions Set whether to display captions or set language, font size, etc. for captions. Magnification Set whether to zoom in/out by gestures tapping the screen 3 times. Large text Set whether to use large text.
When touch exploration feature is enabled, you can operate the terminal in the different way from the usual one. To select an item, tap it once and then double-tap it. To drag, tap it once and then doubletap it, then trace the screen to desired orientation. ･ To turn off only Touch exploration, from the Home screen, u[Settings]u[Accessibility]u[TalkBack]u [Settings], then unmark "Explore by touch".
File management Storage structure Phone (internal storage) Folders in the internal storage by default are as follows. ･ Displayed folders may differ depending on the terminal operations. Alarms Android DCIM Download Movies Music Notifications Pictures Podcasts recovery Ringtones Stores alarm sound etc. Stores setting data for system or each application, temporary files, etc. Stores still pictures/videos shot by Camera. Stores downloaded data through Browser.
Inserting microSD card ･ Opening/closing microSD card slot cover (P.24) 1 Open microSD card slot cover and check the orientation of the microSD card, then slowly insert it straight until it clicks. ･ 2 Close microSD card slot cover and press part firmly to check that no gap exists between the terminal and the cover. Insert the microSD card with metal contacts side down.
Removing microSD card Make sure to unmount microSD card (make reading/writing unavailable) before removing. ･ Opening/closing microSD card slot cover (P.24) 1 From the Home screen, u[Settings]u[Storage]u [Unmount SD card]u[OK]. ･ 2 When microSD card is unmounted, " SD card safe to remove" appears in the status bar and notify that microSD card is not available for reading or writing. Open microSD slot cover and push microSD card to the end until it clicks. Then remove microSD card slowly.
Creating new folder 1 From the Home screen, Commander]. 2 3 4 Moving/Copying folder or file u[File From the Home screen, Commander]. Select an itemuTap a folder as required. 2 Select an itemuTap a folder as required. u[Folder]. Enter a folder nameu[OK]. 3 Mark a folder or file you want to move/copy. 4 5 / . Anywhere, Renaming folder or file 1 2 From the Home screen, u[File Commander]. Select an itemuTap a folder as required. u[File 1 From the Home screen, Commander].
･ Data communication Bluetooth function Bluetooth function is a technology which enables to connect with Bluetooth device such as PC, handsfree headset wirelessly. ･ The terminal does not communicate wirelessly with all types of Bluetooth devices. ･ Supported Bluetooth profiles (P.213) ❖Information If you turn off the terminal with Bluetooth turned on, Bluetooth function turns off. When you turn on the terminal again, Bluetooth function turns on automatically.
Making pair setting for the terminal and Bluetooth device To connect the terminal and Bluetooth device, pair them first. ･ Once paired, the setting with the Bluetooth device is saved. ･ For make pair setting, entering passcode (PIN) may be required. Passcode (PIN) of the terminal is "0000". If you cannot make pair setting when you enter "0000", see the documentation of your Bluetooth device. 1 From the Home screen, u [Settings]u[Bluetooth]u[Search for devices].
Disconnecting a Bluetooth device 1 2 3 From the Home screen, u[Settings]u[Bluetooth]. Tap the connected Bluetooth device name. [OK]. ･ To reconnect, tap the Bluetooth device name. NFC communication Sending/Receiving by onetouch function You can send/receive data to/from a device with NFC such as a mobile phone. If you use the one-touch function with a Sony product with NFC, simple operations allow you to send or receive images, music, photos or videos taken with the terminal.
Place 2 mobile phones in parallel position and point marks to each other. Do not move them until sending/receiving is complete. ･ Operations to send/receive and available data to send/receive depend on the compatible applications. Follow the onscreen instructions. ･ If the License agreement screen appears when sending/receiving data, read the content and follow the onscreen instructions. ･ When pointing marks to each other, sending/receiving may fail. In such case, operate again to send/receive.
Selecting NFC Type 1 2 3 From the Home screen, u[Settings]u[More...]. [NFC/Osaifu-Keitai settings]u[NFC Type]. [FeliCa / Type A / Type B (standard)]/[FeliCa / Type A]/ [FeliCa / Type B].
■ Media transfer mode (MTP) External device connection Connecting to PC The terminal is displayed on the PC screen as a portable device and you can access the internal storage and a microSD card in the terminal. Connecting to a PC with microUSB cable By connecting the terminal and a PC with the Micro USB Cable 01 (optional), etc., you can copy, move, delete data, etc. ･ You may not be able to operate copyrighted data of images, music, etc.
Disconnecting the microUSB cable safely ･ Do not disconnect the microUSB cable during data transferring. Data may be damaged. ■ 1 ■ 1 2 3 Media transfer mode (MTP) Confirm that it is not transferring data, disconnect the microUSB cable. Mass storage mode (MSC) Drag the status bar downwards. [SD card connected]. Disconnect the microUSB cable. For Microsoft Windows 8.1, remove the terminal from the PC, click "How to connect" on PC Companion, then follow the onscreen instructions.
5 On the pop-up screen of the terminal, tap [Pair]. 6 On the " ポータブルデバイスのネット ワーク構成 (Network composition of the portable device)" window of the PC, click " 完了 (Done)". ･ Remove the microUSB cable from the terminal and the PC. ❖Information ･ Appeared screen may vary depending on the operating system (OS) of a PC.
4 Tap the waiting DLNA device on the Media server settings screenuSet access level. ･ The DLNA device is registered. Playing media files in the DLNA device with the terminal Playing a media file in the terminal with a DLNA device You can play a media file in the terminal with a DLNA device using Throw function. 1 ･ Play media files in the DLNA device on the terminal. 1 From the Home screen, tap any of [Album]/[WALKMAN]. ･ To play a file in "Movies", from the Home screen, u[Movies].
Connecting to other devices ･ ･ Connecting a TV This terminal supports MHL connection. For an HDMI compatible TV, use a commercially available HDMI connector (MHL adapter) and an HDMI cable etc. to connect to the terminal. Connect to a TV to activate TV Launcher and display photos and videos on the TV screen. 1 ･ Connect to TV using commercially available MHL cable. ･ 2 3 ･ Activate TV launcher automatically. If TV launcher does not activate automatically, , appears on the status bar.
International roaming Overview of International roaming (WORLD WING) With the international roaming (WORLD WING), you can use the terminal without changing phone number or mail address in the service area of the overseas network operator affiliated with DOCOMO. You do not need to change the settings of call and SMS. ■ Supporting networks The terminal is Class 5. The terminal works in LTE network, 3G network and GSM/GPRS network service area.
Checking before overseas use Before leaving Japan To use the terminal overseas, check the following in Japan. ■ Subscription ･ ■ Charging ･ ■ Check if you subscribe WORLD WING. For details, contact "General Inquiries" on the last page. For AC adapter for charging overseas travel, use optional "AC Adapter 03" or "AC Adapter 04".
After arriving overseas Setting a network operator From the Settings screen, u[Settings]u[More...]u[Mobile networks]u[Service providers]. When you arrive overseas and turn on the terminal, an available network is automatically set. 1 Connectivity 2 [Search mode]u[Manual]. 3 From "AVAILABLE NETWORKS", mark a network to use. When you have set "Search mode" of "Service providers" in "Mobile networks" to "Automatic", optimized network is automatically selected (P.187).
Setting network mode 1 2 From the Settings screen, u[Settings]u[More...]u[Mobile networks]u[Network Mode]. Tap any of [LTE (preferred)/3G/ GSM]/[LTE/3G]/[3G/GSM]/[3G only]/[GSM only]. ･ If you select "LTE (preferred)/3G/GSM" to switch available network automatically. Display During international roaming, appears on the status bar. ･ You can confirm the name of the connected network operator on the Notification panel. ❖Note ･ While appears on the status bar, packet communication is available.
Making/Receiving a call in the country you stay When you arrive overseas and turn on the terminal, an available network is automatically set. ･ Check that the battery and signal levels are high enough. ･ Depending on the network operator, even if the Caller ID notification is active, the caller ID may not be notified or appear properly. In this case, calls cannot be made from the call log.
2 Enter a phone number. 3 4 . When the call is finished, tap [End call]. ･ To make a call to land-line phone, enter the area code (city code) + other party's phone number. ❖Information ･ When you received a call during the international roaming, regardless of which country the call is from, it is forwarded internationally from Japan. A caller is charged for a call fee to Japan, and the receiver is charged for a reception fee.
International roaming settings Make settings for using international roaming or international calls. ･ For some overseas network operators, settings may not be made. 1 2 From the Home, u . [Call settings]u[Roaming settings]. Restricting incoming calls Incoming call notification on roaming Roaming guidance International dial assist Network service Set whether to restrict incoming calls during international roaming. Set whether to notify with SMS if you cannot receive calls because of out of service etc.
2 [Call settings]u[Roaming settings]. 3 [Network service]uSelect a target service. Remote operation (charged) Caller ID request (charged) Incoming call notific. (charged) Roaming guidance (charged) Voicemail (charged) Call forwarding (charged) 4 Set whether to start Remote operation. Set whether to start Caller ID display request service. After returning to Japan When you return to Japan, the terminal is connected to DOCOMO network automatically.
Appendix/Index Troubleshooting Troubleshooting First, check if the software update is necessary for the terminal. If necessary, perform the software update (P.204, P.211). ･ When checking the following items not to improve the state, contact the phone number given in "Repairs" the last page of this manual (in Japanese only) or DOCOMO-specified repair office. ･ ■ Power supply Cannot power on the terminal. ･ Check if the battery is not run out. → P.32 Screen is frozen, the power cannot be turned off.
The notification LED blinks in red and the terminal cannot be operated. ･ When the battery level is low, charge the battery. → P.32 ■ Terminal operation Become hot while operating/charging. ･ While calling, depending on the radio wave condition or call duration time, the terminal may become hot. This condition is not abnormal. ･ While operating or charging, or if you watch TV, record video, etc. for a long time while charging the battery, the terminal, internal battery or adapter may become hot.
The docomo mini UIM card is not recognized. ･ Check if the docomo mini UIM card is attached in the right direction.→ P.30 The clock is not on time. ･ The clock time may become wrong when the power is turned on for a long time. Check if "Automatic date & time" and "Automatic time zone" are marked and turn the power off and on in a place with strong radio wave conditions. → P.169 The terminal operation is unstable. ･ Instability may be caused by applications that you installed after purchasing the terminal.
Check if Pick up after in Answering Machine is set to 0 second. → P.81 ･ Check if you set call rejection. → P.81, P.82 Cannot call (Even when moving, does not disappear, or although radio waves are enough, making/receiving calls is unavailable.) ･ Turn the power OFF and ON, or remove and attach docomo mini UIM card. → P.30, P.37 ･ Due to the nature of radio waves, making/ receiving calls may be unavailable even when "not out of service area" or " appears on the display for the radio wave condition".
Use "Superior auto" for the capturing mode. → P.119 ･ When the capturing mode is set to "Manual", you can focus on using Focus mode. → P.124 ･ Set Image stabilizer/SteadyShot™ and shoot. → P.125 ･ To shoot a portrait image, use "Face detection". → P.129 Photo or video shot with flash is whitish. ･ If there is your finger or cover around the camera lens, flash light may reflect and affect photo or video shooting. ･ ■ TV Unable to watching Full seg/1Seg.
The terminal suddenly became unavailable while using overseas. ･ Check if usage amount exceeds the limit of maximum charges for use. For use of "International roaming (WORLD WING)", the limit of maximum charges for use is set in advance. If exceeding the limit of maximum charges for use, pay the charges. Cannot receive calls overseas. ･ Is "Restricting incoming calls" set to "Activate restriction"? → P.
Calls cannot be made from the terminal connecting to external device such as car navigation or handsfree device. ･ If calls are made several times when the other party does not answer or is out of service, the call to this number may be disabled. In this case, turn terminal off and on. ■ Map/GPS Cannot set AUTO-GPS service information. ･ Check if the battery level is low and AUTOGPS function stops. If AUTO-GPS stops due to "Low-power operation settings", AUTO-GPS service information cannot be set.
● Calls are restricted by access control Appears when normal/emergency voice call service is hard to receive because communication lines are busy. ● Restricted access changed Appears when the voice service or data service is not received. ● SIM card is locked Enter your PIN code (P.163) correctly. ● SIM card is PUK-locked Enter your PUK (Personal Unblocking Key) (P.163) correctly. ● PIN lock disable code is locked. PIN lock disable code is locked. Please contact a docomo Shop.
2 From the Home screen, u[ 遠隔サ ポート (Remote support)]. ･ 3 4 5 When you use for the first time, agree to " ソフトウェア使用許諾書 (License Agreement)". [ 遠隔サポートの接続画面に進む (Go to Remote support connection screen)]u[ 同意する (Agree)]. Enter connection number notified by DOCOMO. Remote support starts when you are connected. Warranty and After Sales Services Warranty Make sure that the warranty is received with the terminal upon purchase.
repaired at the owner's expense, even if the warranty period is still effective. ･ Malfunction due to use of devices and consumable parts other than those specified by DOCOMO will only be repaired at the owner's expense, even if the warranty period is still effective. After Sales Services If you have problems with the terminal Before asking repair, see "Troubleshooting" (P.193) in this manual to check the problem. If the problem still persists, contact "Repairs" on the last page (in Japanese only).
■ Parts stock period The functional parts necessary to repair the terminal will be basically available for a minimum of 4 years after the manufacture is discontinued. However, depending on the defective portion, repair may not be possible because of a shortage of repair parts. Note that repair may still be possible depending on the defective portion even if the stock period has expired. Contact "Repairs" on the last page (in Japanese only). Precautions ● Never modify the terminal or accessories.
● The terminal is waterproof. If inside of the terminal gets wet or moist, however, turn the power off, then bring the terminal to a repair office as soon as possible. Note that repair may not be possible depending on the condition of the terminal. Precautions on memory dial (Phonebook function) and downloaded data Note that data you created or data you retrieved or downloaded from sources other than your terminal may be changed or lost when you change the model or have repairs done to the terminal.
Using software update Software update should be done with battery fully charged. You are recommended to connect charging cable when updating software. ･ Software cannot be updated in the following cases.
Updating software automatically 2 Update file is automatically downloaded and software is updated at the specified time. Setting Software update ･ The settings of Software Update is set to "Automatic Update" by default. 1 2 3 From the Home screen, u[Settings]u[About phone]u[Software Update]. [Configure the software update]. [Automatic Update]/[Manual Update]. When software update is necessary If the update file is downloaded automatically, appears on the status bar.
2 3 [Start the software update]u[Yes]. ･ For activating from Software update notice screen, display the Software update notice screenu[Start update]. After a message for rewriting start appears, rewriting starts automatically in approximately 10 seconds. Tap [OK] to start rewriting automatically. ･ While updating the software, all key operations become disabled. Also, updating cannot be canceled. ･ When the software update is complete, the terminal restarts and the Home screen is displayed.
If (Software update was suspended Please check the remaining internal storage capacity and retry.) appears on the status bar during software update, make sure that sufficient memory remains on the phone memory and retry to update. ･ If (Software update was suspended Please check the status of the handset and retry.) appears on the status bar during software update, make sure that the terminal is not in the following states and retry to update.
Notes When Upgrade Android software is performed, restoring the previous Android software is not possible. ･ Upgrade Android software with the battery fully charged. ･ For Upgrade Android software, docomo mini UIM card is needed. For using packet communication, subscription to sp-mode is required. ･ Exit from all applications before upgrading Android software. Activating applications while upgrading may interrupt Upgrade Android software. ･ Do not turn off the terminal while upgrading.
"Not now" : End Upgrade Android software without upgrading software. *1 When "Download" for update file is selected When downloading the update files is complete, installing to the terminal is available. ･ Install now : Immediately install the update file ･ Install later : Install the update file at reserved time. To change the start time, from the Home screen, u[Settings]u[About phone]u[Upgrade Android software], then change start time.
When "Perform at scheduled time (via Wi-Fi/Xi)" is selected, time for downloading is automatically set. Start time cannot be changed. If you do not want to download at the automatically-set time, tap [Upgrade Android software]u[Cancel] to cancel the reservation of downloading. To download update files, from the Home screen, u[Settings]u[About phone]u[Upgrade Android software]u[Start upgrading], then select "Perform now (only via Wi-Fi)".
Main specification ■ Charging time The terminal Product name Size Weight Internal memory External memory compatible Continuous FOMA/3G stand-by time GSM LTE Continuous FOMA/3G call GSM time SO-02G Approx. 147 mm (H)u approx. 73 mm (W)u approx. 8.2 mm (T) (thickest part 8.2 mm) Approx. 163 g ROM : 32 GB RAM : 3 GB microSD card of up to 2GB microSDHC card of up to 32GB microSDXC card of up to 128GB (as of April, 2014) Stationary (Auto) : Approx. 650 hours Stationary (Auto) : Approx.
Camera effective pixels Camera recorded pixels (Max.) Zoom Still picture recording size Video recording size Camera : Approx. 20,700,000 pixels Front camera : Approx. 2,200,000 pixels Camera : Approx. 20,700,000 pixels Front camera : Approx. 2,100,000 pixels Camera : (Still picture) Max. approx. 8.0x (41 levels), (Video) Max. approx. 8.0x (31 levels) Front camera : ― Camera : 5248u3936 (20.7MP 4:3) 5248u2952 (15.
Internal battery *5 May vary by the signal status and/or whether there is an interference between communications devices. *6 Bluetooth standards for Bluetooth device connection procedure according to the product's applications. ･ Continuous stand-by time is an estimate of ■ the stand-by time when radio signal reception is normal. Stationary continuous stand-by time is the estimated average operation time when radio signal reception is normal.
■ File format (media) ■ The terminal supports the display or playback of the following file formats: Type Sound Still image* Video File format WAV (PCM, G.711) (.wav), AAC (.3gp, .m4a, .mp4), AAC+ (.3gp, .m4a, .mp4), eAAC+ (.3gp, .m4a, .mp4), MP3 (.mp3), AMR-NB (.3gp), AMR-WB (.3gp), MIDI (SP-MIDI/GM/ GML (.mid), XMF (.xmf ), Mobile XMF 1.0 (.mxmf ), RTTTL/RTX (.rtttl, .rtx), OTA (.ota), iMelody (.imy)), Ogg Vorbis (.ogg), FLAC (.flac), PIFF (.isma), WMA (.wma) JPEG (.jpeg, .jpg), GIF (.gif ), PNG (.
■ Time length of shooting video (Estimation) (Honduras)/Spanish (Mexico)/Spanish (Nicaragua)/Spanish (Panama)/Spanish (Paraguay)/Spanish (Peru)/Spanish (Puerto Rico)/Spanish (Dominican Republic)/ Spanish (Uruguay )/Spanish (Venezuela)/ Basque/French (Belgique)/French (Canada)/French (France)/French (Switzerland)/Galician/Croatian/Icelandic/ Italian (Italy)/Italian (Switzerland)/Javanese/ Latvian/Lithuanian/Hungarian/Dutch (Belgium)/Dutch (Netherlands)/ Norwegian/Polish/Portuguese (Brazil)/ Portuguese (Por
Persian/Polish/Bosnian/Portuguese/ Macedonian/Malay/Latvian/Lithuanian/ Romanian/Russian/English/Chinese (Traditional)/Chinese (Simplified)/Japanese ■ Arabic (Bahrain)/Arabic (Oman)/Arabic (Palestine)/Chinese, standard (Taiwan, Traditional)/Chinese, standard (China, Simplified)/Chinese, standard (Hong Kong, Simplified)/Chinese, Cantonese (Hong Kong Traditional)/Korean Text language (Voice input) Japanese/Afrikaans/Indonesian/Malay/ Catalan/German/English (Australia)/English (Canada)/English (standard)/Eng
End User Licence Agreement Software delivered with this device and its media is owned by Sony Mobile Communications AB, and/or its affiliated companies and its suppliers and licensors. Sony Mobile grants you a non-exclusive limited license to use the Software solely in conjunction with the Device on which it is installed or delivered. Ownership of the Software is not sold, transferred or otherwise conveyed.
Intellectual Property Right About the Copyright and Portrait rights Copyrighted contents you recorded or obtained from sites or Internet home pages using this product by downloading or other means, such as documents, images, music data, software, are prohibited from reproduction, transformation and transmission over public lines without consent of the copyright holders, unless intended for personal use or any other purpose permitted by law.
Rovi, G-GUIDE, G-GUIDE MOBILE and their logos are trademarks or registered trademarks in Japan of U.S. Rovi Corporation and/or its affiliates. ･ " モバキャス " is a trademark of Japan Mobilecasting, Inc. ･ "NOTTV" and "NOTTV" logo are trademarks of mmbi, Inc. ･ Xperia, TrackID, Info-eye, Socialife and Xperia Lounge are trademarks or registered trademarks of Sony Mobile Communications AB. ･ PlayStation, and DUALSHOCK are trademarks or registered trademarks or Sony Computer Entertainment Inc.
"DLNA" and "DLNA" logo are trademarks or registered trademarks of the Digital Living Network Alliance. ･ MHL, Mobile High-Definition Link and MHL logo are trademarks or registered trademarks of MHL, LLC. ･ HDMI, HDMI logo and HighDefinition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ･ MirrorLink and MirrorLink logo are trademarks or registered trademarks of Car Connectivity Consortium LLC. ･ Linux is a registered trademark of Linus Torvalds,individual.
This product is licensed under the MPEG-4 visual and AVC patent portfolio license for the personal and non-commercial use of a consumer for (i) encoding video in compliance with the MPEG-4 visual standard ("MPEG-4 video") or the AVC standard ("AVC video") and/or (ii) decoding MPEG-4 or AVC video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed by MPEG LA to provide MPEG-4 and/or AVC video.
Index A About phone ････････････････････････ 170 Access point Initializing ･････････････････････････ 149 Setting････････････････････････････ 149 Accessibility ･････････････････････････ 169 Account Removing ･････････････････････････ 168 Setting････････････････････････････ 167 ACCOUNTS ･･････････････････････････ 167 Adjusting sound volume ･･･････････････ 155 Airplane mode ･･･････････････････････ 148 Alarm & clock ････････････････････････ 138 Setting alarm ･･････････････････････ 138 Album ･････････････････････
Brightness ･･･････････････････････････ 156 Browser ･･････････････････････････････ 97 Adding tab ･････････････････････････ 98 Bookmark ･･････････････････････････ 99 History ･････････････････････････････ 99 Incognito tab ･･･････････････････････ 98 Link ･･･････････････････････････････ 99 Searching text･･･････････････････････ 98 Settings ････････････････････････････ 99 C Calculator ････････････････････････････ 56 Calendar ･････････････････････････････ 54 Call･･････････････････････････････････ 75 Calling screen
Connecting TV ･･･････････････････････ 184 Contact docomo ･･･････････････････････ 82 Contact Picker 2.
GPS function ･････････････････････････ 134 H Handwriting ･･････････････････････････ 64 Hangouts ････････････････････････････ 56 HDMI ･･･････････････････････････････ 184 Home･･･････････････････････････････ 154 Home application docomo ････････････････････････････ 69 Switching ･･････････････････････････ 60 Xperia ･････････････････････････････ 47 Home screen ･･････････････････････････ 47 Adding (docomo LIVE UX) ･････････････ 71 Adding (Xperia Home) ････････････････ 48 Deleting (docomo LIVE UX) ････････････ 71
MHL ････････････････････････････････ 184 microSD card Settings ･･･････････････････････････ 157 Structure ･･････････････････････････ 171 Missed call････････････････････････････ 80 Mobacas ････････････････････････････ 105 Reserving ･････････････････････････ 108 Searching ･････････････････････････ 107 Settings ･･･････････････････････････ 109 TV/Mobacas antenna cable ･･･････････ 106 Watching ･･････････････････････････ 107 Moji-Henshu ･･････････････････････････ 68 Movies ･･･････････････････････････････ 54 My Mag
PIN code ････････････････････････････ 163 Play Books ････････････････････････････ 56 Play Games ･･･････････････････････････ 56 Play Movies & TV･･･････････････････････ 55 Play Store ･･･････････････････････････ 100 Deleting ･･････････････････････････ 101 Installing ･･････････････････････････ 100 Playing video ････････････････････････ 132 PlayStation ･･･････････････････････････ 55 PlayStation Mobile ･････････････････････ 54 Portrait view ･･････････････････････････ 42 Power management ･･･････････････････ 158 Pr
Stopwatch ･･･････････････････････････ Storage Settings ･･･････････････････････････ Structure ･･････････････････････････ SYSTEM ･････････････････････････････ 139 157 171 169 T Task manager ･････････････････････････ 59 Tethering ････････････････････････････ 150 Bluetooth tethering ･････････････････ 151 USB tethering ･･････････････････････ 150 Wi-Fi tethering ･････････････････････ 151 Text editing ･･･････････････････････････ 66 Theme Home screen ････････････････････････ 50 Timer ･････････････････････････････
WORLD CALL ･････････････････････････ 77 World clock ･･････････････････････････ 139 WORLD WING ････････････････････････ 185 X Xperia Chinese keyboard ････････････････ 62 Xperia Connectivity ･･･････････････････ 147 Xperia Japanese keyboard ･･･････････････ 62 Help & Tips ･････････････････････････ 62 Xperia Lounge Japan ･･･････････････････ 55 X-Reality for mobile ･･･････････････････ 155 Y YouTube ････････････････････････････ 132 Numerics 1Seg ･･･････････････････････････････ 111 Appendix/Index 230
Make various applications or charge your billing plan, check your charges and points, and more online. sp-mode: dmenu ⇒ " お客様サポート (Customer support)" ⇒ " ドコモオンライン手続きの一覧をみる (See list of docomo online procedures)" (Packet communication free) (In Japanese only) PC: My docomo (https://www.nttdocomo.co.jp/mydocomo/ ) ⇒ ドコモオンライン手続き一覧 (List of docomo online procedures) (In Japanese only) * When using with sp-mode, "Network security code" is required. * When using with sp-mode, you may be charged.
General Inquiries 0120-005-250 (toll free) Repairs ■From DOCOMO mobile phones (In Japanese only) (No prefix) 113 (toll free) *Service available in: English, Portuguese, Chinese, Spanish. *Unavailable from part of IP phones. (Business hours: 9:00 a.m. to 8:00 p.m.) *Unavailable from land-line phones, etc. ■From DOCOMO mobile phones (In Japanese only) (No prefix) 151 (toll free) ■From land-line phones (In Japanese only) *Unavailable from land-line phones, etc.
