User's Manual

65
Before Using the Terminal
g
Move the cursor to the right.
When there is an unfixed character string with the
cursor at the right end, tap to enter the same
character as the one at the end (Except for
Handwriting input).
h
Enter spaces.
In Kana mode, highlight and select word in the
candidate list.
i
Enter a line feed.
*
Appears before fixing character and fixes the
character.
* In some screens, , "
次へ
(Next)", "
完了
(Done)", "
実行
(Go)", etc. appear.
j
Change Xperia
™
Japanese keyboard settings.
k
Return to keypad/QWERTY.
❖
Information
･
To return to the display before conversion after the
conversion is fixed, tap displayed in
つながり予測
(associative) candidate (except in handwriting input
mode) etc.
･
To enlarge the display area, tap in the candidate
list. To display the software keyboard, tap or [
閉じ
る
(Close)].
･
For Handwriting input, tap an icon at the upper left
of entered character to display candidates for the
entered character. Recognized character is displayed
in light blue and characters are displayed at the
bottom of candidate list in different colors by type.
･
For Handwriting input, the following operations are
available.
- When entering 2 or more characters and tapping
the icon at the upper left, appears. Tap to
combine entered 2 characters to 1 character.
- When entering characters, tap to delete
entered characters.
･
Note the following when you use Handwriting input.
- For voiced sound and semi voiced sound mark,
enter in the right upper part of the input screen.
- For punctuation mark and lower case, enter in the
lower part from the center of the input screen.
Character entry with keypad
■
Flick input
Flick up/down/left/right to enter characters
in each column of kana syllabary.
･
Ex: Entering characters in "
な
" column
You can enter "
な
" only by tapping. Flick
left for "
に
", up for "
ぬ
", right for "
ね
" and
down for "
の
".