User's Guide

41
Before Using the Terminal
You can set the screen orientation to switch
between landscape and portrait view
automatically according to the terminal
orientation.
1
Drag the status bar downwards.
2
[Auto rotate].
･
When the setting is enabled,
appears.
❖
Information
･
Even when you change the orientation of the
terminal, the screen may not change to landscape
view depending on the screen such as Home screen,
etc.
･
While charging with the desktop holder, the screen
view may change regardless of the auto rotate
screen setting.
･
Changing orientation of the terminal in nearly
horizontal state against the ground does not switch
to portrait view/landscape view automatically.
1
Drag the status bar downwards.
2
[Sound].
･
Tap to activate silent mode
(vibration) and tap to activate silent
mode (mute). Tap to cancel silent
mode.
❖
Information
･
Alternatively, press and hold
P
for over a
second
u
Tap / / to switch silent modes.
･
Press and hold the volume down key to set vibrator
and press the volume down key while the vibrator is
set to set mute. On the lock screen, during a call, in
some applications such as camera and WALKMAN,
silent mode cannot be set even if the volume down
key is pressed.
･
Setting the terminal to silent mode does not mute
sounds for shutter, playback of video or music, alarm,
dialpad operation sound during a call or sound
emitted when [End call] is tapped, etc.
･
While silent mode is set, adjusting volume for
"Ringtone & notifications" from "Volumes" (P.153) in
Sound or turning up the volume by pressing the
volume up key cancels silent mode.
Switching portrait or landscape
view automatically
Setting silent mode