User's Guide

33
Before Using the Terminal
2
Unfold the power plug of the AC
adapter and insert it into an outlet.
3
Install the terminal to the Desktop
Holder and move it left or right
until it clicks.
･
When the terminal and the Desktop
Holder are correctly connected, the
notification LED of the terminal turns
on (P.42).
4
When charging is complete,
holding the desktop holder, lift the
terminal up to remove.
5
Remove the power plug of the AC
adapter from the power outlet.
6
Remove the microUSB plug of the
AC adapter from the desktop
holder.
Attaching/Removing the
attachment
■
Attaching
1
Check the shape of front/back of
the attachment and the attaching
part of the desktop holder, then fit
the attachment with the desktop
holder.
2
Firmly press the attachment
straight and make sure that there
are no gaps between the
attachment and the desktop
holder.
■
Removing
1
Put your fingertip into the groove
on the one side of the attachment,
lift it up at a slant while pressing
the desktop holder, then remove it
().