User's Guide

29
Before Using the Terminal
❖
Note
･
Do not put a sticker etc. on the proximity sensor.
･
The back cover cannot be removed. Attempting to
remove the back cover with excessive force may
cause damage or malfunction.
･
The battery is built into the terminal and not removal.
The docomo mini UIM card is an IC card
recorded user information such as your
phone number etc.
･
You can use the terminal with docomo mini
UIM card. If you have a UIM or FOMA card,
bring it to a docomo Shop to replace.
･
When docomo mini UIM card is not inserted
to the terminal, making calls, packet
communication, etc. are not available.
･
For details on docomo mini UIM card, refer to
the docomo mini UIM card manual.
･
When inserting/removing the docomo mini
UIM card, make sure to power off the terminal
(P.36).
･
Opening/closing docomo mini UIM card slot
cover (P.23)
■
Security codes of the docomo mini
UIM card
There is a security code called PIN code in
the docomo mini UIM card. The code is set
to "0000" at subscription, which you can
change by yourself (P.162).
❖
Information
･
Please be careful not to touch or scratch the IC when
you handle the docomo mini UIM card. Doing so
may cause malfunction or damage.
1
Open the docomo mini UIM card
slot cover, then hook your
fingertip on the projection part of
the tray ( ) to pull the tray
straight out to remove it from the
terminal.
docomo mini UIM card
Inserting docomo mini UIM
card