User's Guide

144
Settings
Disconnecting a Wi-Fi network
1
From the Home screen,
u
[Settings]
u
[Wi-Fi].
2
Tap the Wi-Fi network that is
currently connected.
3
[Forget].
Adding a Wi-Fi network manually
･
Turn Wi-Fi on beforehand (P.143).
1
From the Home screen,
u
[Settings]
u
[Wi-Fi].
2
u
Enter a network SSID of the
Wi-Fi network you want to add.
3
Tap "Security" setting item
u
Tap a
security type of the Wi-Fi network
you want to add.
･
4 options, "None", "WEP", "WPA/WPA2
PSK", or "802.1x EAP", appear.
4
If required, enter security
information for the Wi-Fi network
you want to add.
5
[Save].
Using optional menu
1
From the Home screen,
u
[Settings]
u
[Wi-Fi]
u
.
Scan P. 1 4 3
WPS Pin Entry P. 1 4 3
Wi-Fi Direct P. 1 4 5
Advanced Network
notification
Set whether to notify
when Wi-Fi open
network is detected.
･
Turn Wi-Fi on
beforehand (P.143).
Keep Wi-Fi on
during sleep
Set to disable the Wi-Fi
function when the
screen backlight turns
off. Also set the terminal
to always turn on the
Wi-Fi function or to
always turn it on when
the terminal is charged.
Avoid poor
connections
Set wether to use LTE/
3G/GSM network mode
when Wi-Fi radio waves
are weak or
communication quality
is bad.
Wi-Fi
optimization
Set wether to control
the battery power
consumption when Wi-
Fi is on.
Auto IP support Enable/disable Auto IP
function.
MAC address Check MAC address.
IP address Check IP address.