User's Guide

106
Apps
1
From the Home screen,
u
[Settings]
u
[More...].
2
[NFC/Osaifu-Keitai settings]
u
[Reader/Writer, P2P]
u
[OK].
･
NFC Reader/Writer, P2P function is
enabled, and appears in the status
bar.
3
Hold the mark over a device
with the NFC module or a smart
poster.
Please note the following when holding the
terminal over an IC card reader or NFC
module equipped device.
･
Bring the mark close to the device slowly,
do not hit it strongly.
･
Hold the mark over the device at the
center horizontally. If scanning fails even with
it held in front of the center of the scanner,
slightly lift up the terminal, or move it
backwards/forwards or to the left/right.
･
If there are metal objects between mark
and the other device, scanning may fail.
Putting the terminal into a case or cover may
affect communication. In that case, remove
the case or cover.
Using "
かざしてリンク対応サービ
ス
(Kazashite-Link compatible
service)"
Notes on holding over the
device