INSTRUCTION MANUAL 14.
Introduction ● "Instruction Manual" (PDF file) Operations and settings of each function are explained. It can be downloaded from NTT DOCOMO website. http://www.nttdocomo.co.jp/english/support/ trouble/manual/download/index.html Thank you for your purchase of "SO-04F". For proper use of the SO-04F, read this manual carefully before and while you use the SO-04F. * You can download the latest information of " ク イックスタートガイド (Quick Start Guide)".
Operation descriptions In this manual, each key (key icon) operation is described with P, k, x, y, r. And selection operations of the icons or function items on the touch screen are described as follows. Description From the Home screen, u[Settings]u [About phone]. Operation From the Home screen, tap (Apps button), and then tap "Settings" on the next screen and "About phone" on the following screen in order. Touch and hold Keep touching an icon longer (1-2 an icon. seconds).
Supplied accessories ･ ･ クイックスタートガイド (Quick Start Guide) (In Japanese only) SO-04F (with warranty) ･ SO-04F のご利用にあたっての注意事項 安全上／取り扱い上のご注意 (Notes on usage Safety/Handling precautions) (In Japanese only) ･ Desktop Holder SO21 (with warranty) ･ 1Seg antenna cable SO01 Optional devices (P.
Contents ■ Supplied accessories. . . . . . . . . . . . . . . . . 2 ■ About using the terminal . . . . . . . . . . . . 5 ■ Safety Precautions (Always follow these Phone . . . . . . . . . . . . . . . . . . . . . . 78 directions) . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ■ Handling precautions. . . . . . . . . . . . . . . 16 ■ Waterproofness/Dustproofness . . . . . 22 Making/Receiving a call.................................................... 78 Operations during a call .........................
Settings . . . . . . . . . . . . . . . . . . . 142 Viewing the setting menu............................................ 142 WIRELESS & NETWORKS ................................................. 142 DEVICE....................................................................................... 151 PERSONAL............................................................................... 158 ACCOUNTS............................................................................. 165 SYSTEM ...........................
Contents/Precautions About using the terminal The terminal supports LTE, W-CDMA, GSM/ GPRS and Wireless LAN Systems. ･ Because a terminal operates using radio frequencies, it cannot be used inside a tunnel, underground, in a building or other locations where radio waves do not reach the terminal, in locations with weak radio wave condition, or out of Xi/FOMA service area.
The terminal automatically performs communication for synchronizing data, checking the latest software version, maintain connection with the server, etc. If you transmit a large amount of data such as downloading applications or watching video, a packet communication charge becomes high. Subscription of packet flat-rate service is highly recommended. ･ Depending on the applications or service you use, packet communication charge may be applied even in Wi-Fi communication.
For services provided by Google, refer to Google Terms of Service. For other web services, refer to each terms of service. ･ Google application and service contents are subject to change without prior notice. ･ The terminal supports only sp-mode, mopera U and Business mopera Internet. Other providers are not supported. ･ To use tethering, subscription of sp-mode is required. ･ Packet communication charge when using tethering varies depending on the charging plan you use.
■ The following symbols indicate specific directions. Indicates prohibited actions. Don’t 1. Handling the terminal, adapter, desktop holder, docomo mini UIM card, 1Seg antenna cable (common) DANGER Indicates not to disassemble. No disassembly No liquids No wet hands Do Unplug ■ Indicates not to use where it could get wet. Don’t Indicates not to handle with wet hands. Indicates compulsory actions in accordance with instructions. Don’t Indicates to remove the power plug from the outlet.
No liquids Do not allow liquid (water, drinking water, urine of pet animals, perspiration, etc.) to come into the charging jack or microUSB jack. Doing so may cause fire, burns, injury or electric shock. Do Use optional devices specified by NTT DOCOMO for the terminal. Failure to do so may cause fire, burns, injury or electric shock. Don’t Do not subject the equipment to excessive force or throw it. Doing so may cause fire, burns, injury or electric shock.
Do Be careful especially when using the terminal connected to the adapter continuously for a long time. If you play a game, watch 1Seg, etc. for a long time while charging, the temperature of the terminal and adapter may rise. If you are directly in contact with hot parts for a long period of time, it may cause your skin to become red, itchy, or develop a rash depending on your physical condition and also it may cause low-temperature burn. WARNING Don’t Don’t 2.
Do Do Do Power off the terminal in a place where the use is prohibited such as in airplane or hospital. Failure to do so may affect electronic equipment and electronic medical equipment. Follow the instructions of each medical facility for the use of mobile phones on their premises. Prohibited acts such as mobile phone usage on board an airplane may be punished by law. If usage of mobile phones in an aircraft is admitted by setting airplane mode, etc., use the terminal under the direction of the airline.
Do If the internal battery leaks or gives off a strange smell, immediately remove it from the vicinity of open flames. The leaking liquid may ignite fire, catch fire, or explode. Don’t Do not swing the terminal around by holding 1Seg antenna cable, strap, etc. The terminal may hit you or others and cause accident such as injury. Do CAUTION Don’t Don’t Don’t Don’t Do Do not use damaged terminal. Doing so may cause fire, burns, injury or electric shock.
3. Handling adapter or desktop holder Don’t When you insert and remove the AC adapter from power outlet, do not contact a metal strap or other metal objects with the jack. Doing so may cause fire, burns or electric shock. Don’t Do not put an excessive force up, down, left or right when the adapter is connected to the terminal. Doing so may cause fire, burns, injury or electric shock. WARNING Don’t Do not use the adapter cord if it gets damaged. Doing so may cause fire, burns or electric shock.
Do Do Do When you connect the AC adapter to the power outlet, insert it firmly. Failure to do so may cause fire, burns or electric shock. When you disconnect the power plug from the outlet or cigarette lighter socket, do not pull the adapter cord with excessive force. Instead, hold the adapter to disconnect. Failure to do so may cause fire, burns or electric shock. Remove or insert the adapter to the terminal evenly without applying excessive force.
Do Do When you get close to other people within 15 cm just like not having enough space to turn around, set the radio wave of the terminal to OFF beforehand (Airplane mode, to turn OFF, etc.). A person in close proximity may put on implanted a medical electrical equipment such as pacemakers and ICDs. The radio waves from the terminal may affect the performance of electronic medical equipment. Follow the instructions of each medical facility for the use of the terminal on their premises. 6.
･ Handling precautions ■ If the jack is soiled, connection gets worse and it may cause power to be turned off or insufficient battery charge, so clean the jack with a dry cotton swab etc. When cleaning, be careful not to damage the terminals. Common precautions ･ SO-04F is waterproof/dustproof, however, do not allow water or dust to seep into the terminal and do not allow accessories or optional devices to get wet or dust. ･ ･ Make sure to use the terminal etc. without excessive force.
･ Do not use the terminal in extremely hot or cold places. ･ Use the terminal where the temperature ranges between 5 ℃ and 35 ℃ and humidity ranges between 45% and 85%. Using the terminal near land-line phone, television or radio may cause interference in these electric appliances. Make sure to move far away from them when using the terminal. ･ Note down the information saved in the terminal in a separate note and keep it safely. Failure to do so may get dust or water inside and cause malfunction.
degradation level of the internal battery. ･ Be careful especially about the following points when preserving the terminal. - The battery is fully charged (immediately after the charging is complete) - The battery has run out (the terminal cannot power on) The performance and life of the internal battery may deteriorate. It is recommended that you store the battery with the remaining battery level of about 40% as a guide.
■ docomo mini UIM card precautions Do not use unnecessary force to insert/ remove the docomo mini UIM card. ･ Note that DOCOMO assumes no responsibility for malfunctions occurring as the result of inserting and using docomo mini UIM card with another IC card reader/writer. ･ Always keep the IC portion clean when you use the card. ･ Clean the terminal with a dry soft cloth (such as used for cleaning eyeglasses).
･ Frequency band ･ The frequency band used by the terminal's Bluetooth/wireless LAN function is written as follows: 2.4 : This radio equipment uses the 2400 MHz band. FH/XX/DS/OF： Modulation scheme is the FH-SS, other system, DS-SS, or OFDM system. 1 : The estimated interference distance is 10 m or less. 4 : The estimated interference distance is 40 m or less. 8 : The estimated interference distance is 80 m or less. : The full band between 2400 MHz and 2483.
･ - If the device causes radio interference to specified low power radio stations or amateur radio stations, contact "General Inquiries" on the last page. Wireless LAN Do not use wireless LAN near magnetic devices such as electrical appliances or AV/OA devices, or in radio waves. - Magnetism or radio waves may increase noises or disable communications (especially when using a microwave oven). - When used near TV, radio, etc., reception interference may occur, or channels on the TV screen may be disturbed.
･ ■ For use in an aircraft, contact the airline beforehand. In some countries, usage may be restricted. Confirm regulations etc. for the country/area you stay before using Note ･ Do not use a remodeled terminal. Using a remodeled terminal violates the Radio Law/Telecommunications Business Act. ･ Use the FeliCa reader/writer function only in Japan. FeliCa reader/writer function of the terminal conforms to Japanese radio standards. If you use this function overseas, you may be punished.
Waterproofness/ Dustproofness SO-04F provides waterproofness property of IPX5*1, IPX8*2 and dustproofness property of IP5X*3 with docomo mini UIM card slot cover, microSD card slot cover and microUSB jack cover firmly attached. *1 IPX5 means that a phone keeps functioning after applying a jet flow of 12.5 L/min. from every direction from a distance of approximately 3 m for at least 3 minutes using water nozzle in 6.3 mm inner diameter.
To ensure waterproofness/ dustproofness To avoid water ingress, be sure to observe the following points. ･ Do not throw any liquid other than room temperature tap water on the terminal, or soak it in such liquid. ･ Firmly close the docomo mini UIM cover, microSD card slot cover and microUSB jack cover. Even a fine obstacle (one hair, one grain of sand, tiny fiber, etc.) put between contact surfaces may allow water to enter.
■ Closing the docomo mini UIM card slot cover, microSD card slot cover and microUSB jack cover Set back the cover in the direction of the arrow and press it in, then ensure there are no gaps. Important precautions Do not perform actions shown in the illustrations below.
Do not put the terminal in hot water, use it in a sauna or apply hot airflow (from a hair dryer etc.) to it. ･ Do not move the terminal in water or slam the terminal against the surface of water. ･ If you put the terminal in tap water, be sure to have it within 30 minutes. ･ When you use the terminal in swimming pool, obey rules of the facility. ･ The terminal does not float on water. ･ Do not leave water on the terminal. In cold region, the terminal freezes up and may cause malfunction.
b Shake the terminal approximately 20 times, firmly holding it, until there is no more water splattering. ･ Dry the terminal naturally for about 3 hours at room temperature. Notes on charging c Swing the terminal in about 10 times against dry, clean cloth etc.
Part names and functions a b c e f g u j n v w o h r d k p l s q t i Proximity sensor : Detect the face to get close during a call and turn on or off the touch screen to prevent misoperation, or help auto brightness control.
❖Note ■ Do not put a sticker etc. on the proximity sensor. The back cover cannot be removed. Attempting to remove the back cover with excessive force may cause damage or malfunction. ･ The battery is built into the terminal and not removal. ･ ･ docomo mini UIM card The docomo mini UIM card is an IC card recorded user information such as your phone number etc. ･ You can use the terminal with docomo mini UIM card. If you have a UIM or FOMA card, bring it to a docomo Shop to replace.
2 Set docomo mini UIM card into the tray with IC facing up ( ), then insert the tray with the card and press it all the way into the terminal. ･ Removing docomo mini UIM card 1 Open the docomo mini UIM card slot cover, then hook your fingertip on the projection part of the tray to pull the tray straight out to remove it from the terminal. 2 Remove the docomo mini UIM card from the tray ( ), then insert the tray into the terminal and press it straight all the way.
CE mark and FCC ID 1 Open the docomo mini UIM card slot cover, and insert a fingernail into the hook at the edge of the label tray, then pull it out straight. Operation time on full charge (estimate) The charging time varies by the internal battery condition or operating environment. ･ "Continuous standby time", "Continuous call time" (P.213) Continuous FOMA/3G stand-by time GSM LTE Continuous call time FOMA/3G GSM Stationary (Auto) : Approx. 500 hours Stationary (Auto) : Approx.
･ To check the charging performance, from the Home screen, tap u[Settings]u[About phone]u[Status]u[Battery life]. Before charging It is recommended to use the AC Adapter 04 (optional) for charging. For details on AC Adapter 04 (optional), see AC Adapter 04 (optional) manual. ･ The AC Adapter 04 (optional) is compatible with AC 100 V to 240 V. For using the terminal overseas, a plug adapter that fits the electrical outlets in the country you stay is needed.
2 Unfold the power plug of the AC Attaching/Removing the adapter and insert it into an outlet. attachment 3 Install the terminal to the Desktop Holder and move it left or right until it clicks. ･ When the terminal and the Desktop Holder are correctly connected, the notification LED of the terminal turns on (P.42). ■ 1 2 4 When charging is complete, holding the desktop holder, lift the terminal up to remove. 5 Remove the power plug of the AC adapter from the power outlet.
❖Note You cannot charge the battery by connecting the desktop holder to a PC. ･ Check the connecting direction to connect correctly. Wrong connection may cause damage. ･ Attachment 35A is attached to the Desktop Holder by default. ･ Attachment 35B only supports terminal covers with " 純正卓上ホルダ対応 (Compatible with genuine desktop holders)" mark and the terminal can be charged on the Desktop Holder with a compatible cover attached.
･ Charging with a PC When using Micro USB Cable 01 (optional) for charging, do the following procedures. ･ Opening/closing microUSB jack cover (P.23) 1 Open the microUSB jack cover and insert the microUSB plug of the microUSB cable horizontally into the microUSB jack of the terminal with the engraved side ( ) facing up. 2 Insert the USB plug of the microUSB cable into a USB port of a PC. When a screen for new hardware detection etc. appears on the PC, select " キャンセル (Cancel)".
Turning power off Turning power on/off Turning power on 1 Press and hold P for over a second. ･ The terminal vibrates and lock screen appears after a while. 1 Press and hold P for over a second. 2 [Power off]u[OK]. ❖Information Press P for over a second uTouch and hold [Power off ] uTap [OK] to restart the terminal in safe mode (P.194). ･ Force stop ･ Opening/closing docomo mini UIM card slot cover (P.23) 1 2 Cancel the screen lock.
Setting sleep mode When the sleep mode is set, the screen backlight turns off so that you can avoid misoperations of the touch screen and keys, and lock the screen. 1 Press P. ･ Press P again to cancel sleep mode. Adding widgets on the lock screen You can add widgets such as calendar, clock, etc. on the lock screen. 1 2 ❖Information Also, when the screen backlight goes off after a specified time elapses, the terminal goes into sleep mode.
- Select whether to install all applications now or later - Set whether to respond when receive a request of location search Initial settings When the language selection screen appears after turning the power on and canceling the screen lock, follow the onscreen instructions to make initial settings. 1 Select [English (United States)]u [Done]u . ･ 2 3 After this step, follow the onscreen instructions to make the following settings, and tap or [Finish].
Basic operations Operations on the touch screen ■ Touch an item such as icon or menu with your finger lightly and release it. ･ Double-tap means tapping twice quickly. Using the touch screen Precautions on using touch screen Touch screen is designed for being touched lightly with fingers. Do not push the touch screen hard with a finger or press sharp objects (nail, ballpoint pen, pin, etc.) against the screen. ･ Touching the touch screen may not work in the following cases.
■ Pinch Touch the screen with two fingers and widen (pinch-out) or narrow (pinch-in) the fingers' distance. On some screens, pinchout to zoom in and pinch-in to zoom out. Basic key icon operation x y r x Back Go back to the previous screen. Or close a dialog box, an option menu, the Notification panel, etc. y Home Go to the Home screen. Touch and hold the icon and drag to to activate " しゃべってコン シェル (Shabette concier)" or "Google" application.
Switching portrait or landscape view automatically You can set the screen orientation to switch between landscape and portrait view automatically according to the terminal orientation. 1 2 Drag the status bar downwards. [Auto rotate]. ･ When the setting is enabled, appears. ❖Information Even when you change the orientation of the terminal, the screen may not change to landscape view depending on the screen such as Home screen, etc.
Capturing screenshot Notification LED You can save the current displayed screen as an image (screenshot). 1 On the screen you want to capture, press and hold P and volume down key for over a second at the same time. ･ Screenshot is captured and in the status bar. appears ❖Information ･ Drag the status bar downwardsuTap [Screenshot captured.] to check captured images in the "Album" application. Also, tap [Share] to attach captured images to an application to send or to share them.
Status bar A status bar appears at the top of the screen. In the status bar, the terminal status and notification are displayed. Notification icons appear on the left side, and status icons appear on the right side of the status bar. Status bar Status icon The main status icons displayed on the status bar are as follows.
Notification icon The main notification icons displayed on the status bar are as follows. New email message New Gmail message New message (SMS) Problem with message (SMS) delivery New Area Mail Screenshot captured New Facebook message Uploading data to Facebook Uploading data to Facebook completed Facebook setting request notification Receiving/downloading data Sending/uploading data Notification of data reception etc.
Connecting to a VPN The terminal set as media server/connection request notification received Error message Warning message Problem with sync Setup guide unchecked Some notifications are hidden Notification from docomo LIVE UX Setting USB tethering Wi-Fi tethering ON Bluetooth tethering is set USB tethering, Wi-Fi tethering, Bluetooth tethering are set Positioning with GPS AUTO-GPS is set Omakase Lock is set Available memory on the terminal is low Notification of data transfer to microSD card exists (availa
Hotspot GPS Glove mode Auto rotate Settings b Enable/disable Wi-Fi tethering function. Enable/disable GPS function. Enable/disable Glove mode. Set whether to switch portrait/ landscape view automatically according to the terminal orientation. Display Settings menu (P.142). Clear ･ Clear contents on the Notification panel. Some notifications may not be cleared. ❖Information Tap x to close the Notification panel. Flick left or right a notification on the Notification panel to delete from the list.
❖Information ･ To change the initial home screen for operations, switch the home screen you want to change to, touch and hold the area of the screen where no icons are displayeduTap . Adding a home screen Adding a home screen Widget is an application which can be added to the Home screen to use. Use a widget to start an application easily. 1 Up to 7 home screens can be displayed. 1 Touch and hold an area of the Home screen where no icons are displayed.
Adding a shortcut to the Home screen You can add shortcuts of application, bookmark, etc. 1 Touch and hold an area of the Home screen where no icons are displayed. ･ 2 3 Alternatively, pinch-in on the Home screen. [Apps]. Select [Shortcuts] or an application you want to add. When you select "Shortcuts", select from the stored shortcuts. ･ When a data selection screen or setting screen appears, follow the onscreen instructions.
3 Any of [Album]/[Live Wallpapers]/ an image. When you tap [Album], select an image uSet range of the image by dragging, etc. to adjust the cropping frameuTap [Crop] to set wallpaper. ･ When you tap [Live Wallpapers], select a contentuTap [Set wallpaper]. ･ ❖Information ･ To return to the Home screen, tap y or x, or tap any home screen. Changing theme You can change themes for the Home screen, wallpaper of the lock screen, etc. 1 Touch and hold an area of the Home screen where no icons are displayed.
Media WALKMAN Album Movies 1Seg FM radio YouTube dmarket ｉチャネル (i-channel) sugotoku contents Camera docomo mail Messaging Dial Apps* Browser Speed dial 1/Speed dial 2/Speed dial 3 P.53 P.128 P.53 P.109 P.115 P.130 P.103 P.56 P.55 P.116 P.91 P.91 P.53 Using speed dials Save frequently used contacts to "Speed dial 1", "Speed dial 2", and "Speed dial 3" to easily make a call or send a message. ■ Save phone numbers and mail addresses to "Contacts" beforehand.
❖Information ･ Others To change/delete/edit contacts saved in the speed dials, select a contact saved in the speed dialu [Menu]uTap any of [Edit entry]/[Delete entry]/[Edit contact]. Using Settings 1 On the Simple Home screen, [Settings]. My profile Display Sound Check your own phone number and mail address, etc. Sleep Select a time duration before the screen back light turns off. Wallpaper Set wallpaper for Simple Home screen. ･ To set "Custom", unmark "Default" and tap [Custom].
Changing applications on the Simple Home screen 1 On the Simple home screen, [Settings]u[Display]u[Customize Home]. 2 3 [Change apps]/[Reorder apps]. Select applications to changeuSelect applications to display/select a location to move to. ･ 4 Xperia™ Application screen Application screen displayed when "Preferred applications" is set to "Xperia™" is explained here. ･ Switching Home application (P.59) From the Home screen, 1 b . c Grayout applications cannot be changed. [OK].
❖Information On the leftmost application screen, flick to the right the screen (except for the left edge) to open the optional menu. ･ While sorting application icons, drag an icon to the right edge of the application screen to add an application screen. ･ Application list Applications displayed on the application screen are as follows. ･ For usage of some applications, separate subscription (Charged) is required.
Email Send and receive emails (multiple accounts are available). → P.94 Calendar Display a calendar and manage schedule. Maps Use Google map services, such as viewing current location, finding another location and calculating routes. → P.135 ナビゲーション (Navigation) The folder contains "Navigation", "Local" applications. docomo mail Send/receive mails using DOCOMO mail address (@docomo.ne.jp). Sent/received mails are saved in cloud.
Gmail Send and receive mails from/to a Google account. → P.98 Play Movies & TV An application for accessing movie rental service of Google Play. Select a movie you want to watch and rent it. Play Books Download new books, bestsellers, etc. from Google Play to read. Messenger Chat with friends using Google+ instant messaging. Hangouts Chat using photos, pictograms, and videos. Play Games Download games, from Google Play and play them.
ｉ チャネル (i-channel) An application which delivers the latest information for 9 categories such as weather, news, show business, sports, fortune-telling, etc. automatically. ｉコンシェル (i-concier) An application for using i-concier. i-concier is a service in which a mobile phone supports your life like a "butler" or "concierge". しゃべってコンシェル (Shabette concier) Speak "what you want to search" or "what you want to do" to the terminal.
❖Information Uninstalling an application Some pre-installed applications can be uninstalled. Even if uninstalled, some applications can be downloaded from "Play Store" (P.103) etc. again. ･ Some applications require downloading and installation. If downloading an application is not available, set to allow to download (P.160). ･ Activating two or more applications may increase battery consumption and the operation time may become short. For this reason, it is recommended to end applications when not used.
Small apps Task manager You can check the recently-used applications and end them. You can activate a small app which can be used while using another application. Opening recently-used application window Display recently used applications in thumbnail list and activate. 1 r. ❖Information Tap a thumbnail of application to activate. Flick left or right a thumbnail of application to delete it from the list.
Adding small apps 1 ru ･ Switching Home application . Small apps list appears. In the terminal, you can switch the Home and hold a small app or 2 Touch shortcut to adduDrag to Favorites. screen between "docomo" or "Xperia™". the Home screen, 1 From ❖Information u[Settings]u[Personalization] ･ Alternatively, select an app/widget in the small app u[Preferred apps setting]. list to activate a small app. ･ In the small app list, tap u[Play Store]/[Widgets] 2 [Set all to]/[Home screen].
Searching information in the terminal and web pages Enter a word in the search box to browse the information in the terminal or on the Internet. 1 From the Home screen, tap the Google search widget. 2 Enter a search word. 3 Tap a search item or software keyboard. ･ ･ Character entry (P.61) You can set to use for search box or set search objectives in the terminal. 1 From the Home screen, tap the Google search widget. 2 In the lower left of the screen, u u[Settings].
Character entry Enter characters using the software keyboard which appears when you tap the character input box in a mail, phonebook, etc. 1 2 3 ❖Information When the software keyboard is displayed, appears on the status bar. ･ To hide software keyboard, tap displayed at the lower left of the screen. ･ Touch and hold a text in the character entry screen to display the enlarged text and check for dragging the text.
Japanese syllabary keyboard Kana handwriting input Kanji handwriting input Keyboard with keys arranged in the order of Japanese syllabary. Trace characters on the Kana handwriting area to enter Hiragana, Alphabet, Number, a part of symbols by handwriting. Input Hiragana, Kanji, Katakana, Alphabet, Number, a part of symbols by tracing characters on Kanji handwriting area without switching input mode.
a c a d g f e QWERTY keyboard h b a f c e d g h b Japanese syllabary keyboard a e b f c g d h Kana handwriting input Display the previous character (reverse order). Appears after conversion is fixed to return to text before conversion. / Appears when entering numbers, tap to switch onebyte/two-byte character. / / Appears in alphanumerics input mode, tap to switch lower case, capitalization and upper case.
b h Move the cursor to the left. c / The character mode switches "Hiragana/Kanji/ Alphabets" → "Number" in order. For QWERTY keyboard, Japanese syllabary keyboard, the character mode switches "Hiragana/Kanji/ Alphabets" → "Number/Symbol" in order. / Touch and hold or flick up Enter symbols or facemarks from the list. Appears before fixing character in Hiragana/Kanji input mode and displays alphanumeric or katakana conversion candidates.
❖Information ･ ･ ･ ･ ･ ･ ･ Displayed icons vary by keyboard. For Kana handwriting input, you can enter the next character on the entered character. Note the following when you use Kana handwriting input. - For voiced sound and semi voiced sound mark, enter in the right upper part of the input screen. - For punctuation mark and lower case, enter in the lower part from the center of the input screen. - For entering alphabet, use the lower horizontal line of the input screen as the base.
Editing text In the character entry screen such as phonebook and note, double-tap character you want to edit so that text edit menu appears at the top of the screen. Drag or to change the character string to select. (Select all) (Cut) (Copy) (Paste) (Complete) Select all entered text. Cut a selected character string. Copy a selected character string. Paste a copied/cut character string. Close the edit menu.
Setting Xperia™ Japanese keyboard 1 2 From the Home screen, u[Settings]u[Language & input]. of "Xperia™ Japanese keyboard". Keyboard Setup On-screen keyboard settings Input support Keyboard skin Manage extensions Change basic settings of Xperia™ Japanese keyboard following the guide. P.68 P.70 Change software keyboard skin. Set whether to use plug-in applications or install plugin application to add. Use preinstalled plug-in application, "Contact Picker 2.3", to enter contact information (P.71).
On-screen keyboard settings Set whether to keep the last status of keyboard (phonepad/ QWERTY/Japanese syllabary keyboard/ Kana handwriting input/Kanji handwriting input) for the portrait/ landscape screen and kana/ alphabet/number input mode respectively. Resize keyboard Explain how to adjust keyboard size and position in the portrait screen. Show numeric Set whether to QWERTY keys KEYBOARD display numeric SETTINGS keypad in Kana/ Alphanumeric input mode. Choose key P.
COMMON ON- Full screen SCREEN mode KEYBOARD SETTINGS No. of lines (portrait) No. of lines (landscape) Set whether to display text display area in the full screen mode in landscape screen. Set number of lines for conversion candidates displayed in portrait screen. Set number of lines for conversion candidates displayed in landscape screen.
Customizing keyboard You can change symbols which are displayed in QWERTY keyboard when entering number to desired characters/symbols. 1 On a character entry screen, touch and hold or flick it up. 2 u[On-screen keyboard settings]u[Keyboard customization]. 3 Tap a symbol you want to changeuDelete character previously set, then enter a character to displayu[OK]. ･ 4 Only one character (two-byte or onebyte character) can be set. [OK].
In Hiragana/Kanji input mode (in inputting character when using Kanji handwriting input), tap [ 直変 (Direct conversion)]/[ 予測 (Prediction)] in the word suggestion field to display direct conversion candidates/predicted conversion candidates. ･ The beginning of sentence may not be capitalized in one-byte alphabet entry mode when "Auto capitalization" is marked. ･ You can use or add extensions when entering characters. If contacts are registered to the Contacts, you can use "Contact Picker 2.
docomo LIVE UX Home screen Managing the Home screen Tapping y displays Home screen which consists of up to 7 screens you can use flicking left and right. a b Move application icons or add widgets or folders to the Home screen. e c f d c g Adding/Moving applications etc. to the Home screen "ひつじのしつじくん® (Butler Sheep)" ©NTT DOCOMO 1 Touch and hold an area of the Home screen where no icons are displayed. 2 Any of [Show apps]/[Show widgets]/[Create folder]/[MachiChara display setting].
Moving an icon on the Home screen 1 2 ❖Information You can disable some applications or widget which cannot be uninstalled by dragging to "Disable app" in Step 2 (P.157). ･ From the Home screen, touch an icon you want to move. Drag it anywhere. ･ To move to another Home screen, keep touching the icon and drag it to left or right. Deleting an icon from the Home screen 1 From the Home screen, touch and hold an icon you want to delete. 2 Drag to "Back to apps list"/ "Remove form Home screen".
Changing wallpaper Adding a home screen 1 Touch and hold an area of the Home screen where no icons are displayed. 1 Touch and hold an area of the Home screen where no icons are displayed. 2 3 [Change wallpaper]. 2 3 [Home screens]. Tap a wallpaper you want to change. ･ 4 Tap [See more wallpapers] to select from "Album", "Live Wallpapers", or "Xperia™ wallpapers". When you select "Album", select an imageuDrag etc. to adjust the cropping frameu[Crop].
Customizing the application screen Application screen 1 From the Home screen, ･ . Flick the Home screen downwards to display the application screen. a d e Moving/Adding an application or widget to the Home screen 1 On the application screen, touch and hold an icon you want to add to the Home screen. 2 Drag it to the Home screen display area at the bottom of the screen. b f c Apps/Widgets/Wallpapers tab ･ Display application icons/widgets/wallpaper list.
Moving application in the application icon list 1 On the application screen, touch and hold an icon to move. 2 Drag it anywhere. Searching for an application Search application installed into the terminal to activate. 1 2 3 On the application screen, u[Search]. Enter application name to search. ･ Search suggestions appear as you enter a character. Setting a location for installing applications Set a location of application installed in the terminal.
❖Information Using My Magazine 1 From the Home screen, ･ ･ Tap [Set/Edit free word category] in Step 2 to add/ edit your favorite words as categories. Enter a wordu[OK]uMark categories you want to adduTap [OK] to set them to My Magazine. ･ My Magazine is a search service for displaying articles for categories you selected. It helps to set search words depending on your tendency of read articles or profile information to come close to your preference.
Phone Making/Receiving a call Making a call u"Dial" 1 From the Home screen, tab. 2 Enter a phone numberu 3 When the call is finished, [End call]. ･ Tap . to delete the number. ❖Information In Step 2, tap without entering a phone number to enter the phone number registered as the latest call in Recent calls. ･ To activate Xperia™ phone application, from the Home screen, tap u[Dial].
❖Information ■ If docomo mini UIM card is not inserted to the terminal, emergency calls (110, 119, 118) cannot be made in Japan. ･ You can make an emergency call by tapping [Emergency call] on the lock screen. In Japan, however, on the PIN code entry screen, while PIN code locked or while PUK locked, emergency calls (110, 119, 118) cannot be made. ･ If you call to emergency numbers with Call Blocking is ON, the setting turns off automatically.
･ 3 When "Auto conversion" in International dial assist is marked (P.189), the international dial assist screen appears when sending. Tap [Call original] or [Call]. When the call is finished, [End call]. ❖Information If the area code begins with "0", omit "0". However, "0" may be required to dial to some countries or areas such as Italy. ･ Receiving a call 1 While receiving a call, drag (left) to (right). 2 When the call is finished, [End call].
❖Information ･ Operations during a call On the Calling screen, you can set speakerphone or mute, or enter a phone number to make a call to another party. ■ Calling screen a b Phonebook : View phonebook entry list screen (P.86). g Option menu h Mute : Turn the microphone on/off during a call. ･ When you switch to the other screen such as the Home screen with Mute on, appears in the status bar. i Dial key : Send push signals or enter the phone number you want to add to make a call.
Adjusting the earpiece volume 1 Press the volume key during a call. Call history Incoming call and outgoing call are displayed by chronological order in the Recent calls screen. Up to 500 items can be displayed. Showing call history From the Home screen, u"Recent calls" tab.
･ 4 To add an item, tap Tap [Add]. of "Others"u [Save]. Deleting a call history 1 From the Home screen, u"Recent calls" tabuTouch and hold a incoming/outgoing history you want to delete. 2 [Delete from call log]u[OK]. ❖Information To delete all call logs, on the Recent calls screen, tap "Incoming" tab/"All" tab/"Outgoing" tabu u [Delete all]u[OK]. ･ Displaying missed calls When you have missed calls, the status bar. 1 2 appears in Drag the status bar downwards. [Missed call].
Network Service Call settings You can set the network services, register call rejection or edit Reject call with message. 1 2 From the Home screen, [Call settings]. Network service u . Record voice messages for you. Record caller's message when you cannot answer an incoming call. Call Transfer call when you forwarding cannot answer an service incoming call. Call Put the current call on Waiting hold and answering an incoming call or making a call to another party.
Advanced call Sub settings address settings Prefix settings Call Blocking Sound & Vibration settings Phone ringtone Vibrate when ringing Dial pad touch tones P.83 Set whether " " in phone number is identified as a sub address separator. Register a prefix number added before phone number when making a call. Set whether to reject incoming calls for numbers not in the phonebook, private, pay phone and unknown. Set ringtone (P.153). Speaker voice Make a voice clear to understand enhancement during a call.
Phonebook ■ Phonebook list screen On the phonebook list screen, you can view details of your contacts. You can add a photo or image to a phonebook entry, and display phonebook entries by group. On the phonebook, you can enter various information for contacts, for example, phone numbers, mail addresses and various service accounts. g a Displaying phonebook 1 ･ d k c The phonebook list screen appears. To use cloud service for the phonebook, "docomo phonebook" application is needed.
Cloud ･ Log in to/out from cloud. i Option menu j My profile tab ･ Check your own phone number. k Index character area ･ Tap index character to display phonebook entries allocated to the index character. l Index ･ Display the index character to search entries in the order of Japanese syllabary, alphabet, etc. m Search h Managing phonebook Adding a new phonebook entry 1 2 From the Home screen, u [docomo phonebook]u"Contacts" tabu[Register]. On the Profile screen, enter necessary information such as name.
Setting phonebook entries to Groups ❖Information 1 2 From the Home screen, u [docomo phonebook]u"Contacts" tabu[Groups]. Touch and hold a phonebook entry to set a groupuDrag it to any group. ･ Newly added group can be edited/deleted. To edit/ delete a group, touch and hold a groupuTap [Edit group]/[Delete group]. Editing a phonebook entry 1 From the Home screen, u [docomo phonebook]u"Contacts" tabuSelect a phonebook entry to edit. 2 3 On the Profile screen, [Edit]. Select a required item and edit.
Registering a phonebook entry to Favorites 1 From the Home screen, u [docomo phonebook]u"Contacts" tabuSelect a phonebook entry to add to Favorites. 2 On the Profile screen, tap . ❖Information Phonebook entries saved to the docomo account/ Google account can be added to Favorites. ･ To display phonebook entries added to Favorites, on the phonebook list screen, tap [Groups]u[Favorites].
Checking My profile and editing information 1 2 3 From the Home screen, u [docomo phonebook]u"My profile" tabu[Edit]. On the My profile screen, enter necessary information such as name. [Save]. ❖Information ･ Name card data created with name card creator application can be saved to My profile and be exchanged via network. When you use for the first time, in the phonebook list screen, tap the "My profile" tabuTap [Create new] and follow the onscreen instructions.
Mail/Web browser docomo mail Message (SMS) Send/receive mails using DOCOMO mail address (@docomo.ne.jp). Sent/received mails are saved in cloud. You can view the same mail on the multiple devices or transfer mail data easily when changing model. Pictograms and Deco-mail can be used, and automatic reception also is supported. For details of docomo mail, refer to NTT DOCOMO website. 1 From the Home screen, ･ . After this step, follow the onscreen instructions.
❖Information ❖Information You can also send/receive text messages to/from customers of overseas network operators. For details, see "Mobile Phone User's Guide [International Services]" or the DOCOMO International Services website. ･ To send SMS to users of overseas network operators, enter "+", "Country code" and then "the recipient mobile phone number". Enter the phone number without a leading "0", if any. Alternatively, enter "010", "Country code" then "the recipient mobile phone number" in order.
Deleting a message (SMS) 1 2 From the Home screen, u[Messaging]. Tap a sender/recipient whose messages (SMS) to delete. 3 Touch and hold a message (SMS) to delete. 4 [Delete message]u[Delete]. ❖Information To delete several messages (SMS), in Step 3, u[Delete messages]uMark messages (SMS) you want to deleteu u[Delete]. ･ Deleting messages (SMS) by sender/recipient 1 2 3 From the Home screen, u[Messaging]. Touch and hold a sender/recipient you want to delete. u[Delete].
･ Email You can create a POP3 or IMAP compatible email account provided by general ISP (provider), or an Exchange ActiveSync account to send or receive email. You can set multiple Email accounts. Making initial setting for Email Set an Email account following the onscreen instructions. 1 From the Home screen, u[Email]. ･ 2 5 If a screen for selecting type of account appears, tap an email account type and follow the onscreen instructions to set.
Creating and sending email 1 2 3 From the Home screen, u[Email]. (Compose). Enter the email address of recipient. Tap to select from the registered contacts. Enter in the search box at the top of the screen to display the contact list. ･ To enter multiple email addresses directly, separate with a comma (,) and then enter the next email address. ･ To add Cc or Bcc recipients, tap u[Show Cc/Bcc]. ･ 4 5 Enter a subject and message. [Send].
Changing Inbox view 1 2 3 From the Home screen, u[Email]. Tap u[Settings]u[General]u [Preview pane]. [Landscape]. Replying/Forwarding email 1 2 From the Home screen, u[Email]. Tap an email to reply or (Reply)/ forwarduAny of (Reply all)/ (Forward). ･ ❖Information When you tap , enter an email address to forward to. If you have two or more accounts, change made in any of the accounts applies to all accounts. ･ To switch to the landscape view, turn Auto rotate screen on beforehand (P.41).
Changing Email account settings 1 2 3 From the Home screen, u[Email]. u[Settings]. Tap an Email account you want to change the settings for. Account name Your name Signature Quick reply Default account Change account name. Change your name (sender name). Change your signature. Register phrase that can be inserted when creating an email. Set whether the account is the default account for creating emails. Set whether to check new messages automatically and intervals of automatic check.
Delete account Delete Email account. *1 Appears when Gmail account (@gmail.com) is set. *2 While the silent mode (mute) is set, the terminal does not vibrate when receiving an email. ❖Information The items vary depending on the account type. If you set "Inbox check frequency" to an item other than "Manual", and if you are using the pay-as-you-go data communication, you may be charged every time you check email. ･ If you tap [General] in Step 3, you can change whole "Email" app settings.
Early Warning "Area Mail" It is a service with which you can receive earthquake early warning, etc. delivered by the Meteorological Agency. ･ Area Mail is a free service for which subscription is not required. ･ Area Mail cannot be received in the following case.
❖Information If savable amount of Area Mail exceeds the limit of maximum, the oldest one is deleted in order. ･ Other settings Deleting Area Mail 1 2 3 From the Home screen, u[Disaster kit]. [Early Warning "Area Mail"]. Mark Area Mail you want to deleteu[Delete]u[OK]. Setting Early Warning "Area Mail" 1 2 3 From the Home screen, u[Disaster kit]. [Early Warning "Area Mail"]. u[Settings]. Receive setting Beep tone Browser Use "Browser" application to view web pages like on a PC.
4 Select a candidate or [ 実行 (Go)] on the software keyboard. To zoom-in/-out web pages, pinch-out/ -in or double-tap the screen. ･ To go back to the previous page, tap x. ･ ･ ❖Information ･ To copy text on web page, touch and hold a text you want to copyuDrag or to select a range of text to copyuTap (Copy). Adding a new tab Open multiple tabs and view web pages. 1 Web pages you view in the incognito tab does not appear in the history. When the tab is closed, the record of Cookies etc. is erased.
Changing the Browser settings Opening a bookmark Set homepage, privacy and security, etc. 1 From the Home screen, u u[Settings]. Select an item to change. 2 1 2 Operating links Touch and hold a link or image in web page to copy URL or save the image. ❖Information In some website, downloading of files etc. may not be available. ･ Managing bookmarks and history You can check history, save bookmarks, etc. Bookmarking a web page 1 2 3 From the Home screen, uDisplay a web page. u[Save to bookmarks].
Apps dmenu In dmenu, you can easily access sites recommended by DOCOMO or convenient applications. 1 From the Home screen, [dmenu]. ･ Browser is activated, "dmenu" appears. ❖Information To use dmenu, Internet connection by packet communication (LTE/3G/GPRS) or Wi-Fi is required. ･ For connecting dmenu and downloading applications introduced in dmenu, packet communication charge is applied separately. Some applications automatically perform packet communications.
NTT DOCOMO is not liable for malfunctions, if any, caused by the application you installed. In such case, the repair is charged even during the warranty period. ･ NTT DOCOMO is not liable for any disadvantage brought to you or any third party due to an application you installed. ･ Some applications automatically perform packet communications. Packet communication is kept active unless you disconnect it or the time-out error occurs.
The data in the IC card*1 or the docomo mini UIM card*2 may be lost or altered because of the malfunction of the terminal (when we repair your terminal etc., as we cannot repair it with data remained, you are required to erase the data yourself ). For support such as reissuance, restoration, temporary preservation or transfer of data, contact Osaifu-Keitai compatible service providers. For important data, be sure to use a service with backup service.
Using " かざしてリンク対応サービ ス (Kazashite-Link compatible service)" 1 2 From the Home screen, u[Settings]u[More...]. [NFC/Osaifu-Keitai settings]u [Reader/Writer, P2P]u[OK]. ･ 3 Notes on holding over the device Please note the following when holding the terminal over an IC card reader or NFC module equipped device. NFC Reader/Writer, P2P function is enabled, and appears in the status bar. Hold the mark over a device with the NFC module or a smart poster.
Locking Osaifu-Keitai function Use "NFC/Osaifu-Keitai lock" settings to restrict the use of Osaifu-Keitai function and related services. ･ NFC/Osaifu-Keitai lock is different from screen lock for the terminal, SIM card lock. 1 2 3 From the Home screen, u[Settings]u[More...]. [NFC/Osaifu-Keitai settings]u [NFC/Osaifu-Keitai lock]. Enter a passwordu[Next]. When using "NFC/Osaifu-Keitai lock" for the first time, enter a password to set.
ToruCa iD アプリ (iD application) "iD" is a convenient electronic money by credit clearance scheme. You can enjoy shopping simply and conveniently only by holding Osaifu-Keitai with credit information set or the iD-compatible card over the IC card reader in stores. Because up to 2 types of credit information can be registered in Osaifu-Keitai, you can use them according to the benefits, etc.
Depending on email application, ToruCa received via the emails may not be saved. ･ Depending on browser, ToruCa cannot be obtained. ･ When ToruCa is moved/copied to the microSD card, it is moved/copied in the condition before obtaining ToruCa (details). ･ You may not be able to obtain ToruCa with an IC card reader, if you do not make initial setting for OsaifuKeitai.
Airwaves 1Seg antenna cable 1Seg is a broadcast service and a different type of radio waves (airwaves) from that of FOMA service is received. Therefore, regardless of whether you are in or out of Xi service or FOMA service area, it cannot be received where airwaves do not reach or during broadcasting interruptions.
1 From the Home screen, u[1Seg]. ･ For the first activation, make channel settings according to the onscreen instructions (P.113). [TV]. ■ 1Seg watching screen 2 ❖Information e a Reception signal level Option menu Record icon Channel selection key ･ Touch and hold / to search available channels. h Data broadcasting ･ Appeared only in portrait screen. i Data broadcasting remote control ･ Appeared only in portrait screen.
To watch data broadcasting, call charge or packet communication charge is not required. If you use additional services of data broadcasting, etc. via packet communication, packet communication charge is applied. ･ Exiting 1Seg 1 On the 1Seg watching screen, xux. ❖Information You cannot exit 1Seg even if you tap y to return to the Home screen. If 1Seg remains activated, the battery may be consumed quickly. ･ Setting 1Seg You can set 1Seg watching screen, data broadcasting and channel settings.
Saving channels in the current location Available channels vary depending on the area (broadcasting service area) you are using in. 1 2 3 From the Home screen, u[1Seg]. [TV]u . [Change area]uTouch and hold unregistered item. 4 [Area info setting]uSelect region, prefecture and locality. 5 [OK]. ❖Information ･ By touching and holding the area registered in Step 3, you can display details, set area information, refresh channels, rename area, and deleting settings.
Using TV link For some data broadcasting programs, link information to related websites (TV link) is displayed. Save TV links to connect to related websites later. ･ Method of registering TV link varies by programs. 1 2 3 From the Home screen, u[1Seg]. [TV Link]. Select a TV link. ･ When selecting a link content or HTML content, tap [Yes]. ❖Information Some TV links have period of validity. Out of date TV links are no longer available. ･ To delete TV link, touch and hold a TV linkuTap [Delete]u[YES].
Reservation of recording/ watching 1Seg program Reserve recording/viewing TV program. 1 From the Home screen, u[1Seg]. 2 3 4 [Reserve Recording/Viewing]u . [New reservation]. [Viewing reservation]/[Recording reservation]. 5 Set a program name, broadcasting station, start time, end time, etc.u[Save]u[YES]. ❖Information Alternatively, tap [From Program guide] in Step 4, you can reserve recording/watching. ･ Using program guide 1 2 From the Home screen, u[1Seg]. [Program guide].
■ FM radio screen Camera efg a Take still pictures and record video clips. Shooting still pictures is available in the portrait and landscape screen. Landscape screen is good for shooting videos. For shooting with Sweep Panorama, always hold the camera horizontally.
About the Copyright and Portrait rights Movies, still images, and sounds recorded on the terminal are prohibited by the copyright law from use without consent of the copyright holders, unless intended for personal use or any other purpose permitted by law. Also, using or transformation of other person's portrait or name without his or her permission may violate the portrait right. When you post recorded images etc. on the Internet web pages etc., make sure to be aware of the copyright and portrait right.
Zooming indicator ･ Within the light gray indicator area (left half ), you can shoot keeping the clearness with less degradation of images (Intelligent clear zoom). In the later of the area (right half ), it functions as digital zooming. e Auto focus frame f Display area for status icons ･ Icons of set items such as Self-timer, Geotagging, etc. are displayed. g Thumbnail ･ Tap a thumbnail to open viewing/playback screen for still pictures/videos taken (P.129).
Manual Change settings for shooting still pictures or videos manually. Info-eye™ When a still picture is shot, information of the object is acquired. Social live by Bambuser Share experience with friends on Facebook in real-time. Timeshift burst Select the best shot from continuous shot images before and after pressing the shutter. 61 still pictures in total are shot continuously for a second before and after pressing the shutter and all the still pictures are saved.
If shooting angle does not reach the required value for Sweep Panorama within a certain period of time, the part which was not taken is recorded in gray. To avoid this, move the camera faster when shooting. ･ Because two or more images are joined together, joints may not recorded smoothly. ･ Images may be blurred or may not be taken in a dark scene.
■ 1 2 Shooting with the camera key Press and hold k for over a second. Press k. ･ To shoot still pictures using auto-focus function, press k halfway and when the auto focus frame turns blue and you hear a beep, press k all the way until it stops. Recording videos ■ 1 2 Shooting with the start/stop icon Press and hold k for over a second. Tap ･ / to start/stop shooting. When the shooting mode is set to"Manual", tap to display the video shooting screen, then tap .
1 Press and hold k for over a second. 2 Tap the capturing mode . iconu[Manual]u Press k to start/stop shooting. 3 Change the setting. ■ Resolution (only for still picture) 3 Set the resolution for photo. An image with a higher resolution requires more memory. ･ When "20.7MP" is set, "HDR" and "Scene selection" cannot be set. ･ When the capturing mode is set to"Superior auto", shoot in "8MP" (16:9), or when it is set to "Timeshift burst", "AR effect" or "Picture effect", shoot in "2MP" (16:9).
■ Focus mode Set focus controls. Single autofocus The camera automatically focuses on the center of the shooting screen. Multi autofocus (only for still picture) The camera automatically focuses on several points on the shooting screen. For places which are focused on by tapping the shutter icon or shooting screen, or pressing k, the auto focus frame turns from white to blue. Face detection Detect several faces to focus (P.127).
■ Soft skin effect (only for shooting with front camera) ■ Set whether to tag still pictures/videos location information (geotag) for the shooting spot. ･ When enabled, location information is added when appears on the shooting screen. ･ appears while acquiring location information. To pictures shot while acquiring location information, geotags are not added. Set whether to shoot a picture making human skin look smoother.
Changing settings from the icon on the screen Tap the icon displayed on the shooting screen to change the setting. ･ The displayed icons vary depending on the capturing mode. ■ Flash Set the flash to light or not when lighting conditions are poor or in backlight. Auto Turn on the flash automatically according to the brightness. Fill flash Always turn on the flash regardless of the brightness. Red-eye reduction Reduce red-eye effect caused by the flash. Off The flash does not turn on.
Hand-held twilight Shoot a crisp and clear night scene reducing noise. High sensitivity Shoot brightly without flash even when shooting under poor lighting condition. Gourmet Shoot clear images making food look delicious. Pet Suitable for shooting pets. Beach Reconstruct beach scene brightly and vividly. Snow Reconstruct snow scene brightly and vividly. Party Shoot an indoor picture creating good atmosphere of indoor lighting. Due to long exposure time, be careful not to shake camera.
Using Quick launch Activate camera to shoot while using other application, or from the lock screen, the Home screen, etc. 1 Press and hold k for over a second. ･ 2 3 "Launch only" to activate the camera is set by default. " tabu[Quick launch] Any of [Launch only]/[Launch and capture]/[Launch and record video]. Shooting with Face detection Focus on a face located away from the center. 1 Press and hold k for over a second. 2 Tap the capturing mode iconu[Manual].
Shooting with Smile Shutter Shoot smile face. 1 2 3 4 5 Press and hold k for over a second. u" " tab/" " tabu[Smile Shutter]/[Smile Shutter (video)]. Select smile level for the smile shutterux. Point the camera at the object. View/play photos or videos. Displaying photos/videos 1 ■ Detected faces are framed (up to 5 faces). ･ The camera selects which face to focus on. Face frame for focusing on turns to yellow (still picture)/blue (video).
❖Information ■ Photo viewing screen ･ Depending on the number of saved images, it may take some times to load images. ･ To zoom in/out images, pinch out/in on the image list screen. ･ Video playback screen (P.132) c de Viewing a photo/video 1 From the Home screen, [Album]uTap a photo/video. For Burst with longpress files, tap a photo. ･ For Timeshift burst files, tap the screenuTap to check all saved photos. ･ For videos, tap .
Operating image files 1 From the Home screen, [Album]uTap a photo/video. 2 Tap a screen. Upload to online service, send via Bluetooth or mail, copy/move to microSD card. Play in slideshow, edit, register or check the detail information. When "Throw" is selected, files can be shared between DLNA device, Bluetooth device or screen mirroring compatible device and the terminal. YouTube YouTube is a free online video streaming service. You can play, search for and upload videos.
Media Player ■ Music playback screen c a Play back music and videos stored on the internal storage or a microSD card using Media Player. ･ File formats of playable data (P.213) e f ❖Information g h For details on Media Player, from the Home screen, u[Media Player]u uTap [Help] to refer to the manual of Media Player. ･ Playing music/video 1 From the Home screen, u[Media Player]. ･ When you activate for the first time, a screen for introducing Media Player appears.
❖Information ･ g You can return to the Home screen to perform another operation while listening to music in the background. To return to the music playback screen, from the Home screen, tap u[Media Player], or drag the status bar downwardsuTap the name of song that is being played. ■ ❖Information ･ While in landscape view, tap the screen to display option menu icons etc.
Location services Your current location can be positioned using GPS, Wi-Fi, or mobile network. GPS function The terminal has a GPS receiver that uses satellite signals to calculate your location. Some GPS features use the Internet. Data rates and charges may apply. When you use GPS function to find your location, make sure you have a clear view of the sky. If GPS does not find your location after several minutes, move to another location.
■ Where radio waves are difficult to receive Note that radio waves may not be received or it may be difficult to receive radio waves in the following conditions, since GPS uses radio waves from a satellite.
Using Google Maps The Google Maps application allows you to view your current location, find other locations and search routes. ･ To use Google Maps, enable data traffic (LTE/ 3G/GPRS) or connect to Wi-Fi. ･ Google Maps does not cover the whole world. ･ Only using LTE/3G/Wi-Fi connection may not detect some locations. 1 ･ 2 Finding the current location on the map You can detect your current location using location information service.
Searching for a location 1 2 3 4 From the Home screen, u[Maps]. Fill out the search bar. on the software keyboard. Tap a destination. Schedule Displaying schedule 1 From the Home screen, [Schedule]. ･ ジュール＆メモアプリ」ソフトウェア使 用許諾規約 ("Schedule & Memo Displaying information Display information such as traffic information etc. on the map. 1 2 From the Home screen, u[Maps]. uSelect information to display. For the first activation, on the 「スケ application" license agreement) screen, tap [ 同意する (Agree)].
Displaying events of Schedule 1 From the Home screen, [Schedule]uDisplay scheduled date/time. ･ 2 To edit an event, tap [Edit]. ❖Information To delete an event, touch and hold an event in Step 2uTap [Delete one]u[Delete]. ･ To delete all events, from the Home screen, tap [Schedule]u u[Delete all]u[Delete]. ･ Setting display conditions in Schedule When a search criteria is set, specified data can be displayed. 1 2 3 From the Home screen, [Schedule]. [Conditions].
Stopping alarm 1 While alarm is sounding, drag to the right. ❖Information If you tap [Snooze], the alarm sounds again when the set time has passed. ･ Using World clock Using Stopwatch 1 2 3 Using Timer Display the date and time etc. in cities around the world. 1 From the Home screen, u[Alarm & clock]u" " tab. uSelect a city. 2 3 1 2 ❖Information Time display during day-light saving time may differ from time difference displayed on the screen when adding a city in Step 2.
Backing up/Restoring to/from Data Storage BOX docomo backup With docomo backup, you can back up or restore data to/from " データ保管 BOX（ドコモ クラウド）(Data Storage BOX (docomo cloud))" or "microSD card". ･ Do not remove microSD card during backup or restoring. Doing so may damage the terminal data. ･ If the battery is low, backup or restore may not be done. In that case, charge the terminal and retry to back up or restore. ･ docomo apps password is required to back up or restore (P.158).
Restoring 1 From the Home screen, u[docomo backup]u[Backup/ restore to docomo cloud]. 2 3 [Restore]. Tap [Select] on data type to restoreuMark data to restoreu[Select]. ･ 4 5 Tap [Select latest data] to select the latest data for each data type. [Overwrite]/[Add]u[Start restore]u[Restore]. Enter docomo apps passwordu[OK]. ❖Information When restoring from the Data Storage BOX, data is restored to the location where the data is backed up to. When model change etc.
Restoring 1 From the Home screen, u[docomo backup]u[Backup/ restore to microSD card]. 2 3 [Restore]. Tap [Select] on data type to restoreuMark data to restoreu[Select]. ･ 4 5 Tap [Select latest data] to select the latest data for each data type. [Overwrite]/[Add]u[Start restore]u[Start restore]. Enter docomo apps passwordu[OK]. Copying phonebook entries registered in Google account to docomo account You can copy contacts data registered in Google account to docomo account.
Settings Wi-Fi Viewing the setting menu 1 From the Home screen, u[Settings]. WIRELESS & NETWORKS DEVICE PERSONAL ACCOUNTS SYSTEM P.142 P.151 P.158 P.165 P.166 WIRELESS & NETWORKS Wi-Fi Bluetooth Data usage Xperia™ Connectivity More... Airplane mode Mobile networks Tethering & portable hotspot VPN NFC / Osaifu-Keitai settings P.142 P.172 P.145 P.146 P.147 P.147, P.185 P.148 P.150 P.104, P.
■ Reception interference caused by Bluetooth devices Bluetooth devices and wireless LAN (IEEE802.11b/g/n) devices use the same frequency band (2.4GHz). If you use Bluetooth devices near a wireless LAN device, reception interference may occur or the communications speed may lower. Also, you may hear noise or have a connection problem. Communication may be interrupted or sound may be lost while streaming data, etc.
Disconnecting a Wi-Fi network 1 2 3 From the Home screen, u[Settings]u[Wi-Fi]. Tap the Wi-Fi network that is currently connected. [Forget]. Adding a Wi-Fi network manually ･ Turn Wi-Fi on beforehand (P.143). 1 2 3 From the Home screen, u[Settings]u[Wi-Fi]. uEnter a network SSID of the Wi-Fi network you want to add. Tap "Security" setting itemuTap a security type of the Wi-Fi network you want to add. ･ 4 5 4 options, "None", "WEP", "WPA/WPA2 PSK", or "802.1x EAP", appear.
Using Wi-Fi Direct compatible device You can connect among the devices compatible with Wi-Fi Direct via Wi-Fi even without configuring access point. ･ Turn Wi-Fi on beforehand (P.143). 1 2 3 From the Home screen, u[Settings]u[Wi-Fi]. u[Wi-Fi Direct]. Select a Wi-Fi Direct compatible device name to connect. Tap [Search for devices] to refresh the detection list. ･ To change the terminal name displayed on the detected Wi-Fi Direct compatible device, tap [Rename device].
Setting Data usage cycle 1 2 From the Home screen, u[Settings]u[Data usage]. Tap "Data usage cycle" setting itemuSet period/[Change cycle...]. ･ When you tap [Change cycle...], select reset dateu[Set]. Using optional menu 1 From the Home screen, u[Settings]u[Data usage]u Data roaming Restrict background data Auto-sync data* Show Wi-Fi usage Mobile hotspots * You need to set your online service account (Google account, Facebook account, etc.) in the terminal to synchronize in advance.
* Compatible with Wi-Fi CERTIFIED Miracast™ Depending on usage environment, image or sound may be interrupted or stopped. Covering around the Wi-Fi/Bluetooth antenna with your hand may affect the quality of communications. Airplane mode In this mode, the functions of using radio wave transmissions such as calling, accessing to the Internet (including sending/receiving mails), etc. are disabled. 1 2 When Airplane mode is on, on the status bar. From the Home screen, u[Settings]u[More...
5 6 Tap and enter all other information required by your network operator. u[Save]. ❖Information Do not change the MCC/MNC. If you change MCC/ MNC to other than the default value (440/10), the set new APN does not appear on the APNs screen. When the set new APN does not appear on the APNs screen, uMake APN settings with "Reset to default" or "New APN" again. ･ Note that, when using the prediction conversion by one-byte alphabet entry mode (English mode) with mark in "Auto space" (P.
Setting USB tethering 1 2 From the Home screen, u[Settings]u[More...]u [Tethering & portable hotspot]. Connect the terminal to the PC with a USB compatible PC with Micro USB Cable 01 (optional) etc. (P.35). 1 When you connect Micro USB Cable 01 (optional) etc. for the first time, the driver software for the terminal is installed to a PC. Wait for a while until installation is completed. ･ When "Install software" screen appears on the terminal, tap [Skip]. ･ ･ 3 4 [USB tethering].
4 Tap "Security" setting itemuTap a security type of the Wi-Fi access point you want to set. 5 Enter security information of the Wi-Fi access point to set as required. 6 [Save]. ❖Information ･ By default, the password is set at random. You can change the password as desired. Setting Bluetooth tethering Up to 5 Bluetooth devices can be connected to the Internet. 1 2 3 From the Home screen, u[Settings]u[More...]u [Tethering & portable hotspot]. [Bluetooth tethering]. Confirm "Details"u[OK].
❖Information ･ To edit/delete VPNs, touch and hold a VPNu[Edit profile]/[Delete profile]. Connecting to a VPN 1 2 3 From the Home screen, u[Settings]u[More...]u[VPN]. Tap a VPN to connect to. Enter required authentication informationu[Connect]. ･ When you are connected to a VPN, appears in the status bar. Disconnecting a VPN 1 2 Drag the status bar downwards. Tap a notification that indicates VPN connected. 3 [Disconnect]. P.151 P.84, P.188 P.152 P.153 P.155 P.156 P.
Dial pad touch tones Sound Sound effects ClearAudio+ Sound enhancements Dynamic normalizer Volumes Phone ringtone Increasing ringtone* Vibrate when ringing Notification sound The sound setting for music recommended by Sonny. It helps optimize the settings for digital signal processing technology with a one-touch operation. Set sound effects. Set to play at a comparable volume when songs with different volume levels are played at random. P.153 P.
Adjusting each sound volume Adjust volumes for playing media, ringtone, notification sounds and alarms. 1 From the Home screen, u[Settings]u[Sound]u [Volumes]. 2 3 Drag the slider to the right or left. [OK]. ❖Information Even if alarm volume is set in Volumes, set in "Alarm & clock" app is given priority (P.137). ･ Press Volume key when the Home screen is displayed to adjust the volume for ringtone. Press Volume key while receiving a call to mute the ringtone.
* Image quality improving procedure for still pictures is effective only for viewing in "Album" application. Adjusting the screen brightness 1 From the Home screen, u[Settings]u[Display]u [Brightness]. 2 3 Drag the slider to the right or left. [OK]. Adjusting the white balance 1 From the Home screen, u[Settings]u[Display]u[White balance]. 2 Tap or drag the slider to the right or left on the position to set.
Storage Check or format memory volume of device memory (internal storage), microSD card, and USB storage. Check available memory space of internal storage, etc. Total space Check available memory space etc. of microSD card. Unmount SD Cancel card*1 connection of microSD card to remove it safely. Mount SD Have microSD card*1 card recognized. Erase SD Format microSD card*1 card. Total space Check available memory space of USB storage. Unmount Cancel USB storage*1 connection of USB storage to remove it safely.
Power management Restrict functions in sleep mode for specified applications to reduce battery consumption. Low battery mode Set time before going into sleep mode, screen brightness, and whether to turn off functions when the battery level becomes lower than set level. Location-based When entering to the registered Wi-Fi Wi-Fi network area, the terminal connects the Wi-Fi network automatically to reduce the battery power consumption. Status bar Display remaining battery level information in percentage.
Deleting application data or application ･ Before deleting application data, back up contents that you want to save including data saved in the application. 1 2 From the Home screen, u[Settings]u[Apps]. Tap an application to delete. To delete application data, tap [Clear data]uRead the note and tap [OK]. ･ To delete application, tap [Uninstall]u[OK]. ･ ❖Information Some applications pre-installed cannot be deleted (uninstalled).
Data usage check PERSONAL docomo service/cloud Location services Security Language & input Backup & reset Setup guide P.158 P.159 P.159 P.163 P.164 P.38 docomo service/cloud Set docomo ID for using docomo ID 設定 (docomo ID setting) docomo applications. docomo cloud Make settings for docomo cloud compatible service. Application Manage to install applications manager provided by NTT DOCOMO and set to check updates for applications regularly.
Location services Access to my location Let Google apps access your location GPS satellites P.134 Set wether to allow Google application to access the location information. Set whether to permit applications to identify your current location using GPS. Google's location Set whether to permit Google to service use location information using result etc. of Google search. Security Screen lock P.162 Improve face Improve face unlock accuracy.
Unknown sources Set wether to permit installing before downloading unknown sources application. Some applications may be of unknown origin. To protect the terminal and personal data, only download applications from trusted sources. Verify apps Set whether to prohibit installation of possibly harmful applications or to warn before installation. Trusted Display trusted CA credentials. credentials Install from Install encrypted certificates.
･ ■ The PUK code is written on the subscription form (copy for customer) handed at the subscription in the docomo Shop. If you subscribed other than docomo Shop, you must bring your official identification (such as drivers license), the docomo mini UIM card with you to the nearest docomo Shop or contact the "General Inquiries" on the last page. ■ You can set security code which named PIN code to docomo mini UIM card. It is set "0000" at the subscription. They can be changed by yourself.
Enabling SIM card lock Unlocking PIN lock By entering PIN code when powered on, you can protect from improper use. 1 2 3 1 From the Home screen, u[Settings]u[Security]u[Set up SIM card lock]u[Lock SIM card]. 2 Enter PIN codeu[OK]. Entering the PIN code when powered on 1 2 On the PIN code entry screen, enter the PIN code. ･ You can change only when you activate the SIM card lock. 1 2 3 4 From the Home screen, u[Settings]u[Security]u[Set up SIM card lock]u[Change SIM PIN].
･ To cancel screen lock pattern after you set, from the Home screen, u[Settings]u [Security]u[Screen lock]uEnter the current unlock pattern/PIN/passwordu[None]. If you forget how to unlock ■ If you set "Pattern" "You have incorrectly drawn your unlock pattern 5 times. Try again in 30 seconds. " appears when you enter incorrect unlock pattern 5 times consecutively.
Setting Voice Search Language Speech output Block offensive words Download offline speech recognition Bluetooth headset Select language used for Google voice search. Set voice output. Set whether to display recognized offensive voice results. Download voice recognition data for offline use. Set whether to record voice sound with Bluetooth headset. * If the phone language is set to "English (United States)", "Hotword detection" appears in the list.
ACCOUNTS Setting an account Manage (add or delete) online service accounts or synchronize contacts, calendar, etc. saved in online services with the terminal. ･ Auto-sync data (P.146) Setting Google account You can set a Google account on your terminal and use Google services such as Gmail, Google Play, etc. You can set multiple Google accounts on the terminal. 1 From the Home screen, u [Settings]u[Add account]u [Google]. 2 Follow the registration wizard, set a Google account.
Accessibility SYSTEM Date & time Accessibility About phone P.166 P.166 P.167 Date & time ･ To set date/time or time zone manually, unmark "Automatic date & time" or "Automatic time zone" to disable networkprovided time/time zone in advance. Adjust date and time automatically by using network-provided information. Automatic time zone Adjust time zone automatically by using network-provided information. Set date Set date manually. Set time Set time manually. Select time zone Set time zone manually.
❖Information ･ When TalkBack is turned on for the first time, a message asking if touch exploration function feature is enabled appears. Touch exploration is a function that reads or displays an explanation for the item you tapped. When touch exploration feature is enabled, you can operate the terminal in the different way from the usual one. To select an item, tap it once and then double-tap it. To drag, tap it once and then doubletap it, then trace the screen to desired orientation.
File management Storage structure Phone (internal storage) Folders in the internal storage by default are as follows. ･ Displayed folders may differ depending on the terminal operations. Android Download recovery Ringtones Stores setting data for system or each application, temporary files, etc. Stores downloaded data through Browser. Stores update package for software update. Stores ringtones etc.
･ The terminal supports microSD cards of up to Class 10 and UHS speed class 1. Note that the speed class indicates performance of microSD cards and all the functions may not be performed at the speed class rate. 2 Close microSD card slot cover and press part firmly to check that no gap exists between the terminal and the cover. Inserting microSD card ･ Opening/closing microSD card slot cover (P.
Removing microSD card Make sure to unmount microSD card (make reading/writing unavailable) before removing. ･ Opening/closing microSD card slot cover (P.23) 1 From the Home screen, u[Settings]u[Storage]u [Unmount SD card]u[OK]. ･ 2 Open microSD slot cover and push microSD card to the end until it clicks. Then remove microSD card slowly. Use "File Commander" application to display or manage various data such as still images, videos, music, etc. saved to the terminal or the microSD card.
Creating new folder 1 From the Home screen, Commander]. 2 3 4 Moving/Copying folder or file u[File From the Home screen, Commander]. Select an itemuTap a folder as required. 2 Select an itemuTap a folder as required. u[Folder]. Enter a folder nameu[OK]. 3 Mark a folder or file you want to move/copy. 4 5 / . Anywhere, Renaming folder or file 1 2 3 From the Home screen, u[File Commander]. Touch and hold a folder or file you want to renameu[Rename]. Enter a folder name or file nameu[OK].
Data communication Bluetooth function Bluetooth function is a technology which enables to connect with Bluetooth device such as PC, handsfree headset wirelessly. ･ The terminal does not communicate wirelessly with all types of Bluetooth devices. ･ Supported Bluetooth profiles (P.212) ❖Information If you turn off the terminal with Bluetooth turned on, Bluetooth function turns off. When you turn on the terminal again, Bluetooth function turns on automatically.
Making pair setting for the terminal and Bluetooth device To connect the terminal and Bluetooth device, pair them first. ･ Once paired, the setting with the Bluetooth device is saved. ･ For make pair setting, entering passcode (PIN) may be required. Passcode (PIN) of the terminal is "0000". If you cannot make pair setting when you enter "0000", see the documentation of your Bluetooth device. 1 From the Home screen, u [Settings]u[Bluetooth]u[Search for devices].
Disconnecting a Bluetooth device 1 2 3 From the Home screen, u[Settings]u[Bluetooth]. Tap the connected Bluetooth device name. [OK]. ･ To reconnect, tap the Bluetooth device name. NFC communication Sending/Receiving by onetouch function You can send/receive data to/from a device with NFC such as a mobile phone. If you use the one-touch function with a Sony product with NFC, simple operations allow you to send or receive images, music, photos or videos taken with the terminal.
Operations to send/receive and available data to send/receive depend on the compatible applications. Follow the onscreen instructions. ･ If the License agreement screen appears when sending/receiving data, read the content and follow the onscreen instructions. ･ When pointing marks to each other, sending/receiving may fail. In such case, operate again to send/receive. ･ The terminal does not communicate with all NFC devices. ･ For notes when holding over the other device, (P.106).
External device connection Connecting to PC 1 Connect the terminal to a PC using a microUSB cable (P.35). When you connect microUSB cable for the first time, the driver software for the terminal is installed to a PC. Wait for a while until installation is completed. ･ When "Install software" screen appears on the terminal, tap [Skip]. ･ Connecting to a PC with microUSB cable By connecting the terminal and a PC with the Micro USB Cable 01 (optional), etc., you can copy, move, delete data, etc.
･ When the terminal is connected to a PC with "Media transfer mode (MTP)" set in "USB connection mode", accessing to the microSD card from the terminal is unavailable. Therefore, functions using the microSD card in the applications such as "Camera", "Album", etc. may not be available. Disconnecting the microUSB cable safely ･ Do not disconnect the microUSB cable during data transferring. Data may be damaged.
Connecting the terminal to a PC on a Wi-Fi network You can access the internal storage and a microSD card in the terminal from the PC paired via Wi-Fi network. ･ Use Microsoft Windows Vista, Microsoft Windows 7 or Microsoft Windows 8/8.1 for a PC to be paired. Microsoft Windows XP and other OSs are not available. ･ For Microsoft Windows 8.1, remove the terminal from the PC, click "How to connect" on PC Companion, then follow the onscreen instructions.
2 [Connect]. The terminal and the PC are connected in "Media transfer mode (MTP)" on a WiFi network, and you can exchange data files. ･ To disconnect, tap [Disconnect]. ･ To cancel the connection setting, tap [Forget]. Until the connection setting is canceled, the connection setting retains even if you connect/disconnect repeatedly by coming in and out of a Wi-Fi area.
Playing a media file in the terminal with a DLNA device Connecting to other devices You can play a media file in the terminal with a DLNA device using Throw function. 1 2 3 From the Home screen, tap any of [Album]/[WALKMAN] or from the Home screen, u[Movies]. Tap a file you want to playu u [Throw]. Tap a device on the device list. Connecting a TV This terminal supports MHL connection. For an HDMI compatible TV, use a commercially available HDMI connector (MHL adapter) and an HDMI cable etc.
･ ･ ･ ･ ･ When MHL is connected, radio wave condition may be affected according to your environment for the usage. When you do not use MHL connection, remove the MHL cable or HDMI adapter and cancel MHL connection. If the HDMI cable remains connected, the battery may be consumed quickly. The terminal does not support resolution 720u576p (50Hz) for MHL output to TV. You can operate the TV Launcher screen, the Home screen or applications using a TV remote control if connecting the following devices.
International roaming Overview of International roaming (WORLD WING) With the international roaming (WORLD WING), you can use the terminal without changing phone number or mail address in the service area of the overseas network operator affiliated with DOCOMO. You do not need to change the settings of call and SMS. ■ Supporting networks The terminal is Class 4. The terminal works in a 3G roaming area and GSM/GPRS service area.
Checking before overseas use Before leaving Japan To use the terminal overseas, check the following in Japan. ■ Subscription ･ ■ Charging ･ ■ Check if you subscribe WORLD WING. For details, contact "General Inquiries" on the last page. For AC adapter for charging overseas travel, use optional "AC Adapter 03" or "AC Adapter 04".
After arriving overseas When you arrive overseas and turn on the terminal, an available network is automatically set. Connectivity When you have set "Search mode" of "Service providers" in "Mobile networks" to "Automatic", optimized network is automatically selected (P.185). When you use a network operator of a country/region covered by the flat-rate service, you can use the service with flat-rate packet communication charges overseas up to the specified upper limit per day.
Settings for overseas use By default, the terminal automatically searches available network and connect to it. To switch network manually, set as follows. Setting network mode 1 2 From the Settings screen, u[Settings]u[More...]u[Mobile networks]u[Network Mode]. Tap any of [LTE/3G]/[GSM only]/ [LTE (preferred)/3G/GSM]. ･ If you select "LTE (preferred)/3G/GSM" to switch available network automatically. ❖Information If you cannot search networks, disable mobile data communication (P.
Making/Receiving a call in the country you stay When you arrive overseas and turn on the terminal, an available network is automatically set. ･ Check that the battery and signal levels are high enough. ･ Depending on the network operator, even if the Caller ID notification is active, the caller ID may not be notified or appear properly. In this case, calls cannot be made from the call log.
Making a call within the country you stay Receiving a call in the country you stay You can make a call by entering the phone number of the other party's land-line phone or mobile phone in the same way you do in Japan. 1 From the Home screen, tab. 2 Enter a phone number. 3 4 ･ u"Dial" To make a call to land-line phone, enter the area code (city code) + other party's phone number. . When the call is finished, tap [End call]. You can receive a call using the international roaming service.
■ Having someone make a call from other than Japan to the country you stay You have to receive a call through Japan no matter where you are; therefore, the other party needs to enter the international call access code and "81" (Country code of Japan). International access code - 81 - 90 (or 80) XXXX - XXXX International roaming settings Make settings for using international roaming or international calls. ･ For some overseas network operators, settings may not be made. 1 2 From the Home, u .
Setting International dialing assist 1 2 From the Home screen, u [Call settings]u[Roaming settings]. 3 [International dial assist]. . Setting Network service (overseas) Set network service such as voice mail from overseas. ･ You need to set "Remote operation settings" to activate in advance (P.84). ･ If you make the settings overseas, you are charged a call fee to Japan from the country you stay. ･ For some overseas network operators, settings may not be made.
After returning to Japan When you return to Japan, the terminal is connected to DOCOMO network automatically. If connection is failed, perform the following operations. ･ Set "Network Mode" to "LTE (preferred)/3G/ GSM" (P.185). ･ Set "Search mode" to "Automatic" in "Service providers" (P.185).
Appendix/Index Optional and related devices A variety of optional devices allows you to expand the terminal's capabilities by supporting a wide range of purpose, including personal and business uses. Some accessories are only available in some areas. For details, please contact a sales outlet such as docomo Shop. For details on optional devices, see the users manual of each device.
■ Power supply Cannot power on the terminal. ･ Check if the battery is not run out. → P.31 Screen is frozen, the power cannot be turned off. ･ When the screen freezes or the power cannot be turned off, open the docomo mini UIM card slot coveruPress and hold red OFF button for approximately 3 seconds and release it when the terminal vibrates 3 times to force stop.
■ Terminal operation Become hot while operating/charging. ･ While calling, depending on the radio wave condition or call duration time, the terminal may become hot. This condition is not abnormal. ･ While operating or charging, or if you watch 1Seg, record video, etc. for a long time while charging the battery, the terminal, internal battery or adapter may become hot. There is no problem about operation and continue to use it. The operation time provided by the battery is short.
The clock is not on time. ･ The clock time may become wrong when the power is turned on for a long time. Check if "Automatic date & time" and "Automatic time zone" are marked and turn the power off and on in a place with strong radio wave conditions. → P.166 The terminal operation is unstable. ･ Instability may be caused by applications that you installed after purchasing the terminal.
Cannot call (Even when moving, does not disappear, or although radio waves are enough, making/receiving calls is unavailable.) ･ Turn the power OFF and ON, or remove and attach docomo mini UIM card. → P.29, P.36 ･ Due to the nature of radio waves, making/ receiving calls may be unavailable even when "not out of service area" or " appears on the display for the radio wave condition". Move to the other place and call again. ･ Check if you set call rejection. → P.84, P.
Set Image stabilizer/SteadyShot™ and shoot. → P.123 ･ To shoot a portrait image, use "Face Detection". → P.127 Photo or video shot with flash is whitish. ･ If there is your finger or cover around the camera lens, flash light may reflect and affect photo or video shooting. ･ ■ 1Seg Unable to watching 1Seg. ･ Are you out of terrestrial digital TV broadcasting service area or in a place where airwave is weak? → P.110 ･ Check if channels in the current location are saved. → P.
Cannot receive calls overseas. ･ Is "Restricting incoming calls" set to "Activate restriction"? → P.188 No caller ID is notified/a notified caller ID is different from that of the caller/ functions for using contents saved in phonebook or those using Caller ID notification do not operate. ･ Even if a caller notifies its caller ID, it is not displayed on the terminal unless the network or network operator notifies it.
■ Map/GPS ● Mobile network not available Cannot set AUTO-GPS service information. ･ Check if the battery level is low and AUTOGPS function stops. If AUTO-GPS stops due to "Low-power operation settings", AUTO-GPS service information cannot be set. In this case, set "Low-power operation settings" to "Not suspend" or charge the battery. → P.31, P.158 ･ Check if "AUTO-GPS operation settings" is marked. → P.158 Install docomo mini UIM card correctly (P.29), then move to a location where radio signal reaches.
● Memory is getting low Available memory space in the terminal is low. If you continue to use the terminal, some functions or applications may not work. Activate the setting screen and select unnecessary applications, then tap [Uninstall] to delete the applications (P.157). ● Memory full. There is no memory space in the microSD card. Delete unnecessary data (P.171) to save the memory space. スマートフォンあんしん遠隔サ ポート (Smartphone Anshin 1 smartphone). 0120-783-360 Business hours: 9:00 a.m. to 8:00 p.m.
Warranty and After Sales Services Warranty Make sure that the warranty is received with the terminal upon purchase. Check to be sure that " 販売店名・お買い上げ日 (the name of the retailer, date of purchase)", and other items have been filled out on the warranty before storing it in a safe place. If any necessary information is not provided, immediately contact the retailer and request to complete the warranty. The terminal comes with a year's free warranty starting from the date of purchase.
■ Within the warranty period We repair the terminal free of charge based on the terms documented in the warranty. ･ When requesting a repair, make sure to bring the warranty card with the terminal. Repair requests that are not accompanied by the warranty or that involve malfunction and damage due to incorrect handling by the owner (damage of liquid crystal, connector, etc.) will only be repaired at the owner's expense, even if the warranty period is still effective.
- Glued decorations on the terminal using adhesion bond, etc. - Change the parts such as exterior to other than DOCOMO standard parts ･ Malfunction and damage due to modifications will be repaired at the owner's expense, even if the warranty period is still effective. ● Do not remove the inscription sticker on the terminal. ･ Note that if the inscription sticker is removed or is replaced with a different sticker, it may disqualify the terminal from repairs.
Software update It is a function to connect to a network and check if software update for SO-04F is required, then update software if required. Software update is announced on NTT DOCOMO website. ･ There are following 3 methods for update. - Automatic Update : Update file is downloaded automatically and write it at the set time. When the rewrite start time is not set, software is automatically rewritten between 2 a.m. and 5 a.m. - Immediate Update : Update immediately.
If software update is not needed, "No update is needed." appears. ･ During international roaming or when the terminal is out of service area, "When docomo network is not available, or during roaming, software update is not available even if Wi-Fi is connected." or "When docomo network is not available, or during roaming, install cannot be started even if Wi-Fi is connected." appears. The same messages appear even while connecting via Wi-Fi.
When software update is necessary If the update file is downloaded automatically, appears on the status bar. ･ When the rewrite start time is reached with displayed, software is automatically rewritten. When the rewrite start time is not set, software is automatically rewritten between 2 a.m. and 5 a.m. 1 Drag the status baruTap notification of Software update. ･ 2 Software update notice screen appears. Perform a target operation. Updating software immediately Software update starts immediately.
■ Post-update display appears on the status bar. Drag the status bar downwardsuTap the notification, a message indicating that software update is complete appears. Reserving software update You can preset time to update the software if you want to specify another time for installing the update file. 1 Display the Software update notice screenu[Set Time]. 2 Set a timeu[Set].
Upgrade Android software Upgrade Android software This function allows you to connect the network, check if Android software in the terminal needs to be upgraded, and download update file to upgrade if necessary. Check the notification icon (Upgrade Android software) on the status bar or the NTT DOCOMO website for available Android software. The following updates are applied to the terminal by Upgrade Android software.
During international roaming or when the terminal is out of service area, "When docomo network is not available, or during roaming, install cannot be started even if Wi-Fi is connected." appears. ･ When Upgrade Android software is performed, some settings are initialized. Make the settings again. ･ When upgrading Android software, the private information concerning the terminal (model, serial number, etc.) is automatically sent to the server of DOCOMO.
Installing update file When downloading the update files is complete, installing to the terminal is available. ･ "Install now" : Immediately install the update file. ･ "Install later" : Install the update file at reserved time. ❖Information When installing is complete, the terminal restarts. When "Install later" is tapped, time for installing is automatically set. To change the start time, from the Home screen, u[Settings]u[About phone]u [Upgrade Android software], then change start time.
PC Companion is already installed 1 Check if PC Companion is activated on the PC. If not, activate PC Companion from the Start menu. 2 Connect the terminal to a PC using a microUSB cable. 3 Operate following the onscreen instructions on the PC. ･ If available software update is found, it is automatically notified. When software update is failed If software update failed and the terminal does not boot, restore the terminal by performing restoration using PC Companion.
Charging time Continuous 1Seg watching time Display Type/ Colors Size Resolution Image pickup device Type Size AC Adapter 03 : (alone) Approx. 200 min., (for Desktop Holder SO21 combination use) Approx. 200 min. AC Adapter 04 : (alone) Approx. 160 min., (for Desktop Holder SO21 combination use) Approx. 160 min. DC Adapter 03 : Approx. 220 min. Approx. 500 min. TFT (Triluminos® Display for Mobile) 16,777,216 colors Approx. 4.
Video recording size Frame rate Wireless LAN Bluetooth Headset jack Video camera : 1920u1080 (Full HD 16:9) 1280u720 (HD 16:9) Front video camera : 1920u1080 (Full HD 16:9) 1280u720 (HD 16:9) Max. 30 fps Compliant with IEEE802.11a/b/g/n/ ac*3(Corresponding frequency band to IEEE802.11n : 2.4GHz/5GHz) 4.0*4 power class 1 Within approx.
Continuous stand-by time is an estimate of the stand-by time when radio signal reception is normal. Stationary continuous stand-by time is the estimated average operation time when radio signal reception is normal. In certain circumstances, the stand-by time may drop to as low as half the time shown due to the battery charge, function settings, temperature, or radio signal reception in the area (no reception or weak).
* Some files may not be viewed properly due to corrupted layouts. ■ Recording time for 1Seg (Estimation) Recordable time to save to a Approx. 320 min. microSD card (1GB) ■ Number of still pictures (Estimation) Savable number of shot images to the internal storage Savable number of shot images to a microSD card (1GB) Up to approx. 17,190 images Up to approx. 1,570 images * Shot images with a resolution of 1920u1080 (2MP) with file size of 634KB.
Portuguese (Portugal)/Romanian/Albanian/ Slovak/Slovene/Serbian/Finnish/Swedish/ Tagalog/Vietnamese/Turkish/Greek/ Bulgar/Kazakh/Macedonian/Russian/ Armenian/Ukrainian/Marathi/Hindu/ Bengalee (Bangladesh)/Bengalee (India)/ Tamil/Telugu/Kannada/Malayalam/Thai/ Korean/Chinese (Traditional)/Chinese (Simplified)/Chinese (Hong Kong) ■ Text language (Character entry) Icelandic/Arabic/Albanian/Italian/ Indonesian/Anglo-Indian/Ukrainian/ Esthonian/Dutch/Kazakh/Catalan/Galician/ Greek/Croatian/Javanese/Swedish/ Spa
Certificate and compliance You can check details of certificate and compliance mark specific to the terminal (including certificate number/compliance number). 1 2 From the Home screen, u [Settings]. [About phone]u[Legal information]u[Certificates]. End User Licence Agreement Software delivered with this device and its media is owned by Sony Mobile Communications AB, and/or its affiliated companies and its suppliers and licensors.
Sony Mobile and its third party suppliers and licensors retain all rights, title and interest in and to the Software. To the extent that the Software contains material or code of a third party, such third parties shall be beneficiaries of these terms. This licence is governed by the laws of Sweden. When applicable, the foregoing applies to statutory consumer rights.
Intellectual Property Right About the Copyright and Portrait rights Copyrighted contents you recorded or obtained from sites or Internet home pages using this product by downloading or other means, such as documents, images, music data, software, are prohibited from reproduction, transformation and transmission over public lines without consent of the copyright holders, unless intended for personal use or any other purpose permitted by law.
Rovi, G-GUIDE, G-GUIDE MOBILE and their logos are trademarks or registered trademarks in Japan of U.S. Rovi Corporation and/or its affiliates. ･ Xperia, TrackID, Info-eye, Socialife and Xperia Lounge are trademarks or registered trademarks of Sony Mobile Communications AB. ･ Media Go is a trademark or registered trademark of Sony Media Software and Services. ･ PlayStation, and DUALSHOCK are trademarks or registered trademarks or Sony Computer Entertainment Inc.
MHL, Mobile High-Definition Link and MHL logo are trademarks or registered trademarks of MHL, LLC. ･ HDMI, HDMI logo and HighDefinition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ･ MirrorLink and MirrorLink logo are trademarks or registered trademarks of Car Connectivity Consortium LLC. ･ Linux is a registered trademark of Linus Torvalds,individual.
Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson. ･ This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/) ･ Other product and company names mentioned herein may be the trademarks of their respective owners. In context, TM and ® mark are omitted. ･ Any rights not expressly granted herein are reserved. All other trademarks are property of their respective owners. SIM unlock This terminal supports SIM unlock.
Index A About phone ････････････････････････ 167 Access point Initializing ･････････････････････････ 148 Setting････････････････････････････ 147 Accessibility ･････････････････････････ 166 Account Removing ･････････････････････････ 165 Setting････････････････････････････ 165 ACCOUNTS ･･････････････････････････ 165 Adjusting sound volume ･･･････････････ 153 Advanced call settings ･･････････････････ 85 Airplane mode ･･･････････････････････ 147 Alarm & clock ････････････････････････ 137 Setting alarm ･････････
Brightness ･･･････････････････････････ Browser ･････････････････････････････ Adding tab ････････････････････････ Bookmark ･････････････････････････ History ････････････････････････････ Incognito tab ･･････････････････････ Link ･･････････････････････････････ Searching text･･････････････････････ Settings ･･･････････････････････････ 154 100 101 102 102 101 102 101 102 C Calendar ･････････････････････････････ 54 Call･･････････････････････････････････ 78 Calling screen ･･･････････････････････ 81 Declining ････
D Data Storage Box ･･････････････････････ 56 Data usage ･･････････････････････････ 145 Date & time ･･････････････････････････ 166 Daydream ･･･････････････････････････ 154 DEVICE･･････････････････････････････ 151 Dial ･････････････････････････････････ 53 Dictionary English user dictionary ････････････････ 71 Japanese user dictionary ･･････････････ 71 Disaster kit ･･･････････････････････････ 56 Display･･････････････････････････････ 153 dmarket･････････････････････････････ 103 dmenu ･･･････････････････････････
H International roaming service ･･･････････ 182 Hanashite Hon'yaku ････････････････････ 56 Hangouts ････････････････････････････ 55 HDMI ･･･････････････････････････････ 180 Home application docomo ････････････････････････････ 72 Switching ･･････････････････････････ 59 Xperia ･････････････････････････････ 46 Home screen ･･････････････････････････ 46 Adding (docomo LIVE UX) ･････････････ 74 Adding (Xperia Home) ････････････････ 47 Deleting (docomo LIVE UX) ････････････ 74 Deleting (Xperia Home) ････････････
MHL ････････････････････････････････ 180 microSD card Settings ･･･････････････････････････ 155 Structure ･･････････････････････････ 168 Missed call････････････････････････････ 83 Moji-Henshu ･･････････････････････････ 61 Movies ･･･････････････････････････････ 53 My Magazine ･････････････････････････ 77 Display category setting ･･････････････ 77 My profile Editing ･････････････････････････････ 90 Phonebook ･････････････････････････ 87 N Network mode ･･･････････････････････ 185 Network service ･･････････････
Play Store ･･･････････････････････････ 103 Deleting ･･････････････････････････ 104 Installing ･･････････････････････････ 103 Playing video ････････････････････････ 131 Portrait view ･･････････････････････････ 41 Power management ･･･････････････････ 156 Proximity sensor ･･･････････････････････ 28 Public mode (power OFF) setting ･････････ 84 Q QWERTY keyboard ･････････････････････ 62 R Recent calls screen ･････････････････････ 82 Recording videos ･････････････････････ 121 Reject call with message ･･････････
T Task manager ･････････････････････････ 58 Tethering ････････････････････････････ 148 Bluetooth tethering ･････････････････ 150 USB tethering ･･････････････････････ 149 Wi-Fi tethering ･････････････････････ 149 Text editing ･･･････････････････････････ 66 Theme Home screen ････････････････････････ 49 Timer ･･･････････････････････････････ 138 ToruCa ･･････････････････････････････ 108 Touch screen ･･････････････････････････ 39 Drag･･･････････････････････････････ 39 Flick ･･･････････････････････････････ 39 Pin
Numerics 1Seg ･･･････････････････････････････ Program guide ･････････････････････ Recording ･････････････････････････ Recording reservation ･･･････････････ Settings ･･･････････････････････････ TV link ････････････････････････････ Watching reservation ････････････････ Watching 1Seg ･････････････････････ 109 115 114 115 112 114 115 111 Appendix/Index 229
Make various applications or charge your billing plan, check your charges and points, and more online. sp-mode: dmenu ⇒ " お客様サポート (Customer support)" ⇒ " 各種お申込・お手続き (Various applications/procedures)" (Packet communication free) (In Japanese only) PC: My docomo (http://www.mydocomo.com/) ⇒ 各種お申込・お手続き (Various applications/procedures) (In Japanese only) * When using with sp-mode, "Network security code" is required. * When using with sp-mode, you may be charged.
General Inquiries 0120-005-250 (toll free) Repairs ■From DOCOMO mobile phones (In Japanese only) (No prefix) 113 (toll free) *Service available in: English, Portuguese, Chinese, Spanish. *Unavailable from part of IP phones. (Business hours: 9:00 a.m. to 8:00 p.m.) *Unavailable from land-line phones, etc. ■From DOCOMO mobile phones (In Japanese only) (No prefix) 151 (toll free) ■From land-line phones (In Japanese only) *Unavailable from land-line phones, etc.
