INSTRUCTION MANUAL 13.
Introduction ● "Instruction Manual" (PDF file) Operations and settings of each function are explained. It can be downloaded from NTT DOCOMO website. http://www.nttdocomo.co.jp/english/support/ trouble/manual/download/index.html Thank you for your purchase of "SO-02F". For proper use of the SO-02F, read this manual carefully before and while you use the SO-02F. * You can download the latest information of " ク イックスタートガイド (Quick Start Guide)".
Operation descriptions In this manual, each key operation is described with P, x, y, r, m, k. And selection operations of the icons or function items on the touch screen are described as follows. Description Operation From the Home screen, From the Home screen, tap (Applications button), tap and tap and then tap "Settings" on [Settings]u[About the next screen and "About phone]. phone" on the following screen in order. Touch and hold an Keep touching an icon icon. longer (1-2 seconds).
Supplied accessories ･ ･ クイックスタートガイド (Quick Start Guide) (In Japanese only) SO-02F (with warranty) ･ SO-02F のご利用にあたっての注意事項 安全上／取り扱い上のご注意 (Notes on usage Safety/Handling precautions) (In Japanese only) ･ Back Cover SO22 ･ Desktop Holder SO17 (with warranty) For details on optional devices, see "Optional and related devices" (P.257).
Contents ■ Supplied accessories. . . . . . . . . . . . . . . . . 2 ■ About using the terminal . . . . . . . . . . . . 5 ■ Safety Precautions (Always follow these directions) . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ■ Handling precautions. . . . . . . . . . . . . . . 17 ■ Waterproofness/Dustproofness . . . . . 23 Before Using the Terminal . . . 29 Part names and functions................................................29 docomo mini UIM card ....................................................
Socialife .................................................................................... 180 Location services................................................................ 181 Calendar................................................................................... 186 Alarm & clock........................................................................ 188 ドコモバックアップ (docomo backup).................. 191 OfficeSuite ..............................................................................
Contents/Precautions About using the terminal The terminal supports LTE, W-CDMA, GSM/ GPRS and Wireless LAN Systems. ･ Because a terminal operates using radio frequencies, it cannot be used inside a tunnel, underground, in a building or other locations where radio waves do not reach the terminal, in locations with weak radio wave condition, or out of Xi/FOMA service area.
The terminal automatically performs communication for synchronizing data, checking the latest software version, maintain connection with the server, etc. If you transmit a large amount of data such as downloading applications or watching video, a packet communication charge becomes high. Subscription of packet flat-rate service is highly recommended. ･ Depending on the applications or service you use, packet communication charge may be applied even in Wi-Fi communication.
The terminal supports only sp-mode, mopera U and Business mopera Internet. Other providers are not supported. ･ To use tethering, subscription of sp-mode is required. ･ Packet communication charge when using tethering varies depending on the charging plan you use. Subscription of packet flat-rate service is highly recommended. ･ For details on usage charge, etc., refer to the following website. http://www.nttdocomo.co.
■ The following symbols indicate specific directions. Indicates prohibited actions. 1. Handling the terminal, battery pack, adapter, desktop holder, docomo mini UIM card (common) Don’t DANGER Indicates not to disassemble. No disassembly Don’t No liquids No wet hands Do Unplug ■ Indicates not to use where it could get wet. Indicates not to handle with wet hands. Indicates compulsory actions in accordance with instructions. Indicates to remove the power plug from the outlet.
WARNING Don’t Don’t Don’t Do Do not subject the equipment to excessive force or throw it. Doing so may cause fire, burns, injury or electric shock. Do Do not allow the contacts for the desktop holder, the microUSB jack or headset jack to touch conducting foreign substances (a piece of metal, pencil lead, etc.). Never allow these objects to get inside. Doing so may cause fire, burns, injury or electric shock. Do not cover or wrap the equipment with a cloth or bedding in use or while charging.
Do Be careful especially when using the terminal connected to the adapter continuously for a long time. If you play a game, watch 1Seg, etc. for a long time while charging, the temperature of the terminal, battery pack and adapter may rise. If you are directly in contact with hot parts for a long period of time, it may cause your skin to become red, itchy, or develop a rash depending on your physical condition and also it may cause low-temperature burn. Don’t Don’t 2.
Do Do Do Always keep the terminal away from your ear when you talk setting the hands-free function. Also, when you play game, play back music, etc. connecting the Earphone/Microphone, etc. to the terminal, adjust the volume adequately. If the volume is too loud, it may cause difficulty in hearing. Moreover, if you barely hear the surrounding sounds, it may cause an accident. Do If you have a weak heart, set the vibrator or ringtone volume carefully. Failure to do so may affect your heart.
Don’t Don’t Don’t Do Do Do Do not use damaged terminal. Doing so may cause fire, burns, injury or electric shock. 3. Handling battery pack ■ Check that the battery type matches the type displayed on the battery pack label. Display Li-ion 00 When using the motion sensor, check the safety around you, hold the terminal firmly, and do not shake it unnecessarily. May cause accident such as injuries.
WARNING Don’t Do Do If the battery pack seems to have abnormalities such as deformation or scratches due to falling, never use it. Doing so may cause battery pack to ignite, burst, heat or leak. If the battery pack leaks or gives off a strange smell, immediately remove it from the vicinity of open flames. The leaking liquid may ignite fire, catch fire, or explode. Don’t Do not discard the battery together with other garbage. Doing so may cause igniting or environmental destruction.
Don’t Do not short-circuit the charging jack while it is connected to the power outlet or cigarette lighter socket. Do not touch the charging jack with your hands, fingers, or any part of your body. Doing so may cause fire, burns or electric shock. Don’t Do not place heavy objects on the adapter cord. Doing so may cause fire, burns or electric shock. Don’t When you insert and remove the AC adapter from power outlet, do not contact a metal strap or other metal objects with the jack.
5. Handling the docomo mini UIM card Do CAUTION Do Be careful of the cut surface when removing docomo mini UIM card. Failure to do so may cause injury. 6. Handling the terminal near electronic medical equipment Do When you get close to other people within 15 cm just like not having enough space to turn around, set the radio wave of the terminal to OFF beforehand (Airplane mode, to turn OFF, etc.).
7.
cotton swab etc. When cleaning, be careful not to damage the terminals. Handling precautions ■ ･ Common precautions ･ SO-02F is waterproof/dustproof, however, do not allow water or dust to seep into the terminal and do not allow accessories or optional devices to get wet or dust. Extreme temperature changes may produce condensation and corrode the internal parts of the terminal, causing it to malfunction. ･ ･ ･ Clean the terminals occasionally with a dry cotton swab.
Using the terminal near land-line phone, television or radio may cause interference in these electric appliances. Make sure to move far away from them when using the terminal. ･ Note down the information saved in the terminal in a separate note and keep it safely. ･ ･ Doing so may cause removal of battery pack, malfunction or damage. ･ Do not drop or give a strong impact to the terminal. Doing so may cause malfunction or damage. ･ ･ Doing so may cause malfunction or damage.
･ Be careful especially about the following points when preserving the battery pack. - The battery is fully charged (immediately after the charging is complete) - The battery has run out (the phone cannot power on) The performance and life of the battery pack may deteriorate. It is recommended that you store the battery with the remaining battery level of about 40% as a guide. ■ The adapter precautions Charge the battery in an environment with the proper ambient temperature (5 ℃ to 35 ℃ ).
･ Do not bend a docomo mini UIM card or place a heavy object on it. 1 : The estimated interference distance is 10 m or less. 4 : The estimated interference distance is 40 m or less. 8 : The estimated interference distance is 80 m or less. : The full band between 2400 MHz and 2483.5 MHz is used and the band of the mobile identification device can be avoided. Available channels vary depending on the country. For use in an aircraft, contact the airline beforehand. Doing so may cause malfunction.
■ Wireless LAN (WLAN) precautions Wireless LAN (WLAN) exchanges information using radio waves, and allows you to freely establish LAN connection if you are within an area where radio wave reaches. On the other side, if you communicate without appropriate security settings, communications may be intercepted or hacked by malicious parties. It is recommended to make necessary security settings on your responsibility and expense.
･ 5GHz device cautions The following channel numbers and frequency bands are available in Japan. Channel number (Ch) 5.2GHz band 5.3GHz band 5.6GHz band 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 Frequency band (MHz) 5,180 5,200 5,220 5,240 5,260 5,280 5,300 5,320 5,500 5,520 5,540 5,560 5,580 5,600 5,620 5,640 5,660 5,680 5,700 FCC Caution: This device shall only be assigned to FCC approved access point when using 5 GHz WLAN for indoor and outdoor operation.
■ Note ･ Do not use a remodeled terminal. Using a remodeled terminal violates the Radio Law/Telecommunications Business Act. A "Technical Conformity Mark " shown on the terminal certifies that the terminal meets technical regulations for specified radio equipment that are based on the Radio Law and also certifies a technical standards conformity for terminal equipment that are based on the Telecommunications Business Act.
What you can do with waterproofness/dustproofness of SO-02F You can talk or watch 1Seg program without an umbrella in the rain (for rainfall of 20 mm or less per hour). - Do not open or close microUSB jack cover, headset jack cover or back cover when your hands are wet or waterdrops are attached to the terminal. ･ You can wash the terminal when it gets dirt or stained with liquid other than tap water.
■ Opening the headset jack cover and microUSB jack cover Open the covers with your fingertip by the grooves. ■ 1 ■ ■ Closing the headset jack cover and microUSB jack cover Press the covers in the directions of the arrows and ensure there are no gaps. 1 Removing back cover Insert the tip of your finger into the groove at the bottom of the terminal, and lift up the back cover in the direction of the arrow ( ).
Important precautions Do not perform actions shown in the illustrations below. Using Soap/Detergent/ Washing with brush/sponge Bath powder It is recommended to replace the parts for maintaining waterproof/dustproof property once every two years regardless of whether any abnormality is present. DOCOMO replaces the parts as a chargeable service. Bring the terminal to a sales outlet such as a DOCOMO-specified repair office.
Do not put the terminal in hot water, use it in a sauna or apply hot airflow (from a hair dryer etc.) to it. ･ Do not move the terminal in water or slam the terminal against the surface of water. ･ If you put the terminal in tap water, be sure to have it within 30 minutes. ･ When you use the terminal in swimming pool, obey rules of the facility. ･ The terminal does not float on water. ･ Do not leave water on the terminal. In cold region, the terminal freezes up and may cause malfunction.
c d Swing the terminal in about 10 times against dry, clean cloth etc. to wipe off water remaining in the microphone, earpiece, speaker, power key, volume key, camera key, contacts for the desktop holder, each cover (microUSB jack cover/headset jack cover/back cover), etc. Wipe off water drained from the terminal with dry, clean cloth etc., and dry naturally. ･ Wipe off water drained from the terminal with dry, clean cloth etc., and dry naturally.
Part names and functions a b c ef g s h l t i u m p d n q j o r k a Proximity sensor : Turns on or off the touch screen to prevent misoperation during a call. b Earpiece/Notification LED c Front camera lens d Touch screen e Camera lens f Flash/Photo light g Second microphone : Reduce noise to make easy to listen. h FOMA/Xi/GPS antenna section*1 i mark j FOMA/Xi antenna section*1 k Wi-Fi/Bluetooth antenna section*1 l microUSB jack : Use for charging or connecting MHL.
docomo mini UIM card The docomo mini UIM card is an IC card recorded user information such as your phone number etc. ･ You can use the terminal with docomo mini UIM card. If you have a UIM or FOMA card, bring it to a docomo Shop to replace. ･ When docomo mini UIM card is not inserted to the terminal, making calls, packet communication, etc. are not available. ･ For details on docomo mini UIM card, refer to the docomo mini UIM card manual.
Removing docomo mini UIM card 1 Hook the groove on the bottom of the terminal with your fingertip and lift up the back cover to remove. 2 Remove the battery pack, hook the projection part of the tray ( ) with your fingertip, pull out the tray straight and remove the docomo mini UIM card. 3 Press the tray straight to the end, install the battery pack and attach the back cover, then make sure that there are no gaps between the terminal and the back cover.
Life of battery pack Charging The battery pack is not fully charged by default. ･ For details on estimate of charging time, see "Main specification" (P.273). Operation time on full charge (estimate) The following time varies by the battery pack condition or operating environment. For details, see "Main specification" (P.275). Continuous FOMA/3G stand-by time GSM LTE Continuous call time FOMA/3G GSM Approx. 420 hours (stationary) Approx. 360 hours (stationary) Approx. 390 hours (stationary) Approx.
The AC Adapter 04 (optional) is compatible with AC 100 V to 240 V. For using the terminal overseas, a plug adapter that fits the electrical outlets in the country you stay is needed. Do not use an electrical transformer for overseas use to charge the terminal. ･ Use a compatible AC adapter or microUSB cable for charging (P.257). If you use a charger other than the compatible one, charging may not be available or operations may not be performed correctly.
3 Insert the terminal into the desktop holder. ･ Notification LED lights on the terminal. For the notification LED for charging, see "Notification LED" (P.42). 4 When charging is complete, holding the desktop holder, lift the terminal up to remove. 5 Remove the power plug of the AC adapter from the power outlet. 6 Remove the microUSB plug of the AC adapter from the desktop holder. ❖Note You cannot charge the battery by connecting the desktop holder to a PC.
❖Note Check the connecting direction to connect correctly. Wrong connection may cause damage. ･ Charging with DC adapter Charging with a PC When using Micro USB Cable 01 (optional) for charging, do the following procedures. ･ For opening/closing microUSB jack cover, see "To ensure waterproofness/dustproofness" (P.24, P.25).
4 Remove the microUSB plug of the microUSB cable evenly from the terminal. 5 Close the microUSB jack cover, firmly press it and make sure that there are no gaps between the terminal and cover. Turning power on/off Turning power on 1 Press and hold P for over a second. ･ ❖Note The terminal vibrates and unlock screen appears after a while. Installation of an MTP driver to a PC is required when charging the battery with a Microsoft Windows XP PC, because "USB connection mode" (P.
If you have activated the screen lock (P.218) or SIM card lock (P.217), unlock screen/PIN code entry screen appears when turning power on. For unlocking the screen lock, see "Unlocking the screen lock" (P.219), and for PIN code entry, see "Entering the PIN code when powered on" (P.217). ･ Turning power off 1 Press and hold P for over a second. 2 3 Tap [Power off]. Tap [OK]. ❖Information Press P for over a second and then touch and hold [Power off ] and tap [OK] to restart the terminal in safe mode.
Initial settings For the first time you turn on the terminal, flick (swipe) up/down the screen to unlock the screen and follow the onscreen instructions to make initial settings. 1 Select [English (United States)]u Tap [Done], and tap . ･ 2 3 After this step, follow the onscreen instructions to make the following settings, and tap or [Finish]. - Connect to a Wi-Fi network - Connecting to Sony Entertainment Network - Set accounts and auto-sync - Select preferred applications 4 Tap [OK].
Basic operations Basic key icon operation x y r x Back Go back to the previous screen. Or close a dialog box, an option menu, the Notification panel, etc. y Home Go to the Home screen. Touch and hold the icon and drag to to activate " しゃべってコン シェル (Shabette concier)" or "Google" application. r Recently Display recently used applications used apps in thumbnail list to activate or delete an application from the list (P.56). Also, use or set small apps (P.56).
■ Drag Switching portrait or landscape view automatically Touch the screen, drag to the desired position and release the finger. ■ Scroll When whole content cannot be displayed, flick up/down/left/right displayed content to scroll (move) the display position. You can set the screen orientation to switch between landscape and portrait view automatically according to the terminal orientation. 1 2 Drag the status bar downwards. Tap [Auto rotate]. ･ When the setting is enabled, appears.
Setting silent mode 1 2 Drag the status bar downwards. Tap [Sound]. ･ Tap to activate silent mode (vibration) and tap to activate silent mode (mute). Tap to cancel silent mode. Capturing screenshot You can save the current displayed screen as an image (screenshot). 1 ･ ❖Information Press and hold P for over a second and then tap / / in the pop-up screen to switch Mute (Ringtone 0)/Vibrate/Off (disabling silent mode). ･ From the Home screen etc., press and hold lower part of m to set vibrator.
Marking/Unmarking to switch setting When a checkbox/radio button is displayed besides a setting item, mark or unmark a checkbox/radio button to switch on/off for the setting. / / / Switch on/off the setting for a checkbox. Switch on/off the setting for a radio button. Tap or drag left or right to switch on/off the setting. Notification LED Notification LED provides information on the terminal status, incoming calls, mail reception, etc.
While using "Album" application or "WALKMAN" application, the notification LED lights according to the content. While receiving a call, it blinks according to the color of "Themes" (P.207) in Display settings. ･ Status bar A status bar appears at the top of the screen. In the status bar, the terminal status and notification are displayed. Notification icons appear on the left side, and status icons appear on the right side of the status bar.
Notification icon The main notification icons displayed on the status bar are as follows. New email message New Gmail message New message (SMS) Problem with message (SMS) delivery New instant message New Area Mail Screenshot captured New Facebook message Uploading data to Facebook Uploading data to Facebook completed Facebook setting request notification Receiving/Downloading data Sending/Uploading data Notification of data reception etc.
Wi-Fi open network available Connecting to a VPN The terminal set as media server/Connection request notification received Error message Warning message Problem with sync Setup guide unchecked Some notifications are hidden Notification such as personal area received Wi-Fi tethering ON Setting USB tethering Setting Wi-Fi tethering and USB tethering Positioning with GPS AUTO-GPS is set Green Heart energy saving icon (remove the AC adapter from the power outlet) Setting Omakase Lock Available memory on the ter
On the Notification panel, number of unread mails, missed calls, and name of callers can be checked. Depending on the notification status and application on the Notification panel, sender, subject, part of message of unread mail can be checked. ･ You can zoom in/out the Notification panel for some notifications by pinching (P.40) on the Notification panel. ･ Touch and hold a notification on the Notification panel, then tap [App info] to check the application information.
❖Information Home screen ･ You can switch the Home screen of the terminal to "docomo" or "Xperia™". ･ For "docomo" home screen, see "Home screen" (P.84). ･ For changing home application, see "Switching Home application" (P.57). To change the initial home screen for operations, switch the home screen you want to change to, touch and hold the area of the screen where no icons are displayed, then tap . Adding a home screen Up to 7 home screens can be displayed.
Adding a widget to the Home screen Widget is an application which can be added to the Home screen to use. Use a widget and start an application easily. 1 Touch and hold an area of the Home screen where no icons are displayed. ･ 2 When a settings screen appears, follow the onscreen instructions. ❖Information To return to the Home screen, tap y or x, or tap any home screen. ･ For some widgets, displaying size can be changed. To change displaying size, touch and hold a widget, then drag the blue frame.
❖Information To move an icon to a folder, on the Home screen, touch and hold an icon you want to move, drag it over a folder. ･ To change a folder name, tap a folder, tap the folder name and enter a folder name, then tap [Done]. ･ To delete a folder, on the Home screen, touch and hold an icon to delete and drag it to displayed at the bottom of the screen, then tap [Delete]. Applications, shortcuts, etc. in the folder are also deleted.
e Application screen Application screen when the Home screen (P.47) is set to "Xperia™" is explained here. From the Home screen, tap (Application button). 1 ･ bc d e (Sort) To sort application icons displayed in the Application screen, set "Own order" and touch and hold an application icon, then drag it to any position. b (Search) ･ Search for an application in the terminal. c Optional menu icon ･ "Uninstall" (P.54), "Share" (P.55) or "Customize" can be operated.
Movies Play downloaded contents with Video Unlimited or videos that are transferred from a PC to the terminal. On the terminal, you can play videos of a DLNA device or programs that are recorded with a Blu-ray Disc recorder after transferring to the terminal by TV transfer. Sony Select Connect Sony Select to obtain applications, games, etc. Camera Take photos and record video clips. → P.151 Play Store Access to the Google Play, download and buy new applications. → P.
Voice Search Use Google Voice Search. Google+ Activate SNS client application Google+ provided by Google. Messenger Chat with friends using Google+ instant messaging. Gmail Send and receive mails from/to a Google account. → P.123 Talk Chat with friends using Google Talk instant messaging. → P.124 Navigation Display Google Maps Navigation to receive detailed guides for your destination. → P.184 Local Use various information registered on Google Maps, such as shops around the current location. → P.
dmarket An application for activating dmarket. In dmarket, you can buy contents such as music, videos or books. Also, applications on Google Play are introduced. → P.131 ｉ チャネル (i-channel) An application for using i-channel. ｉコンシェル (i-concier) An application for using i-concier. i-concier is a service in which a mobile phone supports your life like a "butler" or "concierge". しゃべってコンシェル (Shabette concier) Speak "what you want to search" or "what you want to do" to the terminal.
遠隔サポート (Remote support) An application for using " スマートフォンあんし ん遠隔サポート (Smartphone Anshin Remote Support)". With " スマートフォンあんしん遠隔サ ポート (Smartphone Anshin Remote Support)", call center staff can provide operational support while checking your terminal screen remotely. OfficeSuite View and read Office documents. → P.192 ❖Information ･ ･ ･ ･ ･ The applications displayed on this application screen are pre-installed by default. Some pre-installed applications can be uninstalled.
Sharing application Introduce an application with simple operation. Send/post an application downloading information (URL) without entering manually. ･ Some applications cannot be shared. Adding a folder to the Application screen You can enter application icons displayed on the Application screen to a folder to manage them. 1 1 2 3 From the Home screen, tap . Tap and [Share]. Tap an application icon with . A selection screen for sharing method appears. ･ An icon with can be shared.
Small apps Task manager You can check the recently-used application and end it. Opening recently-used application window Display recently used applications in thumbnail list and activate. 1 Tap r. ･ Thumbnails of recently used applications are listed. ❖Information Tap a thumbnail of application to activate. Flick left or right a thumbnail of application displayed to delete from the list.
Switching Home application In the terminal, you can switch the Home screen between "docomo" or "Xperia™". "docomo" is set to the home application by default. 1 From the Home screen, tap and tap [Settings]u[Setup guide]. ･ Tap 2 3 Tap [Home screen]/[Set all to]. 4 5 When "ALL" is selected, you can set home application, unlock screen, phonebook application and application for playing videos or music as preferred applications all at once. Tap [docomo]/[Xperia™]. Tap [OK].
Using Google voice typing Privacy and accounts Enter a search word by voice. 1 From the Home screen, tap the Google search widget. 2 Speak a search word to the microphone. ･ on Set whether to display search options from Web history when a search word is entered, or delete a search history for contents or applications in the terminal. ･ You need to create your Google account. * Appears when a Google account is set. Search results appear.
Character entry Enter characters using the software keyboard which appears when you tap the character input box in a mail, phonebook, etc. ❖Information When the software keyboard is displayed, appears on the status bar. ･ To hide software keyboard, tap displayed at the lower left of the screen. ･ Touch and hold a text in the character entry screen to display the enlarged text to check with dragging on the text.
Software keyboard ■ Japanese syllabary keyboard For Japanese keyboard, there are 5 types of software keyboards: phonepad, QWERTY, Japanese syllabary, Kana handwriting and Kanji handwriting input.
■ Kanji handwriting input Changing software keyboard and settings 1 2 Portrait Landscape ❖Information ･ The key display of software keyboard varies depending on the entry screen, character mode or settings. On a character entry screen, touch and hold or tap . Tap / / / / / / / / / . : Display Japanese keyboard settings screen and check/change the settings. ･ : Display the extensions list. ･ : Switch one-byte/two-byte character.
❖Information By default, the phonepad keyboard for portrait screen is set and QWERTY keyboard for landscape screen is set. Also, "Word suggestions", "Auto capitalization", and "Spell check" are set to ON for input support. ･ Tap in Step 2 to change size and location of software keyboard. Drag blue frame to change size. Drag the software keyboard to move to. To restore the software keyboard to the default, tap [Reset].
Icon Function Move the cursor*1 : To the right. Touch and hold to move continuously. Or change the range for conversion. When there is an unfixed character string with the cursor at the right end, tap to enter the same character as the one at the end. Before the conversion is fixed, " 確定 (Fix)" is displayed*2, and fixes the entering characters or conversion characters. When characters are already fixed, enter a line feed at the cursor position. Delete the character before the cursor.
Settings of entry ■ Flick input is available by default. When not using it, you can cancel by the following operations. a On a character entry screen, touch and hold . b Tap . c [On-screen keyboard settings]uUnmark "Flick input" checkbox. ･ To change sensitivity of the flick input, on a character entry screen, touch and hold , tap and [On-screen keyboard settings]u[Sensitivity of flick input], then select "High"/"Medium (default)"/"Low".
･ Multitap text input is available by default. When not using it, you can cancel by the following operations. a On a character entry screen, touch and hold . b Tap . c [On-screen keyboard settings]uUnmark "Multitap text input" checkbox. ❖Information ･ In case of Multitap text input, when the tapped key's highlighter goes off and you can enter a character assigned to the same key consecutively without tapping .
Icon Function / Enter one-byte/two-byte symbols from Touch and the displayed list. Switch the tab to enter hold facemarks from the displayed list (a pictogram tab and deco-mail tab are also displayed when entering in spmode mail). Move the cursor*1 : To the left. Touch and hold to move continuously. Or change the range for conversion. Move the cursor*1 : To the right. Touch and hold to move continuously. Or change the range for conversion.
Selecting an assistant keyboard ■ Widen frequent using key and highlight the key that is predicted for the next entry. When you enter in Hiragana/Kanji input mode using the QWERTY keyboard, you can change the assistant keyboard to make the frequent using keys to be displayed widely for easy tapping. 1 2 3 4 5 ■ On a character entry screen, touch and hold . Tap . Tap [On-screen keyboard settings]u[Choose key type]. Tap any of [Wide]/[Highlight]/ [Dynamic]/[Standard]. Tap [OK].
Changing display keys You can set not to display less-frequent-used keys (Q, X, C, etc.) on the QWERTY keyboard. 1 2 3 2 3 Tap . Tap [On-screen keyboard settings]u[Keyboard customization]. 4 Tap a symbol you want to change and delete character previously set, then enter a character to display and tap [OK]. On a character entry screen, touch and hold . Tap . Tap [On-screen keyboard settings]u[Hide keys]. ･ When the Choose key type (P.67) is set to "Standard", "Hide keys" cannot be selected.
Entering characters on the Japanese syllabary keyboard You can use the software keys arranged according to the Japanese syllabary. Icon / Function Each time you tap, the character mode switches "Hiragana/Kanji" → "Alphanumeric" in order and status icons, → / / / / / appear in the status bar. / Display a pop-up menu.
Icon Function Display the available extensions list. Touch and hold / In alphanumerics input mode, tap to / switch capitalization/upper case/lower case or switch allocated symbol type. In Hiragana/Kanji input mode, highlight and select word in conversion candidates. Tap continuously to change a word highlighted in conversion candidates and select a word to enter. In Hiragana/Kanji input mode, activate Touch and online dictionary to display in conversion candidates.
Icon / Function Each time you tap, the character mode switches "Hiragana/Kanji/alphabets" → "Number" in order and status icons, / appear in the status , etc. → / bar. / Enter one-byte/two-byte symbols from Touch and the displayed list. Switch the tab to enter hold facemarks from the displayed list (a pictogram tab and deco-mail tab are also displayed when entering in spmode mail). Appears before fixing character in Hiragana/Kanji input mode.
*2 In some screens such as the mail account registration screen or search screen, " 次へ (Next)", " 完了 (Done)", " 実行 (Go)", , etc. appear. *3 To set online dictionary, in Hiragana/Kanji input mode, touch and hold , tap [OK] then mark "Online dictionary", or mark "Online dictionary" in the Japanese keyboard setting screen (P.80). ❖Information ･ ･ ･ ･ ･ When you enter character by Kana handwriting for the first time, read a guidance and tap [OK].
Icon Function Enter characters by "docomo voice input" or "Google voice typing". Input candidates list appears. Tap a character string to enter. Display the available extensions list. Touch and hold When any character is entered or after entered character is fixed, a space can be entered. Touch and hold to input spaces continuously. Display direct conversion candidates when entering characters. When entering characters, highlight and select word in conversion candidates.
When entering characters, tap characters. ･ to delete entered Editing text In the character entry screen such as mail, phonebook, etc., double-tap text you want to edit so that text edit menu appears at the top of the screen. Drag or to change the character string to select. (Select all) (Cut) (Copy) (Paste) (Complete) Select all entered text. Cut a selected character string. Copy a selected character string. Paste a copied/cut character string. Close the edit menu.
Setting Xperia™ Japanese keyboard Displaying the setting screen for Xperia™ Japanese keyboard 1 2 From the Home screen, tap , then tap [Settings]u[Language & input]. Tap on "Xperia™ Japanese keyboard". ･ The setting screen for Xperia™ Japanese keyboard appears. ❖Information ･ Alternatively, on a character entry screen, touch and hold or tap and then tap to display the setting screen for Xperia™ Japanese keyboard.
Keeping keyboard type Set to stabilize the last status of keyboard (phonepad/QWERTY/Japanese syllabary keyboard/Kana handwriting input/Kanji handwriting input) in the each portrait/ landscape screen in kana/alphabet/number input mode. 1 On the setting screen for Xperia™ Japanese keyboard, tap [Onscreen keyboard settings]. 2 Mark [Keep keyboard type]. ❖Information ･ You can set to stabilize the last status of keyboard in the each portrait/landscape screen without marking "Keep keyboard type".
Setting voice input Setting Spell check Set voice input to "docomo voice input" or "Google voice typing". Spell check corrects mistyped characters and shows conversion candidates before conversion in one-byte alphabet input mode when entering characters with QWERTY keyboard or Japanese syllabary keyboard. 1 2 On the setting screen for Xperia™ Japanese keyboard, tap [Input support]u[Voice typing]. Tap [docomo voice input]/[Google voice typing]. ❖Information ･ ･ "docomo voice input" is set by default.
Setting keyboard skin You can change software keyboard skin. 1 On the setting screen for Xperia™ Japanese keyboard, tap [Keyboard skin]. 2 Select from keyboards displayed by flicking left or right and tap [Set skin]. ❖Information To download and add keyboard skins from a website, tap [Search for skin] in Step 2. Some keyboard skins downloaded from website may not support the terminal.
Adding an extension You can install extensions to use when entering characters. 1 On the setting screen for Xperia™ Japanese keyboard, tap [Manage extensions]. 2 On the how to start extensions screen, tap [OK]. ･ Extensions settings screen appears. 3 Tap [Download new extensions]. 4 Select an application you want to add. ･ ･ Registering words in user dictionaries There are 2 types of user dictionaries: "My words Japanese" and "My words English".
Words registered to My words English are displayed as conversion candidates when entering alphabet in phonepad/QWERTY/Japanese syllabary/Kana handwriting. During Kanji handwriting input, they are not displayed in the conversion candidates. ･ Up to 50 characters (regardless of one-byte or twobyte characters) can be stored for a "Reading" and "Word", and up to 500 items can be stored in the user dictionary. ･ Added user dictionary can be edited or deleted.
Backing up and restoring dictionary User dictionary and Words by learning can be backed up onto an internal storage and restored when needed. 1 2 3 On the setting screen for Xperia™ Japanese keyboard, tap [Dictionaries] then [Backup & restore]. Tap [Backup]/[Restore]. Mark a dictionary to back up/ restore. ･ Select "My words Japanese"/"My words English"/"Learn words". 4 Tap [Go]. 5 Tap [OK]u[OK].
USB keyboard/Bluetooth keyboard Connect USB keyboard or Bluetooth keyboard that supports HID (Human Interface Device) profile with the terminal to enter characters. ■ 1 Using JIS keyboard Connect a USB keyboard or Bluetooth keyboard and drag the status bar downwards, then tap [Select keyboard layout]. ･ If a notification does not appear on the status bar, from the Home screen, tap and [Settings]u[Language & input]. 2 Tap a name of USB keyboard or Bluetooth keyboard connected to the terminal.
While displaying word suggestions, press "Shift" key/ "Alt" key on the USB keyboard or the Bluetooth keyboard to activate Online dictionary. You need to mark "Online dictionary" checkbox in the Japanese keyboard setting screen beforehand. ･ Current conversion candidate settings (word prediction/direct conversion/alphanumeric conversion/online dictionary) are displayed between character input field and conversion candidate field and selection method for conversion candidate is displayed.
Displaying a list of home screens docomo Palette UI Home screen Tapping y displays Home screen which consists of up to 12 screens you can use flicking left and right. 1 ･ A home screen list appears. ❖Information Touch an hold an area of the Home screen where no icons are displayed and tap [Home screens] to display list of home screens. ･ When the instruction guide for the home screen list appears, tap [Do not show this again]/[OK]. ･ To return to the home screen, pinch-out, or tap y or x.
Change the background of the Home screen or Application screen, or download from website to add (P.89). Wallpaper Select from "Album", "Live Wallpapers", or "Xperia™ wallpapers" to set wallpaper (P.89). Group Add group shortcut of Application screen (P.87). Home screens Display a list of home screens and then add, delete, or sort home screens (P.84). Wallpaper loop Set whether to loop wallpaper on settings the Home screen.
Send your profile or receive a file via infrared. i チャネルウィジェッ Display latest information such as news or weather. ト (i-channel widget) Music Unlimited Display Music Unlimited. NFC Quick Launch Enable/disable NFC Reader/ Writer, P2P function. NOTTV ウィジェット Watch programs, contents, etc. (NOTTV widget) of Mobacas (a broadcasting service for smartphone). OfficeSuite Recent Display OfficeSuite recent History history. Personal area Display personal area.
Adding a folder to the Home screen 1 On "Select an action" menu screen (P.84), tap [Folder]. ･ A folder is added on the Home screen. ❖Information To rename a folder, tap a folder you want to rename and tap the name entry field to enter a folder name, then [ 完了 (Done)] on the software keyboard and then tap on the screen. Alternatively, touch and hold a folder you want to rename and tap [Edit name], then enter a folder name and then tap [OK].
Sorting home screens 1 From the Home screen, pinch-in. 2 Touch and hold a home screen you want to sort. Drag it anywhere. 3 ･ A home screen list appears. Moving an icon on the Home screen 1 2 From the Home screen, touch an icon you want to move. Drag it anywhere. ･ To move to another Home screen, keep touching the icon and drag it to left or right. Deleting an icon from the Home screen 1 2 From the Home screen, touch and hold an icon you want to delete. Tap [Delete].
Changing Kisekae Changing wallpaper 1 On "Select an action" menu screen (P.84), tap [Kisekae]. 1 On "Select an action" menu screen (P.84), tap [Wallpaper]. 2 Flick left or right and tap a Kisekae you want to change to. 2 Tap any of [Album]/[Live Wallpapers]/[Xperia™ wallpapers]. ❖Information When you tap [Album], select an image and set range of the image by dragging or pinching to adjust the cropping frame, and then tap [Crop] to set wallpaper.
g Application screen 1 From the Home screen, tap (Applications button). ･ The Application screen appears. a d e b c f Applications in the group ･ To display/hide applications in all groups, pinchout/in the Application screen. ❖Information When the instruction guide for the Application screen appears, tap [Do not show this again]/[OK]. ･ To close the Application screen, tap x or y. ･ Touch and hold an application icon, then tap [About] to check the application information.
Managing applications Changing the Application screen From the Application screen, you can add or move application icons, or uninstall applications. Adding an application shortcut to the Home screen 1 From the Application screen, touch and hold an icon you want to add to the Home screen. 2 Tap [Add]. ･ The application icon is added onto the Home screen.
Changing group Adding group to the Home screen 1 From the Application screen, touch and hold an icon you want to add to the Home screen. 2 Tap [Add]. ･ Shortcuts to the group is added to the Home screen. ❖Information ･ Touch and hold an area of the Home screen where no icons are displayed and tap [Group] and select a group to add a shortcut. Changing the color of group name 1 From the Application screen, touch and hold a group you want to change the color.
Adding group 1 From the Application screen, tap and tap [Add group]. 2 Enter a group name and tap [OK]. ･ A new group is added. Sorting groups 1 2 From the Application screen, touch and hold a group name you want to sort. Drag it anywhere. ･ The group is moved. ❖Information If a Google account is set, the Google Now screen appears in Step 1 in portrait view. Follow the onscreen instructions. ･ Alternatively, from the Home screen, tap , then tap [Google] to search application.
❖Information If you tap [ おすすめアプリをすべて見る (See all recommended apps)] in Step 3, Browser activates and applications recommended by DOCOMO are displayed in a list. ･ Downloaded applications are displayed in "Download Application" group in the Application screen. ･ Checking Home application information 1 From the Application screen, tap and then tap [Application info]. ･ The home application information appears.
■ Phone Making/Receiving a call 1 Making a call 1 2 From the Home screen, tap , then tap "Dial" tab. Enter the number of the recipient and tap . ･ 3 If a wrong number is entered, tap delete the number. 2 3 ❖Information In Step 2, tap without entering a phone number to enter the phone number registered as the latest call in Recent calls. ･ To activate Xperia™ phone application, from the Home screen, tap , then tap [Dial].
Emergency call When the terminal is within range of the service area, you can make an emergency call of 110 (Police), 119 (Fire and ambulance), or 118 (Japan Coast Guard). 1 From the Home screen, tap then tap "Dial" tab. 2 Enter the number of the emergency call and tap ･ 3 , . If a wrong number is entered, tap delete the number. to When the call is finished, tap [End call]. ❖Note If docomo mini UIM card is not inserted to the terminal, emergency calls (110, 119, 118) cannot be made in Japan.
Making an international call (WORLD ❖Information ･ Even if the screen lock is set, you can answer a call by CALL) For details on WORLD CALL, refer to DOCOMO International Services website. 1 2 From the Home screen, tap , then tap "Dial" tab. Touch and hold [0] key until "+" sign appears. ･ 3 Enter Country codeuArea code (City code)uThe number of the recipient and tap . ･ 4 When making an international call, "+" is replaced by an international access code. If the area code begins with "0", omit "0".
Declining an incoming call and sending a message (SMS) When you cannot answer a call, you can reject the call and send a message (SMS). Message to send is registered in advance, and you can edit it if necessary. Operations during a call Calling screen On the Calling screen, you can set speakerphone or mute, or enter a phone number to make a call to another party. a b g c d e f h i j 1 Drag upwards when receiving a call. 2 Tap a message to send. ･ The message (SMS) is sent to the caller.
h Mute : Turn the microphone on/off during a call. ･ When you switch to the other screen such as the Home screen with Mute on, appears in the status bar. i Dial key : Enter the phone number you want to add to make a call. ･ The ongoing call is automatically on hold. ･ To add a call, "Call waiting" subscription is required (P.101). j Ending a call ❖Note ･ Do not bring the terminal close to your ear with the speakerphone on to avoid from hearing damage.
f Call status icons : Koe-no-Takuhaibin ･ For details on Koe-no-Takuhaibin, refer to "Koeno-Takuhaibin" (P.101) or NTT DOCOMO website. : Caller ID notified : Caller ID hidden ･ It appears when prefix "186" (Notify)/"184" (Not notify) is entered to a phone number to make a call, or when you enter a phone number and tap , then tap [Caller ID notification]uTap [Notify]/ [Not notify] to make a call.
Displaying missed calls When you have missed calls, the status bar. 1 2 appears in Drag the status bar downwards. Tap [Missed call]. ･ Recent calls screen appears. ❖Information For 1 missed call, drag the status bar, "Call back" and "Message" are displayed below "Missed call". Tap [Call back] to make a call to the party of the missed call, or tap [Message] to compose message (SMS) to send to the party. "Call back" and "Message" may not appear depending on notifications in the Notification panel.
Request number notification for calls without phone number with guidance. Set action for a second call. Notify incoming calls by message (SMS) while the power is off or you are out of service area. English Switch the voice guidance guidance to English or Japanese. Remote Set to operate Voice Mail operation Service or Call settings forwarding Service using land-line phone, public phone or DOCOMO mobile phone, etc. Roaming Set to reject incoming calls overseas or settings use roaming guidance (P.254).
Phonebook On the phonebook, you can enter various information for contacts, for example, phone numbers, mail addresses and various service accounts. Phonebook list screen On the phonebook list screen, you can view details of your contacts. You can add a picture to a phonebook entry, and display phonebook entries by group. g h a Displaying phonebook 1 b From the Home screen, tap , then tap [docomo phonebook]u"Contacts" tab. ･ d The phonebook list screen appears.
j My profile tab ･ Check your own phone number. k Index character area ･ Tap index character to display phonebook entries allocated to the index character. l Index ･ Display the index character to search entries in the order of Japanese syllabary, alphabet, etc. m Search Managing phonebook Adding a new phonebook entry 1 On the phonebook list screen (P.103), tap [Register]. ･ 2 On the Edit profile screen, enter required items. ･ 3 When you set a Google account etc.
Using phonebook shortcuts When you tap the photo (image) part on the phonebook list screen (P.103), shortcuts for phone, mail, etc. appear. Tap the shortcut to make a call, or create and send a mail. Call to registered phone number. Create and send message (SMS). Select Email application to create and send an email. ･ When you set an Email account, is displayed as . ･ On the application selection screen, select "Always" or "Just once" after selecting Email application.
Changing accounts to display Setting group for phonebook entry You can set registered phonebook entries to be displayed in the phonebook list. Set a group from phonebook list screen. 1 2 On the phonebook list screen (P.103), tap , then tap [Others]u[Accounts to display]. Tap [Display all accounts]/ [Customize…]. When you set a Google account etc., you can select docomo account, Google account, etc. as an account to display. ･ Tap [Customize...
❖Information You can edit/delete newly created groups and "Family"/"Friends"/"Company", which are saved by default. To edit a group, touch and hold a group and tap [Edit group], then enter editing content and tap [OK]. To delete a group, touch and hold a group and tap [Delete group]u[OK]. Phonebook entries belonged to the deleted group move to the "No group" tab. ･ For one account, you cannot add a group that has the same name as existing groups.
4 5 Tap [Take photo]/[Select picture]. When you tap [Take photo], select "Camera" or "Picture effect" and then select "Always" or "Just once" to take a photo. For information on how to shoot by "Picture effect", see "Picture effect" (P.170). ･ When you tap [Select picture], select "Album" or "File Commander" and then to select "Always" or "Just once" to select a picture. ･ Set image range to be displayed, and then tap [Crop]. ･ 6 Drag or pinch to adjust cropping area to set image range. Tap [Save].
3 Checking My profile and editing information Tap the phonebook entry to combine. ❖Information ･ To cancel binding, on the profile screen of a phonebook entry you want to separate, tap tap [Join/Separate]u[Separate]. 1 On the phonebook list screen (P.103), tap "My profile" tab. 2 3 Tap [Edit]. On the My profile screen, enter necessary information such as name. , then Deleting a phonebook entry 1 On the phonebook list screen (P.103), tap , then tap [Delete].
Sending phonebook entries via infrared communication 1 On the phonebook list screen (P.103), tap , then tap [Others]u[Send via Infrared]. To send an entry, tap [Send one], select entry to send then tap [OK]u[OK]. ･ To send all phonebook entries, tap [Send all] u Tap [Start], enter docomo apps password, tap [OK], then enter the same authentication password as that of the recipient and tap [OK] u [OK] u [OK].
3 Select a sending method and tap [Always]/[Just once]. ･ ■ 1 2 3 After this step, follow the onscreen instructions. Sending My profile On the phonebook list screen (P.103), tap "My profile" tab. Tap and [Share]. Select a sending method. ･ You can export/import phonebook entries from/to a microSD card or docomo mini UIM card. This is useful, for example, when you want to move the contact information to another phone. ❖Information ･ After this step, follow the onscreen instructions.
5 Tap [OK]. Importing phonebook from microSD card ･ Insert a microSD card in advance (P.229). 1 2 3 On the phonebook list screen (P.103), tap , then tap [Others]u[Import/Export]. Tap [Import from SD card]. When you set a Google account etc., you can select that account as an import account. ･ If there is only one vCard file, the file is imported immediately. ･ Insert a docomo mini UIM card in advance (P.30).
Mail/Web browser sp-mode mail Message (SMS) Send/receive mails using DOCOMO mail address (@docomo.ne.jp). You can use pictogram and Deco-mail. Mails can be received automatically. For details on sp-mode mail, refer to "Mobile Phone User’s Guide [sp-mode]". 1 From the Home screen, tap ･ . After this step, follow the instructions on the screen. ❖Information ･ sp-mode mail data can be backed up in a microSD card using " ドコモバックアップ (docomo backup)" app.
･ 5 When the number of entered characters comes close to a limit, a number of enterable characters appears on the upper left of the text box. Receiving and reading message (SMS) 1 From the Home screen, tap then tap [Messaging]. ･ Tap [Send]. ❖Information For the character entry, see "Character entry" (P.59). You can also send/receive text messages to/from customers of overseas network operators.
Saving phone number of message (SMS) to phonebook 1 2 3 From the Home screen, tap , then tap [Messaging]. Tap of phone number to save and tap [Save]. Tap [Register new] or a phonebook to add. ･ 4 When you set Google account etc., tap [Register new] to select the account as a saving location. Enter required items and tap [Save]. ❖Information ･ For a sender registered to the phonebook, tap or photo (image) in Step 2 to make a call or display the phonebook entry.
Deleting a message (SMS) 1 From the Home screen, tap then tap [Messaging]. 2 Tap a sender/recipient whose messages (SMS) you want to delete. 3 Touch and hold a message (SMS) you want to delete. 4 Tap [Delete message]u[Delete]. ❖Information To delete several messages (SMS), in Step 3, tap , tap [Delete messages], and mark messages (SMS) you want to delete, then tap and tap [Delete]. ･ To delete all messages (SMS), in Step 3, tap and [Delete messages]u[X selected]u[Mark all], then tap and [Delete].
5 Email You can create an email account provided by mopera U mail, a POP3 or IMAP compatible email account provided by general ISP (provider), or an Exchange ActiveSync account to send or receive email. You can set multiple Email accounts. Making initial setting for Email Set an Email account following the onscreen instructions. For mopera U mail setting procedure, see "Using mopera U Mail" (P.122). 1 From the Home screen, tap then tap [Email]. 2 Enter your email address and password. Tap [Next].
To enter multiple email addresses directly, separate with a comma (,) and then enter the next email address. ･ To add Cc or Bcc recipients, tap and tap [Show Cc/Bcc]. ･ 4 5 Enter a subject and message. Tap (Send). Receiving and reading email 1 ❖Information ･ To attach a file, while creating an email, tap attach a file in the following step. and Add Select a file from the saved image file list picture to attach it. Take photo Start the camera to take a photo and attach it.
In the Inbox or the email message screen, tap to add star and the email is added to "Starred" folder. To check starred emails in a list, in the Inbox, [Inbox]u[Show all folders]uTap [Starred]. ･ To add star to multiple emails, in the Inbox, mark emails you want to add stars, then tap at the bottom right of the screen. ･ Saving attachment file of email 1 From the Home screen, tap then tap [Email]. 2 Tap email with attached files and tap .
❖Information When you reply or forward an email, the original message contents for replying or forwarding is quoted. To delete the quoted message text, unmark "Include original text". ･ When you forward an email, the attachment file of the original message is quoted. To cancel quoting attached file, tap . ･ Deleting email 1 From the Home screen, tap then tap [Email]. 2 3 Tap an email to delete. Tap and [Delete].
Incoming Set mail server for receiving. settings Outgoing Set mail server for sending. settings Delete account Delete Email account. *1 Appears when Gmail account (@gmail.com) is set. *2 While the silent mode (mute) is set, the terminal does not vibrate when receiving an email. Setting another Email account 1 From the Home screen, tap then tap [Email]. 2 3 Tap [Inbox]u[Add account]. Enter your email address and password. ･ ❖Information The items vary depending on the account type.
❖Information ■ If you need to make the settings manually, contact your email service provider or system administrator for the correct email account settings. ･ If you set an Exchange ActiveSync account as an email account, and if server manager sets Remote wipe, the data saved in the terminal may be deleted. ･ Tap [Inbox] to display a list of set accounts. Tap [Combined view] to display combined Inbox for all accounts. 1 ･ POP mail From the Home screen, tap then tap [Email].
7 Enter "mail.mopera.net" for the SMTP server and confirm the entry of "User name" and "Password" for mopera U. If you tap [Next] in Step 2, you need to mark "Require sign–in" to check entered "User name", "Password" for mopera U. ･ If you tap [Next] in Step 2, "mail.mopera.net" is entered in the SMTP server field. Set "587" in the Port field. ･ 8 9 Tap [Next]. On the account setting screen, set Inbox check frequency, etc. and tap [Next].
5 Tap (Send). Google Talk ❖Information To attach a picture or a video, tap and then tap [Attach picture]/[Attach video] and select a video to attach. ･ Refreshing Gmail 1 From the Home screen, tap then tap [Gmail]. 2 On the Inbox tray, tap ･ You can use Google Talk instant messaging to chat with friends. To use Google Talk, you need to make settings of your Google account. For details, refer to "Setting Google account" (P.222). , .
Early Warning "Area Mail" It is a service with which you can receive earthquake early warning, etc. delivered by the Meteorological Agency. ･ Area Mail is a free service for which subscription is not required. ･ Area Mail cannot be received in the following case.
❖Information If savable amount of Area Mail exceeds the limit of maximum, the oldest one is deleted in order. ･ Setting Early Warning "Area Mail" 1 From the Home screen, tap then tap [Disaster kit]. 2 3 Tap [Early Warning "Area Mail"]. Tap Receive setting Beep tone Web browser You can view web pages using web browser like on a PC. Web browser can be used via packet communication or Wi-Fi network. , and then [Settings]. Set whether to receive Area Mail.
3 Tap the displayed candidates list or [Go] on the software keyboard. ･ In Step 2, you can tap in the address entry field to enter search words by voice and search a web page. Going back to the previous page 1 Tap x. Adding a new tab Open multiple tabs and view web pages. 1 On the Browser screen, tap . ･ and A new tab opens in the default home page. Opening new incognito tab You can view web pages without browser history or search history. 1 On the Browser screen, tap .
Zooming in/out a web page 1 Copying text in a web page Pinch-in/-out on the Browser screen. ❖Information Alternatively, double-tap the browser screen to zoom in. ･ Web pages created to fit to the screen cannot be zoomed in/out. ･ 1 On the Browser screen, touch and hold text you want to copy. 2 Drag or to select a range of text to copy. ･ 3 4 Touch and hold the entry field on the pasting location, and tap [PASTE]. Searching text in a web page 1 On the Browser screen, tap tap [Find on page].
Setting a home page Set home page for opening new tab. 1 On the Browser screen, tap , then tap [Settings]u[General]. 2 Tap [Set homepage] to select an item you want to set as home page. Operating links 1 2 Open the web page you want to operate the links. Tap a link. ･ Link is highlighted and move to linked web page. Managing bookmarks and history You can check history, save bookmarks, etc. Bookmarking a web page 1 2 3 On the Browser screen, display the web page you want to bookmark.
Opening a bookmark Clearing history 1 On the Browser screen, tap [Bookmarks]. and 2 Tap the bookmark you want to open. 1 On the Browser screen, tap and tap [Bookmarks]u"History" tab. 2 Tap a time when you viewed, touch and hold a history you want to delete, then tap [Remove from history]. ❖Information ･ Touch and hold a bookmark to edit or delete it. Checking history 1 On the Browser screen, tap and tap [Bookmarks]u"History" tab.
Apps dmenu In dmenu, you can easily access sites recommended by DOCOMO or convenient applications. Opening dmenu 1 From the Home screen, tap [dmenu]. ･ dmarket You can obtain useful and interesting contents which meet your needs at dmarket. Opening dmarket 1 ･ Browser activates to display "dmenu". When you activate for the first time, "d マーケットソフトウェア使用許諾契約書 (License Agreement)" appears. Mark "Agree" and tap [Start use].
Play Store With Google Play, you can directly access useful applications or fun games which you can download and install on the terminal. And you can send feedback and comments about an application, or report objectionable application or incompatible application with the terminal as an inappropriate content. ･ To use Google Play, you need to set a Google account (P.222). ･ Some applications and games are free of charge, and the others are paid.
Deleting application 1 From the Home screen, tap [Play Store]. 2 3 Tap and [My apps]. Tap the applications you want to delete, then tap [Uninstall]u[OK]. ･ When you uninstall charged applications, a screen for refund may appear. For details, refer to "Help" (P.133). Help When you need help or have any questions about Google Play, display the Google Play screen, then tap and tap [Help] to open Google Play help page.
iC transfer service The iC transfer service is a service which helps you transfer all data in the IC card for OsaifuKeitai to your new Osaifu-Keitai when you change Osaifu-Keitai for changing of the model or repair. Data in the docomo mini UIM card remains the same after using the iC transfer service. Visit a sales outlet such as docomo Shop to use the iC transfer service. For details on iC transfer service, refer to "Mobile Phone User’s Guide [sp-mode]".
Using " おサイフケータイ対応サー ビス (Osaifu-Keitai compatible service)" Using " かざしてリンク対応サービ ス (Kazashite-Link compatible service)" 1 From the Home screen, tap then tap [Osaifu-Keitai]. 1 From the Home screen, tap , then tap [Settings]u[More...]. 2 Select a service you want to use from a service list. 2 [NFC/Osaifu-Keitai settings]u[Reader/Writer, P2P]u[OK]. Download an application compatible with service site or service.
Notes on holding the mark over the other device such as a reader or device with the NFC module Locking Osaifu-Keitai function Use "NFC/Osaifu-Keitai lock" settings to restrict the use of Osaifu-Keitai function and related services. ･ NFC/Osaifu-Keitai lock is different from screen lock for the terminal, SIM card lock. 1 2 When holding mark over the other device, make sure not to hit the terminal strongly. ･ Hold the mark over parallel to the center of the other device.
If you forget the password for "NFC/Osaifu-Keitai lock", tap in the "NFC/Osaifu-Keitai settings" screen and tap [Forget password?], then answer the secret question that you set when setting the password. ･ When unlocking "NFC/Osaifu-Keitai lock", insert the same docomo mini UIM card as the one inserted when "NFC/Osaifu-Keitai lock" was set, then unlock.
･ ･ ･ ･ ･ ･ ･ ･ Some ToruCa which can be displayed in a map from ToruCa (details) may not be displayed in a map from the ToruCa list depending on the IP settings. While "NFC/Osaifu-Keitai lock" is set, you cannot obtain ToruCa with an IC card reader. If you mark 重複チェック (Duplication check), obtaining the same ToruCa redundantly is not available. To obtain the same ToruCa redundantly, unmark 重複チェック (Duplication check).
Broadcast wave and service area Mobacas/1Seg antenna The radio wave received via Mobacas differs from that of received via Xi/FOMA service and 1Seg. For this reason, the signal cannot be received at places where the Mobacas broadcast does not reach or while broadcasting is out of service, regardless of whether the terminal is outside or inside the Xi/FOMA service area.
Improving reception status ･ Fully extending the Mobacas/1Seg antenna and changing the antenna direction or moving to other location may improve signal reception. Watching Mobacas From the Home screen, tap [NOTTV]. and A home screen of NOTTV appears. When you activate for the first time, a terms for use appears. Tap [ 同意する (Agree)] to perform initial settings automatically. Perform the initial settings in a place with good communication environment. ･ When a guidance etc.
❖Information Searching by conditions 1 From the Home screen, tap [NOTTV]. 2 Tap and tap [ 検索・ジャンル別 (Search/by genre)]. Enter a keyword to search or tap a genre you want to search for. 3 and Reserving receiving a program/ content (Shift Time) 1 From the Home screen, tap [NOTTV]. 2 Tap [ 番組表 (Program guide)]u[ シフ トタイム (Shift Time)]. ･ 3 4 ･ ･ ･ and ･ ･ A list of programs/contents to be broadcasted appears. Tap a program/content you want to reserve.
自動処理 Settings Mobacas (Auto process) You can set for view, audio, content reception, etc. 1 2 From the Home screen, tap [NOTTV]. Tap and [Settings]. 表示・音声 字幕表示 (Display (Display/ audio) and Set display subtitles. subtitles) 文字スーパー表示 (Telop display) 音声 (Audio) Set the telop display to on/off. Switch main/sub audio sound. Set the automatic reception of content or program guide to on/off. おすすめのリセット Reset recommendation.
Cookie ブラウザ (Browser) Cookie を削除 (Clear Cookie) Set Cookie to on/off. Delete saved Cookie. Delete received broadcast data in (Delete saved the saving area. broadcast data) Enable/disable データ放送表示 (Display data display of data broadcasting) broadcasting. 再読込 (Reloading) Reload data. Convert character 文字コード変換 (Character code codes. conversion) Display history. 履歴 (History) Set whether to ステータス 放送中番組を表示 (Display display a バー broadcasting (Status broadcasting program) program on the bar) status bar.
For viewing "Data broadcasting site", etc., packet communication fees are charged. ･ Some sites require information fees. ･ ToruCa may be automatically saved while watching 1Seg program. For acquiring detailed information of saved ToruCa, packet communication charge is applied. Airwaves 1Seg is one of the broadcast services and a different type of radio waves (airwaves) from that of FOMA service is received.
Watching 1Seg program 1 From the Home screen, tap tap [1Seg]. ･ ■ and 1Seg watching screen appears. Tap an image or subtitle to temporarily view information such as program name. 1Seg watching screen e f a b g c e f g Reception signal level View optional menu Data broadcasting : Display data broadcasting content. h Remote control for data broadcasting : Display operation keys for data broadcasting such as Back, Move focus, Select focus, etc.
It may take a time to acquire image data or broadcasted data when you activate 1Seg or change channels due to characteristic of digital broadcasting. ･ According to the airwave condition, image or sound may be interrupted or stopped. ･ If the terminal receives a call while watching 1Seg, 1Seg is interrupted and resumes after the call ends. Recorded programs Watching data broadcasting Settings ･ For data broadcasting, you can view various information by following the onscreen instructions.
Saving channels in the current location Available channels vary depending on the area (broadcasting service area) you are using in. 1 On the 1Seg watching screen (P.145), tap . 2 Tap [Settings]u[Change area]u[Empty]. 3 Tap [Auto]. 4 ･ The terminal searches for available channels. When the searching is complete, a channel list appears. ･ By touching and holding the area registered in Step 3, you can display details, set area information, refresh channels, rename area or clear settings.
Using TV link Viewing/Deleting details of TV link For some data broadcasting programs, link information to related websites (TV link) is displayed. Save TV links to connect to related websites later. 1 On the 1Seg watching screen (P.145), tap . 2 Tap [TV Link] and touch and hold a TV link. Saving TV links Property 1 On the 1Seg watching screen (with data broadcasting) (P.145), select TV link to store. ･ After this step, follow the onscreen instructions.
❖Information Alternatively, tap [From Program guide] in Step 3, you can reserve recording/watching. ･ Recording 1Seg Record images, sound, captions or data broadcasting while displaying. 1 On the 1Seg watching screen (P.145), tap to start recording. 2 On the 1Seg watching screen (P.145), tap to end recording. ❖Information Maximum savable recorded data file size is 2GB, and maximum recordable time is approximately 640 minutes in a row. Items can be saved up to 99.
❖Information FM radio Searching and registering channels 1 Connect an earphone set or headphone to the terminal. 2 From the Home screen, tap then tap [FM radio]. ･ ■ Tap 4 5 Tap . Enter a name, select a color, then tap [Save]. ･ 6 efg a FM radio screen appears and selecting channel starts automatically. The search ends when radio waves are received. / i c d to select channel. The frequency bands of selected channels are registered to Favorites. .
h i j k Monaural/stereo effect Broadcasting station now listening Search channels to the right Channel assigned to favorite Camera Switching the speaker and handsfree device 1 On the FM radio screen, tap . ･ / The sound output is switched to the speaker/handsfree device. Using earphone set Use a commercially available earphone set, stereo earphone with microphone or headphone connecting to the terminal. 1 Connect an earphone set or headphone to the headset jack of the terminal.
･ Avoid copyright infringements when you handle photos, videos, or sound recorded using the terminal, e.g. copy/edit. In addition, avoid rights infringements of portraits by using these photos without consent, altering them or by other means. Note that capturing or recording a stage performance, entertainment or exhibition may be prohibited even if for personal use.
･ In the following cases, Sweep Panorama shooting may be interrupted.
Picture effect Apply various picture effects to pictures (P.170). Sweep Panorama Shoot panoramic image with wide angle (P.171). Scene selection Set programmed scenes (P.156). Front camera Shoot pictures using the front camera (P.168). Front video Record videos using the front camera (P.168). Changing capturing mode 1 Press and hold k for over a second. ･ 2 The shooting screen (P.153) appears. On the shooting screen, tap the capturing mode icon (P.154), then select capturing mode.
■ Shooting with the shutter icon Tap on the shooting/recording screen. ･ To shoot still pictures using auto-focus function, touch and hold and release your finger when the focus frame turns blue and sound beeps. A picture is shot as soon as you release the finger. If the focus frame does not appear, autofocus does not operate correctly. ■ Shooting with "Touch capture" Set "Touch capture", then tap around a displayed frame on the shooting screen.
3 Tap an option in the selected setting. ･ If you change setting options, icons displayed on the shooting screen change to the set items. ❖Information To replace setting item icons displayed on the shooting screen, tap on the shooting screen and touch and hold a setting item and drag it to a dotted frame. ･ To delete a setting item icon displayed on the shooting screen, touch and hold an icon and drag it to displayed in the center of the screen. ･ When capturing mode (P.
Beach Reconstruct beach scene brightly and vividly. Snow Reconstruct snow scene brightly and vividly. Party Shoot an indoor picture creating good atmosphere of indoor lighting. Due to long exposure time, be careful not to shake camera. Sports To shoot fast-moving object, shorten exposure time to minimize motion blurring. Document Use for shooting text or graphics. It allows to capture a clear, bright, and easy to read text. Fireworks Shoot a crisp and clear images of fireworks.
■ Flash Set the flash to light or not when lighting conditions are poor or in backlight. Auto Turn on the flash automatically according to the brightness. Fill flash Always turn on the flash regardless of the brightness. Red-eye reduction Reduce red-eye effect caused by the flash. Off The flash does not turn on. ･ Sometimes still picture quality can be better without flash. When you do not turn on the flash, use the self-timer to avoid blurring still picture.
Off Do not use Quick launch. ■ Exposure value Adjusting brightness with exposure value. The setting is available only when the capturing mode (P.154) is set to "Normal". Exposure value Drag the bar to adjust the exposure value. HDR Set the high dynamic range function. On Shoot with the high dynamic range imaging function. Off Cancel the high dynamic range function. Focus mode Set focus controls. The setting is available only when the capturing mode (P.154) is set to "Normal".
■ ISO Set ISO sensitivity. Shoot clear picture reducing blur even in a place where lightning is poor. The setting is available only when the capturing mode (P.154) is set to "Normal". Auto Set to the appropriate sensitivity from "100" to "1600". 100 Set sensitivity to 100. 200 Set sensitivity to 200. 400 Set sensitivity to 400. 800 Set sensitivity to 800. 1600 Set sensitivity to 1600. ■ Metering Measure the brightness on the shooting screen to determine a well-balanced exposure automatically.
■ Geotagging Tag photos location information (geotag) for the shooting spot. Enable the location information service setting to add Geotag. For details on location information service, see "Location services" (P.180). On Geotag (location information) is added to specify the shooting spot of the photo. Off Shooting location cannot be viewed on a map. ･ appears while acquiring location information. To pictures shot while acquiring location information, geotags are not added.
■ Shooting direction Set shooting direction for Sweep Panorama. The setting is available only when the capturing mode (P.154) is set to "Sweep Panorama". Right Shoot moving the camera from left to right. Left Shoot moving the camera from right to left. Down Shoot moving the camera downward. Up Shoot moving the camera upward. ■ Burst speed Set continuous shooting speed. The setting is available only when the capturing mode (P.154) is set to "Burst".
■ Shooting with "Touch capture" Set "Touch capture", then tap around a displayed frame on the recording screen to start recording, and tap the recording screen to stop recording. ･ To set "Touch capture", on the recording screen, tap , then tap [Touch capture]u[On]. Changing the recording settings 1 2 ■ Using the camera key (k) On the recording screen, tap k to start recording, and tap k to stop recording. ･ Even when "Touch capture" (P.167) is set to "On", pressing k starts/stops recording a video.
To delete a setting item icon displayed on the shooting screen, touch and hold an icon and drag it to displayed in the center of the screen. ･ or capturing mode icons (P.154) displayed on the recording screen cannot be moved or deleted. Party Shoot an indoor picture creating good atmosphere of indoor lighting. ･ Video camera setting ■ Scenes Use Scenes to quickly set up the camera for various scene conditions. Off Adjust color shade or brightness automatically.
■ Photo light ■ Use the photo light to shoot when lighting conditions are poor or in backlight. On The photo light turns on. Off The photo light does not turn on. Sometimes the video quality can be better without a photo light, even if lighting conditions are poor. Recording a good video without using the photo light requires a steady hand. ■ Set behavior when using Quick launch (P.168). Launch and capture Activate the camera to shoot a picture immediately.
■ Exposure value ■ Adjust brightness with Exposure value. Exposure value Drag the bar to adjust the exposure value. ■ Measure the brightness on the shooting screen to determine a well-balanced exposure automatically. Center Put emphasis at the center of the shooting screen and measure photometry at whole view finder to adjust the exposure. Average Adjust the exposure based on the brightness of the whole shooting screen.
■ Geotagging ■ Tag videos location information (geotag) for the recording spot. Enable the location information service setting to add Geotag. For details on location information service, see "Location services" (P.180). On Geotag (location information) is added to specify the recording spot of the video. Off Recording location cannot be viewed on a map. ■ Microphone Set whether to pick up the surrounding sound when recording videos. On Pick up the surrounding sound when recording videos.
Front camera For using Front video camera, "Video resolution", "Self-timer", "Geotagging", "Microphone", "Touch capture", "Data storage" can be set. Other "Video camera setting" (P.164) are not supported by Front video camera. - Some settings take over the camera settings set at the time when switching. ･ Front camera allows you to shoot your own picture or video while watching the shooting screen. 1 Press and hold k for over a second. ･ 2 3 Tap on the shooting/recording screen. Shoot photo/video.
Face detection Use Face detection to focus on a face located away from the center. The camera detects up to 5 faces and selects 1 face for auto focus. The camera determines the most suitable face according to the balance of distance from the camera and from the center. A selected face is surrounded with a yellow frame and automatically focused on. You can select a face to focus on by tapping a frame. Setting face detection 1 Press and hold k for over a second. ･ The shooting screen (P.153) appears.
Setting smile shutter 1 Picture effect Press and hold k for over a second. ･ The shooting screen (P.153) appears. 2 On the shooting screen, tap then tap [Smile Shutter]. 3 Select smile level for the smile shutter. , Taking a photo using smile shutter 1 Set smile shutter, and point the camera at the object. Each detected face is framed (up to 5 faces). ･ The camera selects which face to focus on. A yellow frame shows the face in focus.
2 Press k. Alternatively, tap the shutter icon to shoot. ･ Shot pictures are automatically saved in the internal storage or a microSD card. ･ ❖Information Shooting Sweep Panorama 1 Set Sweep Panorama, point the camera at the object. 2 Shoot a still picture. 3 Aligning the white frame with the black frame, slowly move the camera from left to right. When you shoot a picture using picture effect, "Touch capture" (P.155) is not available.
2 On the shooting screen, tap the capturing mode icon (P.154), then tap [Burst]. ･ Tap / to set "Burst speed" (P.162) or "Photo light" (P.161). Shooting continuously 1 2 Set Burst and point the camera to an object. Press and hold k for over a second. Pictures are continuously shot while k is pressed. ･ Alternatively, touch and hold the shutter icon to operate. Pictures are continuously shot while the shutter icon is touched and held.
Copyright protected content Avoid copyright infringements when you handle photos, videos, or sound recorded using the terminal, e.g. copy/edit. In addition, avoid rights infringements of portraits by using these photos without consent, altering them or by other means. Note that capturing or recording a stage performance, entertainment or exhibition may be prohibited even if for personal use.
■ Album screen ■ Still picture viewing screen bc b cde a a f a Pictures tab ･ Pictures are displayed in a list of chronological order. Pinch-out/in on the screen to zoom in/out image. b My albums tab ･ You can view albums in a list. You can view images with Geotagging attached on a map, saved images, pictures shot by the camera, albums synchronized on an online service, and images on a device registered in the Media server.
Operating image files Sharing image files You can share image files by attaching to Gmail or Email, uploading to Picasa or Google+, or sending to other devices via Bluetooth or infrared communication. 1 On the picture viewing screen/ video playing screen, tap the screen and tap . ･ ･ 2 Menu for sharing image file appears. Tap [See all] to display all share menus. Select sharing method for image file. ･ After this step, follow the onscreen instructions.
❖Information Different options may be shown or some items cannot be operated in some image files. ･ In Step 2, tap "Throw" to display the connection device selection screen (if no devices are found, tap [Add new device] to make the setting). Select a device on the connection device selection screen to share files between a DLNA device, Bluetooth device, or screen mirroring device and the terminal. ･ YouTube YouTube is a free online video streaming service. You can play, search for and upload videos.
❖Information Media Player Activating Media Player 1 From the Home screen, tap then tap [Media Player]. ･ ■ To change the order of tab icons, tap and tap [Settings]u[Arrange icons], drag up and down on the item to change then tap [Apply]. ･ Play back music and videos stored on the internal storage or a microSD card using Media Player. ･ For information on how to copy music and video data from a PC, see "Connecting to a PC with microUSB cable" (P.241).
h i Shuffle OFF/Shuffle ON Volume control ･ Alternatively, press m during playback to adjust volume. ❖Information ･ Video playback screen a b d Playlist You can play back songs in the order you decided using playlist. 1 From the Home screen, tap then tap [Media Player]. 2 Flick left and right on tabs at the bottom of the screen and tap [Play list]. e f g a b While in landscape view, tap the screen to display option menu icons etc.
Editing songs in playlist 1 On the play list screen, select a playlist to edit and tap [Edit]. ■ Changing order of the songs Drag up and down in song to change order and tap [Save]u[OK]. Socialife Socialife is an application with which you can view or manage SNS such as Facebook, Twitter, etc. or news websites etc. collectively. ･ To use Socialife, an account for Facebook or Sony Entertainment Network is needed. ■ Deleting songs from playlist Select a song to delete and tap [Save]u[OK].
Location services Your current location can be positioned using GPS, Wi-Fi, or mobile network. If you use GPS technology it may take a little longer, but it will find your position with high precision. If you use Wi-Fi or mobile network, your position is found shortly but accuracy may decrease. Use GPS, Wi-Fi, and mobile network in combination to quickly find your position with high precision. GPS function The terminal has a GPS receiver that uses satellite signals to calculate your location.
Some wireless communications products (mobile phone, data detectors and some others) block satellite signals and also causes instability of signal reception. ･ Some map displays based on location information (latitude/longitude information) may be not accurate due to some countries' or regions' regulations.
Your location information is sent to Google without specifying who you are. Your location information may be sent even when the application is not running. ･ "GPS satellites" and "Google's location service" can be set individually. ･ ■ Using Google Maps The Google Maps application allows you to view your current location, find other locations and search routes.
1 On the map screen, tap . The blinking blue mark shows the current location. ･ If you tap , the terminal's geomagnetic compass links the direction displayed on the map. ･ Searching for a location you want to look at 1 2 On the map screen, tap Fill out the search bar. 3 Tap 4 Tap a destination. Zooming in/out on a map 1 Pinch-in/-out on the Maps screen. ❖Information ･ ･ Alternatively, double-tap the screen to zoom in. Tapping the screen with 2 fingers also zooms out.
Changing the layers ･ You can select information to overlay on the map. 1 2 On the map screen, tap . Tap information to display. ･ Traffic information and routes are not available in all locations. Traffic Satellite Terrain Transit Lines Latitude My Maps Wikipedia Show traffic condition. Display satellite photo. Display geological formation. Show route information. Join Latitude. View My Maps that you create on a PC. Only viewing : You cannot create My Maps on the terminal. Display .
Checking where a friend is by Google Latitude Google Latitude enables you to share location information with your friends on the map. You need to set up a Google account (P.222) and join Latitude and invite a friend who gives his or her location information, or to receive an invitation from him or her. Joining Latitude You need to turn on the location information service setting beforehand. For details, see "Activating GPS/Location services" (P.181). 1 On the map screen, tap [Maps] u[Latitude].
Creating a schedule in Calendar 1 2 3 Tap on the calendar screen. Enter a name, date and time, location, and description for event. Tap [Done]. ❖Information When you set a Google account, you can select an account to create schedule to in Step 2. ･ Tap beside "Add reminder" to add a new notification. ･ Tap in "More" and flick up the screen to set "Repetition", "Attendees", "Time zone", "Show me as:", and "Privacy". ･ If you log in to Facebook, tap [Sync Calendar] in "Xperia™ with Facebook" (P.
Canceling reminder or setting snooze When scheduled time arrives, the status bar. 1 2 appears on Drag the status bar downwards. Tap [Snooze]/[Dismiss]. ･ Alarm & clock With "Alarm & clock" app, you can set an alarm and use world clock, stopwatch and timer. 1 From the Home screen, tap then [Alarm & clock]. , ･ Alarm screen appears. Tap [Snooze] to show pop-up menu and select snooze interval. After set ■ Alarm screen time elapses, notification appears again.
Setting alarm 1 On the alarm screen, tap [Add alarm]. 2 Set time etc. and tap [Done]. ･ Tap [Advanced alarm settings] to view all setting items. Flick up and down on numbers to set time. Repeat Set a day of the week for the alarm. Alarm sound* Set alarm sound. Snooze duration Set time interval to sound the ringtone again after stopping the ringtone. Alarm text Enter texts that appear while alarm is sounding.
■ Sorting Using World clock Tap [Rearrange] and drag up and down beside added cities, then tap [Done]. Display the date and time in cities around the world. 1 ･ 2 3 ■ Deleting Tap [Delete] and mark cities you want to delete, then tap [Delete]u[Yes]. ･ The number of the marked cities appears on the right of "Delete". ･ Alternatively, on the world clock screen, touch and hold a city you want to delete, then tap [Delete city]u[Yes] to delete. On the alarm screen, tap "World clock" tab.
Using Timer ドコモバックアップ (docomo 1 On the alarm screen, tap "Timer" tab. 2 3 Tap [Set time]. Flick up and down on numbers to adjust the time and then tap [Done]. 4 Tap [Start]. 5 Tap [Stop]. ･ Timer starts, and status bar. appears in the Stop sounding alarm after a set time has elapsed. ･ Tap [Stop] within a set time duration to pause timer. Tap [Start] to resume timer. ･ ❖Information Tap to set time from Timer history. Tap and select an alarm sound, then tap [Done] to change the alarm sound.
Backing up Restoring If microSD card is not installed, data such as images and movies are saved to the internal storage. You can back up only data such as images and movies stored in the internal storage. Data stored in microSD card cannot be backed up. 1 2 From the Home screen, tap then tap [ ドコモバックアップ (docomo backup)]. Tap [Backup]. Mark the data to back up. 5 6 Tap [Start backup]u[OK]. Enter docomo apps password and tap [OK]. ･ 2 Tap [microSD カードへ保存 (save to microSD card)].
Copying phonebook entries registered in Google account to docomo account You can copy contacts data registered in Google account and in the terminal to docomo account. 1 2 From the Home screen, tap then tap [ ドコモバックアップ (docomo backup)]. Tap [microSD カードへ保存 (save to microSD card)]. ･ 3 4 , When you use for the first time, agree to "License agreement". Tap [Phonebook account copy], tap [Select] on Google account contacts you want to copy. Tap [Overwrite]/[Add].
Settings Viewing the setting menu 1 ■ From the Home screen, tap then tap [Settings]. , Setting menu WIRELESS & NETWORKS DEVICE PERSONAL ACCOUNTS SYSTEM P.193 P.205 P.214 P.222 P.225 ❖Information ･ Alternatively, from the Home screen, tap and then tap [Settings], or drag the status bar downwards and tap [Settings] to display the Settings screen. Wireless & networks You can make settings related to networks such as Wi-Fi, Bluetooth function. Wi-Fi Bluetooth Data usage More...
Turn the Wi-Fi function to off when you do not use Wi-Fi to cut battery power consumption. ･ If you start Wi-Fi connection while using Wi-Fi Direct function (P.197) or during Screen mirroring (P.213), Wi-Fi Direct function/Screen mirroring is terminated. streaming data, etc. In these cases, do the following: ･ Keep the terminal and Bluetooth device to be connected wirelessly 10 or more meters away from a wireless LAN device. ･ Within 10 meters, turn off the Bluetooth device to be connected.
･ To connect Wi-Fi network with WPS compatible device, tap , or tap , then tap [WPS Pin Entry]. Follow the onscreen instructions. ■ The following icons appear according to the Wi-Fi network connection status. ❖Information The next time you connect to a Wi-Fi network, the password is saved in the terminal. ･ If you enter a wrong password (security key) when selecting an access point to connect, any of the following appears.
Setting the Wi-Fi open network notification to ON ･ You need to turn on the Wi-Fi setting beforehand (P.194). 1 2 3 From the Settings screen (P.193), tap [Wi-Fi]. Tap and [Advanced]. Mark "Network notification". Scanning for Wi-Fi networks manually ･ Adding a Wi-Fi network manually ･ You need to turn on the Wi-Fi setting beforehand (P.194). 1 2 3 From the Settings screen (P.193), tap [Wi-Fi]. 2 Tap 3 Tap a Wi-Fi network in the list to connect. ･ and [Scan]. Scanning Wi-Fi networks starts.
❖Information ･ In Step 1, tap , then tap [Advanced] to enable/ disable Auto IP support or check "MAC address" and "IP address". Mark "Avoid poor connections" to use LTE/WCDMA/ GSM network mode when Wi-Fi radio waves are weak. Changing Wi-Fi sleep policy You can choose to disable the Wi-Fi function in the terminal when the screen backlight turns off. You can also set the terminal to always turn on the Wi-Fi function or to always turn it on when the terminal is charged. 1 From the Settings screen (P.
Bluetooth Connect Bluetooth device wirelessly using Bluetooth function. For details on Bluetooth communication, see "Using Bluetooth function" (P.235). Setting data usage limit 1 From the Settings screen (P.193), tap [Data usage]. 2 Tap [Set mobile data limit] and read the notes, and then tap [OK]. ･ Data usage Enable/Disable mobile data communication or set data usage limit. ❖Information ･ You can check communication volume for each application. For some applications, the settings can be displayed.
Permitting data roaming 1 From the Settings screen (P.193), tap [Data usage]. 2 Tap and [Data roaming], then read the notes and then tap [OK]. ･ "Data roaming" is marked. Restricting background data 1 From the Settings screen (P.193), tap [Data usage]. 2 Tap and [Restrict background data], then read the notes and then tap [OK]. ･ Airplane mode In this mode, the functions of using radio wave transmissions such as calling, accessing to the Internet (including sending/receiving mails), etc.
Connecting to a VPN (Virtual Private Network) Virtual Private Network (VPN) is a technology to connect to the information in a protected local network from another network. Generally, VPNs are provided to companies, schools and other facilities. A user can access to the information in the local network from outside of the premises. To set up a VPN access from the terminal, you need to retrieve the information related to security from your network administrator. For details, see the following website.
❖Information Alternatively, from the Settings screen (P.193), tap [More...]u[VPN], tap a indication of a connected VPNu[Disconnect] to disconnect VPN. ･ 2 When you connect microUSB cable for the first time, the driver software for the terminal is installed to a PC. Wait for a while until installation is completed. ･ When "PC Companion software" screen appears on the terminal, tap [Skip].
Setting Wi-Fi tethering 1 2 3 From the Settings screen (P.193), tap [More...]u[Tethering & portable hotspot]. Tap [Portable Wi-Fi hotspot]. Confirm "Details", then tap [OK]. ･ "Portable Wi-Fi hotspot" is marked. ❖Information If Wi-Fi tethering starts while connecting to Wi-Fi network, Wi-Fi network is disconnected and automatically connected when Wi-Fi tethering ends.
Setting an access point Setting an access point additionally From the Settings screen (P.193), tap [More...]u[Mobile networks]u[Access Point Names]. Tap and [New APN]. Tap [Name], enter a name and tap [OK]. An access point for connecting to the Internet (sp-mode, mopera U) is already registered. You can add or change it if necessary. By default, sp-mode (P.204) is set for the usual access point. 1 Checking the access point in use 4 Tap [APN] and enter the access point name and tap [OK].
Initializing an access point By initializing an access point, the default state is restored. 1 2 From the Settings screen (P.193), tap [More...]u[Mobile networks]u[Access Point Names]. Tap and tap [Reset to default]. sp-mode sp-mode is ISP for NTT DOCOMO smartphone. In addition to accessing Internet, you can use the mail service using the same address as imode mail (@docomo.ne.jp), etc. sp-mode is a service requiring subscription. For details on spmode, refer to NTT DOCOMO website.
Vibrate on touch Device Call settings You can use the network services and search for available networks. For Call settings, see "Call settings" (P.101). Adjusting each sound volume 1 From the Settings screen (P.193), tap [Sound]u[Volumes]. ･ Sound Set ringtones, operation sound, vibrator, etc. ･ For silent mode, see "Setting silent mode" (P.41).
Adjusting the ringtone volume with the volume key 1 From the Home screen, press up or down of m. ･ Setting vibration when receiving a call 1 The volume adjustment bar appears, you can adjust the volume up or down. From the Settings screen (P.193), tap [Sound] and mark "Vibrate when ringing". ･ ❖Information ･ You can also press m or P to mute the ringtone for an incoming call. Setting a ringtone/notification sound 1 From the Settings screen (P.
Display Set brightness, orientation of the screen, etc. To view photos or movies colorfully and beautifully, set image quality improving procedure (Mobile BRAVIA Engine 2). It adjusts contrast, color shade, etc.* Brightness P.207 White balance P.207 Wallpaper P.89 Auto-rotate screen P.40 Sleep P.208 Font size Set font size. Themes Set an image for the Home screen, unlock screen, etc. Quick settings P.208 Lock screen P.
Adjusting the idle time before the screen turns off 1 From the Settings screen (P.193), tap [Display]u[Sleep]. 2 Select a time option before the screen back light turns off. ❖Information ･ To turn the screen back light off immediately, press P. Editing quick settings on the Notification panel Changing wallpaper of the unlock screen ･ Only when "Set all to" or "Lock screen" in Preferred apps settings (P.214) to "Xperia™", and set the screen unlock method (P.
Check memory volume of internal storage, microSD card, and USB storage. And you can delete data in the microSD card and USB storage and format. USB storage is an external memory such as a microSD card connected to the terminal using commercially available reader/writer cable. INTERNAL STORAGE SD CARD Check available memory space of USB storage. Unmount Cancel connection of USB USB storage to storage* remove it safely. Mount Have USB storage USB recognized. * storage Clear USB P.
Formatting USB storage ･ Insert external memory such as a microSD card into commercially available reader/writer cable and connect the cable to the terminal in advance. 1 From the Settings screen (P.193), tap [Storage]. 2 Tap [Clear USB storage]u[Erase]. 3 Tap [Erase everything]. ･ Enter your screen unlock method as required. ❖Information ･ Formatting USB storage (external memory such as microSD card) deletes all the data in it.
Apps Manage and delete installed applications, display memory usage condition, etc. or change the settings. Viewing permitted operation of the applications in the terminal You can check functions which are permitted to access to each application in the progress of performing, such as network communication function or location information function of the terminal. 1 From the Settings screen (P.193), tap [Apps]. 2 3 Tap an application to view. Flick the screen up to view permitted operations.
Deleting installed application Disabling application Before deleting installed application, back up contents related to the application that you want to save including data saved in the application. ･ Some applications cannot be deleted. You can disable some applications which cannot be uninstalled or services. Disabled applications are not displayed on the Application screen and you cannot execute them, but they are not uninstalled. ･ 1 2 3 4 5 From the Settings screen (P.193), tap [Apps].
Deleting cache of the application 1 From the Settings screen (P.193), tap [Apps]. 2 3 Tap an application to delete cache. Tap [Clear cache]. Deleting settings for activating the application You can delete settings for activating the application and restore to the default. 1 2 3 From the Settings screen (P.193), tap [Apps]. Tap an application to delete its settings. You can reset disabling applications (P.212), settings for activating application (P.213), or restricting background data.
*1 Data with copyright protection cannot displayed. Depending on usage environment, image or sound may be interrupted or stopped. Covering around the Wi-Fi antenna with your hand may affect the quality of communications. If you start Screen mirroring during Wi-Fi connection, Wi-Fi connection is disconnected and switched to packet communication (LTE/WCDMA/ GSM). *2 Connection is available only with a device that supports HDCP.
Location services Encrypt phone Set whether to permit the location information service. Access to my location GPS satellites P.181 Set whether to permit applications to identify your current location using GPS. Google's location Set whether to permit Google to service use location information using result etc. of Google search. Security Set options related to security. Screen lock P.218 Improve face Improve face lock accuracy.
Protecting docomo mini UIM card Some functions provided for convenient use of the terminal require the security code to use them. Besides the security code for locking the terminal, the network security code necessary for the network services etc. are available. Make use of the terminal using an appropriate security code according to the purpose.
PIN code Personal Unblocking Key (PUK code) You can set security code which named PIN code to docomo mini UIM card. It is set "0000" at the subscription. They can be changed by yourself. PIN code is a 4- to 8-digit security number (code) that must be entered for user confirmation to prevent unauthorized use by a third party every time you insert the docomo mini UIM card into the terminal or when the terminal is powered on. Entering the PIN code enables making/receiving calls and terminal operation.
Changing the PIN code ･ You can change only when you activate the SIM card lock. 1 2 3 4 From the Settings screen (P.193), tap [Security]u[Set up SIM card lock]u[Change SIM PIN]. Enter the current PIN code and tap [OK]. Enter a new PIN code and tap [OK]. Enter a new PIN code again and tap [OK]. Unlocking PIN lock 1 2 3 Tap [PUK code] field and enter PUK code. Tap the [New PIN Code] field and enter a new PIN code and tap [OK]. Enter a new PIN code again and tap [OK].
When you tap [PIN], follow the onscreen instructions to enter 4 - 16 digit numbers. This "PIN" code is different from a PIN code to be set to docomo mini UIM card (P.217). ･ When you tap [Password], follow the onscreen instructions to enter 4 - 16 digit characters including alphabets. ･ Changing screen unlock method 1 2 3 From the Settings screen (P.193), tap [Security]u[Screen lock]. Enter the current unlock pattern/ PIN/password. Select a new unlock method.
❖Information Tap [Try again] to retry entering pattern in 30 seconds. ･ When you tap [Try again]u[Forgot pattern?], "Security question" screen or "Unlock screen" screen appears. ･ If you set multiple Google accounts, enter one of those accounts and password to unlock the screen. ･ ■ If you set "PIN" or "Password" Please contact a docomo Shop. Canceling screen lock You can cancel screen lock pattern after you set. 1 From the Settings screen (P.193), tap [Security]u[Screen lock].
Changing phone language 1 2 From the Settings screen (P.193), tap [Language & input]u[Language]. Select a language and tap [OK]. ･ When you select Japanese, "OK" is displayed, but its display varies by the language you selected. ❖Information ･ If you choose the wrong language and cannot read the menu texts, see the FAQ of the following website. http://www.sonymobile.co.jp/so-02f/faq.html (In Japanese only) Setting Voice Search Language Select language used for Google voice search.
Resetting the terminal Resetting the terminal deletes all data, including downloaded applications and accounts, and resets the terminal back to the initial (default) state. Make sure to back up important data you have on the terminal before you reset the terminal. For the initial settings, see "Initial settings" (P.38). 1 From the Settings screen (P.193), tap [Backup & reset]u[Factory data reset]u[Reset phone]. Mark "Erase internal storage" to delete all contents (music, photos, videos, etc.
❖Information You can use the terminal without creating your Google account, however the services such as Google Talk, Gmail, Google Play, etc. are not available. ･ To log in, you need a Google account and a password. ･ When you sign in, "Backup and restore" screen may appear. To back up applications, bookmark settings, etc. using a Google account, mark "Keep this phone backed up with my Google Account" and then tap . ･ Tap set Google account and synchronize each data from the following items manually.
■ Setting Xperia™ with Facebook Setting other account Set Facebook account to display in the status bar. Drag the status bar downwards and set "Xperia™ with Facebook" to synchronize functions of applications in the terminal. You can set docomo account, Email, Corporate (Exchange ActiveSync), etc. other than Google account (P.222) or Facebook account (P.223). 1 Drag the status bar downwards and tap [Xperia™ with Facebook]. 2 Tap [Done]. 1 From the Settings screen (P.193), tap [Add account].
Setting Auto-sync Canceling synchronization Synchronize information of online service with the terminal. You can display and edit information on the terminal or a PC. ･ You need to set your online service account (Google account, Facebook account, etc.) in the terminal to synchronize in advance. 1 2 1 2 From the Settings screen (P.193), tap [Data usage]. Tap and [Auto-sync data], then read the notes and then tap [OK]. ･ "Auto-sync data" is marked.
❖Information ･ Correction of the time differences may not be performed correctly depending on the overseas network operator. In that case, set time zone manually (P.226). Setting the date 1 From the Settings screen (P.193), tap [Date & time]u[Set date]. 2 3 Drag number to adjust date. Tap [Done]. Setting the time 1 2 From the Settings screen (P.193), tap [Date & time]u[Set time]. Drag number to adjust hour and minute. ･ 3 When you unmark "Use 24-hour format", drag "am" or "pm" to switch AM/PM.
Touch & hold delay Enhance web accessibility Set response time for operation of touching and holding the screen. Set whether to install script from Google. ❖Information ･ When TalkBack is turned on for the first time, a message asking if touch exploration function feature is enabled appears. Touch exploration is a function that reads or displays an explanation for the item you tapped. When touch exploration feature is enabled, you can operate the terminal in the different way from the usual one.
File management Storage structure Phone (Internal storage) Folders in the internal storage by default are as follows. ･ Displayed folders may differ depending on the terminal operations. Stores setting data for system or each application, temporary files, etc. Notifications Stores notification files used by Google+. Also, stores music data etc. you want to set as notification sound. com.sonyericsson. Stores a part of information of notes "Notes" application.
Install the battery pack and attach the back cover, then make sure that there are no gaps between the terminal and the back cover. When installing/removing the microSD card, make sure to power off the terminal (P.37). Do not attach an AC adapter. ･ For removing/attaching the back cover, see "To ensure waterproofness/dustproofness" (P.24, P.25). 3 Inserting microSD card 1 Hook the groove on the bottom of the terminal with your fingertip and lift up the back cover to remove.
Creating new folder File operations Use "File Commander" application to display or manage various data such as still images, videos, music, etc. saved to the terminal or the microSD card. ❖Information When you activate for the first time, a screen for registering name etc. appears. Select "Register later" or "Register now". When you select [Register later] and register to File Commander later, from the Home screen, tap , then [File Commander]u[Help]u[Register].
Deleting folder or file Searching for data 1 From the Home screen, tap then tap [File Commander]. 2 Select an item, then tap a folder as required. Mark a folder or file you want to delete. 3 4 , 1 From the Home screen, tap then tap [File Commander]. 2 Tap [Find] and enter a folder name or file name. ･ , Search suggestions appear as you enter a character. Tap [Delete]u[OK]. ･ Alternatively, touch and hold a folder or file, then tap [Delete]u[OK].
Data communication Using infrared communication You can send/receive data to/from a device with infrared communication function such as a mobile phone. ･ The communication range for infrared communication is 20 cm or less. Keep the devices pointing at the infrared data port each other, and do not move them until data exchange completes. ･ If the infrared data port is soiled, clean the data port with a dry soft cloth to prevent from scratching.
You can send and receive Phonebook entries, My profile, name card, sp-mode mail, Schedule & memo, still images (.jpeg, .png, .gif, .bmp), videos (.mp4, .3gp) and ToruCa. It may take a time to exchange data depending on the data amount or device of other party. ･ Some data, such as data with copyright protection, etc., cannot be played back on other devices. ･ Received data cannot be played back or saved depending on the sender's device, data type or data amount.
Receiving data via infrared communication Receiving 1 item the Home screen, tap , 1 From then tap [Infrared]. 2 Tap [Receive]u[OK]. receiving is complete, tap 3 When [OK]u[OK]. ■ Receiving all items the Home screen, tap , 1 From then tap [Infrared]. ❖Information ･ ■ 2 3 4 ･ ･ ･ ･ 1 item of data can be received using infrared communication widget. From the Home screen, tap of (infrared communication widget) and follow the onscreen instructions.
Within 10 meters, turn off either the Bluetooth device or the wireless LAN device. * The terminal does not communicate wirelessly with all types of Bluetooth devices. Bluetooth DUN is not supported. ･ Using Bluetooth function Bluetooth function is a technology which enables to connect with Bluetooth device such as PC, handsfree headset wirelessly. To communicate with Bluetooth device, turn Bluetooth function on and pair or connect the terminal and the Bluetooth device.
For make pair setting, entering passcode (PIN) may be required. Passcode (PIN) of the terminal is "0000". If you cannot make pair setting when you enter "0000", see the documentation of your Bluetooth device. ･ Once you made pair settings by entering passcode (PIN), you do not need to enter the passcode (PIN) when connecting with the paired Bluetooth device next time. ･ For Bluetooth profiles compatible with the terminal, see "Main specification" (P.275).
5 Check a passkey on the "Bluetooth pairing request" screen, then tap [Pair]. You can use the Bluetooth device that has been paired. ･ Some Bluetooth devices make connections continuously after making pair setting. ･ Authentication passcode (PIN) may be required on the "Bluetooth pairing request" screen. 4 Tap the name of Bluetooth device you want to connect. ･ ･ ❖Information Make sure that the Bluetooth function and Bluetooth detection function of the target device are on.
Canceling the pair setting of a Bluetooth device 1 2 From the Home screen, tap and tap [Settings]u[Bluetooth]. Tap in a Bluetooth device name to unpair and tap [Unpair]. ･ Connection disconnects and the pair setting is canceled. Sending data via Bluetooth function 1 Select "Bluetooth" from the sharing menu of each application. 2 Tap the other party's Bluetooth device. ･ When sending is complete, a message indicating that the data is sent appears.
Using NFC communication Sending/receiving data by onetouch function You can send/receive data to/from a device with NFC such as a mobile phone. If you use the one-touch function with a Sony product with NFC, simple operations allow you to send or receive images, music, photos or videos taken with the terminal. Operations to send/receive and available data to send/receive depend on the compatible applications. Follow the onscreen instructions.
❖Information ･ Alternatively, from the Home screen, use NFC Quick Launch to enable/disable NFC Reader/Writer, P2P function. Sending data 1 Make sure that the NFC Reader/ Writer, P2P function is enabled. 2 3 Display data to send on the screen. Face the marks on the terminal and the receiver’s terminal each other. ･ 4 The displayed screen becomes small, and "Touch to beam" appears. Tap the screen. Receiving data 1 2 Make sure that the NFC Reader/ Writer, P2P function is enabled.
External device connection Connecting to PC Connecting to a PC with microUSB cable By connecting the terminal and a PC with the Micro USB Cable 01 (optional), the internal storage and a microSD card in the terminal are recognized by the PC and you can operate such as copying, moving, deleting the data. ･ You may not be able to copy, move, delete, etc. copyrighted data of images, music, etc. ❖Information The following operating systems (OS) are supported.
❖Information Install PC Companion USB connection mode TRUSTED DEVICES Display PC Companion installation wizard when connected to a PC (P.272). Switch USB connection mode to "Media transfer mode (MTP)"/ "Mass storage mode (MSC)" when connecting to a PC. Connect the terminal and a host device in a pair via Wi-Fi network (P.243). When you connect the terminal to a PC switching USB connection mode to "Mass storage mode (MSC)", you cannot access the microSD card on the terminal.
Using Media Go The Media Go computer application helps you transfer and manage media content in the terminal and PC. With Media Go, you can load music from a CD to a PC and transfer to the terminal. ･ You can install Media Go from PC Companion. Activate PC Companion installed in a PC and install Media Go with "Sony PC Companion" screen. For information on how to install PC Companion, see "When PC Companion is not installed on your PC" (P.272).
5 Right-click the portable device icon, then click " ネットワーク構成 (Network composition)". 6 7 Click " 次へ (Next)". On the pop-up screen of the terminal, tap [Pair]. 8 On the " ポータブルデバイスのネット ワーク構成 (Network composition of the portable device)" screen of the PC, click " 完了 (Done)". Disconnect the microUSB cable. From the Home screen, tap and tap [Settings]u[Xperia™]u [USB Connectivity]u"Host name" (PC name) in the "TRUSTED DEVICES" field. 9 10 11 Tap [Connect].
Setting Media server 1 From the Home screen, tap , then tap [Settings]u[More...]. 2 Tap [Media server settings]. ･ Media server settings screen appears. You can set the following items. SO-02F Rename the terminal (server) Change server displayed on a client device. name Share content Set to connect from a client device to the terminal via Wi-Fi. PENDING Manage client devices waiting DEVICES access permissions. REGISTERED Manage client devices registered to DEVICES the terminal.
Connecting to other devices Connecting TV and activating application from TV launcher 2 Switch the TV to MHL input mode. 3 Flick an icon left or right to select application you want to use. ･ Connect the terminal with the Home screen or Application screen displayed to a TV using an MHL cable. ･ ■ When the Home screen is displayed ･ Activate TV launcher automatically. ･ ･ ･ ･ ･ ･ ■ When Application screen is displayed ･ , appears on the status bar.
･ You can operate the TV Launcher screen, the Home screen or applications using a TV remote controller if connecting the following devices. - MHL compatible TV supporting Remote Control Protocol (RCP) - HDMI compatible TV supporting Consumer Electronic Control (CEC) To connect to an HDMI compatible TV, a commercially available HDMI connector (MHL adapter) compatible with RCP is required. Some applications may not support remote control operations.
International roaming Overview of International roaming (WORLD WING) With the international roaming (WORLD WING), you can use the terminal without changing phone number or mail address in the service area of the overseas network operator affiliated with DOCOMO. You do not need to change the settings of call and SMS. ■ Supporting networks The terminal is Class 4. The terminal works in a 3G roaming area and GSM/GPRS service area.
Before using Before leaving Japan To use the terminal overseas, check the following in Japan. ■ Subscription ･ ■ Charging ･ ■ Check if you subscribe WORLD WING. For details, contact "General Inquiries" on the last page. For AC adapter for charging overseas travel, use optional "AC Adapter 03" or "AC Adapter 04". Usage charge Overseas usage charges (call and packet communication) differ from those in Japan. ･ Some applications perform communication automatically.
After arriving overseas When you arrive overseas and turn on the terminal, an available network is automatically set. Connectivity When you have set "Search mode" to "Automatic" in "Service providers" settings, optimized network is automatically selected (P.251). When you use a network operator of a country/region covered by the flat-rate service, you can use the service with flat-rate packet communication charges overseas up to the specified upper limit per day.
After returning to Japan Setting a network operator When you return to Japan, the terminal is connected to DOCOMO network automatically. If connection is failed, perform the following operations. ･ Set "Network Mode" to "LTE (preferred)/ WCDMA/GSM" (P.251). ･ Set "Search mode" to "Automatic" in "Service providers" settings (P.251). 1 From the Home screen, tap then tap [Settings]. 2 Tap [More...]u[Mobile networks]u[Service providers].
Making/receiving calls in the country you stay When you arrive overseas and turn on the terminal, an available network is automatically set. ･ Check that the battery and signal levels are high enough. ･ Depending on the network operator, even if the Caller ID notification is active, the caller ID may not be notified or appear properly. In this case, calls cannot be made from the call log. You can make a call from overseas using the international roaming service.
Making a call within the country you stay Receiving a call in the country you stay You can make a call by entering the phone number of the other party's land-line phone or mobile phone in the same way you do in Japan. 1 2 3 4 From the Home screen, tap then tap "Dial" tab. Enter a phone number. ･ You can receive a call using the international roaming service. 1 While receiving a call, touch and hold (left) and drag it to (right). 2 When the call is finished, tap [End call].
･ Having someone make a call from other than Japan to the country you stay. You have to receive a call through Japan no matter where you are; therefore, the other party needs to enter the international call access code and "81" (Country code of Japan). International access code - 81 - 90 (or 80) - XXXX - XXXX International roaming settings 2 Tap [Call settings]u[Roaming settings]. 3 Tap [Restricting incoming calls].
Setting roaming guidance 1 From the Home screen, tap then tap . 2 Tap [Call settings]u[Roaming settings]. Tap [Roaming guidance]. 3 ･ Auto conversion , Country code International prefix Select items you want to use. Activate roaming guidance Deactivate roaming guidance Check settings Tap [OK] to activate roaming guidance. Tap [OK] to deactivate roaming guidance. Check the current service settings. Setting international dial assistance Set network service such as voice mail from overseas.
Voicemail Activate (charged) service Deactivate service Play messages Settings Ring time setting Incoming call notific. (charged) Caller ID request (charged) Roaming guidance (charged) Remote operation (charged) Activate Call forwarding service (charged) Deactivate service Check settings Tap [OK].* Tap [OK].* Tap [OK]. After this step, follow the voice prompts to play the message. Tap [OK].* Tap [OK].* Tap [OK].* Tap [OK].* Tap [OK].* Tap [OK].* Tap [OK].* Tap [OK].* Tap [OK].
Appendix/Index Optional and related devices A variety of optional devices allows you to expand the terminal's capabilities by supporting a wide range of purpose, including personal and business uses. Some accessories are only available in some areas. For details, please contact a sales outlet such as docomo Shop. For details on optional devices, see the user's manual of each device.
Check if the adapter cable and the terminal are set correctly. → P.34 ･ When using the AC Adapter 04 (optional), check if the microUSB plug of the AC adapter is connected to the terminal or supplied desktop holder correctly.→ P.33, P.34 ･ In case of using the desktop holder, are the terminal's contacts for the desktop holder dirty? Clean the contacts with a dry cotton swab etc. if they are dirty. ･ When using Micro USB Cable 01 (optional), check if the PC is turned on.
Power discontinuity/rebooting occurs. ･ If terminals of battery pack is soiled, connection gets worse and it may cause power to be turned off. When it is soiled, clean the terminals of the battery pack with a dry cotton swab etc. Operations are not possible when tapping or pressing keys. ･ Check if the power is turned off. → P.36 ･ Check if you activate the screen lock. → P.
* Some widgets that you created may be removed. * Safe mode is not a normal booting state. To use ordinarily, exit the safe mode. ･ Developer options are designed for developers. If you set them, the terminal or applications may not be operated correctly. Applications cannot be operated properly (applications cannot be activated, or errors occur frequently). ･ Are there any applications being disabled? Enable disabled applications, then retry.→ P.212 ■ Calls are not connected.
■ Sound ■ During a voice call, the distant party's voice is hard to listen to or too loud. ･ Check if the listening volume of the sound volume setting is changed. → P.99 ■ ■ Watching 1Seg is unavailable. ･ Are you out of terrestrial digital TV broadcasting service area or in a place where airwave is weak? ･ Is channel set? → P.144 Display data Images or ringtones set in each feature do not work and the terminal operates in the default data.
Cannot receive calls overseas. ･ Is "Restricting incoming calls" set to "Activate restricting"? → P.254 No caller ID is notified/A notified caller ID is different from that of the caller/ Functions for using contents saved in phonebook or those using Caller ID notification do not operate. ･ Even if a caller notifies its caller ID, it is not displayed on the terminal unless the network or network operator notifies it.
■ Bluetooth function The terminal cannot be connected to a Bluetooth communication device/A Bluetooth communication device cannot be found from the terminal. ･ Make Bluetooth communication device (commercial item) registering stand-by state and then register the device on the terminal.
Error messages ● No service ･ The terminal is out of service area, or the received signal is too weak. Move to a location where radio signal can be reached. ･ The docomo mini UIM card is not working properly. Insert the docomo mini UIM card in another terminal. If this works, it is probably the terminal that is causing the problem. In this case, contact "Repairs" on the last page of this manual (in Japanese only). Removing and inserting docomo mini UIM card may improve the problem.
Smartphone Anshin Remote Support By sharing screens of your terminal with NTT DOCOMO, you can receive technical support to make settings (in Japanese only). ･ This service is not available when your docomo mini UIM card is not inserted, during international roaming, or in Airplane mode. ･ Smartphone Anshin Remote Support is a service requiring subscription. ･ Some operations and settings are not supported. ･ For details on Smartphone Anshin Remote Support, refer to NTT DOCOMO website.
Warranty and After Sales Services Warranty Make sure that the warranty is received with the terminal upon purchase. Check to be sure that " 販売店名・お買い上げ日 (the name of the retailer, date of purchase)", and other items have been filled out on the warranty before storing it in a safe place. If any necessary information is not provided, immediately contact the retailer and request to complete the warranty. The terminal comes with a year's free warranty starting from the date of purchase.
･ ■ Note that repair may be refused in the following cases: ･ ■ Malfunction due to use of devices and consumable parts other than those specified by DOCOMO will only be repaired at the owner's expense, even if the warranty period is still effective. When the terminal has corrosion due to wet by liquid, condensation, perspiration, etc. or the internal circuit board is damaged or deformed (we may not be able to repair when the microUSB jack, headset jack, liquid crystal, etc.
Malfunction and damage due to modifications will be repaired at the owner's expense, even if the warranty period is still effective. ● Do not remove the inscription sticker on the terminal. ･ Note that if the inscription sticker is removed or is replaced with a different sticker, it may disqualify the terminal from repairs. ● Note that the settings and other information may be reset (cleared) as a result of malfunction, repair or other handling. In this case, make the settings again.
Updating software It is a function to connect network to check if software update for SO-02F is required, then update software if required. You can check if software update is required on NTT DOCOMO, INC. website. ･ There are following 3 methods for software update. - Automatic Update : Update file is downloaded automatically and write it at the set time. When the rewrite start time is not set, software is automatically rewritten between 2 a.m. and 5 a.m. - Immediate Update : Update immediately.
If software update is not needed, "No update is needed." appears. ･ During international roaming or when the terminal is out of service area, "When docomo network is not available, or during roaming, software update is not available even if Wi-Fi is connected." or "When docomo network is not available, or during roaming, install cannot be started even if Wi-Fi is connected." appears. The same messages appear even while connecting via Wi-Fi. ･ SMS sent during software update is stored in the SMS center.
2 Perform a target operation. [OK] : Go to the Home screen. Updating starts when the preset time is reached. ･ "Set Time" : Reserved update → "Reserving software update" (P.272) ･ "Start update" : Update immediately → "Updating software immediately" (P.271) ･ 2 For activating from Software update notice screen, display the Software update notice screen and tap [Start update]. ･ "Ready for update. Please refrain from starting other application." is displayed, then rewriting starts automatically.
Reserving software update If (Software update was suspended Please check the status of the handset and retry.) appears on the status bar during software update, make sure that the terminal is not in the following states and retry to update. - No signal - The battery pack is removed - Interfered by some function ･ You can preset time to update the software if you want to specify another time for installing the update file. 1 Display the Software update notice screenuTap [Set Time].
3 Follow the onscreen instructions on the PC to install. ･ PC Companion starts on the PC after the installation is complete. If further software update is searched, it is automatically notified. Follow the onscreen instructions on the PC. When PC Companion is installed on your PC 1 Check if PC Companion is activated on the PC. If not, activate PC Companion from the Start menu. 2 Connect the terminal to a PC using a microUSB cable. 3 Follow the onscreen instructions on the PC.
AC Adapter 04 Approx. 160 min. (for Desktop Holder SO17 combination use : approx. 150 min.) AC Adapter 03 Approx. 210 min. (for Desktop Holder SO17 combination use : approx. 210 min.) DC Adapter 03 Approx. 230 min. 1Seg watching time Approx. 320 min. Mobacas watching time Approx. 250 min. Display Type TFT16,777,216 colors Size Approx. 4.6 inch Number of dots Horizontal 720 dots× Vertical 1280 dots Image Type Camera : Backsidepickup illuminated CMOS device Front camera : CMOS Size Camera : 1/3.
Bluetooth Supported Bluetooth version Radio power Headset jack Available communication distance*4 Supported Bluetooth profile*5 Size Number of pole Compliant with Bluetooth standard Ver. 4.0*3 Bluetooth standard Power Class 1 Within approx. 10 m HFP, HSP, OPP, SPP, HID, A2DP, AVRCP, PBAP, HDP, PXP, MAP, DID Diameter 3.
■ File format The terminal supports the display or playback of the following file format: Type Sound Still image* Video File format WAV (PCM, G.711) (.wav), AAC (.3gp, .m4a, .mp4), AAC+ (.3gp, .m4a, .mp4), eAAC+ (.3gp, .m4a, .mp4), MP3 (.mp3), AMR-NB (.3gp), AMR-WB (.3gp), MIDI (SP-MIDI/GM/ GML (.mid), XMF (.xmf ), Mobile XMF 1.0 (.mxmf ), RTTTL/RTX (.rtttl, .rtx), OTA (.ota), iMelody (.imy)), Ogg Vorbis (.ogg), FLAC (.flac), PIFF (.isma) JPEG (.jpeg, .jpg), GIF (.gif ), PNG (.png), BMP (.bmp), WEBP (.
Portuguese (Portugal)/Romanian/Albanian/ Slovak/Slovene/Serbian/Finnish/Swedish/ Tagalog/Vietnamese/Turkish/Greek/ Bulgar/Kazakh/Macedonian/Russian/ Ukrainian/Hindu/Bengalee (Bangladesh)/ Bengalee (India)/Thai/Korean/Telugu/ Kannada/Malayalam/Marathi/Tamil/ Chinese (Traditional)/Chinese (Simplified)/ Chinese (Hong Kong) Language ■ Display language Japanese/Indonesian/Malay/Sundanese/ Bosnian/Catalan/Czech/Danish/German (Germany)/German (Liechtenstein)/ German (Austria)/German (Switzerland)/ Esthonian/Engl
■ Text language (Voice input) Japanese/Icelandic/Afrikaans/Arabic (United Arab Emirates)/Arabic (Israel)/ Arabic (Egypt)/Arabic (Qatar)/Arabic (Kuwait)/Arabic (Saudi Arabia)/Arabic (Jordan)/Arabic (Lebanon)/Arabic (Bahrain)/ Arabic (Oman)/Arabic (Palestine)/Italian/ Greek/Indonesian/Dutch/Catalan/Galician/ Swedish/isiZulu/Spanish (United States)/ Spanish (Argentina)/Spanish (Uruguay)/ Spanish (Ecuador)/Spanish (El Salvador)/ Spanish (Guatemala)/Spanish (Costa Rica)/ Spanish (Colombia)/Spanish (Spain)/ Span
End User Licence Agreement End User Licence Agreement Software delivered with this device and its media is owned by Sony Mobile Communications AB, and/or its affiliated companies and its suppliers and licensors. Sony Mobile grants you a non-exclusive limited licence to use the Software solely in conjunction with the Device on which it is installed or delivered. Ownership of the Software is not sold, transferred or otherwise conveyed.
About Open Source Software About Open Source Software This product includes certain open source or other software originating from third parties that is subject to the GNU General Public License (GPL), GNU Library/Lesser General Public License (LGPL) and different and/or additional copyright licenses, disclaimers and notices. The exact terms of GPL, LGPL and some other licenses, disclaimers and notices are reproduced in the about box in this product and are also available at http:// opensource.sonymobile.
Intellectual Property Right About the Copyright and Portrait rights Copyrighted contents you recorded or obtained from sites or Internet home pages using this product by downloading or other means, such as documents, images, music data, software, are prohibited from reproduction, transformation and transmission over public lines without consent of the copyright holders, unless intended for personal use or any other purpose permitted by law.
Rovi, G-GUIDE, G-GUIDE MOBILE and their logos are trademarks or registered trademarks in Japan of U.S. Rovi Corporation and/or its affiliates. ･ " モバキャス " is a trademark of Japan Mobilecasting, Inc. ･ "NOTTV" is a trademark of mmbi, Inc. ･ "Xperia"and "TrackID" are trademarks or registered trademarks of Sony Mobile Communications AB. ･ "Media Go" is a trademark or registered trademark of Sony Media Software and Services.
MHL, HDMI logo and HighDefinition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ･ "Microsoft", "Windows", "Outlook", "Windows Vista", "Windows Server", "Windows Media", "PlayReady" and "ActiveSync" are trademarks or registered trademarks of Microsoft Corporation in the United States and other countries. ･ This product contains technology subject to certain intellectual property rights of Microsoft.
SIM unlock This terminal supports SIM unlock. If you release SIM lock, you can use SIM by a carrier other than NTT DOCOMO. ･ The SIM unlock service is provided at a docomo Shop. ･ A SIM unlock charge is separately required. ･ If you use a SIM other than by DOCOMO, LTE system is not available. Available services and functions will be limited. DOCOMO is not liable to any failures or malfunctions. ･ For details of SIM unlock, refer to NTT DOCOMO website.
Index A About phone ････････････････････････ 228 Access point Initializing ･････････････････････････ 205 Setting････････････････････････････ 204 Accessibility ･････････････････････････ 227 Account Auto-sync ･････････････････････････ 226 Removing ･････････････････････････ 225 Setting････････････････････････････ 223 Adjusting sound volume ･･･････････････ 206 Airplane mode ･･･････････････････････ 200 Alarm & clock ････････････････････････ 188 Setting alarm ･･････････････････････ 189 Album ･････････････････････
Reminders ･････････････････････････ 188 Call･･････････････････････････････････ 96 Calling screen ･･･････････････････････ 99 Declining ･･･････････････････････････ 98 Ending ････････････････････････････ 100 Hold･･･････････････････････････････ 99 Making ････････････････････････････ 96 Mute ･････････････････････････････ 100 Receiving ･･････････････････････････ 98 Speaker ････････････････････････････ 99 Call forwarding service ･････････････････ 102 Call history ･･････････････････････････ 100 Adding to Phonebook
docomo apps password ････････････････ 215 docomo backup ･･････････････････････ 191 docomo mini UIM card ･･････････ 19, 30, 217 docomo service ･･････････････････････ 215 docomo voice input ･････････････ 58, 60, 78 docomo Wi-Fi Easy Connection ･･･････････ 54 E Early Warning "Area Mail"･･･････････････ 126 Earpiece volume ･･････････････････････ 100 Email ･･･････････････････････････････ 118 Deleting ･･････････････････････････ 121 Forwarding ････････････････････････ 120 Initial settings ･･････････････････････ 11
Infrared communication ･･･････････････ 233 Infrared data port ････････････････ 29, 233 Initial settings ･････････････････････････ 39 Input support ･････････････････････････ 77 Internal storage ･･････････････････････ 210 International call ･･･････････････････ 98, 253 International roaming service ･･･････････ 249 International roaming setting ･･･････････ 255 IrDA (Infrared communication) ･･････････ 233 J Japanese syllabary keyboard ･････････････ 70 K Kanji handwriting input ･････････････････ 73 Key icons ･･
Notification sound ････････････････････ 207 Nuisance call blocking service ･･･････････ 102 O OfficeSuite ･･････････････････････････ 193 Osaifu-Keitai ･････････････････････････ 134 NFC/Osaifu-Keitai Lock Settings ･･･････ 137 Own number ････････････ 6, 105, 110, 228 P PC Companion ･･････････････････ 243, 273 Personal Unblocking Key (PUK code) ･････ 218 Phone language ･･････････････････････ 222 Phonebook ･･････････････････････････ 104 Accounts to display ･････････････････ 107 Adding a new entry ･････････････
S Schedule ･････････････････････････････ 54 Screen lock ･･･････････････････････ 38, 219 Changing ･････････････････････････ 220 Setting････････････････････････････ 219 Unlocking ･････････････････････････ 220 Screen mirroring ･･････････････････････ 214 Screenshot ･･･････････････････････････ 42 Searching ････････････････････････････ 58 Voice search ････････････････････････ 58 Second call settings ･･･････････････････ 103 Security ･････････････････････････････ 216 Security code Network security code ････････････
USB connection ･･･････････････････ 36, 242 USB keyboard ･････････････････････････ 83 USB storage･･････････････････････････ 210 Format ････････････････････････････ 211 V Vibration ･･････････ 42, 116, 121, 189, 207 Viewing photos ･･････････････････････ 175 Voice input ･･････ 58, 64, 67, 70, 72, 74, 78 Voice mail service ･････････････････････ 102 Voice Search ･･････････････････････････ 53 VPN ････････････････････････････････ 201 W WALKMAN ････････････････････････････ 51 Wallpaper ･････････････････････････ 50
Make various applications or charge your billing plan, check your charges and points, and more online. sp-mode: dmenu ⇒ " お客様サポート (Customer support)" ⇒ " 各種お申込・お手続き (Various applications/procedures)" (Packet communication free) (In Japanese only) PC: My docomo (http://www.mydocomo.com/) ⇒ 各種お申込・お手続き (Various applications/procedures) (In Japanese only) * When using with sp-mode, "Network security code" is required. * When using with sp-mode, you may be charged.
General Inquiries 0120-005-250 (toll free) Repairs ■From DOCOMO mobile phones (In Japanese only) (No prefix) 113 (toll free) *Service available in: English, Portuguese, Chinese, Spanish. *Unavailable from part of IP phones. (Business hours: 9:00 a.m. to 8:00 p.m.) *Unavailable from land-line phones, etc. ■From DOCOMO mobile phones (In Japanese only) (No prefix) 151 (toll free) ■From land-line phones (In Japanese only) *Unavailable from land-line phones, etc.
