User Guide

Smart Connect
Indexterm: "Smart Connect"
GUID GUID-68FE7B74-814F-4E9E-8C87-1B9327458760
Title Smart Connect - Heading only
Changes fix a typo
Version 2
Author Gan Lu
Status Released
About Smart Connect
Indexterm: "Smart Connect"
Use the Smart Connect application to set what happens in your device when you
connect or disconnect an accessory. You can also use it to set a specific action or a
group of actions to launch on your device at certain times of the day.
For example, when you connect your headset or headphones, you can set an event
so that the following actions are launched on your device:
•
Between 7am and 9am, when you commute to work, the "WALKMAN" application
starts, and the web browser opens the morning paper.
•
On the way back from work, the FM radio starts, and a notes app with your shopping
list opens.
GUID GUID-A6EEBEB7-3017-4A9F-B814-589329C68676
Title About Smart Connect
Changes for Pollux; change "WALKMAN player" to "WALKMAN application"
Version 2.1.1
Author Gan Lu
Status Released
To start the Smart Connect application
1
From your Home screen [homescreen_strings_application_name_txt] , tap ID: ICN-SONY-
HOME-APPTRAY-NORMAL.
2
Find and tap Smart Connect [app_name_smart_connect] .
GUID
GUID-C873A6A9-8D7B-46E0-A142-5F750C07A596
Title To start the Smart Connect application
Changes Created for Smart Connect v5.0.5
Version 1
Author Gan Lu
Status Released
To create a Smart Connect event
1
Start the Smart Connection application. If you are opening Smart Connect for
the first time, tap OK [ok] to close the introduction screen.
2
On the Events [event_tab] tab, tap ID: ICN-SONYNEW-WINDOW-HOLO-DARK.
3
Give the event a name, then tap Create [dlg_add_event_button_create] .
4
Under When [edit_event_triggers] , add either an accessory or a time interval, or both.
5
Under Do this [edit_event_start_actions] , add what you want to happen in your device.
6
Under At the end [edit_event_stop_actions] , add what you want to happen when you
disconnect the accessory or when the time interval comes to an end. If both
these conditions are set, the actions start either when you disconnect the
accessory, or when the time interval comes to an end.
7
To save the event, press ID: ICN-SONY-KEY-AND-BACK.
To add a Bluetooth™ accessory, you have to first pair it with your device.
GUID GUID-6FAC4C54-43FB-49B7-9629-446C10B5F912
Title To create a Smart Connect event
Changes Created for Smart Connect v5.0.5
Version 1
Author Gan Lu
Status Released
This is a draft publication for internal use only.
194
This is an Internet version of this publication. © Print only for private use.