User's Guide

49
Before Using the Terminal
1
Drag the status bar downwards.
2
Tap [Sound].
･
Tap to activate silent mode
(vibration) and tap to activate silent
mode (mute). Tap to cancel silent
mode.
❖
Information
･
Press and hold
P
for over a second and then tap
/ / in the pop-up screen to switch Mute
(Ringtone 0)/Vibrate/Off (disabling Silent mode).
･
From the Home screen etc., press and hold lower
part of
m
to set vibrator. While vibration is on,
press
m
to set to Mute (Ringtone 0). On the
unlock screen, during a call, or while the camera,
WALKMAN, Media Player, etc. is activated, pressing
and holding lower part of
m
does not set silent
mode.
･
Setting the phone to Silent mode does not mute
sounds for shutter, playback of video or music, alarm,
dialpad operation sound during a call or when [End
call] is tapped, etc. Note that adjusting volume for
"RINGTONE & NOTIFICATIONS" in Volumes (P.140) or
turning the volume up by pressing upper part of
m
cancels Silent mode.
You can save the current displayed screen as
an image (screen shot).
1
On the screen you want to capture,
press and hold
P
and lower part
of
m
for over a second at the
same time.
･
Screenshot is captured and appears
in the status bar.
❖
Information
･
You can also capture a screenshot by pressing and
holding
P
for over a second and then tapping
[Take screenshot].
･
Drag the status bar downwards and tap [Screenshot
captured.] on the Notification panel to check
captured images in the "Album" app. Tap [Share] to
attach captured images to an application to send or
to share them. "Share" may not appear depending on
notification status on the Notification panel.
Setting Silent mode Capturing screenshot