User's Guide

183
Applications
One-touch function is an original function
developed by Sony based on NFC
technology. You can send/receive data to/
from a device with NFC such as a mobile
phone. If you use the one-touch function
with a Sony product with NFC, simple
operations allow you to send or receive
images, music, photos or videos taken with
the terminal.
･
Enable NFC Reader/Writer, P2P function in
advance (P.183).
･
Place 2 mobile phones in parallel position and
point marks to each other. Do not move
them until sending/receiving is complete.
･
Operations to send/receive and available data
to send/receive depend on the compatible
applications. Follow the onscreen
instructions.
･
Even if marks are pointed to each other,
sending/receiving may be failed. If failed,
perform operations of sending/receiving
again.
･
When pointing marks to each other slowly,
sending/receiving may be failed.
･
The terminal does not communicate with all
NFC devices.
Enabling NFC Reader/Writer, P2P
function
1
From the Home screen, tap ,
then tap [Settings]
u
[More...].
2
[NFC/Osaifu-Keitai
settings]
u
[Reader/Writer,
P2P]
u
[OK].
･
"Reader/Writer, P2P" and "Android
Beam" are marked.
･
NFC Reader/Writer, P2P function is
enabled, and appears in the status
bar.
❖
Information
･
Alternatively, from the Home screen, use "NFC Quick
Launch" to enable/disable NFC Reader/Writer, P2P
function.
Sending/Receiving data by
one-touch function