User's Guide

132
Settings
4
Tap any of [Always]/[Only when
plugged in]/[Never (increases data
usage)].
❖
Information
･
When a Wi-Fi network is disconnected, connection is
automatically switched to a LTE/WCDMA/GSM
network mode.
Using Wi-Fi Direct compatible device
You can connect among the devices
compatible with Wi-Fi Direct via Wi-Fi even
without configuring access point.
1
From the Settings screen (P.128),
tap [Wi-Fi].
2
Tap and [ Wi-Fi Direct].
･
A list of detected Wi-Fi Direct devices
appears.
3
Select a Wi-Fi Direct compatible
device name to connect.
･
If a note appears, tap [OK].
･
Tap [Search for devices] to refresh the
detection list.
･
To change the terminal name displayed
on the detected Wi-Fi Direct
compatible device, tap [Rename
device].
❖
Information
･
To use the Wi-Fi Direct function, you need an
application compatible with Wi-Fi Direct function.
The function becomes available when you install a
compatible application.
･
If you start Wi-Fi Direct connection during Wi-Fi
connection, Wi-Fi connection is disconnected and
switched to packet communication (LTE/WCDMA/
GSM).
Connect Bluetooth device wirelessly using
Bluetooth function. For details on Bluetooth
communication, see "Using Bluetooth
function" (P.167).
Bluetooth